Journal of Composites Science, Volume 8, Issue 12

While ensuring thermal safety is critically required in the operation of the composite energetic material, the cutting temperature is a crucial parameter that must be investigated and controlled in its cutting process to avoid thermal explosion. In t...

Limestone-calcined clay (LC3) cement has emerged as a promising low-carbon alternative to ordinary Portland cement (OPC), offering significant potential to reduce carbon emissions while maintaining comparable mechanical performance. However, the abse...

During the past decade, there has been a continued increase in the demand for bone defect repair and replacement resulting from long-term illnesses or traumatic incidents. To address these challenges, tissue engineering research has focused on biomed...

The paper presents an overview of conductive polymer composites based on thermosetting materials, thermoplastics, and elastomers modified with carbon nanotubes (CNTs). To impart conductive properties to polymers, metal, carbon-dispersed materials, or...

This study demonstrates the improvement of core loss through the reduction of eddy current loss in soft magnetic composites (SMCs) composed of TiO2-coated Fe powder and epoxy resin. A thin and uniform TiO2 insulating layer was successfully deposited...

This article provides information on the processing of chromium-containing waste from the Aktobe ferroalloy compounds plant using chemical reagents followed by high-temperature heat treatment for the synthesis of a composite chromite pigment used in...

ABS plastic is an inexpensive material with attractive physical and chemical properties. Unfortunately, it is susceptible to degradation under UV radiation, so it limits the use of this material outdoors. In this paper, we demonstrate a low-cost appr...

In recent decades, the aviation industry has increasingly adopted composite materials for various aircraft components, due to their high strength-to-weight ratio and durability. To ensure the safety and reliability of these structures, Health and Usa...

The current study investigates the process of preparing and analysing porous-structured ceramics made from zirconium, aluminium, and magnesium ceramic oxides. The starch consolidation casting (SCC) technique, with different types of starches (potato...

The present study synthesized silver nanoparticles supported on a thermosensitive polymer with a core–shell structure, formed by a polystyrene (PS) core and a poly(N-isopropylacrylamide) (PNIPAM)/Poly(N, N-methylenebisacrylamide) (MBA) shell. The PS...