2022 March - 58 articles
In this study, we report the highly responsive chitosan-based chemically cross-linked nanomatrices, a nano-version of hydrogels developed through modified polymerization reaction for solubility improvement of poorly soluble drug simvastatin. The deve...
Geopolymer is a green non-metallic material with high strength and favorable properties in resistance to corrosion, fire, and high temperature, which makes it a potential substitute for Portland cement. The existing studies have primarily focused on...
Strain hardening, i.e., the nonlinear elastic response of materials under load, is a physiological response of biological tissues to mechanical stimulation. It has recently been shown to play a central role in regulating cell fate. In this paper, we...
Owing to the potential of sodium as an alternative to lithium as charge carrier, increasing attention has been focused on the development of high-performance electrolytes for Na batteries in recent years. In this regard, gel-type electrolytes, which...
Backfill mining is the only way to realize no-waste mining and create green mines, but complicated backfill mining technology, high mining costs, and low-production capacity greatly restrict its application in low-quality iron mines. To reduce the co...
The self-assembly of carbohydrate-based low molecular weight gelators has led to useful advanced soft materials. The interactions of the gelators with various cations and anions are important in creating novel molecular architectures and expanding th...
In the current study, a pH sensitive intelligent hydroxypropyl–β–cyclodextrin-based polymeric network (HP-β-CD-g-MAA) was developed through a solution polymerization technique for site specific delivery of cytarabine in the colo...
The aim of the study was to develop and evaluate the Ginkgo biloba nanocomplex gel (GKNG) as a long-acting formulation for the wound healing potential. Pharmaceutical analysis showed an average particle size of 450.14 ± 36.06 nm for GKNG, zeta...
Hydrogels play important roles in function materials, especially in wastewater treatment, that could solve the problems of microbial infections and dye pollutions. Herein, a natural glycyrrhetinic acid-derived gel was successfully constructed by form...
Mesenchymal stem cells (MSCs) possess immunomodulatory properties and capacity for endogenous regeneration. Therefore, MSC therapy is a promising treatment strategy for COVID-19. However, the cells cannot stay in the lung long enough to exert their f...
The removal of arsenate ions from aqueous solutions at near-neutral pH was carried out using chitosan-magnetite (ChM) hydrogel beads in batch systems. Equilibrium isotherms and kinetic studies are reported. Obtained equilibrium and kinetic data were...
Polymer gel is the most widely used plugging agent in profile control, whose formula and injected speed are very important process parameters. It is very significant to study the effect of shear rates on the dynamic gelation of polymer gel in porous...
Micro- and nanogels are being increasingly used to encapsulate bioactive compounds. Their soft structure allows large loading capacity while their stimuli responsiveness makes them extremely versatile. In this work, the complexation of DNA with therm...
Standard hydrogels prepared by free radical polymerization (FRP) have heterogeneous structures with a wide mesh size distribution, which affect their mechanical and separation properties. Recent research has identified four-armed poly(ethylene glycol...
Hyaluronic acid (HA) was functionalized with a series of amino synthons (octylamine, polyethylene glycol amine, trifluoropropyl amine, rhodamine). Sodium hyaluronate (HAs) was first converted into its protonated form (HAp) and the reaction was conduc...
To design a controlled drug release preparation based on a safe natural material, a Konjac glucomannan (KGM) mixture containing 16.0 w/w% calcium hydroxide (Ca(OH)2) was ground in a planetary ball mill for 0–120 min. The mechanochemical effect...
Transarterial radioembolization (TARE) is an emerging treatment for patients with unresectable hepatocellular carcinoma (HCC). This study successfully developed radiometal-labeled chitosan microspheres (111In/177Lu-DTPA-CMS) with a diameter of 36.5 &...
Three-dimensional (3D) printing is well acknowledged to constitute an important technology in tissue engineering, largely due to the increasing global demand for organ replacement and tissue regeneration. In 3D bioprinting, which is a step ahead of 3...
This in vitro study evaluated color change, mineral content, and morphology of enamel, pH and cytotoxicity of experimental bleaching agents containing 35% hydrogen peroxide (HP), titanium tetrafluoride (TiF
There is a great demand for biodegradable hydrogel, and cellulose enriched wastes materials are widely used to serve this purpose for various advance applications (e.g., biomedical and environmental). Sugarcane bagasse is cellulose-enriched agro-wast...
Tongue cancer is one of the most common carcinomas of the head and neck region. The antitumor activities of statins, including lovastatin (LV), and the essential oil of eucalyptus (Eu oil), have been adequately reported. The aim of this study was to...
Immediate dentin sealing (IDS) involves applying an adhesive system to dentin directly after tooth preparation, before impression. This was considered an alternate to delayed dentin sealing (DDS), a technique in which hybridization is performed follo...
Active pharmaceutical ingredients (API) or drugs are normally not delivered as pure chemical substances (for the prevention or the treatment of any diseases). APIs are still generally administered in prepared formulations, also known as dosage forms....
Nanotechnology has the potential to generate advancements and innovations in formulations and delivery systems. This fast-developing technology has been widely exploited for diagnostic and therapeutic purposes. Today, cosmetic formulations incorporat...
A viscoelastic rheometer was equipped with a sono-device and a water bath to enable measurement of storage moduli G′ and loss moduli G″ of biomass polysaccharide hydrogels such as Kanten agarose, κ-carrageenan, and konjac glucomanna...
Dextransucrases released by certain lactic acid bacteria form glucose polymers with predominantly α-1,6-linkages and may be exploited biotechnologically for the tailored production of polysaccharides with application potential. Despite releasin...
The aim of this study was to investigate the potential of Linum usitatissimum mucilage, a natural polymer, in developing a sustained release hydrogel for orally delivered drugs that require frequent dosing. For this purpose, nicorandil (a model drug)...
Localized intra-periodontal pocket drug delivery using an injectable in situ forming gel is an effective periodontitis treatment. The aqueous insoluble property of rosin is suitable for preparing a solvent exchange-induced in situ forming gel. This s...
Polysaccharides are attractive gelling agents in pharmacy due to their safety, biocompatibility, biodegradability, relatively easy way of preparation, and low price. Due to their variable physical-chemical properties, polysaccharides have potentialit...
Hydrogels are three-dimensional, cross-linked, and supramolecular networks that can absorb significant volumes of water. Hydrogels are one of the most promising biomaterials in the biological and biomedical fields, thanks to their hydrophilic propert...
Gel syneresis is a common problem in gel treatment for oil recovery applications. In this study, a stable gel was prepared in a soft brine by using a water-soluble phenolic resin as a crosslinker, nanoparticles as a stabilizer, and partially hydrolyz...
Advanced SiO2–Al2O3 aerogel materials have outstanding potential in the field of thermal insulation. Nevertheless, the creation of a mechanically robust and low-cost SiO2–Al2O3 aerogel material remains a considerable challenge. In this st...
Multifunctional biomedical materials capable of integrating optical functions are highly desirable for many applications, such as advanced intra-ocular lens (IOL) implants. Therefore, poly(ethylene glycol)-diacrylate (PEG-DA) hydrogels are used with...
Chronic osteomyelitis is mostly caused by bacteria such as S. aureus, and is often treated with oral antibiotics or injections to suppress the bacteria. In severe cases, however, surgical treatment using antibiotic beads and metal supports may be req...
The microwave-assisted carboxymethylation of agar to improve its physicochemical properties was investigated. Microwave power, reaction time, and temperature, ethanol concentration, and amounts of chloroacetic acid and sodium hydroxide were assessed...
Styrene-butadiene rubber (SBR) is a synthetic polymer primarily used in the tire industry, due to its good collaborative properties with additives and fillers. In the present work, we aim to synthesize an SBR composite reinforced with graphene oxide...
(1) Background: to date, a clear description of the impact of specific enzymes on the enzyme-modified cheese (EMC) flavor is lacking. Moreover, comparative studies on the aroma compounds’ intensity of EMC have been rarely investigated. Therefor...
Interfacial interaction amongst the antidepressant drug-imipramine hydrochloride (IMP) and pharmaceutical excipient (triton X-100 (TX-100-nonionic surfactant)) mixed system of five various ratios in dissimilar media (H2O/50 mmol·kg−1 NaC...
Dead space after rectal resection in colorectal surgery is an area with a high risk of complications. In this study, our goal was to develop a novel 3D implant based on composite hydrogels enriched with fractionalized nanofibers. We employed, as a no...
Organogels are a very diverse and fascinating class of soft materials that, over the last 30 years, have evolved to be one of the most interesting subjects in materials science [...]
The discharge of untreated wastewater, often contaminated by harmful substances, such as industrially used dyes, can provoke environmental and health risks. Among various techniques, the adsorption of dyes, using three-dimensional (3D) networks consi...
In the current research work, pH-sensitive hydrogels were prepared via a free radical polymerization technique for the targeted delivery of 5-aminosalicylic acid to the colon. Various proportions of chitosan, β-Cyclodextrin, and acrylic acid wer...
Organic acids, including acetic acid, are the metabolic products of many microorganisms. Acetic acid is a target product useful in the fermentation process. However, acetic acid has an inhibitory effect on microorganisms and limits fermentation. Thus...
In the current study, flexible films of polyvinyl alcohol (PVA): chitosan (CS) solid polymer blend electrolytes (PBEs) with high ion transport property close enough to gel based electrolytes were prepared with the aid of casting methodology. Glycerol...
To resolve the limited large-scale methods of disposal of low calcium fly ash with poor activity, based on the double excitation principle, clinker and desulfurized gypsum are used as alkali/salt activators to activate fly ash and slag, avoiding the...
Starch-based hydrogels are natural polymeric structures with high potential interest for food, cosmeceutical, and pharmaceutical applications. In this study, the physical stability of starch-based hydrogels produced via high-pressure processing (HPP)...
The ocean is a complex polymer solution [...]
The generation of hepatic spheroids is beneficial for a variety of potential applications, including drug development, disease modeling, transplantation, and regenerative medicine. Natural hydrogels are obtained from tissues and have been widely used...
Conventional microcarriers used for expansion of human mesenchymal stem cells (hMSCs) require detachment and separation of the cells from the carrier prior to use in clinical applications for regeneration of articular cartilage, and the carrier can c...
Hydrogel, a special system of polymer solutions, can be obtained through the physical/chemical/enzymic crosslinking of polymer chains in a water-based dispersion medium. Different compositions and crosslinking methods endow hydrogel with diverse phys...
of 2
