Next Article in Journal
Ecologically Engineered Systems for Treating Agriculture Runoff by Integrating “Wastes” into Constructed Wetlands
Next Article in Special Issue
Supervision and Control System of the Operational Variables of a Cluster in a High-Pressure Gas Injection Plant
Previous Article in Journal
Polycaprolactone with Glass Beads for 3D Printing Filaments
Previous Article in Special Issue
Reservoir Advanced Process Control for Hydroelectric Power Production
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Study on the Influencing Factors of the Response Characteristics of the Slide Valve-Type Direct-Acting Relief Valve with External Orifice

1
Department of Mechanical Design, School of Mechanical Engineering, Guizhou University, Guiyang 550025, China
2
Department of Water Resources and Hydropower Engineering, College of Civil Engineering, Guizhou University, Guiyang 550025, China
*
Author to whom correspondence should be addressed.
Processes 2023, 11(2), 397; https://doi.org/10.3390/pr11020397
Submission received: 23 December 2022 / Revised: 21 January 2023 / Accepted: 22 January 2023 / Published: 28 January 2023
(This article belongs to the Special Issue Automation Control Systems & Process Control for Industry 4.0)

Abstract

The slide valve-type direct-acting relief valve with external orifice (SVTDARVWEO) is widely used in hydraulic systems, and its response characteristics are influenced by key factors. It is of great significance to carry out research on the influencing factors of the response characteristics of the SVTDARVWEO. The working principle of the SVTDARVWEO is analyzed in the present study. The simulation model of the SVTDARVWEO is established using AMESim. The influence of the orifice diameter, viscosity coefficient, valve element mass, spring stiffness, oil seal length, and valve element diameter on the response characteristics of the SVTDARVWEO is studied. The results show that: (1) The smaller the orifice diameter is, the smaller the oscillation frequency, amplitude and maximum overshoot of pressure, flowrate, displacement and velocity are. (2) When the viscosity coefficient is 50 N/(m/s), 55 N/(m/s) and 60 N/(m/s), the pressure, flowrate, displacement and velocity oscillate periodically, but the amplitude of the oscillation decreases gradually, and the oscillation frequency is 250 Hz. When the viscosity coefficient is 60 N/(m/s), the pressure, flowrate, displacement and velocity will reach their respective stable values earlier. (3) When the valve element mass is 0.01 kg, 0.015 kg and 0.02 kg, the pressure, flowrate, displacement and velocity oscillate periodically, but the amplitude of oscillation decreases gradually. When the valve element mass is 0.01 kg, the pressure, flowrate, displacement and velocity will reach the stable value earlier. (4) The smaller the spring stiffness is, the greater the maximum overshoot of pressure, flowrate, displacement and velocity is, and the higher the number of oscillations to reach the stable value are, in addition to more time being required. (5) With the increase in oil seal length, the maximum overshoot of pressure and velocity, stability value of displacement also increase correspondingly. (6) With the increase in the valve element diameter, the stable value of pressure decreases, and the oscillation frequency of pressure, flowrate, displacement and velocity increase, but the oscillation amplitude decreases.
Keywords: SVTDARVWEO; AMESim; response characteristics; influencing factors SVTDARVWEO; AMESim; response characteristics; influencing factors

Share and Cite

MDPI and ACS Style

Liu, H.; Zhao, Q. Study on the Influencing Factors of the Response Characteristics of the Slide Valve-Type Direct-Acting Relief Valve with External Orifice. Processes 2023, 11, 397. https://doi.org/10.3390/pr11020397

AMA Style

Liu H, Zhao Q. Study on the Influencing Factors of the Response Characteristics of the Slide Valve-Type Direct-Acting Relief Valve with External Orifice. Processes. 2023; 11(2):397. https://doi.org/10.3390/pr11020397

Chicago/Turabian Style

Liu, Huiyong, and Qing Zhao. 2023. "Study on the Influencing Factors of the Response Characteristics of the Slide Valve-Type Direct-Acting Relief Valve with External Orifice" Processes 11, no. 2: 397. https://doi.org/10.3390/pr11020397

APA Style

Liu, H., & Zhao, Q. (2023). Study on the Influencing Factors of the Response Characteristics of the Slide Valve-Type Direct-Acting Relief Valve with External Orifice. Processes, 11(2), 397. https://doi.org/10.3390/pr11020397

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop