Next Article in Journal
Experimental and Numerical Impact Analysis of Automotive Bumper Brackets Made of 2D Triaxially Braided CFRP Composites
Next Article in Special Issue
Combined Effect of Melittin and DNase on Enterococcus faecalis Biofilms and Its Susceptibility to Sodium Hypochlorite
Previous Article in Journal
Decision Support System in the Field of Defects Assessment in the Metal Matrix Composites Castings
Previous Article in Special Issue
Fracture Load of CAD/CAM Feldspathic Crowns Influenced by Abutment Material
Article

Characteristics of 10-Methacryloyloxidecyl Dihydrogen Phosphate Monomer in Self-Etching Two-Bottled Dental Adhesive System: Comparison with Commercial Products

1
Research Planning and Coordination Division, National Forensic Service, Wonju-si 26460, Korea
2
Nature Inspired Materials Processing Research Center, Department of Energy Science, Sungkyunkwan University, Suwon-si 16419, Korea
*
Author to whom correspondence should be addressed.
Materials 2020, 13(16), 3553; https://doi.org/10.3390/ma13163553
Received: 24 July 2020 / Revised: 10 August 2020 / Accepted: 10 August 2020 / Published: 12 August 2020
Dentin bonding is a key in restorative dentistry. Here, we developed a self-etching two-bottle adhesive system containing 10-methacryloyloxidecyl dihydrogen phosphate monomer (MDP) and the physical, mechanical, and biocompatible properties were evaluated. The characteristics of MDP were analyzed using nuclear magnetic resonance (NMR). Tests for water sorption and solubility, the shear-bond strengths to dentin and enamel, and cytotoxicity were performed. The newly-blended experimental group showed the lowest thickness and water sorption and solubility values. The shear bond strength of enamel and dentin were comparable to control groups (the three other products were ClearfilTM, UniFil®, and AdheSE®). All test groups showed 60% of cell viability. In this study, the properties of the newly-synthesized adhesive are comparable with the others. The fundamental goal of this study is to get the MDP patent released, as it is intended for domestic production. For this purpose, this dentin adhesive was developed and compared with the commercial product. View Full-Text
Keywords: self-etching two bottled dental adhesive; 10-methacryloyloxidecyl dihydrogen phosphate monomer; biocompatibility; shear bond strength self-etching two bottled dental adhesive; 10-methacryloyloxidecyl dihydrogen phosphate monomer; biocompatibility; shear bond strength
Show Figures

Figure 1

MDPI and ACS Style

Roh, J.; Shin, H.; Hong, M.-H. Characteristics of 10-Methacryloyloxidecyl Dihydrogen Phosphate Monomer in Self-Etching Two-Bottled Dental Adhesive System: Comparison with Commercial Products. Materials 2020, 13, 3553. https://doi.org/10.3390/ma13163553

AMA Style

Roh J, Shin H, Hong M-H. Characteristics of 10-Methacryloyloxidecyl Dihydrogen Phosphate Monomer in Self-Etching Two-Bottled Dental Adhesive System: Comparison with Commercial Products. Materials. 2020; 13(16):3553. https://doi.org/10.3390/ma13163553

Chicago/Turabian Style

Roh, Jiyeon; Shin, Hyunjung; Hong, Min-Ho. 2020. "Characteristics of 10-Methacryloyloxidecyl Dihydrogen Phosphate Monomer in Self-Etching Two-Bottled Dental Adhesive System: Comparison with Commercial Products" Materials 13, no. 16: 3553. https://doi.org/10.3390/ma13163553

Find Other Styles
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Search more from Scilit
 
Search
Back to TopTop