Next Article in Journal
Critical Assessment of Hydrogen and Methane Production from 1G and 2G Sugarcane Processing Wastes Using One-Stage and Two-Stage Anaerobic Digestion
Previous Article in Journal
Viable Recycling of Polystyrene via Hydrothermal Liquefaction and Pyrolysis
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Model of a Hybrid Electric Vehicle Equipped with Solid Oxide Fuel Cells Powered by Biomethane

1
Department of Mechanical and Industrial Engineering, University of Brescia, I-25123 Brescia, Italy
2
Department of Information Engineering, University of Brescia, I-25123 Brescia, Italy
*
Author to whom correspondence should be addressed.
Energies 2023, 16(13), 4918; https://doi.org/10.3390/en16134918
Submission received: 5 June 2023 / Revised: 19 June 2023 / Accepted: 20 June 2023 / Published: 24 June 2023
(This article belongs to the Section E: Electric Vehicles)

Abstract

To promote the development of new technologies that allow an intensive use of renewable green energies and to overcome the problem of the lack of range of full electric vehicles, an interesting energy source is biomethane. The Fuel Cells (FCs) systems benefit from high efficiency and zero emissions, and they are generally powered by hydrogen. One of the main problems related to hydrogen FCs is the current weak network of infrastructure’s need to supply the hydrogen itself. An alternative may be the development of FC vehicles powered by methane, or biomethane, to exploit a renewable energy source. The type of Fuel Cells that lends itself to a methane (or biomethane) power supply is the Solid Oxide Fuel Cell (SOFC). Considering the limitations of the SOFCs, a vehicle model powered by Fuel Cells fueled by methane (or biomethane) is created. This work concerns the creation of a vehicle model, and the sizing of the SOFC system (generator delivering a constant 3 kW) and battery pack (30 Ah), for a door-to-door waste collection vehicle, whose mission is known. The latter is a fundamental requirement due to the limitations found for Solid Oxide Fuel Cells: slow transient and long ignition times.
Keywords: mathematical modeling; energy consumption; alternative propulsion; Solid Oxide Fuel Cell (SOFC); Fuel Cells powered by methane; vehicle model mathematical modeling; energy consumption; alternative propulsion; Solid Oxide Fuel Cell (SOFC); Fuel Cells powered by methane; vehicle model

Share and Cite

MDPI and ACS Style

Sandrini, G.; Gadola, M.; Chindamo, D.; Zecchi, L. Model of a Hybrid Electric Vehicle Equipped with Solid Oxide Fuel Cells Powered by Biomethane. Energies 2023, 16, 4918. https://doi.org/10.3390/en16134918

AMA Style

Sandrini G, Gadola M, Chindamo D, Zecchi L. Model of a Hybrid Electric Vehicle Equipped with Solid Oxide Fuel Cells Powered by Biomethane. Energies. 2023; 16(13):4918. https://doi.org/10.3390/en16134918

Chicago/Turabian Style

Sandrini, Giulia, Marco Gadola, Daniel Chindamo, and Laura Zecchi. 2023. "Model of a Hybrid Electric Vehicle Equipped with Solid Oxide Fuel Cells Powered by Biomethane" Energies 16, no. 13: 4918. https://doi.org/10.3390/en16134918

APA Style

Sandrini, G., Gadola, M., Chindamo, D., & Zecchi, L. (2023). Model of a Hybrid Electric Vehicle Equipped with Solid Oxide Fuel Cells Powered by Biomethane. Energies, 16(13), 4918. https://doi.org/10.3390/en16134918

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop