Search Results (719)

Micronutrients play a prominent role in plant growth and development, and their bioavailability is a growing global concern. Zinc is one of the most important micronutrients in the plant life cycle, acting as a metallic cofactor for numerous biochemical reactions within plant cells. Zinc deficiency in plants leads to various physiological abnormalities, ultimately affecting nutritional quality and posing challenges to food security. Biofortification methods have been adopted by agronomists to increase Zn concentrations in crops through optimal foliar and soil applications. Changing climatic conditions and conventional agricultural practices alter edaphic factors, reducing zinc bioavailability in soils due to abrupt weather changes. Precision agriculture emphasizes need-based and site-specific technologies to address these nutritional deficiencies. Nanoscience, a multidimensional approach, reduces particle size to the nanometer (nm) scale to enhance their efficiency in precise amounts. Nanoscale forms of Zn⁺² and their broad applications across crops are gaining attention in agriculture under varied application methods. This review focuses on the significance of Zn oxide (ZnO) nanoparticles (ZnONPs) and their extensive application in crop production. We also discuss optimum dosage levels, ZnONPs synthesis, application methods, toxicity, and promising future strategies in this field. Full article

Among the new strategies for managing diseases in agricultural crops is the application of metallic nanoparticles due to their ability to inhibit the development of phytopathogenic microorganisms and to induce plant defense responses. Therefore, this research evaluated the effects of silver (AgNPs), zinc oxide (ZnONPs), and silicon dioxide (SiO₂NPs) nanoparticles on symptom progression and physiological parameters in two pathosystems: Pseudomonas syringae pv. tomato (Psto) in tomato (pathosystem one, culturable pathogen) and Candidatus Liberibacter solanacearum (CaLso) in pepper plants (pathosystem two, non-culturable pathogen). For in vitro pathosystem one assays, SiO₂NPs did not inhibit Psto growth. The minimum inhibitory concentration (MIC) was 31.67 ppm for AgNPs and 194.3 ppm for ZnONPs. Furthermore, the minimum lethal concentration (MLC) for AgNPs was 100 ppm, while for ZnONPs, it was 1000 ppm. For in planta assays, ZnONPs, AgNPs, and SiO₂NPs reduced the number of lesions per leaf, but only ZnONPs significantly decreased the severity. Regarding pathosystem two, AgNPs, ZnONPs, and SiO₂NPs application delayed symptom progression. However, only AgNPs significantly reduced severity percentage. Moreover, treatments with AgNPs and SiO₂NPs increased the plant height and dry weight compared to the results for the control. Full article

Nanofertilizers (NFs) and engineered nanoparticles (NPs) are increasingly used in agriculture, yet their environmental safety remains poorly understood. This study evaluated the comparative phytotoxicity of zinc oxide (ZnO), titanium dioxide (TiO₂), and clinoptilolite nanoparticles, three commercial nanofertilizers, and potassium dichromate (K₂Cr₂O₇) using Lactuca sativa seeds under adapted OECD-208 protocol conditions. Seeds were exposed to varying concentrations of each xenobiotic material (0.5–3% for NFs; 10–50% for NPs), with systematic assessment of seedling survival, root and hypocotyl length, dry biomass, germination index (GI), and median effective concentration (EC₅₀) values. Nanofertilizers demonstrated significantly greater phytotoxicity than engineered nanoparticles despite lower application concentrations. The toxicity ranking was established as NF1 > NF3 > NF2 > NM2 > NM1 > NM3, with NF1 being most toxic (EC₅₀ = 1.2%). Nanofertilizers caused 45–78% reductions in root length and 30–65% decreases in dry biomass compared with controls. GI values dropped to ≤70% in NF1 and NF3 treatments, indicating concentration-dependent growth inhibition. While nanofertilizers offer agricultural benefits, their elevated phytotoxicity compared with conventional nanoparticles necessitates rigorous pre-application safety assessment. These findings emphasize the critical need for standardized evaluation protocols incorporating both physiological and ecotoxicological endpoints to ensure safe xenobiotic nanomaterial deployment in agricultural systems. Full article

In this study, polymer matrix composites based on high-density polyethylene (HDPE) and recycled HDPE (HDPEr) were reinforced with zinc oxide nanoparticles (ZnO NPs). Four formulations (M1-M4) with HDPE/HDPEr/ZnO NP mass ratios of 50/50/0, 48/47/5, 45/45/10, and 43/42/15 were produced via melt injection molding. Disc-shaped samples (Ø30 ± 0.1 mm × 2 ± 0.1 mm) were evaluated in unaged and aged states (840 h at 100% humidity and 100 °C) using scanning electron microscopy, X-ray diffraction, ultraviolet–visible and Fourier-transform infrared spectroscopy, water absorption, thermal resistance, and mechanical and dielectric testing. Among all composites, M2 showed the best performance, with the highest aging resistance (estimated lifetime of 3891 h in humidity and 2361 h in heat). It also exhibited superior mechanical properties, with the highest indentation hardness, Vickers hardness, and elastic modulus before (0.042 GPa, 3.846 HV, and 0.732 GPa) and after aging under humidity (0.042 GPa, 3.932 HV, 0.706 GPa) and elevated temperature (0.085 GPa, 7.818 HV, 1.871 GPa). Although ZnO NPs slightly reduced electrical resistivity, M2 showed the most stable dielectric properties. In its unaged state, M2 had 22%, 30%, and 3% lower surface resistivity, volume resistivity, and dielectric strength, respectively, than M1 polymer. M2 was identified as the optimal formulation, combining mechanical strength, dielectric stability, and resistance to moisture and heat. Full article

This work explores zinc oxide nanoparticle (ZnO NP) synthesis utilizing leaf extract of the Gaultheria fragrantissima plant that are useful in medicine, environmental remediation, and cosmetics due to their antibacterial activity, photocatalytic efficiency, and UV-blocking characteristics. Traditional synthesis methods involve energy-intensive procedures and hazardous chemicals, posing environmental and human health risks. To overcome these limitations, this research focuses on utilizing G. fragrantissima, rich in bioactive compounds such as phenolics and flavonoids, with the methyl salicylate previously reported in the literature for this species, which helps reduce and stabilize NPs. ZnO NPs were characterized through X-ray diffraction (XRD), UV–visible spectroscopy, Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), and energy-dispersive spectroscopy (EDS). The ZnO NPs were found to have a well-defined crystalline structure, with their average crystallite size measured at around 8.26 nm. ZnO NPs exhibited moderate antimicrobial activity against selected microbial strains. These findings underscore the potential of G. fragrantissima-mediated synthesis as an environmentally sustainable and efficient method for producing ZnO NPs with multifunctional applications. This study provides a greener alternative to conventional synthesis approaches, demonstrating a method that is both eco-friendly and capable of yielding NPss with desirable properties. Full article

The green synthesis of zinc oxide nanoparticles (ZnO NPs) using Artemisia absinthium L. extract has gained considerable attention due to its eco-friendly approach and potential applications in food science. This study investigates the synthesis and characterization of Artemisia-mediated ZnO NPs, focusing on their physicochemical properties. The nanoparticles were characterized using ultraviolet–visible spectroscopy (UV–Vis), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), and energy dispersive X-ray spectroscopy (EDX). Successful synthesis was achieved through a co-precipitation method, resulting in an average particle size of 36.6 nm. The presence of polyphenols and flavonoids in A. absinthium L. extract acted as both a reducing agent and stabilizer for the nanoparticles. The physicochemical characterization revealed strong absorption peaks indicative of ZnO, confirming successful nanoparticle formation. In addition to the structural findings, this study presents novel insights by demonstrating that Artemisia-mediated ZnO NPs possess significantly enhanced antimicrobial activity compared to both pure ZnO NPs and the plant extract alone. The biosynthesized nanoparticles exhibited notably lower minimum inhibitory concentration (MIC) and minimum bactericidal/fungicidal concentration (MBC/MFC) values against Staphylococcus aureus, Escherichia coli, and Candida albicans, suggesting a strong synergistic effect between ZnO and the phytochemicals of A. absinthium L. Thus, the study confirms and quantifies the superior antibacterial potential of Artemisia-derived ZnO NPs, offering promising implications for food, biomedical and pharmaceutical applications. Full article

Fusarium wilt (FW), induced by Fusarium oxysporum, poses a significant threat to global tomato (Solanum lycopersicum L.) production, leading to substantial yield reduction. This study investigated the anatomical and ultrastructural responses of tomato leaves to FW infection and assessed the efficacy of salicylic acid (SA), humic acid (HA), and zinc oxide nanoparticles (ZnO-NPs) as control and inducer agents. FW infection resulted in notable structural alterations, including decreased leaf blade and mesophyll thickness and increased Adaxial epidermal cell wall thickness, thereby disrupting the leaf structure. Also, it caused severe chloroplast damage, such as membrane detachment and a reduced count of starch granules, which could impair photosynthetic efficiency. The different treatments exhibited significant effectiveness in reversing these adverse effects, leading to increased thickness of the leaf blade, mesophyll, palisade, and spongy tissues and enhanced structural integrity. Furthermore, ultrastructural improvements included activated mitochondria, compact chloroplasts with increased numbers, and proliferation of plastoglobuli, indicating adaptive metabolic changes. Principal component analysis (PCA-biplot) highlighted the significant parameters distinguishing treatment groups, providing insights into trait-based differentiation. This study concluded the potential of SA, HA, and ZnO-NPs as sustainable solutions for managing Fusarium wilt and enhancing tomato plant resilience, thereby contributing to improved agricultural practices and food security. Full article

Zinc oxide nanoparticles (ZnO NPs) have attracted significant attention due to their wide-ranging applications in animal production, largely because of their notable biocompatibility, low toxicity, and strong antimicrobial activity. These properties make ZnO NPs a promising substitute for traditional antibiotics. Their application could address the growing concern of antibiotic resistance in livestock industries. This review examines the unique physicochemical characteristics of ZnO NPs, including their nanoscale size and high surface area, which contribute to their biological functionality. Emphasis is placed on green synthesis methods that minimize environmental impact while producing high-quality ZnO NPs. In animal farming, ZnO NPs play a crucial role not only in promoting growth and improving immune responses, but also in enhancing meat and egg quality. Additionally, this review discusses the environmental and safety implications of ZnO NPs, considering their sustainable application potential in future animal production practices, aimed at fostering a more eco-friendly and efficient livestock sector. Full article

Bacterial leaf blight (BLB), caused by Xanthomonas oryzae pv. oryzae (Xoo), poses a serious threat to rice cultivation. This study presents the green synthesis of zinc oxide nanoparticles (ZnO NPs) using an aqueous leaf extract of the medicinal plant Centella asiatica (L.) Urban and evaluates their potential as dual-function nanopesticides. The synthesized CA-ZnO NPs exhibited high crystallinity, a hexagonal to quasi-spherical morphology, and nanoscale dimensions (~22.5 nm), as confirmed by UV–Vis spectroscopy, XRD, FTIR, SEM, TEM, and SAED analyses. These nanoparticles demonstrated potent antibacterial activity against a highly virulent, field-derived Thai Xoo strain, with a minimum inhibitory concentration (MIC) of 8 µg/mL. Mechanistic investigations revealed substantial membrane disruption, intracellular nanoparticle penetration, and elevated reactive oxygen species (ROS) generation in treated cells. Cytotoxicity testing using human dermal fibroblasts (HDFs) revealed excellent biocompatibility, with no statistically significant reduction in cell viability at concentrations up to 500 µg/mL. In contrast, viability markedly declined at 1000 µg/mL. These findings underscore the selective antibacterial efficacy and minimal mammalian cytotoxicity of CA-ZnO NPs. Overall, CA-ZnO NPs offer a promising green nanopesticide platform that integrates potent antibacterial activity with biocompatibility, supporting future applications in sustainable crop protection and biomedical nanotechnology. Full article

This study developed cholesteric liquid crystal broadband reflective films using zinc oxide nanoparticles (ZnO NPs) and homotriazine UV-absorbing dye (UV-1577) to enhance infrared shielding. Unlike benzotriazole-based UV absorber UV-327, which suffers from volatility and contamination, UV-1577 exhibits superior compatibility with liquid crystals, higher UV absorption efficiency, and enhanced processing stability due to its larger molecular structure. By synergizing UV-1577 with ZnO NPs, we achieved a gradient UV intensity distribution across the film thickness, inducing a pitch gradient that broadened the reflection bandwidth to 915 nm and surpassing the performance of previous systems using UV-327/ZnO NPs (<900 nm). We conducted a detailed examination of the factors influencing the reflective bandwidth. These included the UV-1577/ZnO NP ratio, the concentrations of the polymerizable monomer (RM257) and chiral dopant (R5011), along with polymerization temperature, UV irradiation intensity, and irradiation time. The resultant films demonstrated efficient ultraviolet shielding via the UV-1577/ZnO NPs collaboration and infrared shielding through the induced pitch gradient. This work presents a scalable strategy for energy-saving smart windows. Full article

The use of zinc oxide nanoparticles (ZnO-NPs) is a promising strategy to enhance zinc availability and promote plant growth due to their physicochemical properties and biocompatibility. This study evaluated the effects of ZnO-NP morphology (spherical and hexagonal), maltodextrin (MD) surface coating, and a concentration range of 0–2000 mg L⁻¹ on growth and gas exchange in bell pepper seedlings. ZnO-NPs increased seedling height, especially at 750 and 1000 mg L⁻¹ for MD-coated spherical NPs and at 250 and 500 mg L⁻¹ for MD-coated hexagonal NPs. Spherical NPs also enhanced stem diameter, root length, and the dry weight of roots and stems. Leaf dry weight was highest with MD-coated spherical NPs, while hexagonal forms had milder effects. Dose–response analysis revealed that, with the exception of hexagonal MD-coated NPs, the total dry weight of seedlings stabilized at concentrations ranging 219.6 to 313.6 mg L⁻¹. Gas exchange parameters were significantly influenced by the evaluated factors. Uncoated hexagonal NPs at 1500 mg L⁻¹ increased the photosynthetic rate by 239%. MD coating improved performance, particularly in spherical NPs at 750 and 1000 mg L⁻¹. The transpiration rate rose with MD-coated hexagonal NPs at 500–2000 mg L⁻¹, and SPAD units increased with both morphologies. Overall, this study confirms that ZnO-NP morphology and surface coating play key roles in enhancing growth and physiological responses in bell pepper seedlings. Full article

The surface modification of zinc oxide nanoparticles (ZnONPs) with organic compounds has been shown to improve their dispersibility. In this study, to develop a highly functional material, ZnONP modified with 6-amino-1-hexanol bearing both amino and hydroxyl functional groups was synthesized. Scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM-EDS) and X-ray photoelectron spectroscopy (XPS) analyses confirmed that functionalized ZnONP was successfully obtained by a hydrothermal synthetic method. The mechanical properties of composite films of polylactic acid (PLA) reinforced with the functionalized ZnONP were then evaluated. The composite containing functionalized ZnONP exhibited a higher maximum stress than that containing unmodified ZnONP. These ZnONP/polymer composites therefore show promise as novel high-performance materials. Full article

Zinc oxide nanoparticles (ZnONPs) are increasingly used in agriculture to stimulate plant growth and development, including under in vitro culture conditions. However, there is limited data on the effects of ZnONPs on the micropropagation of Scutellaria baicalensis Georgi. The pharmacological properties of this species make it a valuable medicinal plant. In Poland, it does not occur naturally but is cultivated for the production of herbal material. In vitro micropropagation is an effective method for obtaining genetically uniform plantlets. The aim of this study was to evaluate the effects of various concentrations of ZnONPs on growth parameters and the content of mineral nutrients, phenolic compounds, antioxidants, and photosynthetic pigments in Scutellaria baicalensis cultured in vitro. Shoot tip explants were cultured on MS medium supplemented with 1.0 mg dm⁻³ BA and 0.1 mg dm⁻³ IBA, together with ZnONPs at concentrations of 0 (control), 10, 20, 30, and 40 mg dm⁻³. The results showed that ZnONPs at concentrations of 10–20 mg dm⁻³ had no statistically significant effect on shoot or root development or on fresh weight gain. However, higher concentrations (30 and 40 mg dm⁻³) had a significantly negative impact on the number and length of shoots and roots, as well as on biomass accumulation. ZnONPs at 10–20 mg dm⁻³ significantly increased the content of potassium, calcium, magnesium, iron, and zinc in regenerated multi-shoot plantlets. A strong positive correlation (r = 0.951) was observed between ZnONP concentration and zinc accumulation in the plantlets. The levels of manganese and copper were not significantly different from the control. Plantlets treated with 30–40 mg dm⁻³ ZnONPs had significantly lower levels of calcium, iron, manganese, and copper. Those grown at 30 mg dm⁻³ had the highest potassium and magnesium levels, while plantlets exposed to 40 mg dm⁻³ had the highest zinc content. The total phenolic content and antioxidant activity (measured using ABTS and DPPH assays) were significantly higher in ZnONP-treated plantlets compared to the control. In contrast, the levels of chlorophyll a, chlorophyll b, total chlorophyll (a + b), and carotenoids were significantly lower in plants treated with ZnONPs. A strong negative correlation was found between ZnONP concentration and photosynthetic pigment content, while the ZnONP concentration was positively correlated with total phenolic content and antioxidant activity (ABTS⁺ and DPPH). Full article

Chemical nanosensors based on tin dioxide (SnO₂) and zinc oxide (ZnO) nanoparticles (NPs) were developed and characterized for the detection of low concentrations of atmospheric pollutants, such as nitrogen dioxide (NO₂) and carbon monoxide (CO). The sensing layers were prepared using three fabrication methods: drop-casting, electrospray, and spark ablation coupled with an inertial impaction printer, to compare their performance. Multiple surface characterization techniques were carried out to investigate the surface morphology and elemental composition of the deposited layers such as SEM (scanning electron microscopy) and XPS (X-ray photoelectron spectroscopy) analyses. UV light photoactivation enabled the sensors to detect ultra-low concentrations of the target gases at room temperature (100 ppb NO₂ and 1 ppm CO). The measurements were conducted at 50% relative humidity to simulate real environmental conditions. All sensors were capable of detecting the target gases. Drop-casting is the simplest and most cost-effective technique, but it is also the least reproducible. In contrast, sensors based on the spark ablation technique achieved more homogeneous sensing layers, with practically no nanoparticle agglomeration, resulting in devices with lower noise and drift in their electrical response. Full article

This paper presents a cost-effective and versatile pico-dispensing technique as an efficient and straightforward approach for depositing zinc oxide nanoparticle (ZnO—NP) thin films on micromechanical devices (MEMS). Due to its piezoelectric properties, bulk ZnO is commonly used as a material for micro-/nanocantilever actuation. The pico-dispensing process provides precise control over the deposition, allowing uniform and localized application of ZnO—NP on microcantilevers. Compared to traditional ZnO deposition techniques (e.g., sputtering or sol–gel), pico-dispensing of ZnO—NP offers advantages in simplicity, reduced material waste, and significantly lower costs. Furthermore, it is easy to tailor the composition and properties by incorporating nanoparticles of other materials. Experimental results demonstrate that ZnO—NP thin films deposited via pico-dispensing enable actuation with amplitudes of several nanometers and bandwidths up to 250 kHz, making them potentially suitable for actuation of micromechanical devices such as in dynamic AFM modes. Full article