Search Results (2,357)

Despite efforts to produce scalable, substrate-independent, low-defect-density, and high-quality MoS₂, this continues to be a critical challenge for industrial-scale applications. This work aims to present a chemical vapor deposition (CVD) method for growing high-quality and potentially large-area mono- to few-layer MoS₂ films via proximity between the Mo nanofilm substrate and the target substrates. By using stoichiometry-guided knowledge of Mo-S and Mo-O-S phase diagrams, Mo nanofilms are oxidized and then sulfurized under optimized conditions to grow high-quality, millimeter-scale mono- to few-layer MoS₂ films in proximity to the target substrate. We have achieved millimeter-scale continuous growth of MoS₂ revealed via optical microscopy. Two-dimensional Raman maps of Full Width at Half Maximum show high-quality growth, and photoluminescence-based B/A exciton amplitude ratio shows high crystalline and optical quality with low defect density. Full article

The Sakhalin pine sawyer, Monochamus saltuarius Gebler, 1830 (Coleoptera: Cerambycidae), is a newly discovered insect vector of the pine wood nematode (Bursaphelenchus xylophilus) in China. Despite its ecological importance, the detailed morphology of its sensory systems remains largely unexplored. This study presents comprehensive ultrastructural analysis of the compound eyes and stridulatory organs in adult M. saltuarius, with a focus on sexual differences. Our morphometric results revealed pronounced sexual dimorphism: males possessed significantly larger compound eyes in terms of total area and perimeter. Furthermore, all three types of ommatidial facets (hexagonal, pentagonal, and quadrilateral) exhibited significantly greater area, perimeter, and diameter in males. Interestingly, while the total number of ommatidia and the counts within the dorsal and ventral eye regions showed no significant sexual difference, they were strongly positively correlated with body length in both sexes. Regarding the stridulatory organs, key morphological features including the transverse diameter, longitudinal diameter, and width of the lateral sulcus of the stridulatory file were also significantly greater in males. In contrast, no sexual dimorphism was detected in the width or density of the stridulatory teeth. These findings collectively indicate a significant investment in sexually dimorphic sensory organs in M. saltuarius, which we hypothesize is closely linked to sex-specific behavioral roles, particularly in active mate searching, courtship displays, and intrasexual competition. This research provides a crucial morphological foundation for understanding the species’ visual and acoustic communication, supporting future work on its sensory ecology and the development of behavior-based control strategies for pine wilt disease. Full article

Pulsed electric fields (PEFs) are widely recognized as a non-thermal, selective physical therapy with wide clinical application in tumor ablation. The pulse width determines how electrical energy is distributed across plasma membrane to intracellular organelles. However, under an engineering-defined equal-dose condition (N·E²·tp), which serves as a practical control parameter rather than a measure of true cellular energy absorption, systematic and comparable experimental characterization of cellular and subcellular responses across pulse widths from the microsecond to nanosecond range remains limited. In this study, PEFs with pulse widths ranging from 100 μs to 50 ns were applied under equal-dose constraints, and cellular responses were evaluated using transmission electron microscopy (TEM), multi-organelle fluorescence imaging, and flow cytometry. The results indicate that pulse-width-dependent effects were observed under a fixed pulse-number, dose-equalized framework in which electric field strength varied across conditions. Structural and functional changes were observed in multiple organelles, including the nucleus, mitochondria, endoplasmic reticulum, and Golgi apparatus. Notably, nanosecond pulses were more effective in inducing mitochondrial membrane potential loss and increasing the proportion of apoptotic or non-viable cells. These findings demonstrate that, under equal-dose conditions, pulse width is a key temporal parameter governing PEF-induced biological effects, indicating that identical dose constraints do not necessarily result in equivalent biological responses. This work provides experimental foundation for parameter selection and optimization in PEF-based biomedical applications. Full article

A major danger that significantly raises the possibility of deep coal mining accidents is the delayed water influx from the bottom plate, which is brought on by the activation of tiny faults brought on by mining at the working face of the restricted aquifer. This study develops 17 numerical models utilizing FLAC3D simulation software 6.00.69 to clarify the activation and water inburst mechanisms of minor faults influenced by various parameters, incorporating fluid–solid coupling effects in coal seam mining. The developmental patterns of the stress field, displacement field, plastic zone, and seepage field of the floor rock layer were systematically examined in relation to four primary factors: aquifer water pressure, minor fault angle, fracture zone width, and the distance from the coal seam to the aquifer. The results of the study show that the upper and lower plates of the minor fault experience discontinuous deformation as a result of mining operations. The continuity of the rock layers below is broken by the higher plate’s deformation, which is significantly larger than that of the lower plate. The activation and water flow into small faults are influenced by many elements in diverse ways. Increasing the distance between the coal seam and the aquifer will make the water conduction pathway more resilient. This will reduce the amount of water that flows in. On the other hand, higher aquifer water pressure, a larger fracture zone, and a fault that is tilted will all help smaller faults become active and create channels for water to flow into. The gray relational analysis method was used to find out how sensitive something is. The sensitivities of each factor to water influence were ranked from high to low as follows: distance between the aquifer and coal seam (correlation coefficient 0.766), aquifer water pressure (0.756), width of the fracture zone (0.710), and angle of the minor fault (0.673). This study statistically elucidates the inherent mechanism of delayed water instillation in minor faults influenced by many circumstances, offering a theoretical foundation for the accurate prediction and targeted mitigation of mine water hazards. Full article

In this work we report the results of analysis of the acoustic signal generated by the interaction of a nanosecond laser pulse (30 mJ, 1064 nm) with various residues placed on a silica wafer. The signal was captured by a unidirectional microphone placed 30 mm from the laser-generated plasma. The examined sample classes, other than the clean wafer, included particles from soils and rocks, carbonates, nitro precursors, ash, coal, smeared diesel, and particles of explosives. We tested three types of explosives, namely PETN, RDX, and HMX, having different origins. For the explosives, the acoustic signal showed a faster rise, larger amplitude, different width, and attenuation compared with the other sample classes. By subtracting the acoustic signal from the wafer at the same position, obtained after four cleaning laser pulses, the contribution of echoes was eliminated and true differences between the residue and substrate became evident. Through four different features in the subtracted signal, it was possible to classify explosives without the presence of false positives; the estimated limit of detection was 15 ng, 9.6 ng, and 18 ng for PETN, RDX, and HMX, respectively, where the mass was extrapolated from nano-printed samples and LIBS spectra acquired simultaneously. Furthermore, HMX was distinguished from the other two explosives in 90% of the cases; diesel and coal were also recognized. We also found that explosives deposited through wet transfer behaved as inert substances for the tested masses up to 30 ng. Full article

Adhesive fracture in layered structures is governed by subsurface crack evolution that cannot be accessed using surface-based diagnostics. Methods such as digital image correlation and optical spectroscopy measure surface deformation but implicitly assume a straight and uniform crack front, an assumption that becomes invalid for interfacial fracture with wide crack openings and asymmetric propagation. In this work, terahertz time-domain spectroscopy (THz-TDS) is combined with double-cantilever beam testing to directly map subsurface crack-front geometry in opaque adhesive joints. A strontium titanate-doped epoxy is used to enhance dielectric contrast. Multilayer refractive index extraction, pulse deconvolution, and diffusion-based image enhancement are employed to separate overlapping terahertz echoes and reconstruct two-dimensional delay maps of interfacial separation. The measured crack geometry is coupled with load–displacement data and augmented beam theory to compute spatially averaged stresses and energy release rates. The measurements resolve crack openings down to approximately 100 μm and reveal pronounced width-wise non-uniform crack advance and crack-front curvature during stable growth. These observations demonstrate that surface-based crack-length measurements can either underpredict or overpredict fracture toughness depending on the measurement location. Fracture toughness values derived from width-averaged subsurface crack fronts agree with J-integral estimates obtained from surface digital image correlation. Signal-to-noise limitations near the crack tip define the primary resolution limit. The results establish THz-TDS as a quantitative tool for subsurface fracture mechanics and provide a framework for physically representative toughness measurements in layered and bonded structures. Full article

With the deepening of oil and gas exploration and development into ultra-deep and ultra-high pressure environments, the pressure of wellhead equipment is becoming higher and higher. The sealing performance of the casing head hanger is directly related to the safety and reliability of the whole wellhead equipment. Firstly, based on the numerical simulation method, the sealing performance of three different metal seal rings—H-type, X-type, and U-type—under 175 MPa working conditions is compared and analyzed. The simulation results show that the sealing performance of the H-type metal sealing ring is better than that of the X-type and U-type. The parametric analysis method is further used to study the influence of the structural parameters of the convex radius and the bottom angle of the H-ring on its sealing performance. The results show that when the convex radius is designed to be 3 mm, and the bottom angle is 90°, the effective contact width reaches 5.91 mm, and the contact uniformity is the best. Finally, based on the H-type metal sealing ring sample trial-produced with optimized parameters, a 175 MPa nitrogen medium sealing pressure test was completed on an 8 1/8” all-metal sealed mandrel casing hanger. The test results show that the system pressure drop is 0.7 MPa during the 5-min pressure stabilization process, which has good sealing reliability. Full article

In this paper, a series of Co-free FeCr_0.6Ni_0.6(AlSi)_x (x = 0, 0.1, 0.12, 0.14, 0.16) high-entropy alloys (HEAs) were designed and fabricated by suction casting, and the effects of equi-molar (Al, Si) co-addition in these Fe-rich Fe-Cr-Ni-based HEAs on microstructure, mechanical properties, and corrosion resistance were systematically investigated. It is found that equi-molar (Al, Si) co-addition could cause the phase formation from FCC to FCC + BCC, while the morphologies of the phases change from dendrite-type to sideplate-type. Moreover, trade-off between strength and plasticity occurs with the increase in (Al, Si) co-addition, and the production of ultimate tensile strength and plasticity reaches the highest value when x = 0.12, while there exists a narrow region for x values to realize excellent comprehensive mechanical properties. In addition, similar corrosion resistance in 3.5 wt.% NaCl solution higher than 316L stainless steel could be realized in the HEAs with x = 0.12 and 0.14, while the latter one is slightly lower in pitting corrosion and the width of passive region, which is possibly caused by the increase in the density of phase boundaries. This work provides a novel insight on designing high-performance cost-effective Fe-rich and (Al, Si)-containing (Fe-Cr-Ni)-based HEAs combining high mechanical properties and corrosion resistance. Full article

The tokamak is a toroidal device that utilizes magnetic confinement to achieve controlled nuclear fusion. One of the major technical challenges hindering the development of this technology lies in effectively dissipating the generated heat. In this study, the inner blanket structure of a tokamak is selected as the research object, and a multi–physics numerical model coupling magnetic field, temperature field, and flow field is established. The effects of background magnetic field strength, blanket channel width, and inlet velocity of the liquid metal coolant on the thermal–flow characteristics of the blanket were systematically investigated. The results indicate that compared with the L-shaped channel, the U-shaped channel reduces flow resistance in the turning region by 6%, exhibits a more uniform temperature distribution, and decreases the outlet–inlet temperature difference by 4%, thereby significantly enhancing the heat transfer efficiency. An increase in background magnetic field strength suppresses coolant flow but has only a limited impact on the temperature field. When the background magnetic field reaches a certain strength, the magnetic field has a certain hindering effect on the flow of the working fluid. Increasing the thickness of the blankets appropriately can alleviate the hindering effect of the magnetic field on the flow and improve the velocity distribution in the outlet area. Full article

Newborns are unable to reliably express changes in their physical condition due to their physiological immaturity and limited capacity for communication; therefore, continuous and systematic monitoring during phototherapy is essential to ensure timely detection of adverse responses and maintenance of therapeutic safety. This study extends our prior work, which introduced an indirect method for measuring light intensity to improve precision in monitoring newborn skin illumination. Light-emitting diode (LED) phototherapy has attracted considerable attention as an effective treatment for neonatal jaundice (NNJ). This study introduces an three-dimensional configuration of blue LEDs. An Arduino Mega 2560 microcontroller with pulse-width modulation (PWM) technology was employed to independently regulate the intensity of LED strips, enabling precise control of light output. The strips were mounted on an arc-shaped structure that can be adjusted mechanically and electronically through pre-programmed instructions embedded in the microcontroller. The results demonstrate that blue light at a wavelength of 460 ± 10 nm aligns with the peak absorption spectrum of bilirubin, thereby optimizing the efficacy of phototherapy for NNJ. Both observed absorption peaks were within the therapeutically effective range. Computer simulations confirmed that stable output contours can be achieved using rapid electronic scanning with a PID control algorithm to dynamically adjust the duty cycle. Experimental data showed that LED radiation output was largely linear. This supports the use of linear control algorithms and confirms the platform’s feasibility for future research. Full article

In this work, a substrate-integrated waveguide (SIW) filtering power divider with a modified complementary split-ring resonator (CSRR) is reported. Firstly, by integrating the meander-shaped slots with the conventional CSRR, the proposed inner-meander-slot CSRR (IMSCSRR) can enlarge the total length of the defected slot and increase the width of the split, thus enhancing the equivalent capacitance and inductance. In this way, the fundamental resonant frequency of the IMSCSRR can be effectively decreased without enlarging the circuit size, which can generally help to reduce the physical size by over 35%. Subsequently, to further reduce the circuit size, two IMSCSRRs are separately loaded on the top and bottom metal covers to constitute a broadside-coupled IMSCSRR, which is combined with the SIW. To verify the efficacy of the proposed SIW-IMSCSRR unit cell, a two-way filtering power divider is implemented. It combines the band-selection function of a filter and the power-distribution property of a power divider, thereby enhancing system integration and realizing size compactness. Experimental results show that the proposed filtering power divider achieves a center frequency of 3.53 GHz, a bandwidth of about 320 MHz, an in-band insertion loss of (3 + 1.3) dB, an in-band isolation of over 21 dB, and a size reduction of about 30% compared with the design without broadside-coupling, as well as good magnitude and phase variations. All the results indicate that the proposed filtering power divider achieves a good balance between low loss, high isolation, and compact size, which is suitable for system integration applications in microwave scenarios. Full article

This work investigates the effectiveness of block transform coding (BTC) as a lightweight, training-free quantization strategy for compressing the weights of pretrained deep neural networks. The proposed method applies a rule-based block transform with variance and root mean square error (RMSE)-driven stopping criteria, enabling substantial reductions in bit precision while preserving the statistical structure of convolutional and fully connected layer weights. Unlike uniform 8-bit quantization, BTC dynamically adjusts bit usage across layers and achieves significantly lower distortion for the same compression budget. We evaluate BTC across many pretrained architectures and tabular benchmarks. Experimental results show that BTC consistently reduces storage to 4–7.7 bits per weight while maintaining accuracy within 2–3% of the 32-bit floating point (FP32) baseline. To further assess scalability and baseline strength, BTC is additionally evaluated on large-scale ImageNet models and compared against a calibrated percentile-based uniform post-training quantization method. The results show that BTC achieves a substantially lower effective bit-width while incurring only a modest accuracy reduction relative to calibration-aware 8-bit quantization, highlighting a favorable compression–accuracy trade-off. BTC also exhibits stable behavior across successive post-training quantization (PTQ) configurations, low quantization noise, and smooth RMSE trends, outperforming naïve uniform quantization under aggressive compression. These findings confirm that BTC provides a scalable, architecture-agnostic, and training-free quantization mechanism suitable for deployment in memory- and computing-constrained environments. Full article

Based on linear wave theory and potential flow theory, the wave scattering performance of a rectangular floating porous box with an impermeable bottom is investigated analytically. The mathematical formulation of the physical problem is well established and solved, and its analytical solutions are appropriately obtained using the matched eigenfunction expansion method. The convergency and accuracy of the analytical solutions are carefully verified and thoroughly validated. It is found that the present analytical solutions converge up to three decimal places and agree well with the numerical results published in the previous literature. Furthermore, important numerical results are calculated to thoroughly analyze the oblique wave scattering performance of the proposed rectangular floating porous box with an impermeable bottom and its efficiency in preventing incident waves when used as a floating breakwater. It is concluded that the dimensionless width ($L/h$), submergence depth ($d/h$), and frictional coefficient ($f$) have a significant influence on the scattering performance and the transmission coefficient of the proposed porous box. This work is beneficial for the design and future development of floating rectangular porous box breakwaters. Full article

This study investigates the wear characteristics and optimization of a centrifugal pump (Q = 25 m³/h, H = 50 m, n = 2900 r/min) applied in sediment-laden waters of Southern Xinjiang irrigation systems. A numerical framework integrating the Realizable $k-\epsilon$ turbulence model, Discrete Phase Model (DPM), and Oka erosion model was established to analyze wear patterns under varying parameters (particle size, density, and mass flow rate). Results indicate that the average erosion rate peaks at 0.92 kg/s mass flow rate. Subsequently, a Response Surface Methodology (RSM)-based optimization was implemented: (1) Plackett–Burman (PB) screening identified the inlet placement angle (A), inlet diameter (C), and outlet width (E) as dominant factors; (2) Full factorial design (FFD) revealed significant interactions (e.g., A × C, C × E); (3) Box–Behnken Design (BBD) generated quadratic regression models for head, efficiency, shaft power, and wear rate (R² > 0.94). Optimization reduced the average erosion rate by 31.35% (from 1.550 × 10⁻⁴ to 1.064 × 10⁻⁴ kg·m⁻²·s⁻¹). Experimental validation confirmed the numerical model’s accuracy in predicting wear localization (e.g., impeller outlet). This work provides a robust methodology for enhancing the wear resistance of centrifugal pumps for agricultural irrigation in water with high fine sediment concentration environments. Full article

To address the scientific gap concerning optimal urban wind turbine morphology, this work presents an experimental performance comparison between two small-scale wind turbine designs: a conventional three-blade horizontal-axis wind turbine (HAWT) and a duct-equipped Ayanz-inspired screw-blade turbine. Both configurations were tested in a controlled wind tunnel under steady and transient wind conditions, including synthetic gusts designed to emulate urban wind patterns. The analysis focuses on power output, aerodynamic efficiency (via the power coefficient $C_P$), dynamic responsiveness, and integration suitability. A key novelty of this study lies in the full-scale experimental comparison between a non-conventional Ayanz screw-blade turbine and a standard three-blade turbine, since experimental data contrasting these two geometries under both steady and gusty urban wind conditions are extremely scarce in the literature. Results show that while the three-blade turbine achieves a higher $C_P$ peak and greater efficiency near its optimal operating point, the Ayanz turbine exhibits a broader performance plateau and better self-starting behavior under low and fluctuating wind conditions. The Ayanz model also demonstrated smoother power build-up and higher energy capture under specific gust scenarios, especially when wind speed offsets were low. Furthermore, a methodological contribution is made by comparing the $C_P$ vs. tip speed ratio λ curves at multiple wind speeds, providing a novel framework (plateau width analysis) for realistically assessing turbine adaptability and robustness to off-design conditions. These findings provide practical insights for selecting turbine types in variable or urban wind environments and contribute to the design of robust small wind energy systems for deployments in cities. Full article