Search Results (22)

Planar mirrors play a crucial role in autocollimation testing and optical beam relay systems of telescopes and other fields. However, for the next-generation large-aperture telescopes, typical monolithic planar mirrors fall short in meeting anticipated performance requirements, owing to their high costs and fabrication limitations. Here, a new integrated multimodal testing method for 3–4 m-class segmented planar mirrors is proposed. The presented system utilizes an innovative keystone architecture with a central mirror and keystone-shaped segments, which is superior to the traditional hexagonal architecture. To facilitate rapid coarse alignment, a machine vision system based on edge detection is investigated. Furthermore, the dispersed fringe technique is used for robust co-phasing. By using a segmented planar mirror designed with sub-aperture stitching strategy and combining local apertures, the system cost was reduced and high-precision measurement was achieved. Eventually, the alignment, co-focus and co-phasing measurements based on the proposed concept were completed, and the transfer characteristics were determined by analyzing the Optical Transfer Function (OTF). Test data shows co-phasing accuracy of better than 30 nm RMS (root-mean-square) and alignment accuracy less than 10 arcseconds. In addition, the system uses small-aperture mirrors in autocollimation testing to facilitate flexible alignment and testing of individual segments. The test optical path is configured to match the effective focal length of the system under test, and the optical lever effect of reflectors enhances the alignment sensitivity. The method combines autocollimation and wavefront sensing which allows the approach to provide high-precision control of co-focus, co-phasing, and surface errors correction. Full article

Liquid microlenses and their arrays (LMLAs) have emerged as a transformative platform in adaptive optics, offering superior reconfigurability, compactness, and fast response compared to conventional solid-state lenses. This review summarizes recent progress from an application-oriented perspective, focusing on actuation mechanisms, fabrication strategies, and functional performance. Among actuation mechanisms, electric-field-driven approaches are highlighted, including electrowetting for shape tuning and liquid crystal-based refractive-index tuning techniques. The former excels in tuning range and response speed, whereas the latter enables programmable wavefront control with lower optical aberrations but limited efficiency. Notably, double-emulsion configurations, with fast interfacial actuation and inherent structural stability, demonstrate great potential for highly integrated optical components. Fabrication methodologies—including semiconductor-derived processes, additive manufacturing, and dynamic molding—are evaluated, revealing trade-offs among scalability, structural complexity, and cost. Functionally, advances in focal length tuning, field-of-view expansion, depth-of-field extension, and aberration correction have been achieved, though strong coupling among these parameters still constrains system-level performance. Looking forward, innovations in functional materials, hybrid fabrication, and computational imaging are expected to mitigate these constraints. These developments will accelerate applications in microscopy, endoscopy, AR/VR displays, industrial inspection, and machine vision, while paving the way for intelligent photonic systems that integrate adaptive optics with machine learning for real-time control. Full article

To achieve higher enthalpy and pressure, the technique of variable cross-section drive is effectively combined with the heating of light gas to enhance the intensity of the incident shock wave. A study was conducted to predict the impact of variable cross-sections on the performance of high-temperature shock tube flow using a shock tube with a 2.6:1 diameter ratio between the driver and driven sections. The driver section was filled with a helium–argon gas mixture (mass ratio of 1:9), while the driven section contained dry air. Under total pressure conditions of 14.5 MPa and total temperature of 3404 K, as well as total pressure of 45 MPa and total temperature of 4845 K in the driver section, corresponding to driven section pressures of 10 kPa and 80 kPa, the results of chemical non-equilibrium numerical simulations were compared to experimental measurements of the incident shock Mach number and total pressure. The results indicated the following: First, after adding the contraction–expansion nozzle, the incident shock accelerated through the contraction section and reflected within the contraction section. Strong oscillations occurred during the flow, with increasing intensity as the throat size decreased. Second, without the nozzle, the shock velocity increased and then decreased. However, with the nozzle, the Mach number was highest near the nozzle exit and gradually decreased thereafter. Third, the presence of the nozzle led to the formation of a distinct fan-shaped wavefront, accompanied by significant variations in flow variables such as pressure, temperature, and Mach number in the region. This phenomenon was attributed to the interaction between the shock wave and the nozzle geometry, which altered the flow dynamics. Finally, as the throat size decreased, the intensity of the incident shock also decreased. After reflecting at the end of the shock tube, the total pressure in the driven section also decreased. The numerical simulations employed a multi-component, multi-temperature chemical non-equilibrium model, validated against experimental data, to accurately capture the complex flow behavior and wave interactions within the shock tube. Full article

The increasing demand for higher resolution and faster machinery in silicon wafer inspection is driven by the rise in electronic device production and the decreasing size of microchips. This paper presents the design and implementation of a device capable of accurately measuring the surface of silicon wafers using the stitching technique. We propose an optical system design for measuring the surface profile, specifically targeting the roughness and nanotopography of a silicon wafer. The device achieves a lateral resolution of 7.56 μm and an axial resolution of 1 nm. It can measure a full 300-mm wafer in approximately 60 min, acquiring around 400 million data points. The technique utilized is a wavefront phase sensor, which reconstructs the surface shape using two images displaced a certain distance from the conjugate plane in the image space of a 4f system. The study details the calibration process and provides a method for converting local measurement coordinates to global coordinates. Quantitative phase imaging was obtained by using the wave front intensity image algorithm. The conclusive results validate the method different metrics over a wafer with bonded dies. In addition, the device demonstrates the ability to distinguish different dies that are thinned along with die-to-wafer bonding onto a carrier wafer to obtain the difference in coplanarity between the die and its surroundings as well as to detect defects during the die-to-wafer bonding. Lastly, the residual stress in the thin film deposited over the die is obtained using the Stoney model. Full article

The refractive index of the lenses used in optical designs varies with wavelength, causing light rays to fail when focusing on a single plane. This phenomenon is known as chromatic aberration (CA), chromatic distortion, or color fringing, among other terms. Images affected by CA display colored halos and experience a loss of resolution. Fully achromatic systems can be achieved through complex and costly lens designs and/or computationally when digital sensors capture the image. In this work, we propose using the wavefront coding (WFC) technique with a trefoil-shaped phase modulation plate in the optical system to effectively increase the resolution of images affected by longitudinal chromatic aberration (LCA), significantly simplifying the optical design and reducing costs. Experimental results with three LEDs simulating RGB images verify that WFC with trefoil phase plates effectively corrects longitudinal chromatic aberration. Transverse chromatic aberration (TCA) is corrected computationally. Furthermore, we demonstrate that the optical system maintains depth of focus (DoF) for color images. Full article

Normal vision is a precious gift to mankind. Any vision defect or degradation is actually an intimidating problem for individuals and societies. Therefore, researchers are continually working to find effective solutions for vision disorders. In some retinal diseases such as Age-related Macular Degeneration (AMD), visual aids are required to improve vision ability and/or stop the progress of the disease. Recently, augmented vision techniques have been used to provide aid to people suffering from retinal impairment. However, in such techniques, the images of real scenes are electronically deformed to compensate for vision impairment. Therefore, the natural scene is displayed as an electronic image on glasses. Intuitively, it is annoying to the patient to see electronic rather than natural scenes. Moreover, these visual aids are bulky and produce electric fields that might be harmful with continuous use. In this work, a novel optical solution to provide a visual aid to patients with central vision loss has been proposed. The proposed optical solution deforms the wavefront of the scene to entirely fall on the healthy parts of the retina. This, in turn, conveys all scene information to the brain to be perceived by the patient. As it provides optical processing, the proposed solution overcomes all drawbacks of the electronic solutions. To prove the validity of the proposed solution, three lenses were designed, fabricated, and tested to visualize simple shapes, reading, and obtaining aid during walking and driving. Obtaining the expected results from these tests, they were tried by three volunteers to clinically prove the validity and feasibility of the proposed optical aid. The feedback from the three patients was promising since all of them could recognize some of the details they used to miss with at least one of the lenses. Full article

Orbital angular momentum (OAM) encoding is a promising technique to boost data transmission capacity in optical communications. Most recently, azobenzene films have gained attention as a versatile tool for creating and altering OAM-carrying beams. Unique features of azobenzene films make it possible to control molecular alignment through light-induced isomerization about the azo bond. This feature enables the fabrication of diffractive optical devices such as spiral phase plates and holograms by accurately imprinting a phase profile on the incident light. By forming azobenzene sheets into diffractive optical elements, such as spiral phase plates, one can selectively create OAM-carrying beams. Due to the helical wavefront and phase variation shown by these beams, multiple distinct channels can be encoded within a single optical beam. This can significantly increase the data transmission capacity of optical communication systems with this OAM multiplexing technique. Additionally, holographic optical components made from azobenzene films can be used to build and reconstruct intricate wavefronts. It is possible to create OAM-based holograms by imprinting holographic designs on azobenzene films, which makes it simpler to control and shape optical beams for specific communication requirements. In addition, azobenzene-based materials can then be suitable for integration into optical communication devices because of their reconfigurability, compactness, and infrastructure compatibility, which are the main future perspectives for achieving OAM-based technologies for the next generation, among other factors. In this paper, we see the possible use of azobenzene films in the generation and modification of OAM beams for optical communications through light-induced isomerization. In addition, the potential role of azobenzene films in the development of novel OAM-based devices that paves the way for the realization of high-capacity, OAM-enabled optical communication networks are discussed. Full article

The most effective methods for the synthesis of nanostructured copper and zinc oxides, which have unique properties and potential applications in a variety of fields including electronics, photonics, sensorics, and energy conversion, are analyzed. Special attention is paid to laser-based methods for synthesizing oxide nanostructures, with an emphasis on the importance of controlling power density distribution to influence the quality and properties of the nanomaterials. The great significance of wavefront shaping techniques for controlling laser-initiated processes is highlighted, which enable precise control over the phase and amplitude of light waves to achieve desired outcomes in optics and laser-assisted formation of one- and two-dimensional structures of oxide semiconductor materials. Diffractive computer optics is presented as a powerful tool for precise beam control. The significance of laser-induced thermochemical processes for creating and improving the properties of ZnO and CuO-based nanomaterials is discussed. The presented analysis shows that the synthesis of nanocomposites based on ZnO and CuO using pulse-periodic laser treatment, coupled with precise laser beam control using free-form diffractive optics, presents novel opportunities for applications in optoelectronics, sensor technology, electronics and portable energy sources manufacturing, and various other fields. Full article

Manipulating the wavefront of coherent light incident on scattering media to enhance the imaging depth, sensitivity, and resolution is a common technique in biomedical applications. Local phase variations cause changes in the interference and can be used to create a focus inside or behind a scattering medium. We use wavefront shaping (WFS) to force constructive interference at an arbitrary location. The amount of light transmitted into a given region strongly depends on the scattering and absorption characteristics. These are described by their respective coefficients ${\mu }_s$ and ${\mu }_a$ and the scattering phase function. Controlling the scattering and absorption coefficients, we study the behavior of wavefront shaping and the achievable intensity enhancement behind volume scattering media with well-defined optical properties. The phantoms designed in this publication are made of epoxy resin. Into these epoxy matrices, specific amounts of scattering and absorbing particles, such as titanium dioxide pigments and molecular dyes, are mixed. The mixture obtained is filled into 3D-printed frames of various thicknesses. After a precise fabrication procedure, an integrating sphere-based setup characterizes the phantoms experimentally. It detects the total hemispherical transmission and reflection. Further theoretical characterization is performed with a newly developed hybrid $P_N$ method. This method senses the flux of light into a particular angular range at the lower boundary of a slab. The calculations are performed without suffering from ringing and fulfill the exact boundary conditions there. A decoupled two-path detection system allows for fast optimization as well as sensitive detection. The measurements yield results that agree well with the theoretically expected behavior. Full article

In Structural Health Monitoring (SHM) applications, the Direction of Arrival (DoA) estimation of Guided Waves (GW) on sensor arrays is often used as a fundamental means to locate Acoustic Sources (AS) generated by damages growth or undesired impacts in thin-wall structures (e.g., plates or shells). In this paper, we consider the problem of designing the arrangement and shape of piezo-sensors in planar clusters in order to optimize the DoA estimation performance in noise-affected measurements. We assume that: (i) the wave propagation velocity is unknown, (ii) the DoA is estimated via the time delays of wavefronts between sensors, and (iii) the maximum value of the time delays is limited. The optimality criterion is derived basing on the Theory of Measurements. The sensor array design is so that the DoA variance is minimized in an average sense by exploiting the Calculus of Variations. In this way, considering a three-sensor cluster and a monitored angles sector of 90°, the optimal time delays–DoA relations are derived. A suitable re-shaping procedure is used to impose such relations and, at the same time, to induce the same spatial filtering effect between sensors so that the sensor acquired signals are equal except for a time-shift. In order to achieve the last aim, the sensors shape is realized by exploiting a technique called Error Diffusion, which is able to emulate piezo-load functions with continuously modulated values. In this way, the Shaped Sensors Optimal Cluster (SS-OC) is derived. A numerical assessment via Green’s functions simulations shows improved performance in DoA estimation by means of the SS-OC when compared to clusters realized with conventional piezo-disk transducers. Full article

Recently, the realization of the spiral mass transfer of matter has attracted the attention of many researchers. Nano- and microstructures fabricated with such mass transfer can be used for the generation of light with non-zero orbital angular momentum (OAM) or the sensing of chiral molecules. In the case of metals and semiconductors, the chirality of formed spiral-shaped microstructures depends on the topological charge (TC) of the illuminating optical vortex (OV) beam. The situation is quite different with polarization-sensitive materials such as azopolymers, azobenzene-containing polymers. Azopolymers show polarization-sensitive mass transfer both at the meso and macro levels and have huge potential in diffractive optics and photonics. Previously, only one-spiral patterns formed in thin azopolymer films using circularly polarized OV beams and double-spiral patterns formed using linearly polarized OV beams have been demonstrated. In these cases, the TC of the used OV beams did not affect the number of formed spirals. In this study, we propose to use two-beam (an OV and a Gaussian beam with a spherical wavefront) interference lithography for realization spiral mass transfer with the desired number of formed spirals. The TC of the OV beam allows for controlling the number of formed spirals. We show the microstructures fabricated by the laser processing of thin azopolymer films can be used for the generation of OAM light at the microscale with the desired TC. The experimentally obtained results are in good agreement with the numerically obtained results and demonstrate the potential of the use of such techniques for the laser material processing of polarization-sensitive materials. Full article

Recently, terahertz waves of higher frequencies compared to microwave and radio frequency have shown great potential in radar detection and high-speed wireless communication. To spatially control the wavefront of terahertz beams, various novel components, such as terahertz filters, polarization converters and lenses, have been investigated. Metamaterials and metasurfaces have become the most promising technique for the free manipulation of terahertz waves. Metadevices integrated with liquid crystals have been widely used in active terahertz devices. In this review, the birefringence of liquid crystals in the terahertz band and terahertz devices based on liquid crystals are summarized. By integrating liquid crystals with plasmonic metamaterials, the functions become dynamically adjustable and are reconstructed. Utilizing liquid crystals to change the resonance of metamaterials, tunable filters, absorbers, and programmable metasurfaces are realized. To solve the problem of low efficiency, terahertz wavefront shaping devices based on dielectric metasurfaces and liquid crystals, such as a variable deflection angle grating and zoom metalenses, are presented. Finally, we discuss and anticipate the future developments of liquid-crystal-integrated meta-devices, which will inspire broad applications in terahertz communication and imaging. Full article

In this work, we propose to design a liquid crystal–based modular and extendable platform of cutting-edge optical technologies for studying materials based on the analysis of polarization and wavefront of light in the wavelength range of 10–50 μm, which is considered to work even in the longer wavelengths range. This platform will be driven by the future THz-FEL source TerRa@BriXSinO that produces high power radiation in THz-range from 6 THz up to 30 THz (Mid-/Far-IR). The lack of optical infrastructures in this range has been tackled by fabricating liquid crystal–based geometric phase components that have been specifically designed for this purpose. This is in order to optimally exploit all the source’s potential for maximum accuracy and efficiency in determining polarization- and wavefront-sensitive properties of materials. We present an overview of a few experiments for characterizing bulk inhomogeneities, dielectric anisotropy, surface roughness, cracks, impact damages, and stress and strain effects with special emphasis on non-destructive tests on composite structures. The tools for wavefront shaping developed within our platform will be exploited to add a further degree of freedom, i.e., orbital angular momentum, to nonlinear optics techniques, such as Terahertz Hyper-Raman spectroscopy, for investigating chiral agents’ properties. Full article

This paper proposes a method with an off-axis interferometer and an ensemble deep learning (I-EDL) hologram-classifier to interpret noisy digital holograms captured from the tissues of flawed biological specimens. The holograms are captured by an interferometer, which serves as a digital holographic scanner to scan the tissue with 3D information. The method achieves a high success rate of 99.60% in identifying the specimens through the tissue holograms. It is found that the ensemble deep learning hologram-classifier can effectively adapt to optical aberration coming from dust on mirrors and optical lens aberrations such as the Airy-plaque-like rings out-turn from the lenses in the interferometer. The deep learning network effectively adapts to these irregularities during the training stage and performs well in the later recognition stage without prior optical background compensations. The method does not require an intact sample with a full outline shape of the specimens or the organs to understand the objects’ identities. It demonstrates a new paradigm in object identification by ensemble deep learning through a direct wavefront recognition technique. Full article

Locating cracks in a solid object using acoustic emission (AE) is useful both for detecting defects during safety monitoring and for basic laboratory studies of fractures. We developed an acoustic source location (ASL) method without the use of velocity information with AE in anisotropics plates, such as carbon fiber-reinforced polymers. Assuming that the propagation velocity of an unknown elastic wave is constant in anisotropic materials, the objective function to be minimized is defined based on the elliptic wavefront shape-based technique. The objective function is minimized using an iterative method, such as the gradient descent method. As a result of the numerical experiments and PLB testing on a carbon fiber-reinforced polymer plate, the method is accurate within 5% and is stable against noise. Full article