Search Results (1,744)

The ongoing global climate change has led to an increase in the frequency and complexity of drought events. Pinus yunnanensis, a native tree species in southwest China that possesses significant ecological and economic value, exhibits a high sensitivity to drought stress, particularly in its seedlings. This study investigates the response mechanisms of non-structural carbohydrates (NSCs, defined as the sum of soluble sugars and starch) and the stoichiometric characteristics of carbon (C), nitrogen (N), and phosphorus (P) to repeated drought conditions in Pinus yunnanensis seedlings. We established three treatment groups in a potting water control experiment involving 2-year-old Pinus yunnanensis seedlings: normal water supply (CK), a single drought (D1), and three drought–rewatering cycles (D3). The findings indicated that the frequency of drought occurrences, organ responses, and their interactions significantly influenced the non-structural carbohydrate (NSC) content and its fractions, as well as the C/N/P content and its stoichiometric ratios. Under D3 treatment, stem NSC content increased by 24.97% and 29.08% compared to CK and D1 groups (p < 0.05), respectively, while root NSC content increased by 41.35% and 49.46% versus CK and D1 (p < 0.05). The pronounced accumulation of soluble sugars and starch in stems and roots under D3 suggests a potential stress memory effect. Additionally, NSC content in the stems increased significantly by 77.88%, while the roots enhanced their resource acquisition by dynamically regulating the C/P ratio, which increased by 23.26% (p < 0.05). Needle leaf C content decreased (18.77%) but P uptake increased (8%) to maintain basal metabolism (p < 0.05). Seedling growth was N-limited (needle N/P < 14) and the degree of N limitation was exacerbated by repeated droughts. Phenotypic plasticity indices and principal component analysis revealed that needle nitrogen and phosphorus, soluble sugars in needles, stem C/N ratio (0.61), root C/N ratio (0.53), and stem C/P ratio were crucial for drought adaptation. This study elucidates the physiological mechanisms underlying the resilience of Pinus yunnanensis seedlings to recurrent droughts, as evidenced by their organ-specific strategies for allocating carbon, nitrogen, and phosphorus, alongside the dynamic regulation of nitrogen storage compounds (NSCs). These findings provide a robust theoretical foundation for implementing drought-resistant afforestation and ecological restoration initiatives targeting Pinus yunnanensis in southwestern China. Full article

Amino acids (AAs), a type of nitrogen-based organic compounds in the atmosphere, are directly and indirectly related to climate change, and as their link to allergic diseases becomes more known, the need for quantitative analysis of ultrafine dust (PM_2.5) will become increasingly necessary. When sensing water-soluble AAs using a gas chromatograph combined with a tandem mass spectrometer (GC-MS/MS), derivatization should be considered to increase the volatility and sensitivity of target analytes. In this study, two methods were used to compare and evaluate 13 AA derivatives in PM_2.5 samples: N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide with 1% tert-butyldimethylchlorosilane (MTBSTFA w/1% t-BDMCS), which is preferred for silylation, and ethyl chloroformate (ECF) with methanol (MeOH) for chloroformate derivatization. The most appropriate reaction conditions for these two derivative methods, such as temperature and time, and the analytical conditions of GC-MS/MS for the qualitative and quantitative analysis of AAs were optimized. Furthermore, the calibration curve, detection limit, and recovery of both methods for validating the quantification were determined. The two derivative methods were applied to 23 actual PM_2.5 samples to detect and quantify target AAs. The statistical significances between pairwise measurements of individual AAs detected by both methods were evaluated. This study will help in selecting and utilizing appropriate derivative methods for the quantification of individual AAs in PM_2.5 samples. Full article

Developing a rapidly gel-forming, in situ sprayable hydrogel with wound dressing functionality is essential for enhancing the wound healing process. In this study, a novel sprayable hydrogel-based wound dressing was developed by combining thermo- and pH- responsive polymers including Pluronic F127 (PF127) and N-succinyl chitosan (NSC). NSC was prepared by modifying chitosan with succinic anhydride, as confirmed by Fourier-transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. The NSC synthesized using a succinic anhydride-to-chitosan molar ratio of 5:1 exhibited the highest degree of substitution, resulting in a water-soluble polymer effective over a broad pH range. The formulation process of the PF127:NSC sprayable hydrogel was optimized and evaluated based on its sol–gel phase transition behavior, clarity, gelation time, liquid and moisture management, stability, and cytotoxicity. These properties can be suitably tailored by adjusting the concentrations of PF127 and NSC. Moreover, the antioxidant capacity of the hydrogels was enhanced by incorporating Azadirachta indica (neem) extract, a bioactive compound, into the optimized sprayable hydrogel. Both neem release and antioxidant activity increased in a dose-dependent manner. Overall, the developed sprayable hydrogel exhibited favorable sprayability, appropriate gelation properties, controlled drug release, and antioxidant activity, underscoring its promising translational potential as a wound dressing. Full article

With the growth of the plant-based food sector, increasing amounts of by-products are generated. Sea buckthorn pomace (SBP), a by-product of juice and other manufacturing products, is rich in bioactive compounds such as phenolics, oligosaccharides, proteins, and dietary fiber. The aim of the study was to evaluate the impact of modification methods, such as enzymatic hydrolysis and supercritical carbon dioxide extraction (SFE-CO₂), on the chemical composition and technological properties of SBP. SBP and SBP obtained after SFE-CO₂ (SBP-CO₂) were enzymatically modified using Pectinex^® Ultra Tropical, Viscozyme^® L, and Celluclast^® 1.5 L (Novozyme A/S, Bagsværd, Denmark). The SBP’s main constituent was insoluble dietary fiber (IDF), followed by crude proteins and lipids (respectively, 58.7, 21.1 and 12.6 g/100 in d.m.). SFE-CO₂ reduced the lipid content (by 85.7%) in the pomace while increasing protein and TDF content. Enzymatic hydrolysis decreased the content of both soluble dietary fiber (SDF) and IDF, and increased the content of mono- and oligosaccharides as well as free phenolics, depending on the commercial enzyme preparation used in SBP and SBP-CO₂ samples. Celluclast^® 1.5 L was the most effective in hydrolyzing IDF, while Viscozyme^® L and Pectinex^® Ultra Tropical were the most effective in degrading SDF. Enzymatic treatment improved water swelling capacity, water retention capacity, water solubility index, oil retention capacity of SBP and SBP-CO₂; however, it did not have a significant effect on the stability of the emulsions. Modification of SBP by SFE-CO₂ effectively increased WSC and WSI, however it reduced WRC. These findings highlight the potential of targeted modifications to enhance the nutritional and technological properties of SBP for functional food applications. Full article

The increasing prevalence of antibiotic resistance and the limited availability of antiviral therapeutics for pathogens such as human respiratory syncytial virus (hRSV) underscore the need for novel, plant-derived antimicrobial substances. In this study, we evaluated the antiproliferative, antibacterial, and antiviral activities of aqueous leaf extracts from two plants commonly found in North America, Osage orange (M. pomifera) and spearmint (M. spicata). Both extracts exhibited no significant cytotoxic or morphologic impact on HEp-2 human cancer cells up to 25 mg/mL. However, both extracts demonstrated strong dose-dependent antibacterial activity, significantly inhibiting replication of E. coli and S. aureus at concentrations ≥ 1 mg/mL. Antiviral assays revealed that both extracts inhibited hRSV infectivity, with spearmint extract showing higher potency (EC₅₀ = 1.01 mg/mL) compared to Osage orange (EC₅₀ = 3.85 mg/mL). Gas chromatography–mass spectrometry (GC-MS) identified three major extract constituents: 3-hydroxybenzyl alcohol, 4-hydroxybenzyl alcohol (Osage orange), and R-(-)-carvone (spearmint). Among these, only carvone significantly inhibited hRSV in vitro, suggesting its key role in spearmint’s antiviral activity. These findings highlight the therapeutic potential of Osage orange and spearmint leaf extracts, particularly as sources of water-soluble compounds with antimicrobial properties, and support further investigation into their mechanisms of action and broader clinical relevance. Full article

One of the promising research areas involving carborane derivatives is boron neutron capture therapy (BNCT). Due to the high boron atom content in carborane molecules, these compounds are considered potential candidates for BNCT-based cancer treatment. Despite ongoing studies on various biologically active carboranyl-containing compounds, the search continues for substances that meet the stringent requirements of effective BNCT agents. In this study, the synthesis of carboranyl-containing derivatives of β-arylaliphatic acids is described, along with the investigation of their reactivity with primary and secondary amines, as well as with metals and their hydroxides. The molecular structures of the synthesized compounds were confirmed using Fourier-transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, elemental analysis, and mass spectrometry (LC-MS). Cytotoxicity of the water-soluble compound potassium 3-(2-isopropyl-1,2-dicarba-closo-dodecaboran-1-yl)-3-phenylpropanoate was evaluated using several cell lines, including HdFn and MCF-7. Full article

High-mobility group box 1 (HMGB1) is a nuclear protein that can interact with a transmembrane cell surface receptor for advanced glycation end products (RAGEs) and mediates the inflammatory pathways that lead to various pathological conditions like cancer, diabetes, cardiovascular diseases, and neurodegenerative disorders. Blocking the HMGB1/RAGE axis using various small synthetic or natural molecules has been proven to be an effective therapeutic approach to treating these inflammatory conditions. However, the low water solubility of these pharmacoactive molecules limits their clinical use. Pharmaceutically active molecules with low solubility and bioavailability in vivo convey a higher risk of failure for drug development and drug innovation. The pharmacokinetic and pharmacodynamics parameters of these compounds are majorly affected by their solubility. Enhancement of the bioavailability and solubility of drugs is a significant challenge in the area of pharmaceutical formulations. This review mainly describes various technologies utilized to improve the bioavailability of synthetic or natural molecules which have been particularly used in various inflammatory conditions acting specifically through the HMGB1/RAGE pathway. Full article

Arabinoxylan is a polysaccharide with film-forming properties, present in corn fiber, and a low-value by-product. The extract has a deep brown color, producing films of the same shade, which may not be appealing. This study addresses, for the first time, the adsorption of colored compounds present in an arabinoxylan extract using resin MN102. The resin successfully adsorbed the colored compounds from the arabinoxylan extract. After four consecutive adsorption/desorption cycles, the efficiency of the resin was similar, only decreasing from 63.3% to 52.9%. Langmuir and Freundlich models were fitted to the results of adsorption isotherm experiments, with the Freundlich model demonstrating the best fit to the experimental results. A fixed-bed column loaded with the resin was used for the removal of the colored compounds from the arabinoxylan extract, and the effect of the volumetric flow rate was investigated. The Yan and log-Gompertz models showed the best fit to the experimental breakthrough curves. This study systematically evaluated the adsorption conditions, providing a comprehensive analysis of the performance of the resin in the removal of the colored compounds. Additionally, the ability of the extract to maintain its film-forming properties after decolorization was evaluated, and some of the film’s key characteristics were evaluated, namely its color, solubility in water and mechanical properties. Full article

Oral delivery of hydrophobic compounds remains challenging due to their poor aqueous solubility and the potential toxicity associated with conventional surfactant-based emulsions. To address these issues, we present a surfactant-free encapsulation strategy using electrosprayed alginate hydrogel beads for the stable and controlled delivery of hydrophobic oils. Hydrophobic compounds were dispersed in high-viscosity alginate solutions without surfactants via ultrasonication, forming kinetically stable oil-in-water dispersions. These mixtures were electrosprayed into calcium chloride baths, yielding monodisperse hydrogel beads. Higher alginate concentrations improved droplet sphericity and suppressed phase separation by enhancing matrix viscosity. The resulting beads exhibited stimuli-responsive degradation and controlled release behavior in response to physiological ionic strength. Dense alginate networks delayed ion exchange and prolonged structural integrity, while elevated external ionic conditions triggered rapid disintegration and immediate payload release. This simple and scalable system offers a biocompatible platform for the oral delivery of lipophilic active compounds without the need for surfactants or complex fabrication steps. Full article

Blackcurrant is a notable superfruit in Europe, and its vitamin C content surpasses the well-known blueberry superfruit. However, due to its short shelf life during storage, consumption is mainly accounted by frozen berries, extracts, and concentrates. This study applied an intensity of 1.2 W/m² UVC with different durations, including control (non-treated), UVC irradiation for 0.5 h (0.5 h treatment), UVC irradiation for 1 h (1 h treatment), and UVC pretreatment for 2 h (2 h treatment) to blackcurrant berries before storage. Fundamental physical (firmness and weight loss) and physicochemical characteristics (SSC, pH, and acids), microbial population changes, total phenolic content, antioxidant capacity, and specific phenolic compound changes were evaluated every five days over a twenty-day storage period. The results indicated that the longer the UVC pretreatment, the lower the water weight losses during storage. Meanwhile, the UVC pretreatment significantly affected the blackcurrant soluble solid content, resulting in higher soluble solid contents detected in the blackcurrants with the higher doses of UVC. For the mold population control, UVC effects were highly correlated with the pretreatment duration. However, UVC did not have a significant influence on the berry pH and acid contents, but the storage length slightly increased the pH and decreased the acids. At the same time, UVC pretreatment did not affect the berry firmness, polyphenols, ascorbic acid content, or antioxidant capacities, which were primarily influenced by the storage duration. The monophenolic compounds detected before and after storage indicated that more than one hour of UVC radiation influenced most of the phenolic contents largely before storage. The UVC pretreatment has also influenced some phenolic compounds. After storage, half an hour of UVC pretreatment increased cyanidin levels, and two hours of UVC pretreatment increased catechin and epicatechin levels. However, most of the compounds remained at similar amounts during storage in each treatment. Further research is needed to improve the UVC radiation time length or intensity or explore other technology combinations to optimize UVC pretreatments for blackcurrant storage. Full article

Cetraria islandica (L.) Ach. (CI) is a lichen from the Parmeliaceaea family used in medicine. However, the low solubility of CI secondary metabolites in water limits the application of lichen extract and compounds. It prompted us to study the systems of cyclodextrins (CDs) (β-CD, γ-CD, HP-β-CD, and HP-γ-CD) with the CI acetone or CI methanol extracts prepared using grinding and solvent evaporation methods. The content of fumarprotocetraric acid (FPCA), a key CI metabolite, was quantified using HPLC. CD–extract systems were characterized by X-ray powder diffraction (XRPD) and Fourier-transform infrared (FTIR) spectroscopy. Biological activity was evaluated using cell-free assays: a Folin–Ciocalteu analysis, DPPH test, acetylcholinesterase, butyrylcholinesterase, and tyrosinase inhibitions. Dissolution profiles were also assessed. The best biological and physicochemical results were obtained for systems prepared with HP-β-CD and HP-γ-CD via solvent evaporation, showing higher activity and enhanced FPCA release compared to the pure extracts. To the best of our knowledge, this is the first study to report the preparation and characterization of CD-based systems with CI extracts. The obtained results encourage us to continue our research on CI to improve the physicochemical properties of its active compounds. Full article

Amaranth is a nutritional and naturally gluten-free pseudocereal with several food applications. The germination and pepsin/pancreatin hydrolysis in amaranth releases antioxidant and anti-inflammatory compounds but the hydrolysis times (270 or 360 min) are too long to scale up in the development of amaranth functional ingredients. The aim of this study was to estimate the influence of the germination and pepsin/pancreatin hydrolysis reduction time on the techno-functional properties and nutraceutical potential of amaranth flours and hydrolysates. The germination process increased 12.5% soluble protein (SP), 23.7% total phenolics (TPC), 259% water solubility, and 26% oil absorption in germinated amaranth flours (GAFs) compared to ungerminated amaranth flours (UAFs). The ungerminated (UAFH) and germinated (GAFH) amaranth hydrolysates showed values of degree of hydrolysis up to 50% with 150 min of sequential (pepsin + pancreatin) hydrolysis. The enzymatic hydrolysis released 1.5-fold SP and 14-fold TPC in both amaranth flours. The water solubility was higher in both hydrolysates than in their unhydrolyzed flour counterparts. The reduction in hydrolysis time did not significantly affect the nutraceutical potential of GAFH, enhancing its potential for further investigations. Finally, combining germination and enzymatic hydrolysis in amaranth enhances nutraceutical and techno-functional properties, increasing the seed. Consequently, GAF or GAFH could be used to elaborate on functional or gluten-free food products. Full article

Water supply and sewage drainage pipes have a critical role to play in the provision of clean water and sanitation, and pipe material selection influences infrastructure life, water quality, and microbial communities. Zinc-containing compounds are highly valued due to their mechanical properties, anticorrosion behavior, and antimicrobial properties. However, the effect of zinc salts, such as zinc sulfate heptahydrate and zinc chloride, on biofilm-forming bacteria, including Escherichia coli and Enterococcus faecalis, is not well established. This study investigates the antibacterial properties of these zinc salts under simulated pipeline conditions using minimum inhibitory concentration assays, biofilm production assays, and antibiotic sensitivity tests. Findings indicate that zinc chloride is more antimicrobial due to its higher solubility and bioavailability of Zn²⁺ ions. At higher concentrations, zinc salts inhibit the development of a biofilm, whereas sub-inhibitory concentrations enhance the growth of biofilm, suggesting a stress response in bacteria. zinc chloride also enhances antibiotic efficacy against E. coli but induces resistance in E. faecalis. These findings highlight the dual role of zinc salts in preventing biofilm formation and modulating antimicrobial resistance, necessitating further research to optimize material selection for water distribution networks and mitigate biofilm-associated risks in pipeline systems. Full article

This study aimed to investigate the effect of wildfire episodes on air quality in terms of particulate matter (PM) and carbonaceous compound concentration in ambient air, and to assess deviations from typical annual patterns. The sampling was performed at a rural background site near the Adriatic coast in Croatia through 2024. To better understand contributions caused by fire events, the levels of organic carbon (OC), elemental carbon (EC), black carbon (BC), pyrolytic carbon (PyrC), optical carbon (OptC), water-soluble organic carbon (WSOC), levoglucosan (LG), mannosan (MNS), and galactosan (GA) were determined in PM₁₀ and PM_2.5 fractions (particles smaller than 10 µm and 2.5 µm, respectively). The annual mean concentrations of PM₁₀ and PM_2.5 were 14 µg/m³ and 8 µg/m³, respectively. During the fire episode, the PM_2.5 mass contribution to the total PM₁₀ mass exceeded 65%. Total carbon (TC) and OC increased by a factor of 7, EC and BC by 12, PyrC by 8, and WSOC by 12. The concentration of LG reached 1.219 μg/m³ in the PM₁₀ fractions and 0.954 μg/m³ in the PM_2.5 fractions, representing a 200-fold increase during the fire episode. Meteorological data were integrated to assess atmospheric conditions during the fire episode, and the specific ratios between fire-related compounds were analyzed. Full article

Aluminothermic reduction is an alternative processing route for the circular economy because Al is produced electrochemically in the Hall–Héroult process with minimal CO₂ emissions if the electricity input is sourced from non-fossil fuel energy sources. This circular processing option attracts increased research attention in the aluminothermic production of manganese and silicon alloys. The Al₂O₃ product must be recycled through hydrometallurgical processing, with leaching as the first step. Recent work has shown that the NaAlO₂ compound is easily leached in water. In this work, a suitable slag formulation is applied in the aluminothermic reduction of manganese ore to form a Na₂O-based slag of high Al₂O₃ solubility to effect good alloy–slag separation. The synergistic effect of carbon and silicon reductants with aluminium is illustrated and compared to the test result with only carbon reductant. The addition of small amounts of carbon reductant to MnO₂-containing ore ensures rapid pre-reduction to MnO, facilitating aluminothermic reduction. At 1350 °C, a loosely sintered mass formed when carbon was added alone. The alloy and slag chemical analyses are compared to the thermochemistry predicted phase chemistry. The alloy consists of 66% Mn, 22–28% Fe, 2–9% Si, 0.4–1.4% Al, and 2.2–3.5% C. The higher %Si alloy is formed by adding Si metal. Although the product slag has a higher Al₂O₃ content (52–55% Al₂O₃) compared to the target slag (39% Al₂O₃), the fluidity of the slags appears sufficient for good alloy separation. Full article