Search Results (1,299)

Microbial components are part of the composition of all waste, including lignocellulosic biomass (e.g., agricultural, domestic, industrial, and municipal wastes) generated via human activities. If little attention is given to these wastes or if they are not adequately managed, they tend to end up in the environment (soil, water, and farmland), decomposing naturally through microbial activities, producing greenhouse gases, causing eutrophication, preventing sunlight penetration, and depleting oxygen in the water. Several treatment methods are applicable to these wastes. However, anaerobic digestion is presented as the best option to properly treat the waste. It is regarded as the best technique to achieve sustainable energy development in both developing and developed countries. During anaerobic digestion, the organic matter in the waste is converted via the concerted activities of microbes belonging to different trophic levels, in the absence of oxygen, to yield biogas (renewable energy), bio-fertiliser, and sanitisation of the waste, rendering it better and safer for human handling. Varying levels of loss of bacterial viability and their antibiotic-resistance genes are observed with this process, as bacteria differ in susceptibility to temperature, pH, nutrient scarcity, and the presence of antimicrobials. Anaerobic digestion of agricultural residues and the immediate processing (post-treatment) of the digestate help to stabilise the digestate, making it safe for land applications, tackling waste management, and protecting food chains from contamination, in addition to the environment. This review focuses on the anaerobic digestion of lignocellulosic biomass, yielding biogas as energy, alongside sanitising the wastes by inactivating microbial components found therein, therefore reducing the contamination potential of the effluent or digestate discharged from the biodigester following the process. Several findings registered by different researchers through different studies performed in different countries under different scenarios while employing varying methods have been assembled in a chronological fashion to emphasise similarities and divergences or variations that deepen knowledge pertaining to the significance of the anaerobic digestion process in terms of the microbial interactions responsible for producing energy, addressing sanitisation and hygiene crisis, and the post-treatment of the digestate to ensure its use as biofertiliser. In other words, it is a comprehensive review that synthesises knowledge from multiple fields covering comparative aspects of anaerobic digestion in terms of sanitation, hygiene, and energy production and consolidates it in a single document to present and address the problem of waste management through anaerobic digestion technology. Full article

The article examines the waste management challenges associated with basalt fiber-based mineral insulation materials generated during the production of thermal insulation products. In response to the environmental and economic issues linked to their disposal, a chemical processing approach is proposed to convert this waste into a mineral powder suitable for construction applications, particularly as an additive in asphalt concrete. A detailed technological scheme of the chemical treatment process is presented, and the optimal proportions of waste, water, and electrolyte (sulfuric acid), along with the corresponding processing conditions, are identified. The chemical and mineralogical composition of the raw materials and the resulting powder are investigated, and laboratory tests are carried out confirming its suitability as an active mineral additive. The chemical and mineralogical characteristics of the raw waste and resulting product are analyzed using XRD, SEM-EDS, and standard physical tests. In addition, the proposed technology provides a notable reduction in waste volume, thereby decreasing the load on landfills and contributing to more sustainable resource utilization. Full article

Selecting a sustainable healthcare waste treatment method is a complex multi-criteria problem influenced by environmental, economic, social and technological factors. This study addresses key gaps in the literature by proposing an intuitionistic fuzzy AHP–TOPSIS framework that explicitly models cognitive uncertainty and expert hesitation, while demonstrating its application through a real-world case study in Adana, Türkiye. In contrast to prior studies utilizing fewer criteria, our framework evaluates four treatment alternatives—incineration, steam sterilization, microwave, and landfill—across 17 comprehensive criteria that directly integrate circular economy principles such as resource recovery and energy efficiency. The results indicate that steam sterilization is the most sustainable option, demonstrating superior performance across environmental, economic, social, and technological dimensions. A 15-scenario sensitivity analysis ensures ranking resilience across varying decision contexts. Furthermore, a systematic comparative analysis highlights the methodological advantages of the proposed framework in terms of analytical granularity and robustness compared to existing models. The study also offers step-by-step operational guidance, creating a transparent and policy-responsive decision-support tool for healthcare waste management authorities to advance sustainable practices. Full article

Additive Manufacturing (AM) has emerged as a transformative technology enabling the production of complex geometries and customized components with minimal material waste. Within this field, the processing of ceramic materials represents a rapidly expanding research area due to their exceptional mechanical, thermal, and chemical properties. This work presents a comprehensive review of additive manufacturing processes applied to ceramics, such as Vat Photopolimerization, Binder Jetting and Laser Powder Bed Fusion, emphasizing their technological principles and capabilities. Particular attention is given to material extrusion-based additive manufacturing (MEX-AM) for ceramics, detailing its process mechanisms, rheological requirements, feedstock formulations and post-processing treatments necessary to achieve high-density and defect-free components. Furthermore, the study develops a sustainability-oriented evaluation of the ceramic MEX-AM process, addressing its environmental, economic, and social dimensions. Based on this assessment, several methodological approaches and tools are proposed to enhance process sustainability, as well as its alignment with Circular Economy principles. The outcomes of this research provide an integrated perspective on the sustainable development of ceramic additive manufacturing, supporting future advancements in Circular Design, process optimization, and industrial implementation. Full article

Bio-based fertilisers (BBFs) derived from waste streams represent a transformative approach to sustainable agriculture, addressing the dual challenges of waste management and food security. This comprehensive review examines recent advances in BBF production technologies, nutrient recovery mechanisms, soil health impacts, and the benefits of a circular economy. This review, based on an analysis of peer-reviewed studies, demonstrates that BBFs consistently improve the physical, chemical, and biological properties of soil while reducing environmental impacts by 15–45% compared to synthetic alternatives. Advanced biological treatment technologies, including anaerobic digestion, vermicomposting, and biochar production, achieve nutrient recovery efficiencies of 60–95% in diverse waste streams. Market analysis reveals a rapidly expanding sector projected to grow from $2.53 billion (2024) to $6.3 billion by 2032, driven by regulatory support and circular economy policies. Critical research gaps remain in standardisation, long-term performance evaluation, and integration with precision agriculture systems. Future developments should focus on AI-driven optimisation, climate-adaptive formulations, and nanobioconjugate technologies. Full article

The expansion of unconventional hydrocarbon extraction in the Vaca Muerta Formation (Argentina) has increased the generation of oil-based drill cuttings (OBDCs), a hazardous waste containing up to 20 wt% total petroleum hydrocarbons (TPHs) and trace metals. These characteristics pose risks to soil and groundwater, highlighting the need for sustainable treatment technologies that minimize environmental impacts and enable resource recovery. This study evaluates slow pyrolysis as a thermochemical route for OBDC stabilization and valorization. Representative samples were characterized through proximate, ultimate, and metal analyses, confirming a complex hydrocarbon–mineral matrix with 78.1 wt% ash, 15.9 wt% volatile matter, and 12.5 wt% TPH. Thermogravimetric analysis (10–20 °C min⁻¹), combined with isoconversional methods, identified three pseudo-components with activation energies ranging from 41.9 to 104.5 kJ mol⁻¹. Slow pyrolysis experiments in a fixed bed (400–650 °C) reduced residual TPH to below 1 wt% at temperatures ≥ 400 °C, meeting Argentine criteria for non-hazardous solids. The process also produced a condensed liquid organic fraction, supporting its potential within circular-economy strategies. Overall, the results show that slow pyrolysis is a viable and sustainable technology for reducing environmental risks from OBDC while enabling resource and energy recovery, contributing to a broader understanding of their thermochemical treatment. Full article

The intensification of shrimp aquaculture is crucial for global food security, but poses significant environmental challenges. This review critically assesses the strengths and bottlenecks of two main treatment paradigms: in situ systems, chiefly biofloc technology (BFT), and advanced ex situ systems, such as recirculating aquaculture systems (RASs), constructed wetlands (CWs), and membrane bioreactors (MBRs). Although BFT enables nutrient recycling, it suffers from nitrate accumulation and a high energy demand. Likewise, ex situ technologies can achieve a high treatment efficiency, but contend with high costs, large footprints, or membrane fouling. In this review, we propose the strategic integration of microalgae, representing a universal and synergistic solution for overcoming these disparate bottlenecks. We dissect how a microalgal co-culture can simultaneously remove nitrate and reduce the aeration costs in BFT systems. Furthermore, we explore how microalgae-based units can serve as efficient polishing steps for RASs, enhance the performance of CWs, and mitigate fouling in MBRs. This review delves into the fundamental mechanisms of the microalgal–bacterial symbiosis that underpins these enhancements. Finally, we highlight the valorization of the resulting algal biomass as a high-value aquafeed ingredient, which can transform waste management into a value-creation opportunity. This review aims to provide a comprehensive roadmap for developing next-generation, microalgae-enhanced aquaculture systems. Full article

Berries are a valuable source of health-promoting substances, including vitamins, microelements, and polyphenols. Optimising the extraction efficiency of these compounds during processing is crucial to minimise their loss into the waste stream. Ultrasound technology is recognised as a sustainable and promising tool for improving extraction; however, previous literature has not sufficiently addressed the optimal point of its application in fruit puree processing, and its impact on the sensory properties of the final product has only occasionally been explored. As one of the first reports, this study aimed to determine the optimal moment for ultrasound application within a puree production scheme. In the second stage of the experiment, four recipes based on strawberry and haskap berry were tested. The results demonstrated the potential for enhancing sensory quality of puree by using an ultrasound treatment. It was found that the ultrasound-treated purees showed significantly higher pectin levels and improved rheological properties, while the content of anthocyanins and L-ascorbic acid remained mainly unchanged. This indicates that the non-thermal nature of ultrasound treatment can induce positive changes from a sensory and rheological point of view without causing the degradation of health-promoting compounds, offering a viable strategy for improving berry puree quality. Full article

The production of essential oils generates substantial quantities of solid post-distillation residues, a largely unutilized waste stream rich in bioactive compounds (e.g., phenolics, flavonoids) as well as polysaccharides. Managing this organic waste presents both environmental and economic challenges. This review critically examines environmentally friendly green innovations and resource-efficient technologies within circular bio-economy strategies for valorizing these residues, focusing on four primary conversion pathways: physico-mechanical, thermochemical, biological, and chemical methods. We highlight their potential for practical applications, including the extraction of active compounds for food, cosmetic, and pharmaceutical industries, utilization in agriculture, incorporation into construction materials and wastewater treatment. Despite these opportunities, wider industrial adoption remains limited by high processing costs and the lack of scalable, cost-effective technologies. Key research gaps included the need for methods applicable at the farm level, optimization of the residue-specific conversion process, and life-cycle assessments to evaluate environmental and economic impacts. Addressing these gaps is crucial to fully exploit the economic and ecological potential of post-distillation solid residues and integrate them into sustainable circular bio-economy practices through various processes. Full article

The increasing volume of produced water (PW) generated by oil extraction activities has intensified the need for environmentally sustainable strategies that enable its reuse and valorization. Biotechnological approaches, particularly those involving the microbial production of value-added compounds, offer a promising route for transforming PW from an industrial waste into a useful resource. In this context, bacterial exopolysaccharides (EPS) have gained attention due to their diverse functional properties and applicability in bioremediation, bioprocessing and petroleum-related operations. This study evaluated the potential of Lelliottia amnigena to synthesize EPS using oilfield PW as a component of the culture medium in stirred-tank bioreactors. Three conditions were assessed: a control using distilled water (dW), PW diluted to 25% (PW25%) and dialyzed PW (DPW). Batch experiments were conducted for 24 h, during which biomass growth, EPS accumulation and dissolved oxygen dynamics were monitored. Post-cultivation analyses included elemental and monosaccharide composition, scanning electron microscopy and rheological characterization of purified EPS solutions. EPS production varied among treatments, with dW and DPW yielding approximately 9.6 g L⁻¹, while PW25% achieved the highest productivity (17.55 g L⁻¹). The EPS samples contained fucose, glucose and mannose, with compositional differences reflecting the influence of PW-derived minerals. Despite reduced apparent viscosity under PW25% and DPW conditions, the EPS exhibited physicochemical properties suitable for biotechnological applications, including potential use in fucose recovery, drilling fluids and lubrication systems in the petroleum sector. The EPS also demonstrated substantial adsorption capacity, incorporating salts from PW and contributing to contaminant removal. This study demonstrates that PW can serve both as a substrate and as a source of functional inorganic constituents for microbial EPS synthesis, supporting an integrated approach to PW valorization. These findings reinforce the potential of EPS-based bioprocesses as sustainable green technologies that simultaneously promote waste mitigation and the production of high-value industrial bioproducts. Full article

In light of the persistently mounting pressure on urban and rural waste management, developing efficient, low-carbon, and resource-oriented waste treatment technologies represents a critical challenge demanding urgent breakthroughs. Thermophilic anaerobic digestion (TAD), possessing these advantages, demonstrates unique application prospects in food waste treatment. However, its inherent instability constrains its engineering-scale implementation. This paper systematically reviews existing laboratory and pilot-scale research, focusing on: (1) Thecomplex interactions and synergistic effects of primary inhibitory factors; (2) The dynamic characteristics of microbial communities and their adaptive restructuring mechanisms under thermophilic stress; (3) The efficacy and underlying mechanisms of co-digestion, process control, and two-phase system strategies. This study aims to establish a clear pathway from mechanistic understanding to engineering optimisation, providing a theoretical framework for enhancing the operational stability and scalability of the TAD process. Full article

Modern gastronomy strives to combine high-quality food with the preservation of nutritional value, microbiological safety, and the sustainable use of raw materials. With the development of culinary technologies, precise heat treatment methods are gaining increasing importance, enabling better process control and more consistent quality results. This analysis aims to present the effects of the sous-vide (SV) method on the quality of vegetables in comparison with conventional heat treatment methods, such as boiling in water, steaming, cooking under increased pressure, cooking in a microwave oven, baking, grilling, and the cook-vide method. Analysis of the scientific literature has shown that the sous-vide method usually allows for the retention of greater amounts of vitamins (especially vitamin C), phenolic compounds and minerals, resulting in products with higher nutritional value and bioavailability of bioactive ingredients. Maintaining a controlled, low temperature in a vacuum environment reduces the loss of water and volatile components, which has a positive impact on the process yield as well as the color, texture, and aroma of vegetables. SV processing enhances product digestibility, preserves natural appearance, and improves food safety. Due to its hermetic packaging and limited oxygen access, this method ensures good microbiological quality and extends product shelf life. In the food service industry, SV allows for repeatable results, high sensory and technological quality, and reduced food waste. In the context of contemporary nutritional challenges and the experiences of the COVID-19 pandemic, sous-vide technology is gaining importance as a method supporting food safety, sustainability, and efficient resource management in the food service industry. Full article

Coal mining releases large amounts of low-concentration methane. Its global warming potential per unit mass is about 21 times that of carbon dioxide. Approximately 13.5 billion cubic meters are directly emitted each year without utilization. This results in both energy waste and environmental issues. Technologies for utilizing methane with concentrations ≥8% are already mature. However, stable treatment of low-concentration methane remains challenging. Issues include unsustainable combustion and interference from impurities. This review provides a comprehensive overview of recent advances in the catalytic combustion of low-concentration methane, systematically examining reaction mechanisms, catalyst development (including noble metal catalysts, non-noble metal catalysts, and the role of supports), combustion methods, and numerical simulations. The analysis reveals that current research faces challenges such as mismatched catalyst performance under real conditions, insufficient combustion system stability, and gaps between numerical simulations and practice. Future work should focus on molecular-level catalyst design, integrated system innovation, and enhancing simulation predictive capabilities, thereby strengthening the link between basic research and engineering applications. This will promote the industrialization of efficient low-concentration methane utilization technologies, ultimately achieving both energy recovery and greenhouse gas emission reduction. Full article

Pt complexes have been used in human and veterinary oncology for more than 50 years and represent one of the most significant groups of cytostatics. There are a lot of Pt-based compounds, such as cisplatin, carboplatin and oxaliplatin, which exhibit high efficiency against many tumors. Their broad application in oncology medicine and improper waste disposal induce environmental pollution by platinum cytostatics and their metabolites. They can cause toxic effects to fauna and flora, even at low concentration levels. Currently used technologies for wastewater treatment are not sufficient in the case of platinum-based metabolites. Their high resistance and toxicity of their degradation byproducts pose a serious problem. In this review, currently applied platinum-based cytostatics, their possible metabolic mechanisms, environmental impact and technological methods for their removal from wastewater and patients’ urine are summarized. Special attention is paid to adsorption methods. Full article

Atrazine (ATZ), a typical triazine herbicide with a long half-life and recalcitrant biodegradation, contaminates water and soil, necessitating efficient removal technologies. Conventional adsorbents have limited capacity and stability, while sesame straw-derived biochar realizes agricultural waste recycling and provides an efficient, economical, and eco-friendly adsorbent. Sepiolite, a natural mineral with a unique fibrous structure and a high specific surface area, has attracted widespread attention. Therefore, in this work, the agricultural waste of sesame hulls and sepiolite were used as precursors to prepare a composite material of sesame hull biochar/sepiolite (KNPB) through co-mixing heat treatment, followed by sodium hydroxide activation and pyrolysis. The results showed that, under the conditions of an adsorbent dosage of 3 g/L, pH of 6.8, and an adsorption time of 360 min, the removal rate of 3 mg/L ATZ by KNPB was 89.14%. Reusability experiments further demonstrated that KNPB has the potential for practical application in water treatment. Additionally, by integrating adsorption kinetics and isotherm analysis with a suite of characterization results from BET, FTIR, and XPS, the adsorption mechanism of KNPB for ATZ was further clarified to be primarily based on pore-filling, π–π interactions, and hydrogen bonding. This study not only provides a new idea for the resource utilization of waste sesame straw, but also provides scientific guidance for the solution of atrazine pollution, which has important environmental and economic significance. Full article