Search Results (51)

Shock buffet is one of the critical issues affecting the aerodynamic performance, flight quality, and flight safety of large aircraft. To overcome the limitations of traditional experimental measurement methods, such as insufficient capability in capturing flow features and high cost, an integrated experimental system tailored for extreme cryogenic and high-Reynolds-number conditions is developed based on the conventional tuft technique. This system comprises “preparation of low-flow-disturbance fluorescent mini-tufts, high-efficiency large-area tuft taping, automatic generation of digital streamline, and flow topology analysis”. Furthermore, a technique for assessing the transonic shock buffet onset using dynamic flow visualization with fluorescent mini-tufts is proposed. This paper takes a typical supercritical airfoil as the research object. First, through high-precision numerical simulations, it reveals that low-energy, unstable boundary-layer separation is the core driving force for the development and maintenance of shock buffet, and that flow separation characteristics serve as an important basis for determining the shock buffet onset. Subsequently, experimental validation is conducted in a 0.3 m high-Reynolds-number transonic wind tunnel. Using a dual-excitation-band composite light source, simultaneous measurements of pressure-sensitive paint (PSP) and fluorescent mini-tuft patterns are realized. The experimental results show that under extreme conditions, characterized by a wide total temperature range of 110 K to 280 K and strong scouring at Mach numbers from 0.6 to 0.9, the fluorescent mini-tufts (approximately 0.05 mm in diameter) exhibit excellent flow-following capability without any detachment. The digitized flow patterns of the fluorescent mini-tufts, obtained via computer image recognition algorithms, clearly reveal the location and area of boundary-layer separation. The trends show good agreement with the cryogenic PSP results, providing an important reference for determining the shock buffet onset. Full article

Transonic buffet is a critical self-sustained shock/boundary-layer instability limiting the flight envelope of modern transport aircraft. This study investigates the interaction between shock buffet and forced wing motion on the Airbus XRF-1 wind tunnel model, using unsteady Reynolds-Averaged Navier–Stokes (URANS) simulations with the DLR TAU code. The investigation is carried out in deep buffet condition ($\mathrm{Ma}=0.84$, $\alpha =4.5^{\circ }$, $\mathrm{Re}=25\times {10}^6$) and validated against wind tunnel data at the same flow condition. The buffet flow is superimposed with forced wing motions derived from a symmetric wing eigenmode at $\mathrm{Sr}=0.164$. Two different amplitudes scaled with the half-span s are considered: $A_{tip}=0.0025·s$ and $0.01·s$. The baseline no-forcing URANS captures the buffet flow quite well with only small deviations in the standard deviation of the surface pressure coefficient $c_{p,rms}$. A special variant of the Discrete Fourier Transformation for the whole wing upper surface $c_p$ distribution revealed that the typical buffet frequencies are also matched. The analysis of the forced simulations revealed a strong influence of the local wing motion on the increase of $c_{p,rms}$. The spectral content showed a shift and damping or amplification of different buffet modes, which is relevant for the interaction of motion induced and buffed induced aerodynamic forces. Full article

Transonic compressors encounter significant challenges from shock formations due to high-speed supersonic blade tips, particularly at high altitudes where lower Reynolds numbers result in laminar boundary layer separation and increased mixing losses. Understanding shock wave–boundary layer interaction (SBLI) is essential for improving compressor performance. This study examines SBLI under varying Reynolds numbers, simulating higher altitude conditions in a transonic blow-down wind tunnel. Using an inlet valve setup to control inflow total pressure and Reynolds numbers, this study also reveals an increase in turbulence. The findings indicate that laminar-to-turbulent transition occurs upstream of the shock wave, resulting in interaction with a turbulent boundary layer, even at lower Reynolds numbers. Full article

Supercritical wings are widely used in large aircraft due to their excellent transonic performance, but their aerodynamic characteristics are highly sensitive to Reynolds number. To systematically study the influence of Reynolds number on the aerodynamic characteristics of a supercritical wing, cryogenic high Reynolds number pressure measurement tests were conducted in the European Transonic Wind Tunnel (ETW). A 1:17.87 scale wing-body combination model of a typical supercritical wing was employed. The Reynolds number was increased via the pressure increase and cooling technique, covering a test Reynolds number range from 2.3 × 10⁶ to 3.5 × 10⁷. Model deformation effects were isolated to obtain pressure data reflecting pure Reynolds number effects. The variation patterns of pressure distribution, lift characteristics, and pitching moment characteristics with Reynolds number were analyzed. The results indicate that, at lower speeds (Ma = 0.4 and 0.6), the supercritical wing is less affected by Reynolds number; the upper surface is more significantly influenced by Reynolds number than the lower surface; the Reynolds number effect primarily manifests in the transonic regime by delaying the onset position of the shock wave on the upper wing surface, thereby affecting aerodynamic force characteristics; several aerodynamic characteristic parameters such as ΔC_L, α₀, and C_m exhibit a linear relationship with the logarithm of Reynolds number. Experimental results obtained at low Reynolds numbers cannot be directly extrapolated to actual flight conditions, necessitating the consideration of Reynolds number effect in the aerodynamic design optimization of large aircraft. Full article

The trend towards higher bypass ratios and downsized cores in modern compressors leads to locally reduced Reynolds numbers, intensifying flow separation and unsteadiness, which limits the reliability of RANS models and motivates the use of LES as a feasible and attractive high-fidelity approach for these conditions. In this paper, we assess the capabilities of low- and high-fidelity numerical tools for predicting the effects of varying incidence angles for a linear compressor cascade at a Reynolds number of 150,000 and a Mach number of 0.6 based on the inflow conditions. The comparison is supported by experiments carried out at the Transonic Cascade Wind Tunnel at the DLR in Cologne, which feature an incidence angle variation of plus/minus 5 degrees. Particular emphasis is put on the numerical setup to reproduce the cascade experiment, discussing the effects of spanwise domain size, axial-velocity density ratio and inflow turbulence. The effects of the incidence angle variation are studied on the basis of instantaneous and mean flow quantities with a focus on separation, transition and loss mechanisms. Full article

This paper addresses the long-standing question of understanding the origin and evolution of low-frequency unsteadiness interactions associated with shock waves impinging on a turbulent boundary layer in transonic flow (Mach: $1.1$ to $1.3$). To that end, high-speed experiments in a blowdown open-channel wind tunnel have been performed across a convergent–divergent nozzle for different expansion ratios (PR = 1.44, 1.6, and 1.81). Quantitative evaluation of the underlying spectral energy content has been obtained by processing time-resolved pressure transducer data and Schlieren images using the following spectral analysis methods: Fast Fourier Transform (FFT), Continuous Wavelet Transform (CWT), as well as coherence and time-lag evaluations. The images demonstrated the presence of increased normal shock-wave impact for PR = 1.44, whereas the latter were linked with increased oblique $\lambda$-foot impact. Hence, significant disparities associated with the overall stability, location, and amplitude of the shock waves, as well as quantitative assertions related to spectral energy segregation, have been inferred. A subsequent detailed spectral analysis revealed the presence of multiple discrete frequency peaks (magnitude and frequency of the peaks increasing with PR), with the lower peaks linked with large-scale shock-wave interactions and higher peaks associated with shear-layer instabilities and turbulence. Wavelet transform using the Morlet function illustrates the presence of varying intermittency, modulation in the temporal and frequency scales for different spectral events, and a pseudo-periodic spectral energy pulsation alternating between two frequency-specific events. Spectral analysis of the pixel densities related to different regions, called spatial FFT, highlights the increased influence of the feedback mechanism and coupled turbulence interactions for higher PR. Collation of the subsequent coherence analysis with the previous results underscores that lower PR is linked with shock-separation dynamics being tightly coupled, whereas at higher PR values, global instabilities, vortex shedding, and high-frequency shear-layer effects govern the overall interactions, redistributing the spectral energy across a wider spectral range. Complementing these experiments, time-resolved numerical simulations based on a transient 3D RANS framework were performed. The simulations successfully reproduced the main features of the shock motion, including the downstream migration of the mean position, the reduction in oscillation amplitude with increasing PR, and the division of the spectra into distinct frequency regions. This confirms that the adopted 3D RANS approach provides a suitable predictive framework for capturing the essential unsteady dynamics of shock–boundary layer interactions across both temporal and spatial scales. This novel combination of synchronized Schlieren imaging with pressure transducer data, followed by application of advanced spectral analysis techniques, FFT, CWT, spatial FFT, coherence analysis, and numerical evaluations, linked image-derived propagation and coherence results directly to wall pressure dynamics, providing critical insights into how PR variation governs the spectral energy content and shock-wave oscillation behavior for nozzles. Thus, for low PR flows dominated by normal shock structure, global instability of the separation zone governs the overall oscillations, whereas higher PR, linked with dominant $\lambda$-foot structure, demonstrates increased feedback from the shear-layer oscillations, separation region breathing, as well as global instabilities. It is envisaged that epistemic understanding related to the spectral dynamics of low-frequency oscillations at different PR values derived from this study could be useful for future nozzle design modifications aimed at achieving optimal nozzle performance. The study could further assist the implementation of appropriate flow control strategies to alleviate these instabilities and improve thrust performance. Full article

This paper highlights recent activities associated with the design of an uninstalled open fan propulsor for next-generation civil aircraft in the high-subsonic flight regime. The concept comprises a transonic propeller–rotor and a subsequent guide vane, which are both subject to pitch-variability in order to account for the strong variations in flight conditions over the entire mission profile. The engine-scale design aimed for high technological maturity and to comply with a high number of industrially relevant requirements to ensure a competitive design, meeting performance requirements in terms of high efficiency levels at cruise and maximum climb conditions, operability in terms of stability margins, good acoustic characteristics, and structural integrity. During the design iterations, rapid 3D-RANS-based optimisations were only used as a conceptual design tool to derive sensitivities, which were used to support and justify major design choices in addition to established relations from propeller theory and common design practice. These design-driven optimisation efforts were complemented with more sophisticated CFD analysis focusing on rotor tip vortex trajectories and resulting in unsteady blade row interaction to optimise the guide vane clipping, as well as investigations of the entire propulsor under angle-of-attack conditions. The resulting open fan design will be the very basis for wind tunnel experiments of a downscaled version at low and high speed. Full article

Transonic/supersonic wind tunnels are indispensable equipment for advanced aircraft to operate across subsonic, transonic, and supersonic regimes. The deformation of the flexible nozzle is the key to accurately controlling the Mach number of transonic wind tunnels. However, solving the deformation of flexible wall plates remains challenging due to the highly nonlinear relationship between wall loading and deformation, as well as the lack of simple yet effective mathematical models under complex boundary conditions. To accurately describe the deformation of flexible wall plates and improve computational efficiency, this study systematically investigates the deformation characteristics of flexible walls in two orthogonal directions and proposes an orthogonal beam function (OBF) model for characterizing small-deflection deformations. For large-deflection deformations in a flexible wall, an elliptic integral (EI) solution is introduced, and the OBF model is correspondingly modified. Experimental validation confirms that the OBF model effectively describes large-deflection deformations in a flexible wall. This research contributes to solving large-deflection deformation in flexible wall plates, enhancing both computational efficiency and accuracy. Full article

During the process of flexible aerial refueling, the flexible structure of the hose drogue assembly is affected by internal and external interference, such as docking maneuvering, deformation of the hose, attitude changes, and body vibrations, causing the hose to swing and the whipping phenomenon, which greatly limits the success rate and safety of aerial refueling operations. Based on a 2.4 m transonic wind tunnel, high-speed wind tunnel test technology of a flexible aerial refueling hose–drogue system was established to carry out experimental research on the coupling characteristics of aerodynamics and multi-body dynamics. Based on the aid of Videogrammetry Model Deformation (VMD), high-speed photography, dynamic balance, and other wind tunnel test technologies, the dynamic characteristics of the hose–drogue system in a high-speed airflow and during the approach of the receiver are obtained. Adopting flexible multi-body dynamics, a dynamic system of the tanker, hose, drogue, and receiver is modeled. The cable/beam model is based on an arbitrary Lagrange–Euler method, and the absolute node coordinate method is used to describe the deformation, movement, and length variation in the hose during both winding and unwinding. The aerodynamic forces of the tanker, receiver, hose, and drogue are modeled, reflecting the coupling influence of movement of the tanker and receiver, the deformation of the hose and drogue, and the aerodynamic forces on each other. The tests show that during the approach of the receiver (distance from 1000 mm to 20 mm), the sinking amount of the drogue increases by 31 mm; due to the offset of the receiver probe, the drogue moves sideways from the symmetric plane of the receiver. Meanwhile, the oscillation magnitude of the drogue increases (from 33 to 48 and from 48 to 80 in spanwise and longitudinal directions, respectively). The simulation results show that the shear force induced by the oscillation of the hose and the propagation velocity of both the longitudinal and shear waves are affected by the hose stiffness and Mach number. The results presented in this work can be of great reference to further increase the safety of aerial refueling. Full article

Dynamic stability derivatives are critical parameters in the design of trajectories and attitude control systems for flight vehicles, as they directly affect the divergence behavior of vibrations in an aircraft’s open-loop system when subjected to disturbances. This study focuses on the estimation of dynamic stability derivatives using a computational fluid dynamics (CFD)-based force oscillation method. A transient Reynolds-averaged Navier–Stokes solver is utilized to compute the time history of aerodynamic moments for an aircraft model oscillating about its center of gravity. The NASA Common Research Model serves as the reference geometry for this investigation, which explores the impact of pitching, rolling, and yawing oscillations on aerodynamic performance. Periodic oscillatory motions are imposed while using a dynamic mesh technique for CFD analysis. Preliminary steady-state simulations are conducted to validate the computational approach, ensuring the reliability and accuracy of the applied CFD model for transonic flow. The primary goal of this research is to confirm the efficacy of CFD in accurately predicting stability derivative values, underscoring its advantages over traditional wind tunnel experiments at high angles of attack. The study highlights the accuracy of CFD predictions and provides detailed insights into how different oscillations affect aerodynamic performance. This approach showcases the potential for significant cost and time savings in the estimation of dynamic stability derivatives. Full article

Recent experience has shown that test results of standard wind tunnel models under off-design conditions could be a useful aid in preparations of some nonstandard wind tunnel tests. However, reference data for such conditions do not exist, or they are scarce. Therefore, off-design transonic wind tunnel tests of the HB-2 standard models were executed in the VTI T-38 wind tunnel as a supplement to the supersonic tests of the same models under design-intent conditions, for which reference results were available. New tests were conducted so that test envelopes partially overlapped with those from available supersonic reference data. Good agreements of results with references were confirmed in the overlapped ranges, so it was assumed that, by implication, the obtained results were also valid in the transonic range of conditions, with an observation that the effects of sting diameter were much more pronounced in the transonic range than in the supersonic one. HB-2 models were tested in two sizes, using two different wind tunnel balances for each model, so that the results can be used with more confidence. Full article

Large transport aircraft tend to adopt a wing layout with a high aspect ratio and swept-back angle due to the requirement of a high lift-to-drag ratio. Composite material is typically employed to ensure the light weight of the structure, causing serious static aeroelasticity problems to the aircraft. When the airplane is flying in the transonic region, its aerodynamic load is very complex, and the large load leads to large deformation of the wing, triggering geometric nonlinear effects, which further affects the static aerodynamic elasticity characteristics of the wing. In this study, in order to study the static aeroelastic characteristics of the transonic flow of a high-aspect-ratio airfoil, a new design method of the scaled similar optimization model is described, and the change in the model lift coefficient due to geometrically nonlinear static aeroelasticity effects when the angle of attack is changed was investigated by using simulation and wind tunnel test methods. In order to ensure the accuracy of the wing shape when the model was deformed greatly, this study employed the structural design scheme of the wing with the skin as the main stiffness component, and the thicknesses of different regions of the skin were used as the design variables for the stiffness optimization design. The engineering algorithm of nonlinear finite elements was used in this study to calculate the curve of lift with the angle of attack considering the geometric nonlinear static aeroelasticity effect. The results show that the similarity optimization process employed in this study can be used to complete the design of the high-speed aerostatic wing test model, and the wind tunnel test results show that geometric nonlinearity has a large impact on the lift coefficient of the wing. Full article

Wind tunnel testing is a crucial method for studying aircraft flutter. Using heavy gas as the wind tunnel medium can mitigate the escalating issue of test models being overweight as advanced aircraft develop. This paper employs an analytical method for numerical calculations of three-dimensional (3D) wing flutter based on fluid–structure interaction (FSI). Flutter calculations for the Goland wing are conducted, and the results in the air medium are consistent with the literature. In contrast, significant differences in flutter behavior are observed in the heavy gas R134a medium. Compared to air, when the model reaches a critical state in R134a, the incoming flow velocity is lower, the incoming flow density is approximately 3 to 5 times air, and the incoming flow dynamic pressure is about 1.1 to 1.2 times that of air. The correction of heavy gas flutter data is crucial for wind tunnel testing. This paper proposes a correction method based on the unsteady transonic flow similarity law proposed by Bendiksen under quasi-steady conditions. Attempts are made to revise relevant published wind tunnel tests and heavy gas flutter calculation results. The transonic flutter similarity law effectively explains the flutter similarity of rigid models in both heavy gas and air media. Still, it fails in cases with highly reduced frequencies and low mass ratios, such as those encountered with flexible wings. Full article

To understand the asymmetric flow of a slender body with low-aspect ratio fins, a wind tunnel experiment was carried out, and the asymmetric flow was observed when the pair of fins had a symmetric deflection angle of 30° at a small angle of attack and zero sideslip angle at transonic speeds. The unsteady characteristics of flow around the moving fins, especially for the evolution of the asymmetric flow, was carefully numerically investigated via the RANS method. To verify the numerical method, the experimental steady wind tunnel data of the NACA 0012 airfoil with sinusoidal pitching motion were adopted. A hysteresis loop exists as a function of the deflection angle during the upstroke and downstroke motions. The side force is periodic due to the asymmetric flow peaks at the downstroke and their peak value appeared at around δz = 25°, which was independent of the deflection frequency. As the deflection frequency increased, the asymmetric flow formed at a higher deflection angle during the upstroke motion, but decayed at a lower deflection angle during the downstroke motion, resulting in a more significant unsteady hysteresis effect. Full article

A small-scale supersonic flight experiment vehicle named OWASHI is being developed at Muroran Institute of Technology as a flying testbed for verification of innovative technologies for high-speed atmospheric flights. Drag reduction in the transonic and supersonic regimes is quite crucial for attainability of its supersonic flights. This study aims to obtain configuration modification for transonic drag reduction on the basis of the so-called area rule. In order to prevent accumulation of compression waves, various profiles of the bottleneck and the bulge are designed by using arcs with constant and large radii and spline curves approximating them. Their effects are assessed through CFD analysis, wind tunnel tests, and wave drag analysis. As a result, an area-rule-based configuration with a sharpened conical nose and a large-radius bottleneck achieves significant drag reduction in a transonic Mach range, as well as 57-count (57 × 10⁻⁴) reduction at the design Mach number of 1.1. However, the drag reduction effects of bulges are small and apparent only in a narrow Mach range. On the other hand, in the practical vehicle configuration, rearward fuselage extension shows a large amount of drag reduction, whereas the addition of an intake cancels the drag reduction effects of area-rule-based configurations. Full article