Search Results (67)

Transparent conductive aluminum-doped zinc oxide (AZO) films were investigated as potential recombination layers for perovskite/silicon tandem solar cells, comparing the results of atomic layer deposition (ALD) and magnetron sputtering (MS) on vertically aligned silicon nanowire (SiNW) scaffolds. Conformality and thickness control were examined by cross-sectional SEM/TEM and profilometry, revealing fully conformal ALD coatings with tunable thicknesses (40–120 nm) versus tip-capped, semi-uniform MS films (100–120 nm). Optical transmission measurements on glass substrates showed that both 120 nm ALD and MS layers exhibit interference maxima near 450–500 nm and 72–89% transmission across 800–1200 nm; the thinnest ALD films reached up to 86% near-IR transparency. Four-point probe analysis demonstrated that ALD reduces surface resistance from 1150 Ω/□ at 40 nm to 245 Ω/□ at 120 nm, while MS layers achieved 317 Ω/□ at 120 nm. These results delineate the balance between conformality, transparency, and conductivity, providing design guidelines for AZO recombination interfaces in next-generation tandem photovoltaics. Full article

The recent focus on wide-bandgap absorbers for tandem solar cell configurations and photovoltaic materials with high absorption coefficients for indoor photovoltaics has prompted a renewed interest in selenium. Over the past few years, the efficiency of Se solar cells has improved significantly, bringing the prospect of industrial production closer to reality. This study presents an innovative vapor transport deposition (VTD) technique for the scalable and cost-effective fabrication of Se thin films. The prepared Se thin films were characterized, and the results show that the VTD method is capable of producing dense and well-crystallized Se thin films. Se solar cells with a structure of glass/FTO/TiO₂/Se/Au were fabricated to evaluate the impact of substrate temperature on device performance. The optimal performance was achieved on the hot side of the substrate during deposition, with a power conversion efficiency (PCE) of 2.56%. This study provides a promising pathway for the low-cost, high-throughput manufacturing of high-performance Se solar cells, facilitating their potential industrial implementation. Full article

Perovskite/organic tandem solar cells, as a next-generation high-efficiency photovoltaic technology, integrate the tunable bandgap characteristics of perovskite materials with the broad spectral absorption advantages of organic semiconductors, demonstrating remarkable potential to surpass the theoretical efficiency limits of single-junction cells, enhance device stability, and expand application scenarios. This architecture supports low-temperature solution processing and offers tunable bandgaps, lightweight flexibility, and ecofriendly advantages. This review systematically summarizes research progress in this field, with a primary focus on analyzing the working principles, performance optimization strategies, and key challenges of the technology. Firstly, the article discusses strategies such as defect passivation, crystallization control, and suppression of phase separation in wide-bandgap perovskite sub-cells, offering insights into mitigating open-circuit voltage losses. Secondly, for the narrow-bandgap organic sub-cells, this paper highlights the optimization strategies for both the active layer and interfacial layers, aiming to improve spectral utilization and enhance power conversion efficiency. Additionally, this paper emphasizes the optimization of optical transparency, electrical conductivity, and energy level alignment in the recombination layer, providing theoretical guidance for efficient current matching and carrier transport. Full article

All-perovskite tandem solar cells (APTSCs) offer a promising pathway to surpassing the efficiency limits of single-junction photovoltaics. The wide-bandgap (WBG) subcell, serving as the top absorber, plays a critical role in optimizing light harvesting and charge extraction in tandem architectures. This review comprehensively summarizes recent advancements in WBG subcells, focusing on material design, defect passivation strategies, and interfacial engineering to address challenges such as phase instability, halide segregation, and voltage losses. Key innovations, including compositional tuning, additive engineering, and charge transport layer optimization, are critically analyzed for their contributions to efficiency and stability enhancement. Despite significant progress, challenges remain regarding scalability, long-term stability under illumination, and cost-effective fabrication. Future research directions include the development of lead-reduced perovskites, machine learning-guided material discovery, and scalable deposition techniques. This review provides insights into advancing WBG subcells toward high-efficiency, stable, and eco-friendly APTSCs for next-generation solar energy applications. Full article

Modern multi-junction solar cell technology offers a pathway to achieving consistent and high photovoltaic conversion efficiencies through enhanced solar spectrum absorption. Indeed, during the last years, the industries of solar cells have focused on optimizing device structures, utilizing both robust and delicate materials to maximize their performances. This paper presents the modeling and optimization of the electrical and structural properties of high-efficiency InGaP/GaAs double-junction solar cells, specifically without employing an anti-reflective coating. This developed structure has been achieved by introducing a buffer layer in the lower layer and incorporating an upper back surface field layer into the investigated cell structure. Furthermore, the optimization conducted in this paper using Silvaco-Atlas software (version 2018) under the AM1.5G spectrum reveals that the proposed InGaP/GaAs tandem cell configuration exhibits significant performance, reaching conversion efficiency of 41.585%. It can be said that this adapted structure yields a short-circuit current density of 21.65 mA/cm², an open-circuit voltage of 2.319 V, and a filling factor of 84.001%. Whereas this newly optimized structure demonstrates its effectiveness in enhancing solar cell efficiency performance, presenting highly promising results with potential significance for the devices’ optical and electrical properties. Full article

PSS (Photovoltaic Solar Systems) are a key technology in energy transition, and their efficiency depends on multiple interrelated factors. This study uses a systematic review based on the PRISMA methodology to identify four main categories affecting performance: technological, environmental, design and installation, and operational factors. Notably, technological advances in materials such as perovskites and emerging technologies like tandem and bifacial cells significantly enhance conversion efficiency, fostering optimism in the field. Environmental factors, including solar radiation, temperature, and contaminants, also substantially impact system performance. Design and installation play a crucial role, particularly in panel orientation, solar tracking systems, and the optimization of electrical configurations. Maintenance, material degradation, and advanced monitoring systems are essential for sustaining efficiency over time. This study provides a comprehensive understanding of the field by reviewing 113 articles and analyzing three key areas—materials, application of sizing technologies, and optimization—from 2018 to 2025. The paper also explores emerging trends, such as the development of energy storage systems and the integration of smart grids, which hold promise for enhancing photovoltaic module (PM) performance. The findings highlight the importance of integrating technological innovation, design strategies, and effective operational management to maximize the potential of PM systems, providing a solid foundation for future research and applications across residential, industrial, and large-scale contexts. Full article

Energy harvesting technology allows Internet of Things (IoT) devices to be powered continuously without needing battery charging or replacement. In addressing existing and emerging massive IoT energy supply challenges, this paper presents the design of multi-sourced multiple input and multiple output (MIMO) multiband hybrid wireless RF-perovskite photovoltaic energy harvesting subsystems for IoT application. The research findings evaluate the efficiency and power output of different RF configurations (1 to 16 antennas) within MIMO RF subsystems. A Delon quadruple rectifier in the RF energy harvesting system demonstrates a system-level power conversion efficiency of 51%. The research also explores the I-V and P-V characteristics of the adopted perovskite tandem cell. This results in an impressive array capable of producing 6.4 V and generating a maximum power of 650 mW. For the first time, the combined mathematical modelling of the system architecture is presented. The achieved efficiency of the combined system is 90% (for 8 MIMO) and 98% (for 16 MIMO) at 0 dBm input RF power. This novel study holds great promise for next-generation 5G/6G smart IoT passive electronics. Additionally, it establishes the hybrid RF-perovskite energy harvester as a promising, compact, and eco-friendly solution for efficiently powering IoT devices in smart cities. This work contributes to the development of sustainable, scalable, and smart energy solutions for IoT integration into smart city infrastructures. Full article

The integration of perovskite with silicon for constructing tandem solar cells (TSCs) represents a promising route in photovoltaic technology. The hybrid sequential deposition (HSD) method, combining thermal evaporation and spin-coating, is crucial for developing perovskite films in textured perovskite/silicon tandem solar cells. However, the process faces challenges due to incomplete reactions caused by the dense perovskite coverage layer (CPCL) formed from high-crystallinity precursors. The CPCL hinders the diffusion of organic salts into the bottom precursor layer, leading to performance degradation and accelerated device aging. Herein, this study explores several polar solvents as additives to n-butanol (nBA) solvent in order to enhance the permeability of organic salts through the CPCL, and we demonstrate that dimethyl sulfoxide (DMSO) as an additive solvent can effectively assist organic salts in rapidly diffusing through the precursor layer, thereby promoting the complete transformation of uniform perovskite crystals. The resulting perovskite films exhibited complete conversion, uniform crystallization, and improved quality. As a result, the target TSCs achieved an increased maximum power conversion efficiency (PCE) of 29.12%. This study offers a robust pathway for depositing high-quality perovskite films on industrial-grade textured silicon substrates, laying a solid foundation for advancing perovskite/silicon tandem solar cells technology. Full article

Phenothiazine-based photosensitizers bear the intrinsic potential to substitute various expensive organometallic dyes owing to the strong electron-donating nature of the former. If coupled with a strong acceptor unit and the length of N-alkyl chain is appropriately chosen, they can easily produce high efficiency levels in dye-sensitized solar cells. Here, three novel D-A dyes containing 1H-tetrazole-5-acrylic acid as an acceptor were synthesized by varying the N-alkyl chain length at its phenothiazine core and were exploited in dye-sensitized solar cells. Differential scanning calorimetry showed that the synthesized phenothiazine derivatives exhibited behavior characteristic of molecular glasses, with glass transition and melting temperatures in the range of 42–91 and 165–198 °C, respectively. Based on cyclic and differential pulse voltammetry measurements, it was evident that their lowest unoccupied molecular orbital (LUMO) (−3.01–−3.14 eV) and highest occupied molecular orbital (HOMO) (−5.28–−5.33 eV) values were fitted to the TiO₂ conduction band and the redox energy of I⁻/I₃⁻ in electrolyte, respectively. The experimental results were supported by density functional theory, which was also utilized for estimation of the adsorption energy of the dyes on the TiO₂ and its size. Finally, the compounds were tested in dye-sensitized solar cells, which were characterized based on current–voltage measurements. Additionally, for the compound giving the best photovoltaic response, the efficiency of the DSSCs was optimized by a photoanode modification involving the use of cosensitization and coadsorption approaches and the introduction of a blocking layer. Subsequently, two types of tandem dye-sensitized solar cells were constructed, which resulted in an increase in photovoltaic efficiency to 6.37%, as compared to DSSCs before modifications, with a power conversion value of 2.50%. Full article

The integration of perovskite materials in solar cells has garnered significant attention due to their exceptional photovoltaic properties. However, achieving a bandgap energy below 1.2 eV remains challenging, particularly for applications requiring infrared absorption, such as sub-cells in tandem solar cells and single-junction perovskite solar cells. In this study, we employed a doping strategy to engineer the bandgap and observed that the doping effects varied depending on the A-site cation. Specifically, we investigated the impact of bismuth (Bi³⁺) incorporation into perovskites with different A-site cations, such as cesium (Cs) and methylammonium (MA). Remarkably, Bi³⁺ doping in MA-based tin-lead perovskites enabled the fabrication of ultra-narrow bandgap films (~1 eV). Comprehensive characterization, including structural, optical, and electronic analyses, was conducted to elucidate the effects of Bi doping. Notably, 8% Bi-doped Sn-Pb perovskites demonstrated infrared absorption extending up to 1360 nm, an unprecedented range for ABX₃-type single halide perovskites. This work provides valuable insights into further narrowing the bandgap of halide perovskite materials, which is essential for their effective use in multi-junction tandem solar cell architectures. Full article

Historically, multi-junction solar cells have evolved to capture a broader spectrum of sunlight, significantly enhancing efficiency beyond conventional solar technologies. In this study, we utilized Silvaco TCAD tools to optimize a five-junction solar cell composed of AlInP, AlGaInP, AlGaInAs, GaInP, GaAs, InGaAs, and Ge, drawing on advancements documented in the literature. Our research focused on optimizing these cells through sophisticated statistical modeling and material innovation, particularly examining the relationship between layer thickness and electrical yield under one sun illumination. Employing III-V tandem solar cells, renowned for their superior efficiency in converting sunlight to electricity, we applied advanced statistical models to a reference solar cell configured with predefined layer thicknesses. Our analysis revealed significant positive correlations between layer thickness and electrical performance, with correlation coefficients (R² values) impressively ranging from 0.86 to 0.96 across different regions. This detailed statistical insight led to an improvement in overall cell efficiency to 44.2. A key innovation in our approach was replacing the traditional germanium (Ge) substrate with Copper Indium Gallium Selenide (CIGS), known for its adjustable bandgap and superior absorption of long-wavelength photons. This strategic modification not only broadened the absorption spectrum but also elevated the overall cell efficiency to 47%. Additionally, the optimization process involved simulations using predictive profilers and Silvaco Atlas tools, which systematically assessed various configurations for their spectral absorption and current–voltage characteristics, further enhancing the cell’s performance. These findings underscore the critical role of precise material engineering and sophisticated statistical analyses in advancing solar cell technology, setting new efficiency benchmarks, and driving further developments in the field. Full article

Wide-bandgap (WBG) perovskite has demonstrated great potential in perovskite-based tandem solar cells. The power conversion efficiency (PCE) of such devices has surpassed 34%, signifying a new era for renewable energy development. However, the ion migration reduces the stability and hinders the commercialization, which is yet to be resolved despite many attempts. A big step forward has now been achieved by the simulation method. The detailed thermodynamics and kinetics of the migration process have been revealed for the first time. The stability has been enhanced by more than 100% via the heterojunction layer on top of the WBG perovskite film, which provided extra bonding for kinetic protection. Hopefully, these discoveries will open a new gate for WBG perovskite research and accelerate the application of perovskite-based tandem solar cells. Full article

This study investigates how differences in energy-related properties of cities influence the composition of a cost-efficient urban energy system, assuming electrification of the transport and industry sectors and zero-emission of CO₂. These differences are evaluated for two scenarios regarding the capacities of the modeled cities to import electricity. A linear optimization model that encompasses the electricity, heating, industry, and transport sectors, using measured data from six cities in Sweden, is applied. Results show that when strict constraints on electricity imports are enforced, cities with a lower ratio of annual electricity demand for heat encourage the implementation of power-to-heat solutions in the heating sector. This study also reveals that under such stringent electricity import conditions, cities with a high level of flexibility in electricity demand favor a combination of batteries and solar photovoltaics as opposed to biomass-based electricity production. Conversely, when electricity importation is less restricted and biomass prices surpass 20 EUR/MWh, local electricity generation is outcompeted by imports, and large-scale heat pumps working in tandem with thermal energy storage dominate the heating sector in all modeled cities. This assertion holds true when the maximum electricity import capacity is utilized up to 5000 h annually. Full article

Materials engineering based on metal oxides for manipulating the solar spectrum and producing solar energy have been under intense investigation over the last years. In this work, we present NiO thin films double doped with niobium (Nb) and nitrogen (N) as cation and anion dopants (NiO:(Nb,N)) to be used as p-type layers in all oxide transparent solar cells. The films were grown by sputtering a composite Ni-Nb target on room-temperature substrates in plasma containing 50% Ar, 25% O₂, and 25% N₂gases. The existence of Nb and N dopants in the NiO structure was confirmed by the Energy Dispersive X-Ray and X-Ray Photoelectron Spectroscopy techniques. The nominally undoped NiO film, which was deposited by sputtering a Ni target and used as the reference film, was oxygen-rich, single-phase cubic NiO, having a visible transmittance of less than 20%. Upon double doping with Nb and N the visible transmittance of NiO:(Nb,N) film increased to 60%, which was further improved after thermal treatment to around 85%. The respective values of the direct band gap in the undoped and double-doped films were 3.28 eV and 3.73 eV just after deposition, and 3.67 eV and 3.76 eV after thermal treatment. The changes in the properties of the films such as structural disorder, direct and indirect energy band gaps, Urbach tail states, and resistivity were correlated with the incorporation of Nb and N in their structure. The thermally treated NiO:(Nb,N) film was used to form a diode with a spin-coated two-layer, mesoporous on top of a compact, TiO₂ film. The NiO:(Nb,N)/TiO₂heterojunction exhibited visible transparency of around 80%, showed rectifying characteristics and the diode’s parameters were deduced using the I-V method. The diode revealed photovoltaic behavior upon illumination with UV light exhibiting a short circuit current density of 0.2 mA/cm² and open-circuit voltage of 500 mV. Improvements of the output characteristics of the NiO:(Nb,N)/TiO₂ UV-photovoltaic by proper engineering of the individual layers and device processing procedures are addressed. Transparent NiO:(Nb,N) films can be potential candidates in all-oxide ultraviolet photovoltaics for tandem solar cells, smart windows, and other optoelectronic devices. Full article

Dye-sensitized solar cells with synthesized phenothiazine derivative 3,7′-bis(2-cyano-1-acrylic acid)-10-ethyl-phenothiazine (PTZ) and commercial di-tetrabutylammonium cis-bis(isothiocyanato)bis(2,2′-bipyridyl-4,4′-dicarboxylato)ruthenium(II) (N719) dyes were fabricated and characterized based on current–voltage measurements. The effect of the utilization of individual dyes and its mixture, chenodeoxycholic acid as co-adsorbent addition, replacement of I⁻/I₃⁻ by Co^2+/3+ ions in electrolyte and platinum by semiconducting polymer mixture poly(3,4-ethylenedioxythiophene) polystyrene sulfonate in counter electrode was studied. Additionally, the effect of polymer thickness on the photovoltaic performance of the device was evaluated. Prepared photoanodes were characterized by UV–Vis spectroscopy and atomic force microscopy. The further modification of DSSCs involving the fabrication of tandem solar cells was carried out. The higher power conversion efficiency 7.60% exhibited tandem photovoltaic cell sensitized with dyes mixture containing co-adsorbent, I⁻/I₃⁻ ions in the electrolyte, and platinum in the electrode. Full article