Search Results (50)

Laser-driven ion acceleration in dense, hydrogen-rich media can be significantly enhanced by embedding metallic nanoantennas that support localized surface plasmon (LSP) resonances. Using large-scale particle-in-cell (PIC) simulations with the EPOCH code, we investigate how nanoantenna geometry and laser pulse parameters influence proton acceleration in gold-doped polymer targets. The study covers dipole, crossed, and advanced 3D-cross antenna configurations under laser intensities of 10¹⁷–10¹⁹ W/cm² and pulse durations from 2.5 to 500 fs, corresponding to experimental conditions at the ELI laser facility. Results show that the dipole antennas exhibit resonance-limited proton energies of ~0.12 MeV, with optimal acceleration at the intensities 4 × 10¹⁷–1 × 10¹⁸ W/cm² and pulse durations around 100–150 fs. This energy is higher by roughly three orders of magnitude than the proton energy for the same field and same polymer without dopes: ~1–2 × 10⁻⁴ MeV. Crossed antennas achieve higher energies (~0.2 MeV) due to dual-mode plasmonic coupling that sustains local fields longer. Advanced 3D and Yagi-like geometries further enhance field localization, yielding proton energies up to 0.4 MeV and larger high-energy proton populations. For dipole antennas, experimental data from ELI exists and our results agree with it. We find that moderate pulses preserve plasmonic resonance for longer and improve energy transfer efficiency, while overly intense pulses disrupt the resonance early. These findings reveal that plasmonic field enhancement and its lifetime govern energy transfer efficiency in laser–matter interaction. Crossed and 3D geometries with optimized spacing enable multimode resonance and sequential proton acceleration, overcoming the saturation limitations of simple dipoles. The results establish clear design principles for tailoring nanoantenna geometry and pulse characteristics to optimize compact, high-energy proton sources for inertial confinement fusion and high-energy-density applications. Full article

This letter presents a high-gain frequency-controlled beam-scanning antenna specifically designed for through-wall radar (TWR) applications in the W band. The antenna leverages the leaky-wave radiation generated by spoof surface plasmon polaritons (SSPPs) propagating on sinusoidally modulated reactance surfaces (SMRS). Periodically arranged quasi-H-shaped metallic cells are employed to achieve beam scanning. The integration of a flared structure at the apex of the designed SSPP antenna results in a significant gain enhancement, yielding an approximate increase of 10 dB. From 92.8 to 97.6 GHz, the antenna exhibits a reflection coefficient of |S11| < −10 dB, provides a high scanning rate of 4.05°/%, and achieves a realized gain of 20.9 dBi. This design eliminates the necessity for mechanical rotators and phase shifters that are typical in traditional TWR systems, significantly reducing system complexity and cost. A vehicle-mounted W-band TWR system was developed, integrating the designed SSPP antenna and employing linear frequency modulation technology to emit millimeter-wave signals for electronic scanning detection. With an economical and efficient design approach, testing has demonstrated that the system can perform through-wall imaging at a distance of 10 m, both in stationary and in motion conditions. Full article

This paper presents a carbon monoxide (CO) detection mechanism achieved through further improvement of the sensing antenna based on hybrid spoof localized surface plasmons (SLSPs) and cavity resonance. Unlike conventional approaches relying on chemical reactions or photoelectric effects, the all-metal configuration detects dielectric variations through microwave-regime resonance frequency shifts, enabling CO/air differentiation with theoretically enhanced robustness and environmental adaptability. The designed system achieves measured figures of merit (FoMs) of 183.2 RIU⁻¹, resolving gases with dielectric contrast below 0.1%. Experimental validation successfully discriminated CO (ε_r = 1.00262) from air (ε_r = 1.00054) under standard atmospheric pressure at 18 °C. Full article

This paper introduces a novel miniaturized, four-mode, semi-flexible leaky wave Multiple-Input Multiple-Output (MIMO) antenna specifically designed to advance vehicular communication systems. The proposed antenna addresses key challenges in 5G low- and high-frequency bands, including millimeter-wave communication, by integrating innovative features such as a periodic Spoof Surface Plasmon Polariton Transmission Line (SSPP-TL) and logarithmic-spiral-like semi-circular strip patches parasitically fed via orthogonal ports. These design elements facilitate stable impedance matching and wide impedance bandwidths across operating bands, which is essential for vehicular networks. The hybrid combination of leaky wave and SSPP structures, along with a defected wide-slot ground structure and backside meander lines, enhances radiation characteristics by reducing back and bidirectional radiation. Additionally, a naturalization network incorporating chamfered-edge meander lines minimizes mutual coupling and introduces a fourth radiation mode at 80 GHz. Compact in size (14 × 12 × 0.25 mm³), the antenna achieves high-performance metrics, including S11 < −18.34 dB, dual-polarization, peak directive gains of 11.6 dBi (free space) and 14.6 dBi (on vehicles), isolation > 27 dB, Channel Capacity Loss (CCL) < 3, Envelope Correlation Coefficient (ECC) < 0.001, axial ratio < 2.25, and diversity gain (DG) > 9.85 dB. Extensive testing across various vehicular scenarios confirms the antenna’s robustness for Vehicle-to-Vehicle (V2V), Vehicle-to-Pedestrian (V2P), and Vehicle-to-Infrastructure (V2I) communication. Its exceptional performance ensures seamless connectivity with mobile networks and enhances safety through Specific Absorption Rate (SAR) compliance. This compact, high-performance antenna is a transformative solution for connected and autonomous vehicles, addressing critical challenges in modern automotive communication networks and paving the way for reliable and efficient vehicular communication systems. Full article

This study investigates the use of spoof surface plasmon polaritons (SSPPs) as an effective feeding mechanism for antennas functioning within the extremely high-frequency (EHF) range. A novel method is proposed for feeding a dielectric rod antenna with SSPPs, featuring a simple design made from FR-4 material with a relative permittivity of 4.3. In contrast to traditional tapered dielectric rod antennas and their feeding configurations, this design shows promise for achieving a gain of up to 16.85 dBi with an antenna length of 7.6 λ₀. By carefully optimizing the design, impedance matching and directional radiation characteristics were obtained at 7.3 GHz. Simulations were conducted using CST Microwave Studio to validate and evaluate the design’s performance. The enhanced gain, improved impedance bandwidth, and use of cost-effective materials such as FR-4 present a compelling case for adopting this design in future wireless communication technologies. Additionally, the remote sensing properties of the feeder can be utilized for concealed object detection, material characterization, and the analysis of the spectral properties of materials. Full article

In this manuscript, we present in detail the design and implementation of the hardware and software to produce a standalone wireless sensor node, called SensorQ system, for the detection of a toxic chemical agent. The proposed wireless sensor node prototype is composed of a micro-controller unit (MCU), a radio frequency (RF) transceiver, a dual-band antenna, a rechargeable battery, a voltage regulator, and four integrated sensing devices, all of them integrated in a package with final dimensions and weight of 200 × 80 × 60 mm and 0.422 kg, respectively. The proposed SensorQ prototype operates using the Long-Range (LoRa) wireless communication protocol at 2.4 GHz, with a sensor head implemented on a hetero-core fiber optic structure supporting the surface plasmon resonance (SPR) phenomenon with a sensing section (L = 10 mm) coated with titanium/gold/titanium and a chemically sensitive material (zinc oxide) for the detection of Di-Methyl Methyl Phosphonate (DMMP) vapor in the air, a simulant of the toxic nerve agent Sarin. The transmitted spectra with respect to different concentrations of DMMP vapor in the air were recorded, and then the transmitted power for these concentrations was calculated at a wavelength of 750 nm. The experimental results indicate the feasibility of detecting DMMP vapor in air using the proposed optical sensor head, with DMMP concentrations in the air of 10, 150, and 150 ppm in this proof of concept. We expect that the sensor and wireless sensor node presented herein are promising candidates for integration into a wireless sensor network (WSN) for chemical warfare agent (CWA) detection and contaminated site monitoring without exposure of armed forces. Full article

This comprehensive article explores the massive MIMO (M-MIMO) design and its associated concepts, focusing on the seamless integration requirements for Beyond 5G (B5G) and 6G networks. Addressing critical aspects such as RF chain reduction, pilot contamination, cell-free MIMO, and security considerations, this article delves into the intricacies of M-MIMO in the evolving landscape of B5G. Moreover, the emerging MIMO concepts in this article include AI-enabled M-MIMO three-dimensional beamforming, reconfigurable intelligent surfaces, visible light communication, and THz spectrum utilization. This review highlights the challenges and open research issues, including Narrow Aperture Antenna Nodes, Plasmonic Antenna Arrays, Integrated Sensing with M-MIMO, and the application of federated learning in M-MIMO systems. By examining these cutting-edge developments, this article aims to advance knowledge in the field and inspire future research directions in the exciting realm of B5G and 6G networks. Full article

Current optical tweezering techniques are actively employed in the manipulation of nanoparticles, e.g., biomedical cells. However, there is still huge room for improving the efficiency of manipulating multiple nanoparticles of the same composition but different shapes. In this study, we designed an array of high-index all-dielectric disk antennas, each with an asymmetric open slot for such applications. Compared with the plasmonic counterparts, this all-dielectric metasurface has no dissipation loss and, thus, circumvents the Joule heating problem of plasmonic antennas. Furthermore, the asymmetry-induced excitation of quasi-bound states in continuum (QBIC) mode with a low-power intensity (1 mW/µm²) incidence imposes an optical gradient force of −0.31 pN on 8 nm radius nanospheres, which is four orders of magnitude stronger than that provided by the Fano resonance in plasmonic antenna arrays, and three orders of magnitude stronger than that by the Mie resonance in the same metasurface without any slot, respectively. This asymmetry also leads to the generation of large optical moments. At the QBIC resonance wavelength, a value of 88.3 pN-nm will act on the nanorods to generate a rotational force along the direction within the disk surface but perpendicular to the slot. This will allow only nanospheres but prevent the nanorods from accurately entering into the slots, realizing effective sieving between the nanoparticles of the two shapes. Full article

Recent advancements in terahertz (THz) wave technology have highlighted the criticality of circular-polarization detection, fostering the development of more compact, efficient on-chip THz circular-polarization detectors. In response to this technological imperative, we presented a chiral-antenna-integrated GaAs/AlGaAs quantum well (QW) THz detector. The chiral antenna selectively couples the incident light of a specific circular-polarization state into a surface-plasmon polariton wave that enhances the absorptance of the QWs by a factor of 12 relative to a standard 45° faceted device, and reflects a significant amount of the incident light of the orthogonal circular-polarization state. The circular-polarization selectivity is further enhanced by the QWs with a strong intrinsic anisotropy, resulting in a circular-polarization extinction ratio (CPER) as high as 26 at 6.52 THz. In addition, the operation band of the device can be adjusted by tuning the structural parameters of the chiral structure. Moreover, the device preserves a high performance for oblique incidence within a range of ±5°, and the device architecture is compatible with a focal plane array. This report communicates a promising approach for the development of miniaturized on-chip THz circular-polarization detectors. Full article

Point-of-care (POC) diagnostic platforms are globally employed in modern smart technologies to detect events or changes in the analyte concentration and provide qualitative and quantitative information in biosensing. Surface plasmon-coupled emission (SPCE) technology has emerged as an effective POC diagnostic tool for developing robust biosensing frameworks. The simplicity, robustness and relevance of the technology has attracted researchers in physical, chemical and biological milieu on account of its unique attributes such as high specificity, sensitivity, low background noise, highly polarized, sharply directional, excellent spectral resolution capabilities. In the past decade, numerous nano-fabrication methods have been developed for augmenting the performance of the conventional SPCE technology. Among them the utility of plasmonic gold nanoparticles (AuNPs) has enabled the demonstration of plethora of reliable biosensing platforms. Here, we review the nano-engineering and biosensing applications of AuNPs based on the shape, hollow morphology, metal–dielectric, nano-assembly and heterometallic nanohybrids under optical as well as biosensing competencies. The current review emphasizes the recent past and evaluates the latest advancements in the field to comprehend the futuristic scope and perspectives of exploiting Au nano-antennas for plasmonic hotspot generation in SPCE technology. Full article

In this paper, we present a scheme for generating terahertz (THz) radiation using an array of parallel double-walled carbon nanotubes (DWCNTs) subjected to a direct current (DC). The longitudinal surface plasmon polaritons (SPPs) in the DWCNTs are coherently excited by two near-infrared laser beams with slightly different frequencies. Through numerical methods, we investigate the spectral characteristics of the SPPs in the presence of a DC current in the nanotubes. We identify high-quality plasmonic modes with a slowdown factor exceeding 300 in the terahertz frequency region. The amplification of these slow SPP modes is facilitated by the DC current in the DWCNTs, fulfilling a synchronism condition. This condition ensures that the phase velocity of the SPPs is closely matched to the drift velocity of the charge carriers, allowing for an efficient energy exchange between the current and the surface electromagnetic wave. The high-frequency currents on the nanotube walls in the DWCNT array enable the emission of THz radiation into the far field, owing to an antenna effect. Full article

We have theoretically investigated the spatial-temporal dynamics of extraordinary optical transmission (EOT) through a two-slit plasmonic antenna under femtosecond laser dual-beam irradiation. The dynamic interference of the crossed femtosecond laser dual-beam with the transiently excited surface plasmon polariton waves are proposed to characterize the particular spatial-temporal evolutions of EOT. It is revealed that the dynamic EOT can be flexibly switched with tunable symmetry through the respective slit of a two-slit plasmonic antenna by manipulating the phase correlation of the crossed femtosecond laser dual-beam. This is explained as tunable interference dynamics by phase control of surface plasmon polariton waves, allowing the dynamic modulation of EOT at optimized oblique incidences of dual-beams. Furthermore, we have obtained the unobserved traits of symmetry-broken transient spectra of EOT from the respective up- and down-slit of the antenna under crossed femtosecond laser dual-beam irradiation. This study can provide fundamental insights into the ultrafast dynamics of EOT in two-slit plasmonic antennas, which can be helpful to advance a wide range of applications, such as ultrafast plasmonic switch, ultrahigh resolution imaging, the transient amplification of non-linear effects, etc. Full article

In this manuscript, a reconfigurable leaky wave antenna is proposed with linearly polarized and circularly polarized properties, which is composed of two layers with feeding waveguide and radiation elements. The bottom layer is a half-mode substrate integrated waveguide etched with a spoof surface plasmon polaritons structure as a high-dispersion feeding waveguide to excite 8 circular patches as radiation elements in the top layer. In a unit element, the horizontal linear polarization (HLP) and right-hand circular polarization (RHCP) radiation are switched using a p-i-n diode crossing a slot of a circular metal patch. HLP performance is achieved as the p-i-n diode is switched off, and RHCP is achieved as the p-i-n diode is switched on. The measured results verify the design theory and the simulated results. Over the working band of 10.4~12.8 GHz, the proposed antenna can radiate scanning beams covering about a 73° region, including the broadside direction with HLP and RHCP. Full article

A fixed-frequency beam-scanning leaky-wave antenna (LWA) array with three switchable dual-polarized beams is proposed and experimentally demonstrated. The proposed LWA array consists of three groups of spoof surface plasmon polaritons (SPPs) LWAs with different modulation period lengths and a control circuit. Each group of SPPs LWAs can independently control the beam steering at a fixed frequency by loading varactor diodes. The proposed antenna can be configured in both multi-beam mode and single-beam mode, where the multi-beam mode with optional two or three dual-polarized beams. The beam width can be flexibly adjusted from narrow to wide by switching between multi-beam and single-beam states. The prototype of the proposed LWA array is fabricated and measured, and both simulation and experimental results show that the antenna can accomplish a fixed frequency beam scanning at an operating frequency of 3.3 to 3.8 GHz with a maximum scanning range of about 35° in multi-beam mode and about 55° in single-beam mode. It could be a promising candidate for application in the space–air–ground integrated network scenario in satellite communication and future 6G communication systems. Full article

Plasmonic nanostructures ensure the reception and harvesting of visible lights for novel photonic applications. In this area, plasmonic crystalline nanodomains decorated on the surface of two-dimensional (2D) semiconductor materials represent a new class of hybrid nanostructures. These plasmonic nanodomains activate supplementary mechanisms at material heterointerfaces, enabling the transfer of photogenerated charge carriers from plasmonic antennae into adjacent 2D semiconductors and therefore activate a wide range of visible-light assisted applications. Here, the controlled growth of crystalline plasmonic nanodomains on 2D Ga₂O₃ nanosheets was achieved by sonochemical-assisted synthesis. In this technique, Ag and Se nanodomains grew on 2D surface oxide films of gallium-based alloy. The multiple contribution of plasmonic nanodomains enabled the visible-light-assisted hot-electron generation at 2D plasmonic hybrid interfaces, and therefore considerably altered the photonic properties of the 2D Ga₂O₃ nanosheets. Specifically, the multiple contribution of semiconductor–plasmonic hybrid 2D heterointerfaces enabled efficient CO₂ conversion through combined photocatalysis and triboelectric-activated catalysis. The solar-powered acoustic-activated conversion approach of the present study enabled us to achieve the CO₂ conversion efficiency of more than 94% in the reaction chambers containing 2D Ga₂O₃-Ag nanosheets. Full article