Search Results (160)

Background: Solid organ transplantation (SOT) is a life-saving treatment for patients with end-stage diseases and/or organ failure. However, access to healthy organs is often limited by challenges in organ preservation. Furthermore, upon transplantation, ischemia–reperfusion injury (IRI) can lead to increased organ rejection or graft failures. The work presented aims to address both challenges using an innovative nanomedicine platform for simultaneous drug and oxygen delivery. In recent studies, resveratrol (RSV), a natural antioxidant, anti-inflammatory, and reactive oxygen species (ROS) scavenging agent, has been reported to protect against IRI by inhibiting ferroptosis. Here, we report the design, development, and scalable manufacturing of the first-in-class dual-function perfluorocarbon-nanoemulsion (PFC-NE) perfusate for simultaneous oxygen and antioxidant delivery, equipped with a near-infrared fluorescence (NIRF) reporter, longitudinal, non-invasive NIRF imaging of perfusate flow through organs/tissues during machine perfusion. Methods: A Quality-by-Design (QbD)-guided optimization was used to formulate a triphasic PFC-NE with 30% w/v perfluorooctyl bromide (PFOB). Drug-free perfluorocarbon nanoemulsions (DF-NEs) and RSV-loaded nanoemulsions (RSV-NEs) were produced at 250–1000 mL scales using M110S, LM20, and M110P microfluidizers. Colloidal attributes, fluorescence stability, drug loading, and RSV release were evaluated using DLS, NIRF imaging, and HPLC, respectively. PFC-NE oxygen loading and release kinetics were evaluated during perfusion through the BMI OrganBank^® machine with the MEDOS HILITE^® oxygenator and by controlled flow of oxygen. The in vitro antioxidant activity of RSV-NE was measured using the oxygen radical scavenging antioxidant capacity (ORAC) assay. The cytotoxicity and ferroptosis inhibition of RSV-NE were evaluated in RAW 264.7 macrophages. Results: PFC-NE batches maintained a consistent droplet size (90–110 nm) and low polydispersity index (<0.3) across all scales, with high reproducibility and >80% PFOB loading. Both DF-NE and RSV-NE maintained colloidal and fluorescence stability under centrifugation, serum exposure at body temperature, filtration, 3-month storage, and oxygenation. Furthermore, RSV-NE showed high drug loading and sustained release (63.37 ± 2.48% at day 5) compared with the rapid release observed in free RSV solution. In perfusion studies, the oxygenation capacity of PFC-NE consistently exceeded that of University of Wisconsin (UW) solution and demonstrated stable, linear gas responsiveness across flow rates and FiO₂ (fraction of inspired oxygen) inputs. RSV-NE displayed strong antioxidant activity and concentration-dependent inhibition of free radicals. RSV-NE maintained higher cell viability and prevented RAS-selective lethal compound 3 (RSL3)-induced ferroptosis in murine macrophages (macrophage cell line RAW 264.7), compared to the free RSV solution. Morphological and functional protection against RSL3-induced ferroptosis was confirmed microscopically. Conclusions: This study establishes a robust and scalable PFC-NE platform integrating antioxidant and oxygen delivery, along with NIRF-based non-invasive live monitoring of organ perfusion during machine-supported preservation. These combined features position PFC-NE as a promising next-generation acellular perfusate for preventing IRI and improving graft viability during ex vivo machine perfusion. Full article

Organic monosubstituted hydrazine derivatives (Ar-NHNH₂, RC(O)-NHNH₂, Alkyl-NHNH₂) are synthetically available, atom-efficient and stable sources of C-centered radicals upon oxidation with extrusion of the energetically favorable N₂ molecule. This review summarizes the synthetic application of monosubstituted hydrazine derivatives (arylhydrazines, carbazates, acylhydrazides, hydrazine carboxamides and alkylhydrazines) in free-radical C-C bond-forming reactions. The main application directions in this field are (a) alkene difunctionalization, (b) cascade cyclization initiated by the addition of hydrazine-derived C-centered radicals to acrylamides and isonitriles, and (c) CH-functionalization of (hetero)arenes via C-centered radical addition followed by oxidative dehydrogenation (re-aromatization). Full article

Background: 8-Quinolinol and its derivatives are drawing significant attention across various disciplines due to their remarkable versatility. These compounds are well-known for their exceptional chelating ability, forming stable metal complexes via their nitrogen and oxygen electron donor atoms. This main characteristic determines their broad utility. Biological activity can also be explained by the chelating capacity, which allows 8-quinolinol to bind to essential metal ions such as Fe, Zn, Cu, and others. This chelation disrupts metal-dependent biological processes in target cells or organisms, leading to a range of effects, including antimicrobial, anticancer, antifungal, and neuroprotective activities. On the other hand, the biological activity of pyrazole derivatives is attributed to their heterocyclic structure, which allows for interactions with biological targets that can lead to enzyme inhibition, receptor antagonism, radical scavenging, and other effects. Objective: This work aimed to synthesize and characterize novel diazene compounds derived from 8-quinolinol or 2-methyl-8-quinolinol and pyrazole amines, and to evaluate their antimicrobial and anticancer activities. Methods: The compounds have been synthesized by coupling diazonium salts obtained from the diazotization of heterocyclic amines with 8-quinolinol and its derivative, 2-methyl-8-quinolinol. The careful selection of reaction conditions enabled the synthesis of high-purity products. The compounds were characterized by 1D and 2D NMR, FT-IR spectroscopy, UV-Vis spectroscopy, and LC-HRMS analysis. The biological activity of the newly synthesized compounds was evaluated following the protocols of EU-OPENSCREEN, a European Research Infrastructure Consortium (ERIC) initiative dedicated to supporting early drug discovery. Results: By combining diazonium salts obtained from 3-methyl-1H-pyrazol-5-amine and ethyl 5-amino-3-methyl-1H-pyrazole-4-carboxylate with the aforementioned coupling agents, four novel 8-quinolinol derivatives were synthesized. The further hydrolysis of the ethoxy carbonyl functional group allowed its conversion to a carboxylic functional group, thus expanding the series of new compounds to six members. Several compounds from the series have proven to be biologically active against several human pathogenic microorganisms and the Hep-G2 cancer cell line. Conclusions: The combination of two well-known biologically active scaffolds through a classic diazo coupling reaction allowed the synthesis of novel biologically active compounds, which showed promising results as possible antifungal and anticancer agents. These results represent a foundation for future studies, which will include a broader biological screening and in vivo studies. Full article

The photo-Fenton process is an advanced oxidation method widely employed in environmental remediation. Herein, we developed a novel metal–organic framework@hydrogen-bonded organic framework (MOF/HOF) composite with excellent photo-Fenton-like activity for the efficient degradation of organic dye methylene blue (MB). Cu-based MOF (CuBTC) was firstly prepared via the solvothermal method, then melamine (MA) and trimesic acid (TMA)-based HOF (MA-TMA) was grown in situ on CuBTC with hydrogen bonding interactions to produce the MOF/HOF composite CuBTC-MA. The CuBTC-MA composite could catalyze H₂O₂ to produce active substances for efficient MB degradation. The degradation rate constant of the CuBTC-MA composite was 4.4 times and 16.7 times higher than that of CuBTC and MA-TMA. The remarkably enhanced performance was attributed to the synergistic effect between the efficient separation of electron–holes supported by the type-II heterojunction structure of the CuBTC-MA composite and the Cu(I)/Cu(II) inter-conversion. The CuBTC-MA composite demonstrated exceptional repeatability and maintained a stable performance across a broad pH range. This study provided a novel paradigm for engineering heterogeneous MOF/HOF heterostructures, demonstrating significant potential in advancing photo-Fenton-like catalytic systems for the efficient environmental remediation of organic pollutants through synergistic charge separation and radical generation mechanisms. Full article

Electro-Fenton (EF) technology holds significant promise for degrading recalcitrant organic pollutants. Still, it faces distinct challenges in high-pollutant-load wastewater, including insufficient radical generation, electrode passivation, and mass transfer limitations. This review systematically organizes recent advances in material design and operational strategies to address these issues. We highlight innovative cathode materials (e.g., graphene-based structures, carbon nanotubes, and metal–organic frameworks), stable anodes such as boron-doped diamond, and catalysts tailored for harsh conditions. Key operational improvements are discussed, including pH adaptability, current density optimization, and oxygen supply enhancement. The integration of hybrid systems, such as bio-electro-Fenton and photo-electro-Fenton, is also examined. Looking forward, future research for treating high-pollutant load wastewater should focus on: (1) Developing electrodes and catalysts with superior antifouling properties and long-term stability in high-strength, complex wastewaters; (2) Constructing intelligent control systems capable of real-time response to water quality fluctuations for adaptive parameter optimization; (3) Exploring energy-efficient, self-sustaining EF systems coupled with renewable energy sources or incorporating energy recovery units. This review aims to provide a comprehensive reference for subsequent research endeavors and practical applications related to the treatment technology of EF systems in high-pollutant-load wastewater contexts. Full article

To enhance the photocatalytic performance of TiO₂ nanotubes (NTs) for the degradation of Amido Black as an organic pollutant, electrodeposition of bismuth vanadate (BiVO₄) nanostructures was successfully applied. The effect of electrodeposited BiVO₄ (25 s, 50 s, 150 s, 250 s), followed by a thermal treatment on TiO₂-NTs, was studied. The structures of the as-prepared samples were characterized by X-ray diffraction (XRD). Morphological behavior was investigated using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM), both coupled with EDX. Optical characterizations were performed using photoluminescence and diffuse reflectance spectroscopy. The BiVO₄/TiO₂ NTs sample with 50 s deposition time gave the highest photocatalytic performance for Amido Black degradation, 99.4% after 150 min under UV light. This result has been achieved due to the structure and the optical properties of the sample. The heterojunction of both catalysts showed the synergetic effect on the photocatalytic performance where they remained stable after five cycling runs. Furthermore, quenching tests were conducted and proved that superoxide radicals (O₂^•) are the main active species during photodegradation process. Full article

Although fast-paced ongoing industrial growth, on the one hand, enhances the lifestyle of the population, on the other hand, it affects human health and the environment as a result of the discharge of pollutants. To address this, designing a novel and effective photocatalyst is necessary to mitigate increasing environmental pollutants. In the present work, we aim to synthesize a single-phase high-entropy zirconate pyrochlore oxide (Ce_0.2Pr_0.2Zn_0.2Nd_0.2Tb_0.2)₂Zr₂O₇ using a modified Pechini method. The physicochemical properties of the prepared nanoparticles were investigated using X-ray diffraction, UV-visible spectroscopy, field emission scanning electron microscopy, and X-ray photoelectron spectroscopy. The photocatalytic properties were examined using cationic dye (methylene blue), anionic dye (Congo red), and Cr(VI). Photocatalytic degradation experiments demonstrate exceptional efficiency in the removal of persistent organic pollutants. The photocatalytic results indicate that the prepared high-entropy (Ce_0.2Pr_0.2Zn_0.2Nd_0.2Tb_0.2)₂Zr₂O₇ zirconate pyrochlore oxide could effectively degrade dyes and reduce Cr(VI). Radical trapping experiments indicate that the degradation of dyes was driven by the hydroxyl radicals, superoxide radicals, and holes. Furthermore, the position of the valence band and conduction band promoted efficient photocatalytic reaction kinetics. The prepared photocatalyst remains structurally stable and can be reused three times without losing activity. Full article

Metal–organic frameworks (MOFs) are promising materials for environmental remediation, particularly in photocatalysis. In this work, a novel ZMIP nanocomposite was fabricated by integrating MIP-202(Zr) bio-MOF with ZnO nanoparticles. For the first time, ZnO nanoparticles were green-synthesized using water lettuce extract and incorporated into MIP-202(Zr) via a mild hydrothermal route. The resulting hybrid was applied as a visible-light photocatalyst for carbamazepine (CBZ) degradation in real pharmaceutical wastewater. Structural analyses (XRD, FTIR, TEM, EDS) verified the successful incorporation of ZnO into the MIP-202(Zr) framework. The composite exhibited a narrowed bandgap of 2.74 ± 0.1 eV compared to 4.05 ± 0.06 eV for pristine MIP-202 and 3.77 ± 0.04 eV for ZnO, highlighting enhanced visible-light utilization in ZMIP. Operational parameters were optimized using response surface methodology, where CBZ removal reached 99.37% with 84.39% TOC mineralization under the optimal conditions (90 min, pH 6, 15 mg/L CBZ, 1.25 g/L catalyst). The catalyst maintained stable performance over five reuse cycles. Radical quenching and UHPLC-MS analyses identified the dominant reactive oxygen species and generated intermediates, elucidating the degradation mechanism and pathways. Beyond CBZ, the ZMIP photocatalyst effectively degraded other pharmaceuticals, including doxorubicin, tetracycline, paracetamol, and ibuprofen, achieving degradation efficiencies of 82.93%, 76.84%, 72.08%, and 67.71%, respectively. Application on real pharmaceutical wastewater achieved 78.37% TOC removal under the optimum conditions. Furthermore, the supplementation of the photocatalytic system by inorganic oxidants ameliorated the degradation performance, following the order KIO₄ > K₂S₂O₈ > KHSO₅ > H₂O₂. Overall, ZMIP demonstrates excellent activity, reusability, and versatility, underscoring its potential as a sustainable photocatalyst for real wastewater treatment. Full article

Consumer demand for organic and nitrite-free meat products has stimulated the search for sustainable alternatives to synthetic curing agents. Conventional nitrites are effective in stabilizing color, inhibiting lipid oxidation, and suppressing pathogens, but their use raises health concerns due to potential nitrosamine formation. This study investigated the application of Portulaca oleracea powder as a multifunctional ingredient to fully replace sodium nitrite in organic cooked frankfurters. Two formulations were produced: control frankfurters with sodium nitrite and experimental frankfurters with purslane powder 1.2%. Physicochemical, oxidative, proteomic, and antioxidant parameters were monitored during refrigerated storage. Purslane incorporation improved the lipid profile by increasing α-linolenic acid and lowering the ω-6/ω-3 ratio, while peroxide, thiobarbituric acid reactive substances (TBARS), and acid values remained significantly lower than in nitrite-containing controls after 10 days. Protein oxidation was also reduced, and SDS-PAGE profiles confirmed that the major structural muscle proteins remained stable, indicating that purslane addition did not disrupt the core proteome. Antioxidant assays showed strong ferric-reducing antioxidant power (FRAP) activity 13.7 mg GAE/g and enhanced 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical-scavenging capacity 22.3%, highlighting purslane’s contribution to oxidative stability. Although redness (a*) was lower than in nitrite controls, overall color stability (L*, b*) remained high. Taken together, purslane enhanced oxidative stability and quality attributes of nitrite-free organic frankfurters; microbiological validation is ongoing and will be reported separately. Full article

The healing issue is a central, not completely understood, problem in pharmacology, approached by many concepts. One of the most well-known is Robert’s and Szabo’s concept of cytoprotection, which holds innate cell (epithelial (Robert), endothelial (Szabo)) integrity, protection/maintenance/reestablishing in the stomach to be translated to other organ therapy (cytoprotection→organoprotection) via cytoprotection agent’s effect. Thereby, we defend stable gastric pentadecapeptide BPC 157 therapy, efficacy, pleiotropic beneficial effects along with high safety (LD1 not achieved) against Józwiak and collaborators’ review speculating its negative impact, speculation of angiogenesis toward tumorogenesis, increased NO and eNOS, toward damaging free radicals formation, and neurodegenerative diseases (Parkinson’s disease and Alzheimer’s disease). Contrarily, in wound healing and general healing capabilities as reviewed, as a cytoprotective agent, and native cytoprotection mediator, BPC 157 controls angiogenesis and the NO-system healing functions, and counteracts the pathological presentation of neurodegenerative diseases in acknowledged animal models (i.e., Parkinson’s disease and Alzheimer’s disease), and presents prominent anti-tumor potential, in vivo and in vitro. BPC 157 resolved cornea transparency maintenance, cornea healing “angiogenic privilege” (vs. angiogenesis/neovascularization/tumorogenesis), does not produce corneal neovascularization, but rather opposes it, and per Folkman’s concept, it demonstrates anti-tumor effect in vivo and in vitro. BPC 157 exhibits a distinctive effect on NO-level (increase vs. decrease), always combined with counteraction of free radicals formation, and in mice and rats, BPC 157 therapy counteracts Parkinson’s disease-like and Alzheimer’s disease-like disturbances. Thus, BPC 157 therapy means targeting angiogenesis and NO’s cytotoxic and damaging actions, but maintaining, promoting, or recovering their essential protective functions. Full article

Water pollution caused by increasing industrial and human activity remains a serious environmental challenge, especially due to the persistence of organic contaminants in aquatic systems. Photocatalysis offers a promising and eco-friendly solution, but in the case of bismuth oxide (Bi₂O₃) there is still a limited understanding of how structural and morphological features influence photocatalytic performance. In this work, a straightforward hydrothermal synthesis method followed by controlled calcination was developed to produce phase-pure α- and β-Bi₂O₃ with tunable morphologies. By varying the hydrothermal temperature and reaction time, distinct structures were successfully obtained, including flower-like, broccoli-like, and fused morphologies. XRD analyses showed that the final crystal phase depends solely on the calcination temperature, with β-Bi₂O₃ forming at 350 °C and α-Bi₂O₃ at 500 °C. SEM and BET analyses confirmed that morphology and surface area are strongly influenced by the hydrothermal conditions, with the flower-like β-Bi₂O₃ exhibiting the highest surface area. UV–Vis spectroscopy revealed that β-Bi₂O₃ also has a lower bandgap than its α counterpart, making it more responsive to visible light. Photocatalytic tests using Rhodamine B showed that the flower-like β-Bi₂O₃ achieved the highest degradation efficiency (81% in 4 h). Kinetic analysis followed pseudo-first-order behavior, and radical scavenging experiments identified hydroxyl radicals, superoxide radicals, and holes as key active species. The catalyst also demonstrated excellent stability and reusability. Additionally, Methyl Orange (MO), a more stable and persistent azo dye, was selected as a second model pollutant. The flower-like β-Bi₂O₃ catalyst achieved 73% degradation of MO at pH = 7 and complete removal under acidic conditions (pH = 2) in less than 3 h. These findings underscore the importance of both phase and morphology in designing high-performance Bi₂O₃ photocatalysts for environmental remediation. Full article

Reverse osmosis (RO) concentrated water can be effectively treated with catalytic ozone oxidation technology, an effective advanced oxidation process. In order to provide a thorough reference for the safe treatment and reuse of RO concentrated water, this paper examines the properties of RO concentrated water, such as its high salt content, high levels of organic pollutants, and low biochemistry. It also examines the mechanism of its role in treating RO concentrated water and combs through its applications in municipal, petrochemical, coal chemical, industrial parks, and other industries. The study demonstrates that ozone oxidation technology can efficiently eliminate the organic matter that is difficult to break down in RO concentrated water and lower treatment energy consumption; however, issues with free radical inhibitor interference, catalyst recovery, and stability still affect its use. Future research into multi-technology synergistic processes, the development of stable and effective non-homogeneous catalysts, and the promotion of their use at the “zero discharge” scale for industrial wastewater are all imperative. Full article

Resveratrol is one of the most extensively studied natural products due to its pleiotropic health benefits. However, its low water solubility and limited stability hinder its application in the nutraceutical, cosmetic, and pharmaceutical sectors. In this work, we investigated the ability of a cationic mono-choline-β-cyclodextrin derivative to complex trans-resveratrol. The complex was prepared using a phase solubility method without using organic solvents and was found to be stable after freeze-drying. The complex was characterized by a phase solubility study, NMR spectroscopy, and molecular modeling simulations, which revealed a 1:1 stoichiometry, a stability constant of 2051 M⁻¹ (K_C), and structural details. Complexation improved resveratrol’s solubility and dissolution rate, reduced its photoinduced trans-to-cis isomerization, and preserved its radical scavenging activity. The wound-healing activity of the complex was demonstrated via in vitro experiments on human keratinocyte cells. Full article

The radical-mediated intramolecular translocation of cyano groups has been recognized as a useful tool for the site-selective functionalization of organic molecules. The process is believed to proceed through the addition of an in situ-generated carbon-centered radical to the nitrile triple bond, followed by the β-scission of the resulting cyclic iminyl radical intermediate to relocate the cyano group and produce a more stable carbon radical for further elaboration. Beginning in the early 1960s and continuing for the next forty years, the research in this particular area has seen a surge of growth during the past two decades with advancements in radical chemistry and photocatalysis. The present article attempts to conduct a comprehensive review of existing studies on this topic by covering the literature from 1961 to 2025. The procedures developed for the purpose are grouped and discussed in four sections according to the strategies used to generate the initial carbon radicals, which include (i) hydrogen-atom transfer (HAT), (ii) radical addition to the π system, (iii) halogen-atom transfer (XAT), and (iv) the homolytic fission of a C-C single bond. In each section, a specific emphasis will be placed on reaction conditions, substrate scopes, and mechanisms. Full article

Climate change poses significant risks to food security and contributes to widespread soil degradation. Effective strategies are urgently needed to mitigate its impacts and ensure stable crop production and food quality. Biochar has shown strong potential to reduce greenhouse gas emissions, enhance carbon sequestration, and immobilize soil contaminants such as heavy metals and organic pollutants. These benefits can lead to increased crop yields, improved nutritional quality, and reduced uptake of harmful substances by plants. This review summarizes the possible mechanisms through which biochar influences the biochar–soil–plant interface, aiming to provide a comprehensive understanding of its multifaceted roles. Although positive effects of biochar on crop production are frequently reported, neutral or even negative outcomes have also been observed. Such adverse effects may be attributed to the presence of volatile organic compounds, free radicals, or heavy metals in certain biochars that inhibit plant growth. Additionally, biochar application has been found to reduce plant infections caused by pathogens, likely due to the presence of organic compounds that act as microbial inhibitors. A deeper understanding of the mechanisms by which biochar affects plant growth is essential for its effective use as a tool to combat climate change and enhance food security. Full article