Search Results (325)

The Mediterranean region is regarded as a hot spot on Earth because of its placement at the junction of many aerosols. Numerous studies have demonstrated that the North Atlantic Oscillation (NAO), which is closely related to the El Niño–Southern Oscillation (ENSO) phenomenon, influences the weather in the area. However, a recent study by the same author examined the ENSO effect on atmospheric processes in this area and discovered a slight but notable influence. This study builds on that earlier work, but it divides the Mediterranean region into four smaller regions during the same time span as the previous study, which is extended by two years, from 1980 to 2024. The division is based on geographical, climatological, and atmospheric process features. The findings demonstrate that volcanic eruptions significantly affect the total amount of aerosols. Additionally, the current study reveals that the Granger-causality test of the physical phenomena of solar activity, ENSO, and NAO indicates that all have a significant impact, either separately or in combination, on the atmospheric process over the four Mediterranean regions, and this effect can last up to six months. Moreover, a taxonomy of the different forms of aerosols across the four subregions is given. Full article

The ongoing global warming threatens the Greenland Ice Sheet (GIS), which has exhibited an overall mass loss since 1990. This loss varies annually and interannually, reflecting the intricate interactions between the ice sheet and atmospheric and oceanic circulations. We investigate GIS mass balance variations (2002–2024) using data from the Gravity Recovery and Climate Experiment (GRACE) and its Follow-On (GRACE-FO) missions. Monthly mass anomalies from the International Combination Service for Time-variable Gravity Fields (COST-G) solution are compared with cumulative climate indices (North Atlantic Oscillation—NAO, Greenland Blocking Index—GBI, Atlantic Multidecadal Oscillation—AMO) and meteorological parameters (temperature, precipitation, surface albedo). Empirical Orthogonal Function analysis reveals five principal modes of variations, the first capturing annual and interannual frequencies (4–7 and 11 years), while subsequent modes only describe interannual frequencies. Wavelet analysis shows significant annual correlations between GIS mass changes and temperature (r = −0.88), NAO (r = 0.74), and GBI (r = −0.85). An annual cycle connects GIS mass changes, climatic indices, and meteorological parameters, while interannual variations highlight the role of the AMO and the NAO. The presence of an 11-year periodicity with the mass variations for NAO, GBI, and temperature strongly correlates with solar activity. Full article

China’s Yangtze and Yellow River Basins exhibit divergent drought patterns, yet the underlying mechanisms driving these differences remain underexplored. This study compares their drought characteristics from 1961 to 2022 using the Standardized Precipitation Index, Standardized Precipitation Evapotranspiration Index, and Palmer Drought Severity Index, and identifies their drivers through attribution models and interpretable machine learning. Our results reveal two distinct paradigms: the Yangtze Basin is characterized by high-frequency, over 14% in all seasons, short-duration droughts, reflecting a rapid hydrological response, while the Yellow River Basin experiences low-frequency, long-duration events indicative of strong soil moisture memory. Quantitative attribution demonstrates that atmospheric evaporative demand (VPD) plays a significantly greater role in the Yellow River Basin, contributing over 20% to soil drought, far exceeding its 14.4% contribution in the Yangtze Basin. Furthermore, their large-scale drivers differ fundamentally: the Yangtze Basin responds primarily to the Atlantic Multidecadal Oscillation (AMO) and Arctic Oscillation (AO), whereas the Yellow River Basin is mainly influenced by solar activity and the El Niño-Southern Oscillation (ENSO). These findings reveal that Yangtze drought is primarily driven by precipitation deficits, while Yellow River drought is a composite phenomenon amplified by evaporative demand. This distinction underscores the need for basin-specific water management strategies. Full article

This paper presents the development and evaluation of an autonomous solar dryer designed to enhance the drying efficiency of bee bread granules. In contrast to natural open-air drying, the proposed system utilizes solar energy in an oscillating operational mode to achieve a controlled and accelerated drying process. The dryer comprises a solar collector integrated into the base of the drying chamber, which facilitates convective heating of the drying agent (air). The system is further equipped with a photovoltaic panel to generate electricity for powering and controlling the operation of air extraction fans. The methodology combines numerical modeling with experimental studies, structured by an experimental design framework. The modeling component simulates variations in temperature (288–315 K) and relative humidity within a layer of bee bread granules subjected to a convective air flow. The numerical simulation enabled the determination of the following: the time required to achieve a stationary operating mode in the dryer chamber (20 min); and the rate of change in moisture content within the granule layer during conventional drying (18 h) and solar drying treatment (6 h). The experimental investigations focused on determining the effects of granule mass, air flow rate, and drying time on the moisture content and temperature of the granular layer of Bee Bread. A statistically grounded analysis, based on the design of experiments (DoE), demonstrated a reduction in moisture content from an initial 16.2–18.26% to a final 11.1–12.1% under optimized conditions. Linear regression models were developed to describe the dependencies for both natural and forced convection drying. A comparative evaluation using enthalpy–humidity (I-d) diagrams revealed a notable improvement in the drying efficiency of the proposed method compared to natural drying. This enhanced performance is attributed to the system’s intermittent operational mode and its ability to actively remove moist air. The results confirm the potential of the developed system for sustainable and energy-efficient drying of bee bread granules in remote areas with limited access to a conventional power grid. Full article

Copper nitride (Cu₃N) is gaining attention as an eco-friendly thin-film semiconductor in a myriad of applications, including storage devices, microelectronic components, photodetectors, and photovoltaic cells. This work presents a detailed optoelectronic study of Cu₃N thin films grown by reactive RF-magnetron sputtering under pure N₂. An overview of the state-of-the-art literature on this material and its potential applications is also provided. The studied films consist of Cu₃N polycrystals with a cubic anti-ReO₃ type structure exhibiting a preferential (100) orientation. Their optical properties across the UV-Vis-NIR spectral range were investigated using a combination of multi-angle spectroscopic ellipsometry, broadband transmission, and reflection measurements. Our model employs a stratified geometrical approach, primarily to capture the depth-dependent compositional variations of the Cu₃N film while also accounting for surface roughness and the underlying glass substrate. The complex dielectric function of the film material is precisely determined through an advanced dispersion model that combines multiple oscillators. By integrating the Tauc–Lorentz, Gaussian, and Drude models, this approach captures the distinct electronic transitions of this polycrystal. This customized optical model allowed us to accurate extract both the indirect (1.83–1.85 eV) and direct (2.38–2.39 eV) bandgaps. Our multifaceted characterization provides one of the most extensive studies of Cu₃N thin films to date, paving the way for optimized device applications and broader utilization of this promising binary semiconductor, and showing its particular potential for photovoltaic given its adequate bandgap energies for solar applications. Full article

Reliable power generation from solar cells is critical for spacecraft operation. High-energy laser irradiation poses a significant threat, as it can potentially cause irreversible damage to solar cells, which is difficult to detect remotely using conventional techniques such as radar or optical imaging. Spectral detection offers a potential approach through unique “spectral fingerprints,” but the spectral characteristics of laser-damaged solar cells remain insufficiently documented. This study investigates the scattering spectral characteristics of triple-junction GaAs (Gallium Arsenide) solar cells subjected to nanosecond pulsed laser irradiation to establish spectral signatures for damage assessment. GaAs solar cells were irradiated at varying energy densities. Bidirectional Reflectance Distribution Function (BRDF) spectra (400–1200 nm) were measured. A thin-film interference model was used to simulate damage effects by varying layer thicknesses, thereby interpreting experimental results. The results demonstrate that as the laser energy density increases from 0.12 to 2.96 J/cm², the number of absorption peaks in the visible range (400–750 nm) decreases from three to zero, and the oscillation in the near-infrared range vanishes completely, indicating progressive damage to the GaInP (Gallium Indium Phosphide) and GaAs layers. This study provides a spectral-based approach for remote assessment of laser-induced damage to solar cells, which is crucial for satellite health monitoring. Full article

Community Earth System Model-Large Ensemble (CESM-LE) simulations are used to partition the Surface Air Temperature (SAT) trends over East Asia into the contribution of external forcing factors and internal variability. In the historical period (1966–2005), the summer SAT trends display a considerable diversity (≤−2 °C to ≥2 °C) across the 35 member ensembles, while under the RCP8.5 scenario, the region is mostly dominated by a strong warming trend (~1.5–2.5 °C/51 years) and touches the ~4 °C mark by the end of the 21st century. In the historical period, the warming is prominent over the Yangtze River basin of China, while under the RCP8.5 scenario, the warming pattern shifts northward towards Mongolia. In the historical period, the Signal-to-Noise Ratio (SNR) is less than 1, while it is higher than 4 under the RCP8.5 scenario, which indicates that, in the early period, internal variability overrides the forced response and vice versa under the RCP8.5 scenario. In addition, over much of the East Asian region, the chances of cooling are relatively high in the historical period, which partially counteracted the warming trend due to external forcing factors. In contrast, under the RCP8.5 scenario, the chances of warming reach ~100% over East Asia due to contributions from the external forcing factors. The novel aspect of the current study is that, in the negative phase (from the mid-1960s to ~2000), the Atlantic Multidecadal Oscillation (AMO) accounts for ~70–80% of the cooling trend or the SAT variability over East Asia, and thereafter, natural variability exhibits a slow increasing trend in the future. However, the contribution of external forcing factors increases from ~55% in 2000 to 95% in 2075 at a rate much faster than natural variability, which is primarily due to increasing downward solar radiation fluxes and albedo feedback on SAT over East Asia. Full article

Microgrids have emerged as a crucial solution for addressing environmental concerns, such as reducing greenhouse gas emissions and enhancing energy sustainability. By incorporating renewable energy sources like solar and wind, microgrids improve energy efficiency and offer a cleaner alternative to conventional power grids. Among various microgrid architectures, DC microgrids are gaining significant attention due to their higher efficiency, reduced reactive power losses, and direct compatibility with renewable energy sources and energy storage systems. However, DC microgrids face stability challenges, particularly due to the presence of constant power loads (CPLs), which exhibit negative incremental impedance characteristics. These loads can destabilize the system, leading to oscillations and performance degradation. This paper explores various control strategies designed to enhance the stability and dynamic response of DC microgrids, with a particular focus on interleaved boost converters (IBCs) interfaced with CPLs. Traditional control methods, including proportional–integral (PI) and sliding mode control (SMC), have shown limitations in handling dynamic variations and disturbances. To overcome these challenges, this paper proposes a novel RST-based control strategy for IBCs, offering improved stability, adaptability, and disturbance rejection. The efficacy of the RST controller is validated through extensive simulations tests, demonstrating competitive performance in maintaining DC bus voltage regulation and current distribution. Key performance indicators demonstrate competitive performance, including settling times below 40 ms for voltage transients, overshoot limited to ±2%, minimal voltage deviation from the reference, and precise current sharing between interleaved phases. The findings contribute to advancing the stability and efficiency of DC microgrids, facilitating their broader adoption in modern energy systems. Full article

A solar-pumped Ce:Nd:YAG laser amplifier design is proposed to address the challenge of scaling output power in solar-pumped laser oscillators while maintaining high beam quality. The design employs a 1.33 m² flat Fresnel lens with a 2 m focal length as a primary concentrator, which is combined with a secondary homogenizing concentrator, featuring 40 mm × 40 mm input aperture, 200 mm length, and 11.3 mm × 26 mm output aperture, to provide efficient coupling and uniform distribution of solar radiation onto a 2.9 mm thick Ce:Nd:YAG slab with 11.3 mm × 26 mm surface area and two beveled corners. This geometry enables multiple total internal reflections of a 1064 nm TEM₀₀ mode seed laser beam inside the slab, ensuring efficient interaction with the active Ce³⁺ and Nd³⁺ ions in the gain medium. Performed numerical analysis shows that the present approach can deliver a uniform solar pump power density of 2.5 W/mm² to the slab amplifier. This value is 2.05-times higher than the numerically calculated power density incident on the Nd:YAG slab of the previous solar-pumped amplifier that achieved the highest continuous-wave laser gain of 1.64. Furthermore, the optimized slab geometry with 0.44 width-to-height ratio allows the seed laser to undergo 32 internal reflections, extending its optical path length by a factor of 1.45 compared to the earlier design. These numerical achievements, combined with the Ce:Nd:YAG medium’s capacity to deliver nearly 1.57-times more laser power than Nd:YAG, reveal the potential of proposed design to yield a gain enhancement factor of 4.16, making the first solar-pumped Ce:Nd:YAG amplifier a promising solution toward energy-efficient, sustainable solutions for terrestrial and space applications. Full article

This study investigates the electro-thermal transient response of a photovoltaic–thermal (PV/T)–heat pump system under dynamic disturbances to optimize operational stability. A dynamic model integrating a PV/T collector and a heat pump was developed by the transient heat current method, enabling high-fidelity simulations of step perturbations: solar irradiance reduction, compressor operation, condenser water flow rate variations, and thermal storage tank volume changes. This study highlights the thermal storage tank’s critical role. For V_tank = 2 m³, water tank volume significantly suppresses the water tank and PV/T collector temperature fluctuations caused by solar irradiance reduction. PV/T collector temperature fluctuation suppression improved by 46.7%. For the PV/T heat pump system in this study, the water tank volume was selected between 1 and 1.5 m³ to optimize the balance of thermal inertia and cost. Despite PV cell electrical efficiency gains from PV cell temperature reductions caused by solar irradiance reduction, power recovery remains limited. Compressor dynamic performance exhibits asymmetry: the hot water temperature drop caused by speed reduction exceeds the rise from speed increase. Load fluctuations reveal heightened risk: load reduction triggers a hot water 7.6 °C decline versus a 2.2 °C gain under equivalent load increases. Meanwhile, water flow rate variation in condenser identifies electro-thermal time lags (100 s thermal and 50 s electrical stabilization), necessitating predictive compressor control to prevent temperature and compressor operation oscillations caused by system condition changes. These findings advance hybrid renewable systems by resolving transient coupling mechanisms and enhancing operational resilience, offering actionable strategies for PV/T–heat pump deployment in building energy applications. Full article

This paper aims to maximize the performance of photovoltaic generators under varying atmospheric conditions by employing an improved variable-step current perturbation Perturb and Observe (IVSCP-PO) MPPT controller. The proposed approach overcomes the limitations of traditional controllers and significantly enhances tracking efficiency. The IVSCP-PO controller locates the maximum power point (MPP) using current perturbation instead of voltage perturbation and employs a variable step iteration based on input variables such as power, voltage, and current for better adjustment of the boost converter’s duty ratio. Comprehensive simulations demonstrate the tracking effectiveness of the IVSCP-PO approach under varied and severe temperature and solar intensity conditions. The results indicate that the IVSCP-PO controller outperforms traditional and recently published methods by avoiding drift and oscillation and minimizing power loss. This translates to maximized static and dynamic tracking efficiencies, reaching 99.99% and 99.98%, respectively. Additionally, the IVSCP-PO controller boasts a record-breaking average tracking time of just 0.002 s, a substantial improvement over traditional and improved PO methods ranging from 0.036 to 0.6 s. To further validate these results, experiments were conducted using the dSPACE 1104 board, demonstrating the superior accuracy and effectiveness of the approach and providing a promising solution to optimize the performance of photovoltaic panels. Full article

Based on the Clouds and the Earth’s Radiant Energy System (CERES) satellite data from 2001 to 2023 and the climate indices from the National Oceanic and Atmospheric Administration (NOAA), this study analyzes the solar irradiance over mainland China and the impacts of clouds and aerosols on it and constructs monthly forecasting models to analyze the influence of climate indices on irradiance forecasts. The irradiance over mainland China shows a spatial distribution of being higher in the west and lower in the east. The influence of clouds on irradiance decreases from south to north, and the influence of aerosols is prominent in the east. The average explained variance of clouds on irradiance is 86.72%, which is much higher than that of aerosols on irradiance, 15.62%. Singular Value Decomposition (SVD) analysis shows a high correlation between the respective time series of irradiance and cloud influence, with the two fields having similar spatial patterns of opposite signs. The variation in solar irradiance can be attributed mainly to the influence of clouds. Empirical Orthogonal Function (EOF) analysis indicates that the variation in the first mode of irradiance is consistent in most parts of China, and its time coefficient is selected for monthly forecasting. Both the traditional multiple linear regression method and the Long Short-Term Memory (LSTM) network are used to construct monthly forecast models, with the preceding time coefficient of the first EOF mode and different climate indices as input. Compared with the multiple linear regression method, LSTM has a better forecasting skill. When the input length increases, the forecasting skill decreases. The inclusion of climate indices, such as the Indian Ocean Basin (IOB), El Nino–Southern Oscillation (ENSO), and Indian Ocean Dipole (IOD), can enhance the forecasting skill. Among these three indices, IOB has the most significant improvement effect. The research provides a basis for accurate forecasting of solar irradiance over China on monthly time scale. Full article

Nonlinear characteristics of solar photovoltaic (PV) and nonuniform surrounding conditions, including partial shading conditions (PSCs), are the major factors responsible for lower conversion efficiency in solar panels. One major condition is the cause of the multiple peaks and oscillation around the peak point leading to power losses. Therefore, this study proposes a novel hybrid framework based on an artificial neural network (ANN) and fractional order PID (FOPID) controller, where new algorithms are employed to train the ANN model and to tune the FOPID controller. The primary aim is to maintain the computed power close to its true peak power while mitigating persistent oscillations in the face of continuously varying surrounding conditions. Firstly, a modified shuffled frog leap algorithm (MSFLA) was employed to train the feed-forward ANN model using real-world solar PV data with the aim of generating a reference solar PV peak voltage. Subsequently, the parameters of the FOPID controller were tuned through the application of the Sanitized Teacher–Learning-Based Optimization (s-TLBO) algorithm, with a specific focus on achieving maximum power point tracking (MPPT). The robustness of the proposed hybrid framework was assessed using two different types (monocrystalline and polycrystalline) of solar panels exposed to varying levels of irradiance. Additionally, the framework’s performance was rigorously tested under cloudy conditions and in the presence of various partial shading scenarios. Furthermore, the adaptability of the proposed framework to different solar panel array configurations was evaluated. This work’s findings reveal that the proposed hybrid framework consistently achieves maximum power point with minimal oscillation, surpassing the performance of recently published works across various critical performance metrics, including the $MP{P}_{efficiency}$, relative error (RE), mean squared error (MSE), and tracking speed. Full article

Earth’s energy imbalance (EEI) is a major indicator of climate change. Its metrics are top of the atmosphere radiation imbalance (EEI TOA) and net internal heat uptake. Both EEI and temperature are expected to respond gradually to forcing on annual timescales. This expectation was tested by analyzing regime changes in the inputs to EEI TOA along with increasing ocean heat content (OHC). Outward longwave radiation (OLR) displayed rapid shifts in three observational and two reanalysis records. The reanalysis records also contained shifts in surface fluxes and temperature. OLR, outward shortwave radiation (OSR) and TOA net radiation (Net) from the CERES Energy Balanced and Filled Ed-4.2.1 (2001–2023) record and from 27 CMIP5 historical and RCP4.5 forced simulations 1861–2100, were also analyzed. All variables from CERES contained shifts but the record was too short to confirm regime changes. Contributions of OLR and OSR to net showed high complementarity over space and time. EEI TOA was −0.47 ± 0.11 W m⁻² in 2001–2011 and −1.09 ± 0.11 W m⁻² in 2012–2023. Reduced OSR due to cloud feedback was a major contributor, coinciding with rapid increases in sea surface temperatures in 2014. Despite widely varying OLR and OSR, 26/27 climate models produced stable regimes for net radiation. EEI TOA was neutral from 1861, shifting downward in the 26 reliable records between 1963 and 1995, with 25 records showing it stabilizing by 2039. To investigate heat uptake, temperature and OHC 1955/57–2023 was analyzed for regime change in the 100 m, 700 m and 2000 m layers. The 100 m layer, about one third of total heat content, was dominated by regimes. Increases became more gradual with depth. Annual changes between the 700 m layer and 1300 m beneath were negatively correlated (−0.67), with delayed oscillations during lag years 2–9. Heat uptake at depth is dynamic. These changes reveal a complex thermodynamic response to gradual forcing. We outline a complex arrangement of naturally evolved heat engines, dominated by a dissipative heat engine nested within a radiative engine. EEI is a property of the dissipative heat engine. This far-from-equilibrium natural engine has evolved to take the path of least resistance while being constrained by its maximum power limit (~2 W m⁻²). It is open to the radiative engine, receiving solar radiation and emitting scattered shortwave and longwave radiation. Steady states maximize entropy within the dissipative engine by regulating spatial patterns in surface variables that influence outgoing OLR and OSR. Regime shifts to warmer climates balance the cost of greater irreversibility with increased energy rate density. The result is the regulation of EEI TOA through a form of thermodynamic metabolism. Full article

The forest ecosystems of large Mediterranean islands are critical hubs of evolutionary diversity with unique floristic composition and distinctive vegetation patterns reflecting long-term population dynamics and ecological legacies. Mediterranean islands provide invaluable natural archives, preserving crucial insights into the resilience of past forest ecosystems and their responses to climate variability. In this paper, we provide a comprehensive overview of the Holocene vegetation history of major western Mediterranean islands, with the twofold aim of examining the timing, extent, and rates of vegetation changes over the last few thousand years, and evaluating the influence of Rapid Climate Changes (RCCs) on forest ecosystems. The rate of change analysis allowed the identification of a distinct pattern of rapid shifts in forest composition, corresponding to periods of climate instability. These shifts align with the periodicity of Bond events, suggesting synchronicity between changes in forest ecosystems and centennial-scale climatic oscillations at a supra-regional scale. A REDFIT spectral analysis applied to palynological proxies of forest cover changes identified prominent periodicities suggesting a direct influence of solar activity and/or a relation with complex ocean–atmosphere circulation mechanisms triggered by global climate forcings. Full article