Search Results (189)

Artificial intelligence (AI) has emerged as a transformative technology in the evolution of massive multiple-input multiple-output (ma-MIMO) systems, positioning them as a cornerstone for sixth-generation (6G) wireless networks. Despite their significant potential, ma-MIMO systems face critical challenges at the receiver end, particularly in signal detection under high-dimensional and noisy environments. To address these limitations, this paper proposes MIMONet, a novel deep learning (DL)-based MIMO detection framework built upon a lightweight and optimized feedforward neural network (FFNN) architecture. MIMONet is specifically designed to achieve a balance between detection performance and complexity by optimizing the neural network architecture for MIMO signal detection tasks. Through extensive simulations across multiple MIMO configurations, the proposed MIMONet detector consistently demonstrates superior bit error rate (BER) performance. It achieves a notably lower error rate compared to conventional benchmark detectors, particularly under moderate to high signal-to-noise ratio (SNR) conditions. In addition to its enhanced detection accuracy, MIMONet maintains significantly reduced computational complexity, highlighting its practical feasibility for advanced wireless communication systems. These results validate the effectiveness of the MIMONet detector in optimizing detection accuracy without imposing excessive processing burdens. Moreover, the architectural flexibility and efficiency of MIMONet lay a solid foundation for future extensions toward large-scale ma-MIMO configurations, paving the way for practical implementations in beyond-5G (B5G) and 6G communication infrastructures. Full article

Reconfigurable intelligent surfaces (RISs), recognized as one of the most promising key technologies for sixth-generation (6G) mobile communications, are characterized by their minimal energy expenditure, cost-effectiveness, and straightforward implementation. In this study, we develop a novel communication channel model that integrates RIS-enabled base stations with unmanned ground vehicles. To enhance the system’s adaptability, we implement a fluid antenna system (FAS) at the unmanned ground vehicle (UGV) terminal. This innovative model demonstrates exceptional versatility across various wireless communication scenarios through the strategic adjustment of active ports. The inherent dynamic reconfigurability of the FAS provides superior flexibility and adaptability in air-to-ground communication environments. In the paper, we derive and study key performance characteristics like the autocorrelation function (ACF), validating the model’s effectiveness. The results demonstrate that the RIS-FAS collaborative scheme significantly enhances channel reliability while effectively addressing critical challenges in 6G networks, including signal blockage and spatial constraints in mobile terminals. Full article

The evolution of sixth-generation (6G) wireless networks introduces a complex landscape of cybersecurity challenges due to advanced infrastructure, massive device connectivity, and the integration of emerging technologies. Traditional intrusion detection systems (IDSs) struggle to keep pace with such dynamic environments, often yielding high false alarm rates and poor generalization. This study proposes a novel and adaptive IDS that integrates statistical feature engineering with a deep autoencoder (DAE) to effectively detect a wide range of modern threats in 6G environments. Unlike prior approaches, the proposed system leverages the DAE’s unsupervised capability to extract meaningful latent representations from high-dimensional traffic data, followed by supervised classification for precise threat detection. Evaluated using the CSE-CIC-IDS2018 dataset, the system achieved an accuracy of 86%, surpassing conventional ML and DL baselines. The results demonstrate the model’s potential as a scalable and upgradable solution for securing next-generation wireless networks. Full article

The upcoming deployment of sixth-generation (6G) wireless networks promises to significantly outperform 5G in terms of data rates, spectral efficiency, device densities, and, most importantly, latency and security. To cope with the increasingly complex network traffic, Network Traffic Classification (NTC) will be essential to ensure the high performance and security of a network, which is necessary for advanced applications. This is particularly relevant in the Internet of Things (IoT), where resource-constrained platforms at the edge must manage tasks like traffic analysis and threat detection. In this context, balancing classification accuracy with computational efficiency is key to enabling practical, real-world deployments. Traditional payload-based and packet inspection methods are based on the identification of relevant patterns and fields in the packet content. However, such methods are nowadays limited by the rise of encrypted communications. To this end, the research community has turned its attention to statistical analysis and Machine Learning (ML). In particular, Convolutional Neural Networks (CNNs) are gaining momentum in the research community for ML-based NTC leveraging statistical analysis of flow characteristics. Therefore, this paper addresses CNN-based NTC in the presence of encrypted communications generated by the rising Quick UDP Internet Connections (QUIC) protocol. Different models are presented, and their performance is assessed to show the trade-off between classification accuracy and CNN complexity. In particular, our results show that even simple and low-complexity CNN architectures can achieve almost 92% accuracy with a very low-complexity architecture when compared to baseline architectures documented in the existing literature. Full article

Handover (HO) management plays a key role in ensuring uninterrupted connectivity across evolving wireless networks. While previous generations such as 4G and 5G have introduced several HO strategies, these techniques are insufficient to meet the rigorous demands of sixth-generation (6G) networks in ultra-dense, heterogeneous smart city environments. Existing studies often fail to provide integrated HO solutions that consider key concerns such as energy efficiency, security vulnerabilities, and interoperability across diverse network domains, including terrestrial, aerial, and satellite systems. Moreover, the dynamic and high-mobility nature of smart city ecosystems further complicate real-time HO decision-making. This survey aims to highlight these critical gaps by systematically categorizing state-of-the-art HO approaches into AI-based, fuzzy logic-based, and hybrid frameworks, while evaluating their performance against emerging 6G requirements. Future research directions are also outlined, emphasizing the development of lightweight AI–fuzzy hybrid models for real-time decision-making, the implementation of decentralized security mechanisms using blockchain, and the need for global standardization to enable seamless handovers across multi-domain networks. The key outcome of this review is a structured and in-depth synthesis of current advancements, which serves as a foundational reference for researchers and engineers aiming to design intelligent, scalable, and secure HO mechanisms that can support the operational complexity of next-generation smart cities. Full article

Agriculture 5.0 represents a shift towards a more sustainable agricultural model, integrating Artificial Intelligence (AI), the Internet of Things (IoT), robotics, and blockchain technologies to enhance productivity and resource management, with an emphasis on social and environmental resilience. This article explores how the evolution of wireless technologies to sixth-generation networks (6G) can support innovation in Colombia’s agricultural sector and foster rural advancement. The study follows three main phases: search, analysis, and selection of information. In the search phase, key government policies, spectrum management strategies, and the relevant literature from 2020 to 2025 were reviewed. The analysis phase addresses challenges such as spectrum regulation and infrastructure deployment within the context of a developing country. Finally, the selection phase evaluates technological readiness and policy frameworks. Findings suggest that 6G could revolutionize Colombian agriculture by improving connectivity, enabling real-time monitoring, and facilitating precision farming, especially in rural areas with limited infrastructure. Successful 6G deployment could boost agricultural productivity, reduce socioeconomic disparities, and foster sustainable rural development, contingent on aligned public policies, infrastructure investments, and human capital development. Full article

The Internet of Vehicles (IoV) operates in an environment characterized by asymmetric security threats, where centralized vulnerabilities create a critical imbalance that can be disproportionately exploited by attackers. This study addresses this imbalance by proposing a symmetrical security framework that integrates Blockchain and Federated Learning (FL) to restore equilibrium in the Vehicle–Road–Cloud ecosystem. The evolution toward sixth-generation (6G) technologies amplifies both the potential of vehicle-to-everything (V2X) communications and its inherent security risks. The proposed framework achieves a delicate balance between robust security and operational efficiency. By leveraging blockchain’s symmetrical and decentralized distribution of trust, the framework ensures data and model integrity. Concurrently, the privacy-preserving approach of FL balances the need for collaborative intelligence with the imperative of safeguarding sensitive vehicle data. A novel Cloud Proxy Re-Encryption Offloading (CPRE-IoV) algorithm is introduced to facilitate efficient model updates. The architecture employs a partitioned blockchain and a smart contract-driven FL pipeline to symmetrically neutralize threats from malicious nodes. Finally, extensive simulations validate the framework’s effectiveness in establishing a resilient and symmetrically secure foundation for next-generation IoV networks. Full article

The Industrial Internet of Things (IIoT) has revolutionized industry through interconnected devices and intelligent applications. Leveraging the advancements in sixth-generation cellular networks (6G), the 6G-aided IIoT has demonstrated a superior performance across applications requiring low latency and high reliability, with image recognition being among the most pivotal. However, the existing algorithms often neglect the explainability of image recognition processes and fail to address the collaborative potential between edge computing servers. This paper proposes a novel method, IRCE (Intelligent Recognition with Collaborative Edges), designed to enhance the explainability and transferability in 6G-aided IIoT image recognition. By incorporating an explainable layer into the feature extraction network, IRCE provides visual prototypes that elucidate decision-making processes, fostering greater transparency and trust in the system. Furthermore, the integration of the local maximum mean discrepancy (LMMD) loss facilitates seamless transfer learning across geographically distributed edge servers, enabling effective domain adaptation and collaborative intelligence. IRCE leverages edge intelligence to optimize real-time performance while reducing computational costs and enhancing scalability. Extensive simulations demonstrate the superior accuracy, explainability, and adaptability of IRCE compared to those of the traditional methods. Moreover, its ability to operate efficiently in diverse environments highlights its potential for critical industrial applications such as smart manufacturing, remote diagnostics, and intelligent transportation systems. The proposed approach represents a significant step forward in achieving scalable, explainable, and transferable AI solutions for IIoT ecosystems. Full article

With the rapid development of sixth-generation (6G) wireless networks and large-scale multiple-input multiple-output (MIMO) technology, the number of antennas deployed at base stations (BSs) has increased significantly, resulting in a high probability that users are in the near-field region. Note that it is difficult for the traditional far-field plane-wave model to meet the demand for high-precision beamforming in the near-field region. In this paper, we jointly optimize the power and the number of antennas to achieve the maximum energy efficiency for the users located in the near-field region. Particularly, this paper considers the resolution constraint in the formulated optimization problem, which is designed to guarantee that interference between users can be neglected. A low-complexity optimization algorithm is proposed to realize the joint optimization of power and antenna number. Specifically, the near-field resolution constraint is first simplified to a polynomial inequality using the Fresnel approximation. Then the fractional objective of maximizing energy efficiency is transformed into a convex optimization subproblem via the Dinkelbach algorithm, and the power allocation is solved for a fixed number of antennas. Finally, the number of antennas is integrally optimized with monotonicity analysis. The simulation results show that the proposed method can significantly improve the system energy efficiency and reduce the antenna overhead under different resolution thresholds, user angles, and distance configurations, which provides a practical reference for the design of green and low-carbon near-field communication systems. Full article

The capabilities of 6G networks surpass those of existing networks, aiming to enable seamless connectivity between all entities and users at any given time. A critical aspect of achieving enhanced and ubiquitous mobile broadband, as promised by 6G networks, is merging satellite networks with land-based networks, which offers significant potential in terms of coverage area. Advanced routing techniques in next-generation network technologies, particularly when incorporating terrestrial and non-terrestrial networks, are essential for optimizing network efficiency and delivering promised services. However, the dynamic nature of the network, the heterogeneity and complexity of next-generation networks, and the relative distance and mobility of satellite networks all present challenges that traditional routing protocols struggle to address. This paper provides an in-depth analysis of 6G networks, addressing key enablers, technologies, commitments, satellite networks, and routing techniques in the context of 6G and satellite network integration. To ensure 6G fulfills its promises, the paper emphasizes necessary scenarios and investigates potential bottlenecks in routing techniques. Additionally, it explores satellite networks and identifies routing challenges within these systems. The paper highlights routing issues that may arise in the integration of 6G and satellite networks and offers a comprehensive examination of essential approaches, technologies, and visions required for future advancements in this area. 6G and satellite networks are associated with technical terms such as AI/ML, quantum computing, THz communication, beamforming, MIMO technology, ultra-wide band and multi-band antennas, hybrid channel models, and quantum encryption methods. These technologies will be utilized to enhance the performance, security, and sustainability of future networks. Full article

With the continuing development of technology, telepresence services have emerged as an essential part of modern communication systems. Concurrently, the rapid growth of fog computing presents new opportunities and challenges for integrating telepresence capabilities into distributed networks. Fog computing is a component of the cloud computing model that is used to meet the diverse computing needs of applications in the emergence and development of fifth- and sixth-generation (5G and 6G) networks. The incorporation of fog computing into this model provides benefits that go beyond the traditional model. This survey investigates the convergence of telepresence services with fog computing, evaluating the latest advancements in research developments and practical use cases. This study examines the changes brought about by the 6G network as well as the promising future directions of 6G. This study presents the concepts of fog computing and its basic structure. We analyze Cisco’s model and propose an alternative model to improve its weaknesses. Additionally, this study synthesizes, analyzes, and evaluates a body of articles on remote presence services from major bibliographic databases. Summing up, this work thoroughly reviews current research on telepresence services and fog computing for the future. Full article

Terahertz (THz) antennas are among the critical components required for enabling the transition to sixth-generation (6G) wireless networks. Although research on THz antennas for 6G communication systems has garnered significant attention, a standardized antenna design has yet to be established. This study introduces the modeling of a full-metal transverse slotted waveguide antenna (TSWA) for 6G and beyond. The proposed antenna operates across the upper regions of the V-band and the entire W-band. Designed and simulated using widely adopted full-wave analysis tools, the antenna achieves a peak gain of 17 dBi and a total efficiency exceeding 90% within the band. Additionally, it exhibits pattern-reconfigurable capabilities, enabling main lobe beam steering between 5° and 68° with low side lobe levels. Simulations are conducted to assess the power handling capability (PHC) of the antenna, including both the peak (PPHC) and average (APHC) values. The results indicate that the antenna can handle 17 W of APHC within the W-band and 3.4 W across the 60–160 GHz range. Furthermore, corona discharge and multipaction analyses are performed to evaluate the antenna’s power handling performance under extreme operating conditions. These features make the proposed TSWA a strong candidate for high-performance space applications, 6G communication systems, and beyond. Full article

The commercial deployment of fifth generation (5G) mobile communication networks has begun, bringing with it novel offerings, improved user activities, and a variety of opportunities for different types of organizations. However, there still exist several challenges to implementing 5G technology. Sixth generation (6G) wireless communication technology development has begun on a worldwide scale in response to these challenges. Even though there have been many discussions on this topic in the past, many questions remain unanswered in the present literature. The article provides a comprehensive overview of 6G, including the common understanding of the concept, as well as its technical requirements and potential applications. A comprehensive analysis of the 6G network design, potential uses, and key elements are covered. This research article delineates future study topics and unresolved challenges to stimulate an ongoing global discourse. This analysis and content of this study supports the use of different applications and services that will benefit the community in the near future using the 6G technology. Subsequently, recommendations for each problem are provided, offering solutions to unresolved difficulties where functionalities are anticipated to improve, hence enhancing the overall user experience. Full article

Within the dynamic landscape of fifth-generation (5G) and emerging sixth-generation (6G) wireless networks, the adoption of network slicing has revolutionized telecommunications by enabling flexible and efficient resource allocation. However, this advancement introduces new security challenges, as traditional protection mechanisms struggle to address the dynamic and complex nature of sliced network environments. This study proposes a Hybrid Security Framework Using Cross-Layer Integration, combining Software-Defined Networking (SDN), Network Function Virtualization (NFV), and AI-driven anomaly detection to strengthen network defenses. By integrating security mechanisms across multiple layers, the framework effectively mitigates threats, ensuring the integrity and confidentiality of network slices. An implementation was developed, focusing on the AI-based detection process using a representative 5G security dataset. The results demonstrate promising detection accuracy and real-time response capabilities. While full SDN/NFV integration remains under development, these findings lay the groundwork for scalable, intelligent security architectures tailored to the evolving needs of next-generation networks. Full article

Recent advances in Artificial Intelligence (AI)-driven wireless communication are driving the adoption of Sixth Generation (6G) technologies in crucial environments such as hospitals. Visible Light Communication (VLC) leverages existing lighting infrastructure to deliver high data rates while mitigating electromagnetic interference (EMI); however, patient movement induces fluctuating signal strength and dynamic channel conditions. In this paper, we present a novel integration of site-specific ray tracing and machine learning (ML) for VLC-enabled Medical Body Sensor Networks (MBSNs) channel modeling in distinct hospital settings. First, we introduce a Q-learning-based adaptive modulation scheme that meets target symbol error rates (SERs) in real time without prior environmental information. Second, we develop a Long Short-Term Memory (LSTM)-based estimator for path loss and Root Mean Square (RMS) delay spread under dynamic hospital conditions. To our knowledge, this is the first study combining ray-traced channel impulse response modeling (CIR) with ML techniques in hospital scenarios. The simulation results demonstrate that the Q-learning method consistently achieves SERs with a spectral efficiency (SE) lower than optimal near the threshold. Furthermore, LSTM estimation shows that D1 has the highest Root Mean Square Error (RMSE) for path loss (1.6797 dB) and RMS delay spread (1.0567 ns) in the Intensive Care Unit (ICU) ward, whereas D3 exhibits the highest RMSE for path loss (1.0652 dB) and RMS delay spread (0.7657 ns) in the Family-Type Patient Rooms (FTPRs) scenario, demonstrating high estimation accuracy under realistic conditions. Full article