Search Results (246)

The rotational evolution of pulsars is governed by torque mechanisms whose mathematical structure encodes fundamental symmetries of the underlying physics. We demonstrate that the standard spin-down equation $\dot{f}=-sf-r{f}^3-g{f}^5$ derives from a discrete antisymmetry requirement, namely invariance of the torque under reversal of rotation sense, which restricts the frequency dependence to odd integer powers. We show that physically motivated plasma processes systematically break this symmetry, introducing fractional frequency exponents: viscous Ekman pumping at the crust–superfluid boundary layer ($f^{3/2}$), magnetohydrodynamic turbulent dissipation via Kolmogorov and Sweet–Parker cascades ($f^{10/3}$, $f^{11/3}$), non-linear superfluid vortex dynamics ($f^{5/2}$), and saturated r-mode oscillations ($f^{7-2\beta }$). The central result is an exact analytical resolution of the long-standing Crab pulsar braking index puzzle: the observed $n=2.51\pm 0.01$, which has defied explanation for nearly four decades, emerges naturally from the superposition of magnetic dipole radiation ($\dot{f}\propto f^3$) and boundary layer Ekman pumping ($\dot{f}\propto f^{3/2}$), with analytically derived coefficients yielding a dipole-component surface field $B_p=6.2\times {10}^{12}$ G—higher than the standard $\sqrt{P\dot{P}}$ estimate of $3.8\times {10}^{12}$ G, because that formula conflates dipole and non-dipole torques, but lower than applying the Larmor formula to the full spin-down rate ($7.6\times {10}^{12}$ G), since $32.7\%$ of the total torque is non-radiative boundary-layer dissipation. We develop the Riemann–Liouville fractional calculus formalism for these equations, showing that fractional derivatives break time-translation symmetry through intrinsic memory effects, with solutions expressed in terms of Mittag-Leffler and Fox H-functions that interpolate continuously between exponential (fully symmetric) and power-law (scale-free symmetric) relaxation. Lambert–Tsallis $W_q$ functions with non-extensive parameter q encoding broken statistical symmetry enable equation-of-state-independent inference of neutron star compactness and tidal deformability. Our framework establishes a unified symmetry-based classification of pulsar spin-down mechanisms and predicts frequency-dependent braking indices evolving at rate $\mathrm{d}n/\mathrm{d}t\sim 2\times {10}^{-4}$ yr⁻¹, yielding $\mathrm{\Delta }n\approx 0.01$ over 50 years—testable with current pulsar timing programmes. The formalism provides a coherent theoretical foundation connecting plasma microphysics at the neutron star interior to macroscopic observables in electromagnetic and gravitational wave channels. Full article

Accurate temperature prediction is essential for optimizing the microwave preheating of PET preforms prior to blow molding. A key challenge in this context is the strong dependence of electromagnetic field distributions and thermal responses on preform geometry, which varies substantially across product lines. Conventional neural network models trained on specific geometric configurations typically fail to generalize to unseen preform designs, requiring costly retraining for each new geometry. This work proposes a unified geometry-aware deep learning framework that predicts spatial temperature distributions across multiple preform designs using a single neural network model. The approach reformulates temperature prediction as a coordinate-level regression task conditioned on spatial location, geometric descriptors, process parameters, and structural region labels. A domain-bounded training strategy based on extreme feasible preform geometries is introduced, ensuring that predictions for intermediate designs remain within the interpolation regime of the network. The framework is evaluated on six distinct preform geometries, demonstrating that a single model can generalize reliably to new, unseen preform designs when their geometric parameters fall within the bounds of the training data. This is achieved through a domain-bounded training strategy that constructs datasets from the extreme feasible geometries, thereby converting the prediction of any intermediate design into an interpolation task. Since neural networks are inherently limited in their ability to extrapolate beyond the training domain, this formulation is essential for ensuring stable and accurate predictions across the full range of industrially relevant preform configurations. The proposed methodology provides a foundation for geometry-informed surrogate modeling in thermal process control and can be extended to other manufacturing systems characterized by strong geometric variability. Full article

Water supplies contaminated by heavy metals pose a serious threat to human health, especially in areas without access to centralized testing facilities. While copper is a necessary heavy metal in trace levels, high concentrations can have detrimental effects on health, such as oxidative stress, cognitive impairment, and liver damage. Due to their expense, complexity, and reliance on laboratories, conventional detection techniques are accurate but unsuitable for real-time, dispersed deployment. Machine learning offers a potent solution to these constraints by facilitating the automatic, precise, and quick interpretation of complicated sensor data. It makes it possible to make decisions in real time without requiring a large laboratory infrastructure. In this work, a dual-mode optical sensor was developed using the colorimetry and fluorometry images of carbon dots embedded in hydrogels with the Cu²⁺ concentration of 0, 20, 50, 100, 200, and 500 μM. Data augmentation was used to expand the RGB picture dataset for each modality, and these data were interpolated to provide responses at 1 µM intervals (0–500 µM). We trained a comprehensive set of supervised machine learning models, including Logistic Regression, Support Vector Machines, Random Forest, and XGBoost, to categorize water samples into five risk-informed quality levels. The system achieved classification accuracies exceeding 96%. Furthermore, we built a simple user interface to make the system practically deployable in mobile phone. Together, these results demonstrate a scalable, interpretable, cost-effective, and quick solution for real-time water quality monitoring in resource-constrained environments. Since the proposed method focuses on classifying concentration ranges rather than precise quantification, a formal limit of detection (LOD) was not calculated; instead, the lowest concentration in the experimental dataset serves as the minimum detectable level. Full article

FY-4B/GIIRS (Geostationary Interferometric Infrared Sounder) is a new-generation infrared hyperspectral atmospheric vertical sounder onboard a Chinese geostationary meteorological satellite. Its observations with high spatial and temporal resolution play an important role in high-impact weather forecasts. The GIIRS data assimilation module is developed in the GSI (Gridpoint Statistical Interpolation) assimilation system. Super Typhoon Doksuri in 2023 (No. 5) is taken as an example based on this module in this paper. Firstly, the sensitivity of analysis fields to five data thinning schemes at four daily assimilation times from 22 to 28 July 2023 is analyzed: the wavelet transform modulus maxima (WTMM) scheme, the grid-distance schemes of 30 km, 60 km, and 120 km in the GSI assimilation system, and a center field of view (FOV) scheme. Taking the ERA5 reanalysis fields as true, it is found that the mean error of temperature and humidity analysis for the WTMM scheme is the smallest, followed by the 120 km thinning scheme. Subsequently, a 72 h cycling assimilation and forecast experiments are conducted for the WTMM and 120 km thinning schemes. It is found that the root mean square error (RMSE) profiles of temperature and humidity forecast fields with no thinning scheme are the largest at all pressure levels and forecast times. The temperature forecast error decreases after data thinning at altitudes below 300 hPa. Since the WTMM scheme has assimilated more observations than the 120 km scheme, the accuracy of its temperature and humidity forecast fields gradually increases with the forecast time. In terms of typhoon track and intensity forecast, the typhoon intensities are underestimated before landfall and overestimated after landfall for all thinning schemes. As the forecast time increases, the advantage of the WTMM is increasingly evident, with both the forecast intensity and track being closest to the actual observations. Similarly, the forecasted 24 h accumulated precipitation over land is overestimated after typhoon landfall compared with the IMERG Final precipitation products. The location of precipitation simulated by no thinning scheme is more westward overall. The forecast accuracy of the locations and intensities of severe precipitation cores and the typhoon’s outer spiral rain bands over the South China Sea has been improved after thinning. The Equitable Threat Scores (ETSs) of the WTMM thinning scheme are the highest for most precipitation intensity thresholds. Full article

Layer thickness uniformity critically influences the dimensional accuracy and mechanical performance of large-scale cementitious structures produced by material extrusion 3D printing. This study introduces a computer vision workflow that couples traditional preprocessing with a ResNet-50 convolutional neural network to automatically detect interlayer boundaries and quantify thickness variation. Hollow 50 × 50 × 50 mm specimens, printed from mixes optimized by void ratio (0.6–0.7) for fluidity and stackability, supplied 25 labeled RGB images for training and validation. The network achieved 96% training and 95% validation accuracy, generating boundary maps that required minimal linear interpolation. Pixel-based analysis yielded uniformity indices of 0.857–0.924, closely matching those from manual tracing (0.819–0.919) but with smaller standard deviations, indicating higher measurement stability and reduced sensitivity to lighting artifacts. The proposed method therefore provides an objective, reproducible alternative to labor-intensive manual evaluation and supports real-time prediction and control of dimensional errors during construction-scale 3D printing, advancing the precision and industrial applicability of additive manufacturing with cementitious composites. However, since this study was conducted under limited variable conditions, such as a simplified and repetitive experimental environment, a larger number of images will be required for model training to enable application under more general conditions. Full article

The growing market penetration of Electric Vehicles (EVs) requires very efficient bidirectional on-board chargers. These converters must allow the power transfer from the grid to the battery of the vehicle and vice versa, since Vehicle to Grid (V2G) applications enable a mitigation of the peak demand and help regulate both the voltage and the frequency of the grid. In this paper, an innovative double asymmetric modulation was studied and applied to a resonant Dual Active Bridge (DAB), CLLC resonant filter configuration. The results of the study showed a significant efficiency boost and an easier controllability of the converter with respect to more traditional modulations or variable frequency techniques, maintaining Zero-Voltage Switching (ZVS) conditions for all the switches in a wide operating range, from 28 to 100% of the maximum power (4–14 kW). A map of optimum points, where converter losses are minimized, is calculated offline through an algorithm in MATLAB R2024a and a proper interpolation between these points allows any output power for each possible voltage level of the battery to be achieved: from 250 V up to 400 V. The modulations are compared and evaluated through simulations carried out in PLECS, both offline and using hardware-in-the-loop (HIL), as well as through experimental tests. Full article

Industry 4.0, in its search for improvements to processes and efficient products, has increasingly invested in the use and development of high-performance materials for its production lines. This is exemplified by the introduction of CFRP in the aeronautical industry, since this composite material has reduced the weight of aircraft and improved their performance. For the construction of large structures, drilling processes are also necessary to fix parts. However, this machining process can cause failures in the structure as a whole. These structural failures occur due to fragmentation, tearing, or detachment of the matrix fiber, significantly reducing the quality and reliability of the final equipment. In this scenario, it is important to preventively detect these intrinsic production failures that lead to the condemnation of the final parts. One indirect detection method is acoustic emission. This work presents a feasibility study focused on the application of data-driven methods for delamination detection and tool wear monitoring in composite machining. A setup for a helical interpolation end-milling drilling process was performed under varying machining conditions, from mild to severe, on CFRP composite plates. Acoustic emission (AE) signals were acquired at each machining pass. The methodology involved selecting an optimal frequency band to obtain information about the wear of the drilling tool through RMS and power spectral density (PSD) analysis, followed by using correlation indices to characterize tool wear progression. The results demonstrate the potential of spectral and statistical techniques to support real-time monitoring and decision-making in advanced composite manufacturing. Full article

The inversion of shallow underground vibration fields primarily relies on signals collected by numerous sensors deployed on the surface. However, the accuracy of inversion is affected by the spatial distribution of these sensors. Therefore, under limited measurement points, signal reconstruction at unknown locations remains a critical challenge. To address this problem, we developed an SC-Net-based self-supervised interpolation method for missing wavefield data in shallow subsurface applications. This study utilizes incomplete seismic data acquired in real-world scenarios to train a neural network for seismic data interpolation, thereby expanding the sampled signals required for inversion. Since available seismic data samples are often scarce in practice, we adopt a hybrid training strategy combining simulated and real data. Specifically, a large number of numerically simulated samples are jointly trained with a limited set of real-world measurements. Furthermore, to enhance the robustness of network outputs, we integrate the Mean Teacher model framework and propose a self-supervised learning approach for missing data. Additionally, to enable the network to effectively capture long-range dependencies in both frequency and spatial domains of seismic data, we introduce a dual-branch feature fusion network that jointly models channel-wise and spatial relationships. Finally, in our actual field explosion experiments conducted at the test site, we demonstrated improved accuracy of our method through comparative analysis with several typical interpolation neural networks. Three ablation studies are also designed to demonstrate the effectiveness of the proposed approach. Full article

Since the early 1990s, satellite altimetry has significantly improved our understanding of coastal and estuarine dynamics. The Casamance estuary in Senegal exemplifies a tropical microtidal system with limited instrumentation despite pressing environmental, social, and navigational concerns. This study explores the potential of SWOT satellite data to support the calibration and validation of high-resolution hydrodynamic models. Multi-source dataset of in situ measurements and altimetry observations has been combined with numerical modelling to investigate the hydrodynamics in response to physical drivers. Statistical metrics were used to quantify model performance. Results show that SWOT accurately captures water level variations in the main channel (width 800 m to 5 km), including both tidal and non-tidal contributions, with high correlation (R = 0.90) and low error (RMSE < 0.25 m). Performance decreases in tributaries (R = 0.42, RMSE up to 0.34 m), due to interpolated bathymetry and complex local dynamics. Notably, Delft3D achieves R = 0.877 at Diogué (RMSE = 0.204 m) and R = 0.843 at Carabane (RMSE = 0.225 m). These findings highlight the strategic value of SWOT for improving hydrodynamic modelling in data-scarce estuarine environments. Full article

The regularization parameter plays an important role in regularization-based electrical tomography (ET) algorithms, but the existing methods generally cannot determine the parameter. Moreover, these methods are not real-time since a thorough search must be performed for the best parameter. To address the issue, a reproducing kernel-based interpolation approximation method is proposed to efficiently estimate the best regularization parameter from a group of representative samples. The optimization and generation of the new method have been verified by theoretical analysis and experimental demonstration. The theoretical evaluation is conducted in a Hilbert space with a known reproducing kernel, and its symmetry ensures the uniqueness of the interpolation. And experimental validation is carried out using both simulated and actual models, each with a range of distinct features. Results indicate that the new method can approximately find the best regularization parameter. Consequently, when using the regularization parameter, the new method can effectively improve both the spatial resolution and steadiness of ET imaging process. Full article

To accurately estimate Zenith Tropospheric Delay (ZTD) for high-precision positioning of the Global Navigation Satellite System (GNSS), this study proposes a modeling method of ZTD based on the UNB3m model and Kriging spatial interpolation, in which the optimal spatial interpolation parameters are determined based on the errors corresponding to different combinations of the interpolation parameters, and the spatial distribution of the GNSS modeling stations is determined by the interpolation errors of the randomly selected GNSS stations for several times. To verify the accuracy and reliability of the proposed model, the ZTD estimates of 132,685 epochs with 1 h or 2 h temporal resolution for 28 years from 1997 to 2025 of the global network of continuously operating GNSS tracking stations are used as inputs; the ZTD results at any position and the corresponding observation moment can be obtained with the proposed model. The experimental results show that the model error is less than 30 mm in more than 85% of the observation epochs, the ZTD estimation results are less affected by the horizontal position and height of the GNSS stations than traditional models, and the ZTD interpolation error is improved by 10–40 mm compared to the GPT3 and UNB3m models at the four GNSS checking stations. Therefore, this technology can provide ZTD estimation results for single- and dual-frequency hybrid deformation monitoring, as well as dense ZTD data for Precipitable Water Vapor (PWV) inversion. Since the proposed method has the advantages of simple implementation, high accuracy, high reliability, and ease of promotion, it is expected to be fully applied in other high-precision positioning applications. Full article

With the natural evolution of the Arctic route and advancements in related technologies, the development of new green ice-class ships is becoming a key technological breakthrough for the global shipbuilding industry. As a special vessel form that must perform icebreaking operations and undertake long-distance ocean voyages, an ice-class ship requires sufficient icebreaking capacity to navigate ice-covered water areas. However, since such ships operate for most of their time under open water conditions, it is also crucial to consider their resistance characteristics in these environments. Firstly, this paper employs linear interpolation to extract wind, wave, and sea ice data along the route and calculates the proportion of ice-covered and open water area in the overall voyage. This provides data support for hull form optimization based on real sea state conditions. Then, a resistance optimization platform for ice-class ships is established by integrating hull surface mixed deformation control within a scenario analysis framework. Based on the optimization results, comparative analysis is conducted between the parent hull and the optimized hull under various environmental resistance scenarios. Finally, the optimization results are evaluated in terms of energy consumption using a fuel consumption model of the ship’s main engine. The optimized hull achieves a 16.921% reduction in total resistance, with calm water resistance and wave-added resistance reduced by 5.92% and 27.6%, respectively. Additionally, the optimized hull shows significant resistance reductions under multiple wave and floating ice conditions. At the design speed, calm water power and hourly fuel consumption are reduced by 7.1% and 7.02%, respectively. The experimental results show that the hull form optimization process in this paper can take into account both ice-region navigation and ice-free navigation. The design ideas and solution methods can provide a reference for the design of ice-class ships. Full article

Classification of thyroid images based on the Bethesda category using Diff-Quick stained images can assist in diagnosing thyroid cancer. This paper proposes a cross-domain approach that modifies the original deep learning network designed to classify X-ray images to classify stained thyroid images. Since the Diff-Quick stained images have large and high-quality sizes with tiny cells with essential characteristics that can help a doctor diagnose, resizing images is required to maintain this characteristic, which is significant. Thus, in this paper, we also research and evaluate the performance of different interpolation methods, including linear and cubic interpolation. The experiment results evaluated on a private dataset present promising results in the thyroid image classification of the proposed approach. Full article

Atmospheric methane (CH₄) concentrations have increased to 2.5 times their pre-industrial levels, with a marked acceleration in recent decades. CH₄ is responsible for approximately 30% of the global temperature rise since the Industrial Revolution. This growing concentration contributes to environmental degradation, including ocean acidification, accelerated climate change, and a rise in natural disasters. The column-averaged dry-air mole fraction of methane (XCH₄) is a crucial indicator for assessing atmospheric CH₄ levels. In this study, the Sentinel-5P TROPOMI instrument was employed to monitor, map, and estimate CH₄ concentrations on both regional and global scales. However, TROPOMI data exhibits limitations such as spatial gaps and relatively coarse resolution, particularly at regional scales or over small areas. To mitigate these limitations, a novel Convolutional Neural Network Autoencoder (CNN-AE) model was developed. Validation was performed using the Total Carbon Column Observing Network (TCCON), providing a benchmark for evaluating the accuracy of various interpolation and prediction models. The CNN-AE model demonstrated the highest accuracy in regional-scale analysis, achieving a Mean Absolute Error (MAE) of 28.48 ppb and a Root Mean Square Error (RMSE) of 30.07 ppb. This was followed by the Random Forest (RF) regressor (MAE: 29.07 ppb; RMSE: 36.89 ppb), GridData Nearest Neighbor Interpolator (NNI) (MAE: 30.06 ppb; RMSE: 32.14 ppb), and the Radial Basis Function (RBF) Interpolator (MAE: 80.23 ppb; RMSE: 90.54 ppb). On a global scale, the CNN-AE again outperformed other methods, yielding the lowest MAE and RMSE (19.78 and 24.7 ppb, respectively), followed by RF (21.46 and 27.23 ppb), GridData NNI (25.3 and 32.62 ppb), and RBF (43.08 and 54.93 ppb). Full article

High production costs and extended development timelines pose significant challenges to the manufacturing of bearingless permanent magnet synchronous motors (BPMSMs). Moreover, uncertainties regarding the motor’s ability to generate suspension and torque often persist even after prototyping, primarily due to the limitations of lumped parameter models in capturing the system’s complex dynamics. Since this technology is not yet fully consolidated, there is a clear need for a solution that enables the effective evaluation of BPMSMs prior to physical production. To address this, a reduced-order model (ROM) was developed for BPMSMs with combined windings, capturing the cross-coupling effects associated with rotor eccentricity, magnetic saturation, and topological complexity. The model was constructed using the parametric interpolation method (PIM), enabling efficient and accurate representations of nonlinear electromechanical behavior as ferromagnetic materials and spatial harmonics are addressed through finite element modeling. Additionally, hardware-in-the-loop (HIL) techniques were used for gain tuning, and active disturbance rejection control (ADRC) was applied to enhance performance. This combined approach offers a comprehensive solution for the design and control of BPMSMs. Full article