Search Results (312)

The quantitative analysis of cardio selective beta-blockers, such as the antihypertensive and antiarrhythmic medication acebutolol (ABT), is critical for biomedical and environmental monitoring. This study describes the development of a high-performance electrochemical sensing platform for ABT based on a screen-printed carbon electrode (SPCE) modified with a silver nanoparticle/hexagonal boron nitride (Ag NPs/h-BN) nanocomposite. The morphological and structural properties of the synthesized materials were examined by using a microscopic and spectroscopic techniques. The Ag NPs/h-BN/SPCE demonstrated exceptional electrocatalytic activity toward ABT oxidation, characterized by a significant reduction in overpotential and a substantial enhancement in peak current relative to unmodified and mono-component electrodes. This superior performance is attributed to the synergistic integration of Ag NPs and h-BN, which provides a high density of active sites, an expanded electroactive surface area, and accelerated charge transfer kinetics. Under optimized experimental conditions, the sensor exhibited a broad linear dynamic range of 0.01–284 μM, a remarkably low limit of detection (LOD) of 0.0049 μM, and a high sensitivity of 0.873 µA µM⁻¹ cm⁻² for ABT detection. Furthermore, the platform displayed excellent selectivity in the presence of common interfering species and robust reproducibility (RSD of 4.8%). The practical utility of the Ag NPs/h-BN/SPCE was successfully validated through the precise quantification of ABT in complex biological and environmental matrices. This work provides a versatile strategy for the rational design of metal nanocatalysts confined within h-BN frameworks for the development of advanced electrochemical diagnostic tools. Full article

Rapid and accurate urea detection is of considerable importance in environmental monitoring and biomedical analysis, as abnormal urea levels are associated with water contamination and various health conditions. In this study, a silver nanoparticle-decorated graphene oxide (Ag/GO) composite was synthesized via a simple chemical reduction method. The characterization results confirmed the successful formation of well-crystalline Ag nanoparticles (7.44 ± 1.46 nm) with uniform dispersion on GO, with a Ag loading of 39.1 wt%. The electrochemical performance for urea detection was evaluated in an alkaline medium (0.1 M NaOH) using cyclic voltammetry and chronoamperometry in a three-electrode system. The Ag/GO-modified glassy carbon electrode exhibited a strong electrocatalytic response toward urea oxidation, with a linear detection range of 1–10 mM. The sensitivity and limit of detection (LOD) were 36.8 μA mM⁻¹ and 0.11 mM, respectively. The sensor also demonstrated excellent selectivity in the presence of common interfering species, including uric acid, ascorbic acid, and glucose, along with good reproducibility, repeatability, and stability. Furthermore, the practical applicability of the sensor was assessed in real samples, where satisfactory recovery was achieved in tap water, while reduced performance was observed in milk due to matrix effects. These findings indicate that the Ag/GO composite can serve as an effective alternative electrode material for non-enzymatic electrochemical detection of urea, particularly in wastewater and biological systems. Full article

Herein, an electrochemical sensor is reported for the first time based on an ordered macro–microporous composite derived from metal–organic frameworks (MOFs) for the highly sensitive detection of auramine O (AO), a Group 2B carcinogen. The hierarchical pore architecture, integrating an ordered macroporous network with a microporous ZIF-8 framework, enables the uniform dispersion of a high density of catalytically active sites. The interconnected macroporous channels facilitate efficient mass transport and rapid removal of reaction byproducts, effectively preventing pore blockage and ensuring stable sensing performance during repeated measurements. Owing to these structural advantages, the proposed sensor exhibits outstanding analytical performance toward AO detection, with a sensitivity of 0.4843 μA μM⁻¹, a detection limit of 0.168 μM (S/N = 3), and a wide linear range from 0.5 to 50 μM. Moreover, the sensor demonstrates excellent selectivity and reproducibility, maintaining reliable responses even in the presence of 100-fold excess common food constituents such as tartrazine and glucose. Real sample analysis further confirms its high accuracy and operational stability. Overall, the electrochemical sensor based on silver nanoparticle-decorated ordered macro–microporous ZIF-8 synthesized via in situ reduction shows great potential as a portable and on-site tool for rapid AO detection in food. More broadly, ordered macro–microporous MOF-derived materials represent a promising platform for advanced electrochemical sensor applications. Full article

This study presents the development of a low-cost H₂ gas sensor made from a titanium dioxide–zinc oxide composite by means of a simple, cost-effective screen-printing method. The sensing material was created by mixing titanium dioxide and zinc oxide nanoparticles with an organic binder, which was screen-printed onto a glass substrate containing silver electrodes. These samples were then characterized using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM). The XRD results confirmed that the films boasted well-defined crystallinity, with predominant anatase and hexagonal ZnO phases, as well as uniformity of grains. Sensor performance was evaluated in a custom-built chamber at hydrogen concentrations of 100 to 1000 ppm and at operating temperatures of 100 °C, 200 °C, and 300 °C. The results indicate improved sensor performance as the operating temperature increased to 300 °C, with the best sensitivity values of 0.99, 1.17, and 1.31 at hydrogen concentrations of 100, 500, and 1000 ppm, respectively. The sensor showed stable and reproducible response characteristics, and its responses were retimed after a few hundred seconds. Low-cost fabrication, ease of processing, and reliable sensor performance make titanium oxide–zinc oxide composites promising candidates for hydrogen detection. Full article

This study presents a straightforward process for producing a hybrid ternary composite of silver nanoparticles (Ag NPs), small graphene oxide (s-GO), and zirconia (ZrO₂) and its use as an electrode material for electrochemical sensing. The physico-chemical properties of the ternary composite were analyzed by means of field emission scanning electron microscopy (FE-SEM), ultraviolet-visible (UV-vis) and FTIR spectroscopy, X-ray Photoelectron Spectrometry (XPS) and contact angle (CA) measurements. The synthesized hybrid nanomaterial was employed as an electrode modifier in the fabrication of a modified screen-printed carbon electrode (SPCE) and used for the simultaneous electrochemical sensing of key environmental pollutants such as hydroquinone (HQ) and catechol (CAT). The developed sensor exhibited linearity in the range of 0–100 µM for both HQ and CAT, with sensitivity values of 2640 µA·mM⁻¹·cm⁻² for HQ and 5120 µA·mM⁻¹·cm⁻² for CAT. The limits of detection (LOD) were 1.5 µM for HQ and 0.72 µM for CAT, respectively. The synergistic enhancement of electron transfer kinetics, the increased electroactive surface area, the strong anti-interference capability, and excellent reproducibility and stability establish these modified electrodes as promising candidates for environmental monitoring and real sample analysis. Full article

Promoting the development of aerospace vehicles toward structural–functional integration and intelligent sensing is a key strategy for achieving lightweight, high-reliability, and autonomous operation and maintenance of next-generation aircraft. However, traditional external sensors face significant limitations because of their bulky size, installation challenges, and incompatibility with aerodynamic surfaces. These issues are particularly pronounced on complex, high-curvature substrates, where achieving conformal bonding is difficult, thus restricting their application in critical components. In this study, aerosol jet printing (AJP) was employed to directly fabricate silver nanoparticle-based temperature sensors with real-time monitoring capabilities on the surface of high-curvature stainless steel sleeves, which serve as typical engineering components. This approach enables the in situ manufacturing of high-precision conformal sensors. Through optimized structural design and thermal treatment, the sensors exhibit reliable temperature sensitivity. Microscopic characterization reveals that the printed sensors possess uniform linewidths and well-defined outlines. After gradient sintering at 250 °C, a dense and continuous conductive path is formed, ensuring strong adhesion to the substrate. Temperature-monitoring results indicate that the sensor exhibits a nearly linear resistance response (R² > 0.999) across a broad detection range of 20–200 °C. It also demonstrates high sensitivity, characterized by a temperature coefficient of resistance (TCR) of 2.15 × 10^−3/°C at 20 °C. In repeated thermal cycling tests, the sensor demonstrates excellent repeatability and stability over 100 cycles, with resistance fluctuations kept within 0.5% and negligible hysteresis observed. These findings confirm the feasibility of using AJP technology to fabricate high-performance conformal sensors on complex surfaces, offering a promising strategy for the development of intelligent structural components in next-generation aerospace engineering. Full article

Objective: We analyzed nanoparticle regulation research to examine the evolution of regulatory frameworks, identify major thematic structures, and evaluate current challenges in the governance of rapidly advancing nanotechnologies. By drawing parallels with the historical development of radiation regulation, the study aimed to contextualize emerging regulatory strategies and derive lessons for future governance. Methods: A total of 9095 PubMed-indexed articles published between January 2015 and October 2025 were analyzed using text mining, keyword frequency analysis, and topic modeling. Preprocessed titles and abstracts were transformed into a TF-IDF (Term Frequency–Inverse Document Frequency) document–term matrix, and NMF (Non-negative Matrix Factorization) was applied to extract semantically coherent topics. Candidate topic numbers (K = 1–12) were evaluated using UMass coherence scores and qualitative interpretability criteria to determine the optimal topic structure. Results: Six major research topics were identified, spanning energy and sensor applications, metal oxide toxicity, antibacterial silver nanoparticles, cancer nano-therapy, and nanoparticle-enabled drug and mRNA delivery. Publication output increased markedly after 2019 with interdisciplinary journals driving much of the growth. Regulatory considerations were increasingly embedded within experimental and biomedical research, particularly in safety assessment and environmental impact analyses. Conclusions: Nanoparticle regulation matured into a dynamic multidisciplinary field. Regulatory efforts should prioritize adaptive, data-informed, and internationally harmonized frameworks that support innovation while ensuring human and environmental safety. These findings provide a data-driven overview of how regulatory thinking was evolved alongside scientific development and highlight areas where future governance efforts were most urgently needed. Full article

Mercury’s severe toxicity and persistence demand fast, low-cost, and sustainable detection. In this work, a Juglans regia ethanolic extract is introduced as an efficient biogenic reducing and stabilizing agent for the green synthesis of silver nanoparticles (AgNPs). This plant-mediated route enables environmentally friendly nanoparticle formation with suitable optical properties for sensing applications. To overcome the poor visual selectivity observed in the colloidal AgNPs suspension, the nanoparticles were immobilized onto filter paper to produce a solid-phase colorimetric sensor. The paper-based platform exhibited a highly selective response toward Hg²⁺, showing complete suppression of the yellow coloration exclusively in the presence of Hg²⁺, even when challenged with a 200-fold excess of potentially interfering ions. Quantitative colorimetric analysis revealed a broad linear detection range from 1 × 10⁻⁸ to 1 × 10⁻³ mol dm⁻³ and an excellent limit of detection of 1.065 × 10⁻⁸ mol dm⁻³, with visible color changes consistent with the calculated values. The sensor’s performance was further validated using real tap water samples, with recovery values ranging from 96% to 102%, confirming minimal matrix interference and reliable quantification. Altogether, this study demonstrates that Juglans regia-mediated AgNPs, integrated into a simple paper-based format, provide a fully green, low-cost, and portable platform for sensitive and selective on-site detection of Hg²⁺ in environmental waters. Full article

Thanks to both endogenous and exogenous antioxidants (AOs), the antioxidant defense system ensures redox homeostasis, which is crucial for protecting the body from oxidative stress and maintaining overall health. The food industry also exploits the antioxidant properties to prevent or delay the oxidation of other molecules during processing and storage. There are many classical methods for assessing antioxidant capacity/activity, which are based on mechanisms such as hydrogen atom transfer (HAT), single electron transfer (SET), electron transfer with proton conjugation (HAT/SET mixed mode assays) or the chelation of selected transition metal ions (e.g., Fe²⁺ or Cu¹⁺). The antioxidant capacity (AOxC) index value can be expressed in terms of standard AOs (e.g., Trolox or ascorbic acid) equivalents, enabling different products to be compared. However, there is currently no standardized method for measuring AOxC. Nanoparticle sensors offer a new approach to assessing antioxidant status and can be used to analyze environmental samples, plant extracts, foodstuffs, dietary supplements and clinical samples. This review summarizes the available information on nanoparticle sensors as tools for assessing antioxidant status. Particular attention has been paid to nanoparticles (with a size of less than 100 nm), including silver (AgNPs), gold (AuNPs), cerium oxide (CeONPs) and other metal oxide nanoparticles, as well as nanozymes. Nanozymes belong to an advanced class of nanomaterials that mimic natural enzymes due to their catalytic properties and constitute a novel signal transduction strategy in colorimetric and absorption sensors based on the localized surface plasmon resonance (LSPR) band. Other potential AOxC sensors include quantum dots (QDs, <10 nm), which are particularly useful for the sensitive detection of specific antioxidants (e.g., GSH, AA and baicalein) and can achieve very good limits of detection (LOD). QDs and metallic nanoparticles (MNPs) operate on different principles to evaluate AOxC. MNPs rely on optical changes resulting from LSPR, which are monitored as changes in color or absorbance during synthesis, growth or aggregation. QDs, on the other hand, primarily utilize changes in fluorescence. This review aims to demonstrate that, thanks to its simplicity, speed, small sample volumes and relatively inexpensive instrumentation, nanoparticle-based AOxC assessment is a useful alternative to classical approaches and can be tailored to the desired aim and analytes. Full article

In this work, an eco-friendly 3D screen printing technique implemented in roll-to-roll technology for the manufacturing of flexible electronics is presented. The conductive ink was prepared through the decomposition of hydrogen peroxide, an eco-friendly reagent, onto the surfaces of silver nanoparticles. A biodegradable master pattern for screen printing was printed by 3D fused deposition modeling using a polylactic acid filament. This technique was implemented to fabricate hybrid touch-sensitive sensors, to be used as electrical switches, on both photographic and conventional office papers. The functionality of these sensors was demonstrated, and the systems were tested under aging and bending conditions, proving the reliability of this technological approach in flexible electronics and offering a biodegradable alternative. Full article

In this work, we investigated the influence of silver nanoparticle (AgNP) size (diameters of 20, 50, and 100 nm) and magnetic bead (MB) size (diameters from 100 to 4500 nm) on silver-gold galvanic exchange signal generation in magnetic electrochemical assays. Two conjugation strategies, including biotin-streptavidin interaction and a streptavidin-specific aptamer interaction, were compared to assess differences in binding chemistry and conjugation efficiency. Calibration studies showed that 50 nm diameter AgNPs provided the best sensitivity and galvanic exchange efficiency, yielding the lowest detection limits across both conjugation strategies. Larger AgNPs produced stronger signals but reached saturation rapidly, whereas smaller particles required higher concentrations to achieve equivalent silver content. Among MBs, 1000 nm beads consistently gave the highest galvanic exchange efficiency, offering sufficient surface area for AgNP loading while minimizing steric hindrance and electrode obstruction. These findings were confirmed by complementary electrochemical impedance spectroscopy, UV-Vis absorbance, and SEM imaging, which collectively demonstrated the strong influence of bead size on charge transfer resistance and conjugation efficiency. Overall, the combination of 50 nm AgNPs with 1000 nm MBs emerged as the optimal configuration, providing improved sensitivity and reproducibility. We believe these results offer valuable design guidelines for the development of next-generation aptamer-based electrochemical biosensors for biomarker detection. Full article

The progressive aging of the population requires reliable, non-invasive, and real-time tools to monitor hydration, prevent dehydration-related complications, and promote active aging in elderly patients. Wearable sensors based on interdigitated electrodes (IDEs) and on Electrochemical Impedance Spectroscopy (EIS) represent a promising tool thanks to their miniaturization, sensitivity to dielectric variations with humidity, and compatibility with flexible substrates. This study reports the design, fabrication, and metrological characterization of inkjet-printed IDEs for skin hydration monitoring, as a building block of a multisensor wearable device. IDEs were fabricated on polyimide substrates using silver nanoparticle-based ink. Their characterization involved the following: (i) morphological evaluation by scanning electron microscopy; (ii) EIS measurements in KCl solutions, leading to developing a regression model to correlate impedance with salt concentration; (iii) in vitro EIS validation on agar gel samples, which demonstrated a robust linear relationship between the impedance phase shift at 199.5 $\mathrm{Hz}$ and water loss, with consistent sensitivity values across sensors. The results confirm the feasibility of IDEs for hydration monitoring, identifying optimal frequency ranges and validating regression models. These findings represent a critical step toward the development of multisensor wearable devices for elderly monitoring, enabling decentralized and continuous health monitoring to improve healthcare sustainability and telemedicine. Full article

The integration of polymer coatings with metal and metal oxide nanoparticles represents a significant advancement in nanotechnology, enhancing the stability, biocompatibility, and functional versatility of these materials. These enhanced properties make polymer-coated nanoparticles key components in a wide range of applications, including biomedicine, catalysis, environmental remediation, electronics, and energy storage. The unique combination of polymeric materials with metal and metal oxide cores results in hybrid structures with superior performance characteristics, making them highly desirable for various technological innovations. Polymer-coated metal and metal oxide nanoparticles can be synthesized through various methods, such as grafting to, grafting from, grafting through, in situ techniques, and layer-by-layer assembly, each offering distinct control over nanoparticle size, shape, and surface functionality. The distinctive contribution of this review lies in its systematic comparison of polymer-coating synthesis approaches for different metal and metal oxide nanoparticles, revealing how variations in polymer architecture and surface chemistry govern their stability, functionality, and application performance. The aim of this paper is to provide a comprehensive overview of the current state of research on polymer-coated nanoparticles, including metals such as gold, silver, copper, platinum, and palladium, as well as metal oxides like iron oxide, titanium dioxide, zinc oxide, and aluminum oxide. This review highlights their design strategies, synthesis methods, characterization approaches, and diverse emerging applications, including biomedicine (e.g., targeted drug delivery, gene delivery, bone tissue regeneration, imaging, antimicrobials, and therapeutic interventions), environmental remediation (e.g., antibacterials and sensors), catalysis, electronics, and energy conversion. Full article

Silver nanoparticles (AgNPs) are extensively utilized in cosmetics and healthcare products, creating an urgent need for sensitive quantification methods. We report the first application of a metal–organic framework for electrochemical AgNPs sensing in cosmetic samples. A glassy carbon electrode was modified with polyethyleneimine-encapsulated MOF-235 (PEI-MOF-235/GCE); the PEI layer enriches AgNPs through Ag–N coordination, whereas the high-surface-area MOF catalyzes their oxidative dissolution. Under optimized conditions (catalyst loading 1.4 µg mm⁻³, pH 4.3 PBS), differential-pulse voltammetry provided a linear range of 10–100 ng L⁻¹ and a detection limit of 3.93 ng L⁻¹ (S/N = 3). The sensor exhibited excellent stability (RSD ≤ 4.7%) and good anti-interference capability toward common aquatic ions. Compared with a standard HPLC method, recoveries in spiked cosmetic samples were 97.9–102.6%. This MOF-based strategy offers a sensitive, selective, and field-deployable platform for routine monitoring of trace AgNPs. Full article

Accurate and early detection of alpha-fetoprotein (AFP) in human serum is essential for the diagnosis and monitoring of hepatocellular carcinoma and related diseases. In this study, we present a highly sensitive and reproducible quartz crystal microbalance (QCM) immunosensor for the quantitative detection of AFP. The detection strategy is based on a sandwich-type immunoassay coupled with a signal amplification method utilizing photocatalytic silver deposition on tungsten(IV) oxide (WO₃) nanoparticles. Since QCM detects resonance frequency shifts induced by mass changes on the sensor surface, the silver-enhanced growth of WO₃ nanoparticles enables significant signal amplification, allowing for precise mass-based quantification. Without amplification, the limit of detection (LOD) for AFP using the QCM immunosensor was 286 pg/mL, which was significantly improved to 43.7 pg/mL with photocatalytic silver staining. This approach markedly improves both sensitivity and reproducibility of the assay, offering a robust and efficient platform for clinical biomarker detection and early cancer diagnostics. Full article