Search Results (997)

Rolling bearings are indispensable but also the most fault-prone components of rotating machinery, typically used in fields such as industrial aircraft, production workshops, and manufacturing. They encounter diverse mechanical stresses, such as vibration and friction during operation, which may lead to wear and fatigue cracks. From this standpoint, the present study combined a 1-D convolutional neural network (1-D CNN) with a long short-term memory (LSTM) algorithm for classifying different ball-bearing health conditions. A physics-guided method that adopts fault characteristics frequencies was used to calculate an optimal input size (sample length). Moreover, grid search was utilized to optimize (1) the number of epochs, (2) batch size, and (3) dropout ratio and further enhance the efficacy of the proposed 1-D CNN-LSTM network. Therefore, an attempt was made to reduce epistemic uncertainty that arises due to not knowing the best possible hyper-parameter configuration. Ultimately, the effectiveness of the physics-guided optimized 1-D CNN-LSTM was tested by comparing its performance with other state-of-the-art models. The findings revealed that the average accuracies could be enhanced by up to 20.717% with the help of the proposed approach after testing it on two benchmark datasets. Full article

Accurate short-term precipitation forecasting (nowcasting) based on weather radar data is essential for managing weather-related risks, particularly in applications such as airport operations, urban flood prevention, and public safety during outdoor events. This study proposes a computationally efficient nowcasting method based on a Lagrangian advection scheme, estimating both the translation and rotation of radar-observed precipitation fields without relying on machine learning or resource-intensive computation. The method was tested on a two-year dataset (2022–2023) over Tuscany, using data collected from the Italian Civil Protection Department’s radar network. Forecast performance was evaluated using the Critical Success Index (CSI) and Mean Absolute Error (MAE) across varying spatial domains (1° × 1° to 2° × 2°) and precipitation regimes. The results show that, for high-intensity events (average rate > 1 mm/h), the method achieved CSI scores exceeding 0.5 for lead times up to 2 h. In the case of low-intensity rainfall (average rate < 0.3 mm/h), its forecasting skill dropped after 20–30 min. Forecast accuracy was shown to be highly sensitive to the temporal stability of precipitation intensity. The method performed well under quasi-stationary stratiform conditions, whereas its skill declined during rapidly evolving convective events. The method has low computational requirements, with forecasts generated in under one minute on standard hardware, and it is well suited for real-time application in regional meteorological centres. Overall, the findings highlight the method’s effective balance between simplicity and performance, making it a practical and scalable option for operational nowcasting in settings with limited computational capacity. Its deployment is currently being planned at the LaMMA Consortium, the official meteorological service of Tuscany. Full article

To investigate the remediation efficiency of different plant species on cadmium (Cd)-contaminated soil, this study conducted a pot experiment with two woody species (Populu adenopoda and Salix babylonica) and two herbaceous species (Artemisia argyi and Amaranthus hypochondriacus). Soils were collected from an abandoned coal mine and adjacent pristine natural areas within the dam-adjacent section of the Three Gorges Reservoir Area to establish three soil treatment groups: unpolluted soil (T1, 0.18 mg·kg⁻¹ Cd), a 1:1 mixture of contaminated and unpolluted soil (T2, 0.35 mg·kg⁻¹ Cd), and contaminated coal mine soil (T3, 0.54 mg·kg⁻¹ Cd). This study aimed to investigate the growth status of plants, Cd accumulation and translocation characteristics, and the relationship between them and soil environmental factors. Woody plants exhibited significant advantages in aboveground biomass accumulation. Under T3 treatment, the Cd extraction amount of S. babylonica (224.93 mg) increased by about 36 times compared to T1, and the extraction efficiency (6.42%) was significantly higher than other species. Among the herbaceous species, A. argyi showed the maximum Cd extraction amount (66.26 mg) and extraction efficiency (3.11%) during T2 treatment. While A. hypochondriacus exhibited a trend of increasing extraction amount but decreasing extraction efficiency with increasing concentration. With the exception of S. babylonica under T1 treatment (BCF = 0.78), the bioconcentration factor was greater than 1 in both woody (BCF = 1.39–6.42) and herbaceous species (BCF = 1.39–3.11). However, herbaceous plants demonstrated significantly higher translocation factors (TF = 1.58–3.43) compared to woody species (TF = 0.31–0.87). There was a significant negative correlation between aboveground phosphorus (P) content and root Cd (p < 0.05), while underground nitrogen (N) content was positively correlated to aboveground Cd content (p < 0.05). Soil total N and available P were significantly positively correlated with plant Cd absorption, whereas total potassium (K) showed a negative correlation. This study demonstrated that woody plants can achieve long-term remediation through biomass advantages, while herbaceous plants, with their high transfer efficiency, are suitable for short-term rotation. In the future, it is suggested to conduct a mixed planting model of woody and herbaceous plants to remediate Cd-contaminated soils in the tailing areas of reservoir areas. This would synergistically leverage the dual advantages of root retention and aboveground removal, enhancing remediation efficiency. Concurrent optimization of soil nutrient management would further improve the Cd remediation efficiency of plants. Full article

This study investigates the robustness of steel moment-resisting frames (MRFs) under column loss scenarios, both in undamaged and post-seismic conditions. In this context, robustness is defined as the ability of a damaged structure to prevent progressive collapse following an earthquake. A parametric investigation was conducted on 48 three-dimensional MRF configurations, varying key design and geometric parameters such as the number of storeys, span length, and design load combinations. Nonlinear dynamic analyses were performed using realistic ground motions and column loss scenarios defined by UFC guidelines. The effects of pre-existing seismic damage, façade claddings, and joint typologies were explicitly accounted for using validated component-based modelling approaches. The results indicate that long-span, low-rise frames are more vulnerable to collapse initiation due to higher plastic demands, while higher-rise frames benefit from load redistribution through their increased redundancy. In detail, long-span, low-rise frames experience roughly ten times higher displacement demands than their short-span counterparts, and post-seismic damage has limited influence, yielding rotational demands within 5–10% of the undamaged case. The Reserve Displacement Ductility (RDR) ranges from approximately 6.3 for low-rise, long-span frames to 21.5 for high-rise frames, highlighting the significant role of geometry in post-seismic robustness. The post-seismic damage was found to have a limited influence on the dynamic displacement and rotational demands, suggesting that the robustness of steel MRFs after a moderate earthquake is largely comparable to that of the initially undamaged structure. These findings support the development of more accurate design and retrofit provisions for seismic and multi-hazard scenarios. Full article

This paper focuses on the influence of torsional loading on the vibration-based unbalance fault diagnosis technology under variable-speed conditions. The coupled flexural–torsional nonstationary governing equations of motion are obtained and solved numerically. Taking the short-time chirp Fourier transform from the acceleration signal, which is determined from the numerical solutions, the influence of variable loading on the magnitude of the fundamental rotational harmonic—a diagnostic feature for conventional unbalance diagnosis technology—as well as its speed-invariant version for novel unbalance diagnosis technology is assessed. Numerical assessment shows that despite the stationary conditions, where the first rotational harmonic magnitude is independent from the torsional load, the conventional unbalance technology depends on the variable torsional load. However, the novel speed-invariant diagnostic technology is independent of the variable torsional load. The dependency of the conventional unbalance fault diagnosis technology on the variable torsional load and the independency of the novel speed-invariant unbalance diagnostic technology on the variable loading are justified by performing thorough experimental investigations on a variable-speed wind turbine with a permissible level of unbalance. Full article

The hydraulic turbine serves as the cornerstone of hydropower generation systems, with the sealing system’s performance critically influencing energy conversion efficiency and operational cost-effectiveness. The sealing ring is a pivotal component, which mitigates leakage and energy loss by regulating flow within the narrow gap between itself and the frame. This study investigates the intricate flow dynamics within the gap between the sealing ring and the upper frame of a super-large-scale Francis turbine, with a specific focus on the rotating wall’s impact on the flow field. Employing theoretical modeling and three-dimensional transient computational fluid dynamics (CFD) simulations grounded in real turbine design parameters, the research reveals that the rotating wall significantly alters shear flow and vortex formation within the gap. Tangential velocity exhibits a nonlinear profile, accompanied by heightened turbulence intensity near the wall. The short flow channel height markedly shapes flow evolution, driving the axial velocity profile away from a conventional parabolic pattern. Further analysis of rotation-induced vortices and flow instabilities, supported by turbulence kinetic energy monitoring and spectral analysis, reveals the periodic nature of vortex shedding and pressure fluctuations. These findings elucidate the internal flow mechanisms of the sealing ring, offering a theoretical framework for analyzing flow in microscale gaps. Moreover, the resulting flow field data establishes a robust foundation for future studies on upper crown gap flow stability and sealing ring dynamics. Full article

This study investigates how three technical factors—steering wheel tilt, torque, and cabin vibration frequency—affect driver posture. Heavy-truck drivers often suffer from musculoskeletal disorders (MSDs), mainly due to poor cabin ergonomics and prolonged postures during work. In countries like Ecuador, making major structural changes to cabin design is not feasible. These factors were identified through video analysis and surveys from drivers at two Ecuadorian trucking companies. An experimental system was developed using a simplified cabin to control these variables, while posture and muscle activity were recorded in 16 participants using motion capture, inertial sensors, and electromyography (EMG) on the upper trapezius, middle trapezius, triceps brachii, quadriceps muscle, and gastrocnemius muscle. The test protocol simulated key truck-driving tasks. Data were analyzed using ANOVA (${\displaystyle p<0.05}$), with technical factors and mass index as independent variables, and posture metrics as dependent variables. Results showed that head mass index significantly affected head abduction–adduction (${\displaystyle -}$8.12 to ${\displaystyle -}$2.18°), and spine mass index influenced spine flexion–extension (${\displaystyle -}$0.38 to 6.99°). Among technical factors, steering wheel tilt impacted trunk flexion–extension (${\displaystyle -}$13.56 to 16.99°) and arm rotation (${\displaystyle -}$31.1 to 19.7°). Steering wheel torque affected arm rotation (${\displaystyle -}$30.49 to ${\displaystyle -}$6.77°), while vibration frequency influenced forearm flexion–extension (3.76 to 16.51°). EMG signals showed little variation between muscles, likely due to the protocol’s short duration. These findings offer quantitative support for improving cabin ergonomics in low-resource settings through targeted, cost-effective design changes. Full article

Triboelectric nanogenerators (TENGs) hold significant potential for decentralized energy harvesting; however, their dependence on rotational mechanical energy often limits their ability to harness ubiquitous horizontal motion in real-world applications. Here, a single horizontal linear-to-rotational triboelectric nanogenerator (SHLR-TENG) is presented, designed to efficiently convert linear motion into rotational energy using a robust gear system, enabling a high voltage and reliable full cycle of alternating current (AC). The device features a radially patterned disk with triboelectric layers composed of polyimide. The SHLR-TENG achieves a peak-to-peak voltage of 1420 V, a short-circuit current of 117 µA, and an average power output of 41.5 mW, with a surface charge density of 110 µC/m². Moreover, it demonstrates a power density per unit volume of 371.2 W·m⁻³·Hz⁻¹. The device retains 80% efficiency after 1.5 million cycles, demonstrating substantial durability under mechanical stress. These properties enable the SHLR-TENG to directly power commercial LEDs and low-power circuits without the need for energy storage. This study presents an innovative approach to sustainable energy generation by integrating horizontal motion harvesting with rotational energy conversion. The compact and scalable design of the SHLR-TENG, coupled with its resilience to humidity (20–90% RH) and temperature fluctuations (10–70 °C), positions it as a promising next-generation energy source for Internet of Things (IoT) devices and autonomous systems. Full article

This study investigates the performance of medium-power wind turbines (within kilowatt range) in response to substantial fluctuations in wind speed. The wind turbines utilize induction generators that have a short-circuited rotor and are controlled by a power converter within the stator circuit. This configuration facilitates the adjustment of the stator frequency, thereby allowing the desired rotational speed to be achieved and guaranteeing that the turbine operates at the maximum power point (MPP). Specific mathematical models for the turbine and generator have been developed using technical data from an operational wind turbine. The study demonstrated that utilizing a power converter within the stator circuit enhances the turbine’s operation at its maximum power point. A crucial aspect of effective MPP operation is the accurate determination of the relationship between wind speed and the corresponding optimal angular mechanical speed. Precise understanding and implementation of the interdependence among the primary generator parameters—namely power, frequency, current, and power factor—in relation to wind speed is essential for maximizing power generation and achieving grid stability for wind turbines operating in variable wind speed. Full article

As designers push engine efficiency closer to thermodynamic limits, the analysis of flow instabilities developed in a high-pressure turbine (HPT) is crucial to minimizing aerodynamic losses and optimizing secondary air systems. Purge flow, while essential for protecting turbine components from thermal stress, significantly impacts the overall efficiency of the engine and is strictly connected to cavity modes and rim-seal instabilities. This paper presents an experimental investigation of these instabilities in an HPT stage, tested under engine-representative flow conditions in the short-duration turbine rig of the von Karman Institute. As operating conditions significantly influence instability behavior, this study provides valuable insight for future turbine design. Fast-response pressure measurements reveal asynchronous flow instabilities linked to ingress–egress mechanisms, with intensities modulated by the purge rate (PR). The maximum strength is reached at PR = 1.0%, with comparable intensities persisting for higher rates. For lower PRs, the instability diminishes as the cavity becomes unsealed. An analysis based on the cross-power spectral density is applied to quantify the characteristics of the rotating instabilities. The speed of the asynchronous structures exhibits minimal sensitivity to the PR, approximately 65% of the rotor speed. In contrast, the structures’ length scale shows considerable variation, ranging from 11–12 lobes at PR = 1.0% to 14 lobes for PR = 1.74%. The frequency domain analysis reveals a complex modulation of these instabilities and suggests a potential correlation with low-engine-order fluctuations. Full article

Be stars are characterized by the presence of a circumstellar Keplerian disk formed from material ejected from the rapidly rotating stellar surface. This article presents recent observational and theoretical progress on two central aspects of this phenomenon: the mechanisms driving mass loss, and the fate of the ejected material. Using simultaneous TESS photometry and ground-based spectroscopy, we examine the short-term variability associated with discrete mass ejection events, or “flickers”, and review strong evidence linking them to pulsational activity near the stellar surface. Complementary 3D hydrodynamic simulations reproduce key observational signatures and establish that disk formation requires compact and asymmetric ejection sites with sufficient angular momentum to overcome re-accretion. In systems with binary companions, new high-resolution simulations resolve the outer disk for the first time and identify five dynamically distinct regions, including a circumsecondary disk and a circumbinary spiral outflow. Together, these results provide a coherent framework that traces the full life cycle of disk material from pulsation-driven ejection near the stellar surface to its final destination, whether re-accreted by the companion or lost from the system entirely. Full article

As a core component of rotating machinery, the condition of rolling bearings is directly related to the reliability and safety of equipment operation; therefore, the accurate and reliable monitoring of bearing operating status is critical. However, when dealing with non-stationary and noisy vibration signals, traditional fault diagnosis methods are often constrained by limited feature characterization from single time–frequency analysis and inadequate feature extraction capabilities. To address this issue, this study proposes a lightweight fault diagnosis model (WaveCAResNet) enhanced with multi-source time–frequency features. By fusing complementary time–frequency features derived from continuous wavelet transform, short-time Fourier transform, Hilbert–Huang transform, and Wigner–Ville distribution, the capability to characterize complex fault patterns is significantly improved. Meanwhile, an efficient and lightweight deep learning model (WaveCAResNet) is constructed based on residual networks by integrating multi-scale analysis via a wavelet convolutional layer (WTConv) with the dynamic feature optimization properties of channel-attention-weighted residuals (CAWRs) and the efficient temporal modeling capabilities of weighted residual efficient multi-scale attention (WREMA). Experimental validation indicates that the proposed method achieves higher diagnostic accuracy and robustness than existing mainstream models on typical bearing datasets, and the classification performance of the newly proposed model exceeds that of state-of-the-art bearing fault diagnostic models on the same dataset, even under noisy conditions. Full article

Background: The methodology of ultrasound (US)-guided percutaneous neuromodulation (PNM) remains unclear. Objective: To determine the optimal stimulation frequency (3 Hz vs. 10 Hz) during the short-term application of US-guided PNM on the sciatic nerve, we assessed the therapeutic benefits, including pain reduction, hip passive internal rotation range of motion (IR-ROM), balance, and functionality, in patients with chronic low back pain (LBP). Methods: Forty patients with LBP were randomly assigned to two groups, each receiving isolated percutaneous electrical stimulation of the sciatic nerve. One group received stimulation at 3 Hz, while the other received stimulation at 10 Hz. Pain intensity, hip passive IR-ROM, hip muscle strength, and the Oswestry Disability Index (ODI) were measured before and one week after the intervention. Results: Both interventions significantly reduced pain and improved ROM, balance, and functionality after one week (p = 0.001). However, significant between-group (treatment × time) differences were observed for pain intensity (p = 0.001) and flexion strength in the non-intervention limb (p = 0.01), though the effect size was small (η² = 0.1). Conclusions: US-guided PNM applied to the sciatic nerve was more effective at 3 Hz than at 10 Hz in relieving pain intensity in patients with LBP. Full article

The morphology of blood vessels in retinal fundus images is a key biomarker for diagnosing conditions such as glaucoma, hypertension, and diabetic retinopathy. This study introduces a deep learning-based method for automatic blood vessel segmentation, trained from scratch on 44 clinician-annotated images. The proposed architecture integrates Bidirectional Long Short-Term Memory (Bi-LSTM) layers with dropout to mitigate overfitting. A distinguishing feature of this approach is the column-wise processing, which improves feature extraction and segmentation accuracy. Additionally, a custom data augmentation technique tailored for retinal images is implemented to improve training performance. The results are presented in their raw form—without post-processing—to objectively assess the method’s effectiveness and limitations. Further refinements, including pre- and post-processing and the use of image rotations to combine multiple segmentation outputs, could significantly boost performance. Overall, this work offers a novel and effective approach to the still unresolved task of retinal vessel segmentation, contributing to more reliable automated analysis in ophthalmic diagnostics. Full article

In real-world scenarios, the rotational speed of bearings is variable. Due to changes in operating conditions, the feature distribution of bearing vibration data becomes inconsistent, which leads to the inability to directly apply the training model built under one operating condition (source domain) to another condition (target domain). Furthermore, the lack of sufficient labeled data in the target domain further complicates fault diagnosis under varying operating conditions. To address this issue, this paper proposes a spatiotemporal feature fusion domain-adaptive network (STFDAN) framework for bearing fault diagnosis under varying operating conditions. The framework constructs a feature extraction and domain adaptation network based on a parallel architecture, designed to capture the complex dynamic characteristics of vibration signals. First, the Fast Fourier Transform (FFT) and Variational Mode Decomposition (VMD) are used to extract the spectral and modal features of the signals, generating a joint representation with multi-level information. Then, a parallel processing mechanism of the Convolutional Neural Network (SECNN) based on the Squeeze-and-Excitation module and the Bidirectional Long Short-Term Memory network (BiLSTM) is employed to dynamically adjust weights, capturing high-dimensional spatiotemporal features. The cross-attention mechanism enables the interaction and fusion of spatial and temporal features, significantly enhancing the complementarity and coupling of the feature representations. Finally, a Multi-Kernel Maximum Mean Discrepancy (MKMMD) is introduced to align the feature distributions between the source and target domains, enabling efficient fault diagnosis under varying bearing conditions. The proposed STFDAN framework is evaluated using bearing datasets from Case Western Reserve University (CWRU), Jiangnan University (JNU), and Southeast University (SEU). Experimental results demonstrate that STFDAN achieves high diagnostic accuracy across different load conditions and effectively solves the bearing fault diagnosis problem under varying operating conditions. Full article