Search Results (1,006)

Vertically oriented morphologies of the semiconducting metal oxide (SMO) surface provide a simple and effective means of enhancing gas sensor performance. We successfully synthesized explicitly aligned ZnO nanorods using a simple automated SILAR technique to improve acetone detection. In this work, we found that vertically oriented morphologies, such as well-aligned ZnO nanorods, can significantly enhance the sensor response due to an increase in specific active area and electron mobility, allowing a faster response to changes in the gas environment. The optimal operating temperature for our ZnO nanorod-based sensors in detecting acetone gas is 260 °C. At this temperature, the sensors exhibit a 96% response with a rapid response time of just 3 s. The improved sensing performance is attributed to both electronic and chemical sensitization mechanisms, which enhance the formation of active sites and shorten electron diffusion paths. Full article

Air–sea interactions play a pivotal role in shaping cyclone development and evolution. In this context, this study investigates the role of ocean optical properties and solar radiation penetration in modulating subsurface heat content and their subsequent influence on the intensity of Mediterranean cyclones. Using a regional coupled ocean–wave–atmosphere model, we conducted sensitivity experiments for Storm Daniel (2023) comparing two solar radiation penetration schemes in the ocean model component: one with a constant light attenuation depth and another with chlorophyll-dependent attenuation based on satellite estimates. Results show that the chlorophyll-driven radiative heating scheme consistently produces warmer sea surface temperatures (SSTs) prior to cyclone onset, leading to stronger cyclones characterized by deeper minimum mean sea-level pressure, intensified convective activity, and increased rainfall. However, post-storm SST cooling is also amplified due to stronger wind stress and vertical mixing, potentially influencing subsequent local atmospheric conditions. Overall, this work demonstrates that ocean bio-optical processes can meaningfully impact Mediterranean cyclone behavior, highlighting the importance of using appropriate underwater light attenuation schemes and ocean color remote sensing data in coupled models. Full article

In the industrial production of polytetrafluoroethylene (PTFE), accurately recognizing the liquid state within the coagulation vessel is critical to achieving better product quality and higher production efficiency. However, the complex and subtle changes in the coagulation process pose significant challenges for traditional sensing methods, calling for more reliable visual approaches that can handle varying scales and dynamic state changes. This study proposes a multi-branch deep learning framework for classifying the liquid state of PTFE emulsions based on high-resolution images captured in real-world factory conditions. The framework incorporates multi-scale feature extraction through a three-branch network and introduces a frequency–channel attention module to enhance feature discrimination. To address optimization challenges across branches, contrastive learning is employed for deep supervision, encouraging consistent and informative feature learning. The experimental results show that the proposed method significantly improves classification accuracy, achieving a mean F1-score of 94.3% across key production states. This work demonstrates the potential of deep learning-based visual classification methods for improving automation and reliability in industrial production. Full article

Falkland Islands English (FIE) began its development in the first half of the 19th century. In part, as a consequence of its youth, FIE is an understudied variety. It shares some morphosyntactic features with other anglophone countries in the Southern Hemisphere, but it also shares lexical features with regional varieties of Spanish, including Rioplatense Spanish. Che is one of many South American words that have entered FIE through Spanish, with its spelling ranging from “chay” and “chey” to “ché”. The word has received some marginal attention in terms of its meaning. It is said to be used in a similar way to the British dear or love and the Australian mate, and it has been compared to chum or pal, and is taken as an equivalent of the River Plate, hey!, hi!, or I say!. In this work, we explore the hypothesis that che entered FIE through historical contact with Rioplatense Spanish, drawing on both linguistic and sociohistorical evidence, and presenting survey, corpus, and ethnographic data that illustrate its current vitality, usage, and social meanings among FIE speakers. In situ observations, fieldwork, and an online survey were used to look into the vitality of che. Concomitantly, by crawling social media and the local press, enough data was gathered to build a small corpus to further study its vitality. A thorough literature review was conducted to hypothesise about the borrowing process involving its entry into FIE. The findings confirm that the word is primarily a vocative, it is commonly used, and it is indicative of a sense of belonging to the Falklands community. Although there is no consensus on the origin of che in the River Plate region, it seems to be the case that it entered FIE during the intense Spanish–English contact that took place during the second half of the 19th century. Full article

Accurate short-term rainfall forecasting, an essential component of the broader framework of nowcasting, is crucial for managing extreme weather events. Traditional forecasting approaches, whether radar-based or satellite-based, often struggle with limited spatial coverage or temporal accuracy, reducing their effectiveness. This study tackles these challenges by implementing the Local Analysis and Prediction System (LAPS) enhanced with a forward advection nowcasting module, integrating multiple remote sensing rainfall datasets. Specifically, we combine weather radar data with three different satellite-derived rainfall products (H-SAF, GPM, and TRMM) to assess their impact on nowcasting performance for a rainfall event in Attica, Greece (29–30 September 2018). The results demonstrate that combined high-resolution radar data with the broader coverage and high temporal frequency of satellite retrievals, particularly H-SAF, leads to more accurate predictions with lower uncertainty. The assimilation of H-SAF with radar rainfall retrievals (HX experiment) substantially improved forecast skill, reducing the unbiased Root Mean Square Error by almost 60% compared to the control experiment for the 60 min rainfall nowcast and 55% for the 90 min rainfall nowcast. This work validates the effectiveness of the specific LAPS/advection configuration and underscores the importance of multi-source data assimilation for weather prediction. Full article

High-resolution remote sensing imagery plays an essential role in urban management and environmental monitoring, providing detailed insights for applications ranging from land cover mapping to disaster response. Semantic segmentation methods are among the most effective techniques for comprehensive land cover mapping, and they commonly employ ImageNet-based pre-training semantics. However, traditional fine-tuning processes exhibit poor transferability across different downstream tasks and require large amounts of labeled data. To address these challenges, we introduce Denoising Diffusion Probabilistic Models (DDPMs) as a generative pre-training approach for semantic features extraction in remote sensing imagery. We pre-trained a DDPM on extensive unlabeled imagery, obtaining features at multiple noise levels and resolutions. In order to integrate and optimize these features efficiently, we designed a multi-layer perceptron module with residual connections. It performs channel-wise optimization to suppress feature redundancy and refine representations. Additionally, we froze the feature extractor during fine-tuning. This strategy significantly reduces computational consumption and facilitates fast transfer and deployment across various interpretation tasks on homogeneous imagery. Our comprehensive evaluation on the sparsely labeled dataset MiniFrance-S and the fully labeled Gaofen Image Dataset achieved mean intersection over union scores of 42.7% and 66.5%, respectively, outperforming previous works. This demonstrates that our approach effectively reduces reliance on labeled imagery and increases transferability to downstream remote sensing tasks. Full article

Nowadays, society is becoming increasingly committed to traveling by plane for work, tourism, and leisure in general. However, either due to internal, specific factors or to external determinants, like terrorism and climate changes, a growing number of travelers have experienced the so-called fear of flying, a persistent, irrational fear of flight-related situations for which a clear, efficacious therapy does not yet exist. Based on the usual interaction with the surrounding environment, conducted by means of the five human senses, and particularly on the neurophysiological pathway followed by the chemical senses, in this study, we revise the findings in the related literature on the topic, proposing an alternative way to alleviate the anxiety related to the fear of flight. This is based on chemosensory stimulation being applied directly during a flight and is possibly concerned with the consumption of meals, an usual activity performed onboard. After an introductory section aimed at understanding the problem, we present some studies related to chemosensory perception during the flight, highlighting the specificities of the scenarios, followed by a description of findings related to the meals proposed by flight companies in this context, and finally wrapping up the possible alternative approaches that could be conducted by such providers to alleviate the fear of flying condition through chemosensory stimulation vehiculated by meals, and enhance the quality of flight experience related to food consumption onboard. Full article

The Adaptive Skip-gram (AdaGram) algorithm extends traditional word embeddings by learning multiple vector representations per word, enabling the capture of contextual meanings and polysemy. Originally implemented in Julia, AdaGram has seen limited adoption due to ecosystem fragmentation and the comparative scarcity of Julia’s machine learning tooling compared to Python’s mature frameworks. In this work, we present a Python-based reimplementation of AdaGram that facilitates broader integration with modern machine learning tools. Our implementation expands the model’s applicability beyond natural language, enabling the analysis of scientific notation—particularly chemical and physical formulas encoded in LaTeX. We detail the algorithmic foundations, preprocessing pipeline, and hyperparameter configurations needed for interdisciplinary corpora. Evaluations on real-world texts and LaTeX-encoded formulas demonstrate AdaGram’s effectiveness in unsupervised word sense disambiguation. Comparative analyses highlight the importance of corpus design and parameter tuning. This implementation opens new applications in formula-aware literature search engines, ambiguity reduction in automated scientific summarization, and cross-disciplinary concept alignment. Full article

Electrochemical sensors, particularly those based on ion transfer at the interface between two immiscible electrolyte solutions (ITIES), offer significant advantages such as high selectivity, ease of fabrication, and cost effectiveness for toxic metal ion detection. However, distinguishing between cyclic voltammograms (CVs) of analytes with closely spaced half-wave potentials, such as Cd²⁺ and Cu²⁺, remains a challenge, especially for non-expert users. In this work, we present a novel methodology that integrates advanced artificial intelligence (AI) models with ITIES-based sensing to automate and enhance metal ion detection. Our approach first employed a convolutional neural network to classify CVs as either ideal or faulty with an accuracy exceeding 95 percent. Ideal CVs were then further analyzed for metal ion identification, achieving a classification accuracy of 99.15 percent between Cd²⁺ and Cu²⁺ responses. Following classification, an artificial neural network was used to quantitatively predict metal ion concentrations, yielding low mean absolute errors of 0.0158 for Cd²⁺ and 0.0127 for Cu²⁺. This integrated AI–ITIES system not only provides a scientific methodology for differentiating analyte responses based on electrochemical signatures but also substantially lowers the expertise barrier for sensor signal interpretation. To our knowledge, this is the first report of the AI-assisted differentiation and quantification of metal ions from ITIES-based CVs, establishing a robust framework for the future development of user-friendly, automated electrochemical sensing platforms for environmental and biological applications. Full article

Over the last couple of decades, philosophers have been drawing on ideas from Wittgenstein’s late work On Certainty in developing an approach to epistemology known as “hinge epistemology.” Hinge epistemology has been of particular interest to philosophers of religion because it considers the role that deep commitments to particular propositions may have within epistemic life, arguably mirroring what is seen in some religious traditions. The issue that motivates the present article is whether or to what extent it is helpful to think of forms of atheism as being grounded in hinge commitments. After considering various forms of atheism, this article advances the view that there are some forms of atheism that do exhibit core grounding commitments that may be helpfully interpreted as hinges. In developing this argument, the article considers two case studies of apparent atheistic hinges: the “secular faith” of Martin Hägglund and expressions of atheism one may find in contemporary Chinese society. While many atheistic beliefs are contingent upon still more fundamental epistemic commitments, some forms of atheism may be held strongly or with such a sense of import that interpretation by means of the notion of hinge commitment will be illuminating. Full article

Background/Objectives: Burnout and anger are prevalent among healthcare professionals in high-stress environments, particularly in addiction services. This study explores the relationship between burnout and anger among 124 operators working in public addiction services (SERD) in Calabria and Sicily. The objective is to assess how different anger dimensions contribute to burnout and identify protective factors that could inform targeted interventions. Methods: The sample consisted of 58 men and 66 women, with a mean age of 39.2 years (SD = 9.8), ranging from 25 to 59 years old. Burnout was measured using the Maslach Burnout Inventory (MBI), assessing emotional exhaustion, depersonalization, and personal accomplishment. Anger was evaluated through the State-Trait Anger Expression Inventory-2 (STAXI-2), examining trait anger, state anger, anger expression (anger-in, anger-out), and anger control. A cross-sectional design was used, with correlation and regression analyses controlling for gender and years of service. Results: High levels of burnout, particularly emotional exhaustion and depersonalization, were found. Emotional exhaustion correlated strongly with trait anger, indicating that individuals with a chronic predisposition to anger are more vulnerable to burnout. Suppression of anger (anger-in) significantly predicted depersonalization, exacerbating emotional disengagement from patients. Conversely, anger control acted as a protective factor, helping maintain a sense of personal accomplishment. Conclusions: These findings underscore the importance of emotional regulation in mitigating burnout among addiction service workers. Interventions such as emotional regulation training and anger management programs could help reduce psychological distress and promote resilience. Workplace strategies that support emotional well-being may improve both staff retention and patient care quality. Further research should explore longitudinal trends and intervention effectiveness. Full article

Lithium batteries have become one of the best choices for current consumer electric vehicle batteries due to their good stability and high energy density. To ensure the safety and reliability of electric vehicles (EVs), the battery management system (BMS) must provide accurate and real-time information on the usage status of the onboard battery. This article highlights the precise estimation of the state of charge (SOC) applied to four models of lithium-ion batteries (Turnigy, LG, SAMSUNG, and PANASONIC) for electric vehicles in order to ensure optimal use of the battery and extend its lifespan, which is frequently influenced by certain parameters such as temperature, current, number of charge and discharge cycles, and so on. Because of the work’s novelty, the methodological approach combines the extended Kalman filter algorithm (EKF) with the noise matrix, which is updated in this case through an iterative process. This leads to the migration to a new adaptive extended Kalman filter algorithm (AEKF) in the MATLAB Simulink 2022.b environment, which is novel or original in the sense that it has a first-order association. The four models of batteries from various manufacturers were directly subjected to the Venin estimator, which allowed for direct comparison of the models under a variety of temperature scenarios while keeping an eye on performance metrics. The results obtained were mapped charging status (SOC) versus open circuit voltage (OCV), and the high-performance primitives collection (HPPC) tests were carried out at 40 °C, 25 °C, 10 °C, 0 °C and −10 °C. At these temperatures, their corresponding values for the root mean square error (RMSE) of (SOC) for the Turnigy graphene battery model were found to be: 1.944, 9.6237, 1.253, 1.6963, 16.9715, and for (OCV): 1.3154, 4.895, 4.149, 4.1808, and 17.2167, respectively. The tests cover the SOC range, from 100% to 5% with four different charge and discharge currents at rates of 1, 2, 5 and 10 A. After characterization, the battery was subjected to urban dynamometer driving program (UDDS), Energy Saving Test (HWFET) driving cycles, LA92 (Dynamometric Test), US06 (aggressive driving), as well as combinations of these cycles. Driving cycles were sampled every 0.1 s, and other tests were sampled at a slower or variable frequency, thus verifying the reliability and robustness of the estimator to 97%. Full article

This study investigates a noninvasive continuous glucose monitoring (NI-CGM) system optimized for earlobe application, leveraging the site’s anatomical advantages—absence of bone, muscle, and thick skin—for enhanced optical transmission. The system integrates multimodal sensing, combining near-infrared (NIR) diffuse transmission with temperature and pressure sensors. A novel Multi-Wavelength Slope Efficiency Near-Infrared Spectroscopy (MW-SE-NIRS) method is introduced, enhancing noise robustness through the slope efficiency-based parameterization of NIR signal dynamics. By employing three NIR wavelengths with distinct scattering and absorption properties, the method improves glucose detection reliability, addressing tissue heterogeneity and physiological noise in noninvasive monitoring. To validate the feasibility, a pilot clinical trial enrolled five participants with normal or pre-diabetic glucose profiles. Continuous glucose data capturing pre- and postprandial variations were analyzed using a 1D convolutional neural network (Conv1D). For three subjects under stable physiological conditions, the model achieved 97.0% Clarke error grid (CEG) A-Zone accuracy and a mean absolute relative difference (MARD) of 5.2%. Across all participants, results showed 90.9% CEG A-Zone accuracy and a MARD of 8.4%, with performance variations linked to individual factors such as earlobe thickness variability and physical activity. These outcomes demonstrate the potential of the MW-SE-NIRS system for noninvasive glucose monitoring and highlight the importance of future work on personalized modeling, sensor optimization, and larger-scale clinical validation. Full article

In fiber Bragg grating (FBG) sensing demodulation systems, high-precision peak detection is a core requirement for demodulation algorithms. However, practical spectral signals are often susceptible to environmental noise interference, which leads to significant degradation in the accuracy of traditional demodulation methods. This study proposes a self-adaptive K-SVD (SAK-SVD) denoising algorithm based on adaptive window parameter optimization, establishing a closed-loop iterative feedback mechanism through dual iterations between dictionary learning and parameter adjustment. This approach achieves a synergistic enhancement of noise suppression and signal fidelity. First, a dictionary learning framework based on K-SVD is constructed for initial denoising, and the peak feature region is extracted by differentiating the denoised signals. By constructing statistics on the number of sign changes, an adaptive adjustment model for the window size is established. This model dynamically tunes the window parameters in dictionary learning for iterative denoising, establishing a closed-loop architecture that integrates denoising evaluation with parameter optimization. The performance of SAK-SVD is evaluated through three experimental scenarios, demonstrating that SAK-SVD overcomes the rigid parameter limitations of traditional K-SVD in FBG spectral processing, enhances denoising performance, and thereby improves wavelength demodulation accuracy. For denoising undistorted waveforms, the optimal mean absolute error (MAE) decreases to 0.300 pm, representing a 25% reduction compared to the next-best method. For distorted waveforms, the optimal MAE drops to 3.9 pm, achieving a 63.38% reduction compared to the next-best method. This study provides both theoretical and technical support for high-precision fiber-optic sensing under complex working conditions. Crucially, the SAK-SVD framework establishes a universal, adaptive denoising paradigm for fiber Bragg grating (FBG) sensing. This paradigm has direct applicability to Raman spectroscopy, industrial ultrasound-based non-destructive testing, and biomedical signal enhancement (e.g., ECG artefact removal), thereby advancing high-precision measurement capabilities across photonics and engineering domains. Full article

Deviance is defined as actions that are opposed to generally accepted norms or violate acceptable behaviours within a society. Much of the deviant literature emphasises how the divergence from acceptable standards or behaviour is deviant. However, this begs the question: what happens when an acceptable norm is unethical or ought to be? In response, this entry calls into question the work-chop phenomenon in Nigeria. The work-chop phenomenon supports using dishonest means for personal gain. It is promoted via a repetitive statement that appeals to the listeners’ cognition and sentiments. Its prevalence makes it a norm in some sense, so defining deviance from a Western perspective alone leaves room for this nuanced phenomenon to go unnoticed in the literature. Based on secondary research and normative ethical theories, the authors argue that work-chop is ethical deviance because its means and ends are not mutually beneficial to the parties involved. Full article