Search Results (2,011)

Genu valgum (GV) is a common lower limb deformity that may increase the risk of anterior cruciate ligament (ACL) injury. This study used OpenSim musculoskeletal modeling and kinematic analysis to investigate the mechanical responses of the ACL under fatigue in females with GV. Eight females with GV and eight healthy controls completed a running-induced fatigue protocol. Lower limb kinematic and kinetic data were collected and used to simulate stress and strain in the anteromedial ACL (A–ACL) and posterolateral ACL (P–ACL) bundles, as well as peak joint angles and knee joint stiffness. The results showed a significant interaction effect between group and fatigue condition on A–ACL stress. In the GV group, A–ACL stress was significantly higher than in the healthy group both before and after fatigue (p < 0.001) and further increased following fatigue (p < 0.001). In the pre-fatigued state, A–ACL strain was significantly higher during the late stance phase in the GV group (p = 0.036), while P–ACL strain significantly decreased post-fatigue (p = 0.005). Additionally, post-fatigue peak hip extension and knee flexion angles, as well as pre-fatigue knee abduction angles, showed significant differences between groups. Fatigue also led to substantial changes in knee flexion, adduction, abduction, and hip/knee external rotation angles within the GV group. Notably, knee joint stiffness in this group was significantly lower than in controls and decreased further post-fatigue. These findings suggest that the structural characteristics of GV, combined with exercise-induced fatigue, exacerbate A–ACL loading and compromise knee joint stability, indicating a higher risk of ACL injury in fatigued females with GV. Full article

When measuring Stokes parameters using the rotating wave plate method, the angle error of the polarizer’s light transmission axis, the azimuth error of the wave plate’s fast axis, and the phase delay error are key factors restricting accuracy. To address the existing calibration methods’ insufficient accuracy and incomplete consideration of the error parameters, this study constructed an error-transfer analytical model for an in-depth analysis of the principle of measuring Stokes parameters using the rotating wave plate method. It also clarified the quantitative parameter relationship between the measurement, wave plate, and polarizer errors. A device parameter calibration scheme using multi-angle polarized light (horizontally linearly polarized, [1,1,0,0]^T, and 45° linearly polarized, [1,0,1,0]^T) was further proposed, and by using the deviation between the theoretical response of the standard incident light and the actual measurement data, an error equation was established to solve the device parameter error and precisely calibrate the polarization detection device. The experimental results show that after using this method, the calibration error of the Stokes parameters decreased from 4.83% to within 0.46%, significantly overcoming the traditional methods’ limitations regarding incomplete consideration of the error parameters and accuracy improvement, providing a more concise and reliable method for high-precision polarization measurement. Full article

Analyzing the two-phase flow behavior in bearing lubrication is crucial for understanding friction and wear mechanisms, optimizing lubrication design, and improving bearing operational efficiency and reliability. However, the complexity of oil–air two-phase flow in high-speed bearings poses significant research challenges. Currently, there is a lack of comparative studies employing different simulation strategies to address this issue, leaving a gap in evidence-based guidance for selecting appropriate simulation approaches in practical applications. This study begins with a comparative analysis between experimental and simulation results to validate the reliability of the adopted simulation approach. Subsequently, a comparative evaluation of different simulation methods is conducted to provide a scientific basis for relevant decision-making. Evaluated from three dimensions—adaptability to rotational speed conditions, research focuses (oil distribution and power loss), and computational economy—the findings reveal that FVM excels at medium-to-high speeds, accurately predicting continuous oil film distribution and power loss, while MPS, leveraging its meshless Lagrangian characteristics, demonstrates superior capability in describing physical phenomena under extreme conditions, albeit with higher computational costs. Economically, FVM, supported by mature software ecosystems and parallel computing optimization, is more suitable for industrial design applications, whereas MPS, being more reliant on high-performance hardware, is better suited for academic research and customized scenarios. The study further proposes that future research could adopt an FVM-MPS coupled approach to balance efficiency and precision, offering a new paradigm for multi-scale lubrication analysis in bearings. Full article

This study investigates a modified five-dimensional chaotic system by incorporating structural term adjustments and Caputo fractional-order differential operators. The modified system exhibits significantly enriched dynamic behaviors, including offset boosting, phase trajectory rotation, phase trajectory reversal, and contraction phenomena. Additionally, the system exhibits bidirectional transitions—conservative-to-dissipative transitions governed by initial conditions and dissipative-to-conservative transitions controlled by fractional order variations—along with a unique chaotic-to-quasiperiodic transition observed exclusively at low fractional orders. To validate the system’s physical realizability, a signal processing platform based on Digital Signal Processing (DSP) is implemented. Experimental measurements closely align with numerical simulations, confirming the system’s feasibility for practical applications. Full article

Tillage is a major factor influencing soil biological communities, particularly earthworms, which play a key role in soil structure and nutrient cycling. To address soil degradation, less-intensive tillage practices are increasingly being adopted globally and have shown positive effects on earthworm populations when applied consistently over extended periods. However, understanding of the earthworm population dynamics in the period following the implementation of changes in tillage practices remains limited. This three-year field study (2021–2023) investigates earthworm populations during the early transition phase (4–6 years) following the conversion from conventional ploughing to conservation (<8 cm depth, with residue retention) and no-tillage systems in a temperate arable system in central Slovenia. Earthworms were sampled annually in early October from three adjacent fields, each following the same three-year crop rotation (maize—winter cereal + cover crop—soybeans), using a combination of hand-sorting and allyl isothiocyanate (AITC) extraction. Results showed that reduced tillage practices significantly increased both earthworm biomass and abundance compared to conventional ploughing. However, a significant interaction between tillage and year was observed, with a sharp decline in earthworm abundance and mass in 2022, likely driven by a combination of 2022 summer tillage prior to cover crop sowing and extreme drought conditions. Juvenile earthworms were especially affected, with their proportion decreasing from 62% to 34% in ploughed plots and from 63% to 26% in conservation tillage plots. Despite interannual fluctuations, no-till showed the lowest variability in earthworm population. Long-term monitoring is essential to disentangle management and environmental effects and to inform resilient soil management strategies. Full article

Addressing the need for contact load detection in wind turbine main bearings during service, a roller contact load measurement method is proposed. An analytical model characterizes the contact load-to-inner bore strain mapping relationship. To overcome the inherent low sensitivity of direct bore strain measurement, bore-to-measurement-point sensitivity analysis was optimized. Multiple structurally optimized sensor brackets were designed to enhance strain measurement sensitivity, and their performance was comparatively evaluated via simulation. To mitigate sensitivity fluctuations caused by roller rotation phase variations, a strain–phase–load calculation method incorporating real-time phase compensation was developed and verified through simulation analysis. A dedicated roller contact load testing system was constructed and experimental validation was conducted. Results demonstrate 95% accuracy in contact load acquisition. This method accurately obtains roller contact loads in wind turbine main bearings, proving crucial for studying bearing mechanical behavior, predicting fatigue life, optimizing structural design, and enhancing reliability. Full article

Drones can improve the efficiency of point-to-point logistics and distribution and reduce labor costs; however, the complex three-dimensional airspace environment poses significant challenges for flight paths. To address this demand, this paper proposes a hybrid algorithm that integrates the Sparrow Search Algorithm (SSA) with the African Vulture Optimization Algorithm (AVOA). Firstly, the algorithm introduces Sobol sequences at the population initialization stage to optimize the initial population; then, we incorporate SSA’s discoverer and vigilant mechanisms to balance exploration and exploitation and enhance global exploration capabilities; finally, multi-guide differencing and dynamic rotation transformation strategies are introduced in the first exploitation phase to enhance the direction of local exploitation by fusing multiple pieces of information; the second exploitation phase achieved a dynamic balance between elite guidance and population diversity through adaptive weight adjustment and enhanced Lévy flight strategy. In this paper, a three-dimensional model is built under a variety of constraints, and SAVOA (Sparrow-Enhanced African Vulture Optimization Algorithm) is compared with a variety of popular algorithms in simulation experiments. SAVOA achieves the optimal path in all scenarios, verifying the efficiency and superiority of the algorithm in UAV logistics path planning. Full article

Background/Objectives: Rotator cuff calcific tendinopathy (RCCT) is one of the most common causes of non-traumatic shoulder pain. To date, there is still no consensus regarding the most effective method for its treatment. Ultrasound-guided percutaneous aspiration is suggested during the reabsorption phase of calcific metaplasia. We aimed to evaluate the effectiveness of ultrasound-guided lavage for RCCT from a clinical and radiological perspective. Methods: We involved patients affected by RCCT of the supraspinatus tendon. The approach used for the calcification lavage was the one-needle technique, consisting in inserting a 16–18 G needle on a 20 mL syringe with 0.9% saline solution, in the calcific metaplasia, under ultrasound guidance, using an in-plane approach; the repetitive action of pressing and releasing the plunger was repeated until the contents of the syringe became milky, at which point the syringe was replaced with a new one, always containing saline solution. The physiotherapy treatment began 7 days after the procedure. We assessed the Numeric Rating Scale, the Gartner classification, the Disability of the Arm, Shoulder and Hand scale, the Constant–Murley shoulder score, and the passive range of motion of flexion and abduction. Results: We included 23 subjects. The analysis of the data at baseline and t1 showed a statistically significant improvement in all the functional variables (p < 0.05). This result was mainly evident for pain, with a p-value of 0.001. Conclusions: The findings of the present prospective case series study showed an improvement in the clinical and radiological outcomes after ultrasound-guided percutaneous aspiration for rotator cuff calcific tendinopathy. Full article

During the COVID-19 pandemic, some studies suggested that transmission events could originate from schools. This study aimed to evaluate early-warning methods for identifying asymptomatic COVID-19 cases by implementing screening programs in schools. This study was conducted between September 2021 and May 2023, employing a rotation-screening plan for COVID-19 detection on a sample of students aged 14 to 19 years attending secondary schools in the regions of Tuscany, Veneto, Apulia and Friuli-Venezia Giulia. The schools were divided into two groups: experimental and control, with a ratio of 1:2. Two types of molecular salivary tests for SARS-CoV-2 were used to conduct the screening. This study included 16 experimental schools and 32 control schools. Out of 2527 subjects, 11,475 swabs were administrated, with 9177 tests deemed valid for analysis (a 20% loss of tests). Among these, 89 subjects (3.5%) tested positive. In control schools, 1895 subjects (6.5%) tested positive for SARS-CoV-2. This study recorded peaks in infections during the winter and autumn months, consistent with patterns observed in the general population. Beginning in September 2022, a shift occurred, with 2.6% of positive cases reported in the case schools compared to 0.3% in the control schools. Initially, most cases of COVID-19 were detected in the control schools; however, as the pandemic emergency phase concluded, cases were primarily identified through active screening in experimental schools. Although student participation in the active screening campaign was low during the project’s extension phase, this approach was efficacious in the early identification of positive cases. Full article

Bio-based polyurethane asphalt binder (PUAB) derived from castor oil (CO) is environmentally friendly and exhibits extended allowable construction time. However, CO imparts inherently poor mechanical performance to bio-based PUAB. To address this limitation, attapulgite (ATT) with fibrous nanostructures was incorporated. The effects of ATT on bio-based PUAB were systematically investigated, including cure kinetics, rotational viscosity (RV) evolution, phase-separation microstructures, dynamic mechanical properties, thermal stability, and mechanical performance. Experimental characterization employed Fourier transform infrared spectroscopy, Brookfield viscometry, laser scanning confocal microscopy, dynamic mechanical analysis, thermogravimetry, and tensile testing. ATT incorporation accelerated the polyaddition reaction conversion between isocyanate groups in polyurethane (PU) and hydroxyl groups in ATT. Paradoxically, it reduced RV during curing, prolonging allowable construction time proportionally with clay content. Additionally, ATT’s compatibilizing effect decreased bitumen particle size in PUAB, with scaling proportionally with clay loading. While enhancing thermal stability, ATT lowered the glass transition temperature and damping properties. Crucially, 1 wt% ATT increased tensile strength by 71% and toughness by 62%, while maintaining high elongation at break (>400%). The cost-effectiveness and significant reinforcement capability of ATT make it a promising candidate for producing high-performance bio-based PUAB composites. Full article

The general framework of Entropic Dynamics (ED) is used to construct non-relativistic models of relational Quantum Mechanics from well-known inference principles—probability, entropy and information geometry. Although only partially relational—the absolute structures of simultaneity and Euclidean geometry are still retained—these models provide a useful testing ground for ideas that will prove useful in the context of more realistic relativistic theories. The fact that in ED the positions of particles have definite values, just as in classical mechanics, has allowed us to adapt to the quantum case some intuitions from Barbour and Bertotti’s classical framework. Here, however, we propose a new measure of the mismatch between successive states that is adapted to the information metric and the symplectic structures of the quantum phase space. We make explicit that ED is temporally relational and we construct non-relativistic quantum models that are spatially relational with respect to rigid translations and rotations. The ED approach settles the longstanding question of what form the constraints of a classical theory should take after quantization: the quantum constraints that express relationality are to be imposed on expectation values. To highlight the potential impact of these developments, the non-relativistic quantum model is parametrized into a generally covariant form and we show that the ED approach evades the analogue of what in quantum gravity has been called the problem of time. Full article

We propose a single-phase chiral elastic metamaterial capable of simultaneously exhibiting negative effective mass density and negative bulk modulus in the ultrasonic frequency range. The unit cell consists of a regular hexagonal frame connected to a central circular mass through six obliquely oriented, slender aluminum beams. The design avoids the manufacturing complexity of multi-phase systems by relying solely on geometric topology and chirality to induce dipolar and rotational resonances. Dispersion analysis and effective parameter retrieval confirm a double-negative frequency region from 30.9 kHz to 34 kHz. Finite element simulations further demonstrate negative refraction behavior when the metamaterial is immersed in water and subjected to 32 kHz and 32.7 kHz incident plane wave. Equifrequency curves (EFCs) analysis shows excellent agreement with simulated refraction angles, validating the material’s double-negative performance. This study provides a robust, manufacturable platform for elastic wave manipulation using a single-phase metallic metamaterial design. Full article

For transmission systems with regular order excitation, the order vibration will be conducted to each component of the system and affect the stability and service life of the system. A method with a regular non-circular active pulley is proposed in this paper, which is used to counteract the regular order excitation and the regular load excitation. A toothed belt drive system with second-order excitation is taken as an example. According to the existing analytical model of the tooth belt drive system, the modeling process and analytical solution algorithm of the system are derived. Based on the coordinate transformation, the algorithms for any position of an elliptical pulley and the common tangent of the circular pulley are given. And the algorithm for the arc length of the elliptical pulley at any arc degree is proposed. The influence of the phase and eccentricity in the elliptical pulley on the dynamic performance of the system is analyzed. Then the experimental verification is carried out. This shows that this system can generate excitation opposite to the main order rotational vibration of the driving pulley and opposite to the load of the driven pulley. Under the combined effect of other load pulleys in the system, there will be an amplification phenomenon in its vibration response. Considering the decrease in the belt span tension and the decline in the performance of energy-absorbing components after long operation, the presented method can better maintain the stability of system performance. This method can provide new ideas for the vibration reduction optimization process of systems with first-order wave excitation. Full article

Medical image registration is an indispensable preprocessing step to align medical images to a common coordinate system before in-depth analysis. The registration precision is critical to the following analysis. In addition to representative image features, the initial pose settings and multiple poses in images will significantly affect the registration precision, which is largely neglected in state-of-the-art works. To address this, the paper proposes a dual-pose medical image registration algorithm based on improved differential evolution. More specifically, the proposed algorithm defines a composite similarity measurement based on contour points and utilizes this measurement to calculate the similarity between frontal–lateral positional DRR (Digitally Reconstructed Radiograph) images and X-ray images. In order to ensure the accuracy of the registration algorithm in particular dimensions, the algorithm implements a dual-pose registration strategy. A PDE (Phased Differential Evolution) algorithm is proposed for iterative optimization, enhancing the optimization algorithm’s ability to globally search in low-dimensional space, aiding in the discovery of global optimal solutions. Extensive experimental results demonstrate that the proposed algorithm provides more accurate similarity metrics compared to conventional registration algorithms; the dual-pose registration strategy largely reduces errors in specific dimensions, resulting in reductions of 67.04% and 71.84%, respectively, in rotation and translation errors. Additionally, the algorithm is more suitable for clinical applications due to its lower complexity. Full article

The coherency matrix serves as a valuable tool for explaining the intricate details of various terrain targets. However, a significant challenge arises when analyzing ground targets with similar scattering characteristics in polarimetric synthetic aperture radar (PolSAR) target decomposition. Specifically, the overestimation of volume scattering (OVS) introduces ambiguity in characterizing the scattering mechanism and uncertainty in deciphering the scattering mechanism of large oriented built-up areas. To address these challenges, based on the generalized five-component decomposition (G5U), we propose a hierarchical extension of the G5U method, termed ExG5U, which incorporates orientation and phase angles into the matrix rotation process. The resulting transformed coherency matrices are then subjected to a five-component decomposition framework, enhanced with four refined volume scattering models. Additionally, we have reformulated the branch conditions to facilitate more precise interpretations of scattering mechanisms. To validate the efficacy of the proposed method, we have conducted comprehensive evaluations using diverse PolSAR datasets from Gaofen-3, Radarsat-2, and ESAR, covering varying data acquisition timelines, sites, and frequency bands. The findings indicate that the ExG5U method proficiently captures the scattering characteristics of ambiguous regions and shows promising potential in mitigating OVS, ultimately facilitating a more accurate portrayal of scattering mechanisms of various terrain types. Full article