Search Results (51)

This study investigates lignite, long-flame coal, coking coal, and anthracite to elucidate the rank-dependent evolution of coal macromolecular structure and pore systems. Elemental/proximate analyses, FTIR, XPS, ¹³C NMR, and low-temperature N₂ adsorption–desorption, combined with BET, BJH, and DFT models, were employed to quantify structural parameters, characterize pore-size distributions, and establish representative macromolecular models. The results show that coalification is accompanied by progressive aromatization and polycondensation. Low-rank coal contains abundant hydroxyl, carboxyl, and aliphatic side-chain structures, exhibiting low aromaticity and weak aromatic-ring condensation. With increasing rank, oxygen-containing groups and aliphatic chains are progressively removed, while aromatic carbon content and the bridgehead-to-peripheral carbon ratio increase markedly. High-rank coal is dominated by highly condensed aromatic lamellae, with lower molecular polarity and enhanced structural ordering and graphitization. Meanwhile, N and S occurrence modes evolve from edge-related reactive species to more stable heterocyclic configurations, reflected by increasing graphitic N and thiophenic S contents. Pore structures also change systematically: low-rank coal is characterized by open, multimodal mesopores; intermediate-rank coal shows compaction and mesopore collapse; and high-rank coal becomes micropore-dominated with a relatively closed network. The U-shaped variation in micropore and mesopore volumes with rank indicates coupled macromolecular polycondensation and pore reconstruction, providing a structural basis for spontaneous combustion propensity and coalbed methane occurrence. Full article

A comprehensive investigation was conducted focusing on two series of poly(lactic acid) (PLA)-based nanocomposites filled with small amounts (0.5 and 1.0%) of metal (Ag/Cu) nanoparticles (NPs). Our work aimed to synthesize PLA/Ag nanocomposites via in situ ring-opening polymerization (ROP), and for comparison purposes, the same materials were also prepared via solution casting followed by melt mixing. PLA/Cu nanocomposites were also prepared via melt extrusion. Gel permeation chromatography (GPC) and intrinsic viscosity measurements [η] showed that the incorporation of Ag nanoparticles (AgNPs) resulted in a decrease in the molecular weight of the PLA matrix, indicating a direct effect of the AgNPs on its macromolecular structure. Fourier-transform infrared spectroscopy (FTIR) revealed no significant changes in the characteristic peaks of the nanocomposites, except for an in situ sample containing 1.0 wt% of AgNPs, where slight interactions in the C=O region were detected. Differential scanning calorimetry (DSC) analysis confirmed the semi-crystalline nature of the materials. Glass transition temperature was strongly affected by the presence of NPs in the case of the in situ-based samples. Melt crystallized studies suggested potential indirect polymer–NP interactions, while isothermal melt crystallization experiments confirmed the nucleation ability of the NPs. The mechanical performance was assessed via tensile and flexural measurements, revealing that the in situ-based samples exhibited remarkable flexibility. Moreover, during the three-point bending tests, none of the in situ nanocomposite samples broke. In this context, next-generation PLA-based nanocomposites have been proposed for advanced applications, including flexible printed electronics. Full article

AAA+ ATPases are ring-shaped hexameric protein complexes that operate as elaborate macromolecular motors, driving a variety of ATP-dependent cellular processes. AAA+ ATPases undergo large-scale conformational changes that lead to the conversion of chemical energy from ATP into mechanical work to perform a wide range of functions, such as unfolding and translocation of the protein substrate inside a proteolysis chamber of an AAA+-associated protease. Despite extensive biochemical studies on these macromolecular assemblies, the mechanism of substrate unfolding and degradation has long remained elusive. Indeed, until recently, structural characterization of AAA+ protease complexes remained hampered by the size and complexity of the machinery, harboring multiple protein subunits acting together to process proteins to be degraded. Additionally, the major structural rearrangements involved in the mechanism of this complex represent a crucial challenge for structural biology. Here, we report the main advances in deciphering molecular details of the proteolytic reaction performed by AAA+ proteases, based on the remarkable progress in structural biology techniques. Particular emphasis is placed on the latest findings from high-resolution structural analysis of the ClpXP proteolytic complex, using crystallographic and cryo-EM investigations. In addition, this review presents some additional dynamic information obtained using solution-state NMR. This information provides molecular details that help to explain the protein degradation process by such molecular machines. Full article

B30.2 domains, sometimes referred to as PRY/SPRY domains, were originally identified by sequence profiling methods at the gene level. The B30.2 domain comprises a concanavalin A-like fold consisting of two twisted seven-stranded anti-parallel β-sheets. B30.2 domains are present in about 150 human and 700 eukaryotic proteins, usually fused to other domains. The B30.2 domain represents a scaffold, which, through six variable loops, binds different unrelated peptides or endogenous low-molecular-weight compounds. At the cellular level, B30.2 proteins engage in supramolecular assemblies with important signaling functions. In humans, B30.2 domains are often found in E3-ligases, such as tripartite motif (Trim) proteins, SPRY domain-containing SOCS box proteins, Ran binding protein 9 and −10, Ret-finger protein-like, and Ring-finger proteins. The B30.2 protein recognizes the target and recruits the E2-conjugase by means of the fused domains, often involving specific adaptor proteins. Further well-studied B30.2 proteins are the methyltransferase adaptor protein Ash2L, some butyrophilins, and Ryanodine Receptors. Although the affinity of an isolated B30.2 domain to its ligand might be weak, it can increase strongly due to avidity effects upon recognition of oligomeric targets or in the context of macromolecular machines. Full article

Epoxy-terminated hyperbranched polymers (EHBPs) are a class of macromolecular polymers with a hyperbranched structure containing epoxy groups. They possess characteristics such as low viscosity, high functionality, and thermal stability, which endow them with broad application potential in materials science and chemical engineering. This study uses epoxidized soybean oil (ESO) as the raw material, which undergoes ring-opening reactions with glycerol and is esterified with 2,2-bis(hydroxymethyl)propionic acid (DMPA) to obtain epoxy soybean oil polyol (EGD) with a high hydroxyl value. Subsequently, four types of EHBPs are synthesized by incorporating epichlorohydrin (ECH) in mass ratios of 1:3, 1:4, 1:5, and 1:6 under strong alkaline conditions. The product structure is characterized using FT–IR and GPC. The degree of branching of EGD is calculated using ¹H NMR and ¹³C NMR spectroscopy. The epoxy value of EHBPs is tested using the hydrochloric acid–acetone method, and the water contact angle, adhesion properties, rheological properties, and thermal properties of the EHBPs are also evaluated. The results show that the degree of branching of EGD is 0.45. The epoxy values of the EHBPs are 0.73, 0.79, 0.82, and 0.89 mol/100g, respectively. As the epoxy value and molecular weight of the epoxy hyperbranched polymers (EHBPs) increase, the water contact angle and adhesion strength of the EHBPs rise progressively and the viscosity decreases. Additionally, the glass transition temperature increases with the increase in the epoxy value. These epoxy hyperbranched polymers with low viscosity and high adhesion strength offer a promising approach for modifying surface coatings or formulating adhesives. Full article

To investigate the molecular structure characteristics and chemical reaction mechanisms of gas coal from the Hong II coal mine of the Ningxia Hongdunzi Coal Industry, this study explores its elemental composition, structural features, and methods for constructing and optimizing molecular models. The basic properties of the coal were determined through proximate and elemental analyses. The carbon structure was characterized using ¹³C-NMR nuclear magnetic resonance, the N and S chemical states were analyzed with XPS, and the distribution of hydroxyl, aliphatic hydrocarbons, aromatic rings, and oxygen-containing functional groups was characterized by FT-IR. Based on the analysis results, a molecular structure model of Hongdunzi gas coal was constructed with the molecular formula C₂₀₄H₁₁₇O₁₇NS, and the calculated results of the model showed high consistency with the experimental spectra of ¹³C-NMR. The macromolecular model of gas coal was constructed using the Materials Studio 2020 software, and its structure was optimized through geometric optimization and dynamic simulations. After optimization, the total energy of the model was significantly reduced from 8525.12 kcal·mol⁻¹ to 3966.16 kcal·mol⁻¹, highlighting the enhanced stability of the coal molecular structure. This optimization indicates that torsional energy plays a dominant role in molecular stability, while van der Waals forces and electrostatic interactions were significantly improved during the optimization process. Full article

To reduce the risk of side effects and enhance therapeutic efficiency, drug delivery systems that offer precise control over active ingredient release while minimizing burst effects are considered advantageous. In this study, a novel approach for the controlled release of lamivudine (LV) was explored through the fabrication of polyelectrolyte-coated microparticles. LV was covalently attached to poly(ε-caprolactone) via ring-opening polymerization, resulting in a macromolecular prodrug (LV-PCL) with a hydrolytic release mechanism. The LV-PCL particles were subsequently coated using the layer-by-layer (LbL) technique, with polyelectrolyte multilayers assembled to potentially modify the carrier’s properties. The LbL assembly process was comprehensively analyzed, including assessments of shell thickness, changes in ζ-potential, and thermodynamic properties, to provide insights into the multilayer structure and interactions. The sustained LV release over 7 weeks was observed, following zero-order kinetics (R² > 0.99), indicating a controlled and predictable release mechanism. Carriers coated with polyethylene imine/heparin and chitosan/heparin tetralayers exhibited a distinct increase in the release rate after 6 weeks and 10 weeks, respectively, suggesting that this coating can facilitate the autocatalytic degradation of the polyester microparticles. These findings indicate the potential of this system for long-term, localized drug delivery applications, requiring sustained release with minimal burst effects. Full article

The efficient preparation of single-stranded DNA (ssDNA) rings, as a macromolecular construction approach with topological features, has aroused much interest due to the ssDNA rings’ numerous applications in biotechnology and DNA nanotechnology. However, an extra splint is essential for enzymatic circularization, and by-products of multimers are usually present at high concentrations. Here, we proposed a simple and robust strategy using permuted precursor (linear ssDNA) for circularization by forming an intramolecular dynamic nick using a part of the linear ssDNA substrate itself as the template. After the simulation of the secondary structure for desired circular ssDNA, the linear ssDNA substrate is designed to have its ends on the duplex part (≥5 bp). By using this permuted substrate with 5′-phosphate, the splint-free circularization is simply carried out by T4 DNA ligase. Very interestingly, formation of only several base pairs (2–4) flanking the nick is enough for ligation, although they form only instantaneously under ligation conditions. More significantly, the 5-bp intramolecular duplex part commonly exists in genomes or functional DNA, demonstrating the high generality of our approach. Our findings are also helpful for understanding the mechanism of enzymatic DNA ligation from the viewpoint of substrate binding. Full article

Guanine-rich sequences of nucleic acids, including DNA and RNA, are known to fold into non-canonical structures named G-quadruplexes (G4s). Such arrangements of these macromolecular polymers are mainly located in telomeres and in promoter regions of oncogenes and, for this reason, they represent a potential target for compounds with therapeutic applications. In fact, the ligand-mediated stabilization of G4s inhibits telomerase and the activity of transcriptional machinery and counteracts cancer cell immortalization. Flavonoids, along with other classes of small molecules, have been previously tested for their ability to stabilize G4s, but the mechanism of their interaction has not been fully elucidated. In the current work, we report a multi-technique investigation on the binding of tosylated isoflavones obtained by the B-ring modification of compounds from Maclura pomifera to a telomeric DNA sequence. Our study demonstrates that such derivatization leads to compounds showing lower binding affinity but with an increased selectivity toward G4 with respect to double-stranded DNA. The binding mode to the macromolecular target G4 was studied by combining results from electrospray mass spectrometry binding studies, nuclear magnetic resonance experiments and computational simulations. Overall, our findings show that tosylation influences the selectivity toward the macromolecular target by affecting the interaction mode with the nucleic acid. Full article

In order to study the role of metal sodium in the spray pyrolysis of biomass tar, this paper designs a sodium-containing naphthalene pyrolysis system (NSS) and a pure naphthalene pyrolysis system (PNS) using naphthalene as the carbon source and sodium chloride as the sodium metal donor for comparison. This enables an exploration of the effect of sodium on the initial nucleation of carbon fumes formed by naphthalene pyrolysis using reaction molecular dynamics (ReaxFF MD). The simulation results show that NSS undergoes pyrolysis reactions earlier and faster than PNS at the same temperature. Simulated at 3250 K temperature for 2 ns, the naphthalene pyrolysis consumption rate of the NSS was faster than that of the PNS, and the addition of sodium atoms during the condensation process provided more active sites and accelerated the condensation of macromolecular products. Moreover, Na⁺ and carbon rings form a Na⁺-π structure to promote the bending of graphite lamellae to facilitate the formation of carbon nuclei. Molecular dynamics simulations were used to simulate the formation of carbon nuclei during the initial stage of naphthalene pyrolysis, revealing that the mechanism of sodium salt catalyzed the acceleration of organic matter pyrolysis from a microscopic visualization perspective. Full article

In this paper, the effects of HTPBs with different main-chain microstructures on their triblock copolymers and polyurethane properties were investigated. Three polyether-modified HTPB triblock copolymers were successfully synthesized via a cationic ring-opening copolymerization reaction using three HTPBs with different microstructures prepared via three different polymerization methods as the macromolecular chain transfer agents and tetrahydrofuran (THF) and propylene oxide (PO) as the copolymerization monomers. Finally, the corresponding polyurethane elastomers were prepared using the three triblock copolymers as soft segments and toluene diisocyanate (TDI) as hard segments. The results of an analysis of the triblock copolymers showed that the triblock copolymers had lower viscosity and glass transition temperature (T_g) values as the HTPB 1,2 structure content decreased, although the effect on the thermal decomposition temperature was not significant. An analysis of the polyurethane elastomers revealed that as the content of the 1,2 structure in HTPB increased, its corresponding polyurethane elastomers showed a gradual increase in breaking strength and a gradual decrease in elongation at break. In addition, PU-1 had stronger crystallization properties compared to PU-2 and PU-3. However, the differences in the microstructures of the HTPBs did not seem to have much effect on the surface properties of the polyurethane elastomers. Full article

Mitochondria, which generate ATP through aerobic respiration, also have important noncanonical functions. Mitochondria are dynamic organelles, that engage in fission (division), fusion (joining) and translocation. They also regulate intracellular calcium homeostasis, serve as oxygen-sensors, regulate inflammation, participate in cellular and organellar quality control and regulate the cell cycle. Mitochondrial fission is mediated by the large GTPase, dynamin-related protein 1 (Drp1) which, when activated, translocates to the outer mitochondrial membrane (OMM) where it interacts with binding proteins (Fis1, MFF, MiD49 and MiD51). At a site demarcated by the endoplasmic reticulum, fission proteins create a macromolecular ring that divides the organelle. The functional consequence of fission is contextual. Physiological fission in healthy, nonproliferating cells mediates organellar quality control, eliminating dysfunctional portions of the mitochondria via mitophagy. Pathological fission in somatic cells generates reactive oxygen species and triggers cell death. In dividing cells, Drp1-mediated mitotic fission is critical to cell cycle progression, ensuring that daughter cells receive equitable distribution of mitochondria. Mitochondrial fusion is regulated by the large GTPases mitofusin-1 (Mfn1) and mitofusin-2 (Mfn2), which fuse the OMM, and optic atrophy 1 (OPA-1), which fuses the inner mitochondrial membrane. Mitochondrial fusion mediates complementation, an important mitochondrial quality control mechanism. Fusion also favors oxidative metabolism, intracellular calcium homeostasis and inhibits cell proliferation. Mitochondrial lipids, cardiolipin and phosphatidic acid, also regulate fission and fusion, respectively. Here we review the role of mitochondrial dynamics in health and disease and discuss emerging concepts in the field, such as the role of central versus peripheral fission and the potential role of dynamin 2 (DNM2) as a fission mediator. In hyperproliferative diseases, such as pulmonary arterial hypertension and cancer, Drp1 and its binding partners are upregulated and activated, positing mitochondrial fission as an emerging therapeutic target. Full article

Medical titanium alloy Ti-6Al-4V (TC4) has been widely used in the medical field, especially in human tissue repair. However, TC4 has some shortcomings, which may cause problems with biocompatibility and mechanical compatibility in direct contact with the human body. To solve this problem, physical gels are formed on the surface of TC4, and the storage modulus of the formed physical gel matches that of the human soft tissue. 2-bromoisobutyryl bromide (BIBB) and dopamine (DA) were used to form initiators on the surface of hydroxylated medical titanium alloy. Different initiators were formed by changing the ratio of BIBB and DA, and the optimal one was selected for subsequent reactions. Under the action of the catalyst, L-lactide and D-lactide were ring-opened polymerized with hydroxyethyl methacrylate (HEMA), respectively, to form macromolecular monomers HEMA-PLLA₂₉ and HEMA-PDLA₂₉ with a polymerization degree of 29. The two macromolecular monomers were stereo-complexed by ultrasound to form HEMA-stereocomplex polylactic acid (HEMA-scPLA₂₉). Based on two monomers, 2-(2-methoxyethoxy) ethyl methacrylate (MEO₂MA) and oligo (ethylene oxide) methacrylate (OEGMA), and the physical crosslinking agent HEMA-scPLA_29, physical gels are formed on the surface of TC4 attached to the initiator via Atom Transfer Radical Addition Reaction (ATRP) technology. The hydrogels on the surface of titanium alloy were characterized and analyzed by a series of instruments. The results showed that the storage modulus of physical glue was within the range of the energy storage modulus of human soft tissue, which was conducive to improving the mechanical compatibility of titanium alloy and human soft tissue. Full article

Polymer micelles represent one of the most attractive drug delivery systems due to their design flexibility based on a variety of macromolecular synthetic methods. The environmentally safe chemistry in which the use or generation of hazardous materials is minimized has an increasing impact on polymer-based drug delivery nanosystems. In this work, a solvent-free green synthetic procedure was applied for the preparation of an amphiphilic diblock copolymer consisting of biodegradable hydrophobic poly(acetylene-functional carbonate) and biocompatible hydrophilic polyethylene glycol (PEG) blocks. The cyclic functional carbonate monomer 5-methyl-5-propargyloxycarbonyl-1,3-dioxane-2-one (MPC) was polymerized in bulk using methoxy PEG-5K as a macroinitiator by applying the metal-free organocatalyzed controlled ring-opening polymerization at a relatively low temperature of 60 °C. The functional amphiphilic block copolymer self-associated in aqueous media into stable micelles with an average diameter of 44 nm. The copolymer micelles were physico-chemically characterized and loaded with the plant-derived anticancer drug curcumin. Preliminary in vitro evaluations indicate that the functional copolymer micelles are non-toxic and promising candidates for further investigation as nanocarriers for biomedical applications. Full article

Fluorinated polymers are attractive due to their special thermal, surface, gas separation, and other properties. In this study, new diblock, multiblock, and random copolymers of cyclooctene with two fluorinated norbornenes, 5-perfluorobutyl-2-norbornene and N-pentafluorophenyl-exo-endo-norbornene-5,6-dicarboximide, are synthesized by ring-opening metathesis copolymerization and macromolecular cross-metathesis in the presence of the first- to third-generation Grubbs’ Ru-catalysts. Their thermal, surface, bulk, and solution characteristics are investigated and compared using differential scanning calorimetry, water contact angle measurements, gas permeation, and light scattering, respectively. It is demonstrated that they are correlated with the chain structure of the copolymers. The properties of multiblock copolymers are generally closer to those of diblock copolymers than of random ones, which can be explained by the presence of long blocks capable of self-organization. In particular, diblock and multiblock fluorine-imide-containing copolymers show a tendency to form micelles in chloroform solutions well below the overlap concentration. The results obtained may be of interest to a wide range of researchers involved in the design of functional copolymers. Full article