Search Results (872)

Capão da Roça, located in the municipality of Charqueadas, is one of the few areas of coal tailing deposits at the surface within the State of Rio Grande do Sul, Brazil that generates acid mine drainage (AMD). Over the course of 2007, the landfill was characterised in detail, and an active treatment plant involving pH neutralisation and metal precipitation operations was implemented to meet emission standards for mine water. In that year, based on the sulphur mass balance, it was estimated that the process of AMD generation would last for approximately two decades. The objective of this work was to study the temporal evolution of the parameters of the raw AMD. The effluent was analysed for 17 years on a monthly basis in regard to pH, acidity, metals (Fe, Al, and Mn), and sulphates. The results indicated an increase in pH (from 2.1 to 4.7), a decay in the concentration of metals (from 177.8 to 0.1 mg L⁻¹ for iron, 29.0 to 0.1 mg L⁻¹ for aluminium, and 3.1 to 0.6 mg L⁻¹ for manganese), sulphates (from 2023 to 307 mg L⁻¹), and acidity (from 539.5 mg CaCO₃ L⁻¹ to 3.96 mg CaCO₃ L⁻¹), which were adjusted to a first-order kinetic model in agreement with observations at some other mining sites. Over the years, the active lime neutralisation–precipitation treatment system has been efficient in treating the effluent. Today, most water quality parameters already meet emissions standards; however, the AMD treatment plant is still necessary to prevent pH fluctuations and to reduce the concentrations of manganese. For this reason, a transition from an active to a passive treatment system was considered. Pilot scale studies confirmed that channels filled with gravel-size limestone or slag enable the neutralisation/increase in the pH of the effluent and remove residual amounts of some metals, resulting in an effluent with no level of toxicity to the microcrustacean Daphnia magna. Full article

In Abidjan, the treatment of pig waste is becoming a priority given the continued growth of pig farms, which readily reuse manure as organic fertilizer. This study evaluated the effectiveness of anaerobic digestion for simultaneous biogas production and pathogen reduction from pig farm residues. Two 1600 L biodigesters were installed at pig farms in Port Bouët (PBk) and Abobo (Ab). They were fed with pig manure and water (1:4 ratio) and monitored over 56 days. The total biogas production was 22.63 m³ and 16.31 m³ for the PBk and Ab digesters, respectively, with peak production occurring between days 14 and 28. Following biofilter treatment, the methane content increased to 80–82%, yielding potential energy outputs of 2.32–3.29 kWh/d, with optimal production occurring at a pH of 7.28–7.76. The COD, BOD₅, organic acid, and total nitrogen levels decreased progressively in the biodigesters, while the mineral element content remained almost unchanged. Complete elimination was achieved for most of the bacteria tested (E. coli, Enterococcus, Salmonella, etc.). However, Bacillus and Clostridium were able to persist, albeit with significant reductions of between 3.11 and 5.79 log₁₀. Anaerobic digestion is an effective method of combining waste treatment and energy recovery. It eliminates major pathogens while producing valuable biogas. This makes it a sustainable waste management solution for urban agricultural systems. Full article

Biologically treated swine farm wastewater still contains high levels of refractory organics, humic substances and antibiotic residues, posing environmental risks and limiting opportunities for water reuse. Wastewater treatment by ozonation alone suffers from low mass transfer efficiency and selective oxidation. To overcome these limitations, a catalytic ozonation process (O₃/Fe²⁺/H₂O₂) was applied and optimized using Response Surface Methodology (RSM) based on single-factor experiments and Central Composite Design (CCD) for advanced swine farm wastewater treatment. The optimal conditions ([O₃] = 25.0 mg/L, [Fe²⁺] = 25.9 mg/L, [H₂O₂] = 41.1 mg/L) achieved a COD removal of 44.3%, which was 86.8% higher than that of ozonation alone, and increased TOC removal to 29.5%, indicating effective mineralization. Biodegradability (BOD₅/COD) of swine farm wastewater effluent increased from 0.01 to 0.34 after the catalytic ozonation treatment. Humic-like and fulvic-like substances were removed by 93.7% and 95.4%, respectively, and antibiotic degradation was significantly accelerated and enhanced. The synergistic process improved ozone utilization efficiency by 33.1% and removed 53.95% of total phosphorus through Fe³⁺-mediated coprecipitation. These findings demonstrate that with catalytic ozone decomposition and production of hydroxyl radicals, the O₃/Fe²⁺/H₂O₂ system effectively integrates enhanced ozone utilization efficiency, radical synergy, and simultaneous pollutant removal, providing a cost-effective and technically feasible strategy for advanced swine farm wastewater treatment and safe reuse. Full article

This study presents the production, characterization, and potential pharmaceutical application of a bioemulsifier synthesized by Aspergillus niger UCP 1064 by submerged fermentation using agro-industrial residues (cassava wastewater and soluble starch). The compound exhibited a high emulsification index (EI₂₄ > 88%) against hydrophobic substrates, effectively reduced surface tension, and remained stable across a wide range of pH (2–12), temperatures (5–100 °C), and salinity levels (0–20% NaCl). Microscopic analysis confirmed the formation of stable oil-in-water (O/W) emulsions, while biochemical tests identified the compound as a glycolipoprotein. Rheological assays demonstrated a significant reduction in oil viscosity, enhancing fluidity. Through factorial design and response surface methodology, production conditions were optimized, achieving yields of up to 3.18 g/L. A theoretical scale-up indicated technical feasibility for pharmaceutical applications; however, challenges such as process reproducibility, sterility, and regulatory compliance persist. These findings highlight the bioemulsifier’s potential as a sustainable and biocompatible alternative for drug delivery systems. Full article

The relationship between the structure and function of bacterial laccases has garnered significant research attention thanks to their straightforward molecular structure. Nevertheless, studies examining the impact of an altered molecular structure on the heterologous expression of bacterial laccases in Escherichia coli remain scarce. Our research focuses on elucidating the impact of incorporating copper ions into the molecular structure of modified CotA on its exogenous expression in E. coli as well as its impact on the significance of the amino acid residues surrounding the internal electron channels and water molecule channels of the enzyme molecule. The results show that single-site mutation may affect the expression of CotA by affecting its soluble expression with different binding capacities for copper ions. In addition, the mutants exhibited different laccase activity levels. The catalytic efficiency of T466A was found to be significantly enhanced, reaching 2.29 times that of the wild type. We used structural models to illustrate the correlation between molecular structure and function after the replacement of three mutation sites with alanine. The reduction of hydrogen bonds may be an important factor influencing Cu²⁺’s binding ability and the water molecule production rate. The T466A mutant exhibited strong decolorization ability for Reactive Blue 19 and Eriochrome Black T with 42.2% and 58.2% decolorization rates after one hour of reaction, respectively. This study demonstrates that the molecular mutation studied influences the CotA expression level, enzyme activity, and dye decolorization. Full article

The Niland Moving Mud Spring, located near the southeastern margin of the Salton Sea, represents a rare and evolving geotechnical hazard. Unlike the typically stationary mud pots of the Salton Trough, this spring is a CO₂-driven mud spring that has migrated southwestward since 2016, at times exceeding 3 m per month, posing threats to critical infrastructure including rail lines, highways, and pipelines. Emergency mitigation efforts initiated in 2018, including decompression wells, containment berms, and route realignments, have since slowed and recently almost halted its movement and growth. This study integrates hydrochemical, temperature, stable isotope, and tritium data to propose a refined conceptual model of the Moving Mud Spring’s origin and migration. Temperature data from the Moving Mud Spring (26.5 °C to 28.3 °C) and elevated but non-geothermal total dissolved solids (~18,000 mg/L) suggest a shallow, thermally buffered groundwater source influenced by interaction with saline lacustrine sediments. Stable water isotope data follow an evaporative trajectory consistent with imported Colorado River water, while tritium concentrations (~5 TU) confirm a modern recharge source. These findings rule out deep geothermal or residual floodwater origins from the great “1906 flood”, and instead implicate more recent irrigation seepage or canal leakage as the primary water source. A key external forcing may be the 4.1 m drop in Salton Sea water level between 2003 and 2025, which has modified regional groundwater hydraulic head gradients. This recession likely enhanced lateral groundwater flow from the Moving Mud Spring area, potentially facilitating the migration of upwelling geothermal gases and contributing to spring movement. No faults or structural features reportedly align with the spring’s trajectory, and most major fault systems trend perpendicular to its movement. The hydrologically driven model proposed in this paper, linked to Salton Sea water level decline and correlated with the direction, rate, and timing of the spring’s migration, offers a new empirical explanation for the observed movement of the Niland Moving Mud Spring. Full article

Effective environmental monitoring is critical for preventing microbial and allergenic cross-contamination. However, manual swabbing methods, commonly used to verify hygienic conditions, are prone to inconsistent results because of variability in pressure, coverage, and techniques. Two novel solutions will be explored to address these challenges: a robotic swabbing system with tactile sensing control, and a fluorescence/absorbance spectrometer for non-contact, protein-based residue detection. The robotic system was evaluated against trained and untrained humans, measuring water pickup, surface coverage, and pressure consistency. Concurrently, the fluorescence system analyzed model poultry protein soil to correlate spectral patterns with contamination levels. The robotic system demonstrated statistically superior performance, achieving consistent force application and near-complete surface coverage, overcoming key limitations of manual sampling. The fluorescence system distinguished contamination with high sensitivity, validating its use as a rapid, non-contact assessment tool. Together, the robotic sample acquisition and the spectrometer’s sensitive analysis provide a dual-modality framework for enhancing hygiene monitoring in manufacturing facilities. Full article

The galvanic industry requires considerable amounts of water and produces significant quantities of wastewater. Two types of wastewater are created in the processes of the galvanic application of metal coatings: used galvanic baths and wastewater generated while rinsing coated elements. The composition and amount of wastewater depend on the type of process, the plant’s operational system, and the quantity of water utilised to rinse the coated elements. In this article, the possibilities of using different techniques, such as chemical precipitation, coagulation and flocculation, ion exchange, adsorption, and membrane filtration, to remove heavy metals from galvanic wastewater were analysed and assessed. It was determined that the use of physicochemical methods (i.e., chemical precipitation, coagulation, and flocculation) to remove heavy metals has significant disadvantages, including operational costs connected with the purchase of chemical reagents and the emergence of metal complexes requiring management/utilisation. On the other hand, the processes of ion exchange and adsorption can be used only for wastewater characterised by a low heavy metal concentration, with organic matter preliminarily removed. In addition, waste polluted with heavy metals in the form of used regenerative baths and used sorbents is generated during these processes. In turn, the advanced techniques of membrane filtration allow for the removal of different types of organic pollutants and heavy metals. The processes of membrane wastewater treatment exhibit a range of advantages compared to traditional technologies, including the complete, environmentally friendly removal of permanent organic pollution, easy integration into conventional technologies, a limited amount of residue, a high level of separation, and a shorter process time. The efficiency of membrane wastewater treatment depends on many parameters, including, most of all, the composition, pH, and type of membrane, as well as process conditions. The possibility of using new types of membranes to remove heavy metals from spent galvanic baths was analysed, and the possibility of using the processes in wastewater treatment systems according to the circular economy model was assessed. The assessment of the efficiency of heavy metal removal in hybrid systems combining specific individual processes and the development of state-of-the-art material solutions to realise these processes may be an interesting direction of research in this field. Full article

Groundwater level (GWL) prediction in arid regions faces two fundamental challenges in conventional numerical modeling: (i) irreducible parameter uncertainty, which systematically reduces predictive accuracy; (ii) oversimplification of nonlinear process interactions, which leads to error propagation. Although machine learning (ML) methods demonstrate strong nonlinear mapping capabilities, their standalone applications often encounter prediction bias and face the accuracy–generalization trade-off. This study proposes a hybrid TCN–Transformer–LSTM (TTL) model designed to address three key challenges in groundwater prediction: high-frequency fluctuations, medium-range dependencies, and long-term memory effects. The TTL framework integrates TCN layers for short-term features, Transformer blocks to model cross-temporal dependencies, and LSTM to preserve long-term memory, with residual connections facilitating hierarchical feature fusion. The results indicate that (1) at the monthly scale, TTL reduced RMSE by 20.7% (p < 0.01) and increased R² by 0.15 compared with the Groundwater Modeling System (GMS); (2) during abrupt hydrological events, TTL achieved superior performance (R² = 0.96–0.98, MAE < 0.6 m); (3) PCA revealed site-specific responses, corroborating the adaptability and interpretability of TTL; (4) Grad-CAM analysis demonstrated that the model captures physically interpretable attention mechanisms—particularly evapotranspiration and rainfall—thereby providing clear cause–effect explanations and enhancing transparency beyond black-box models. This transferable framework supports groundwater forecasting, risk warning, and practical deployment in arid regions, thereby contributing to sustainable water resource management. Full article

This paper aims to develop a robust empirical–analytical model using the statistics of mine water level rebound in abandoned mines and the basic physical principles of underground hydraulics. The data collected and treated included the time series of the mine water level for 35 closed and flooded mines from four European countries. Within the developed model, mine water level evolution is governed by an ordinary differential equation with one fitting parameter that depends on the floodable cavity volume in a mine and water inflow before flooding begins. The model assumes that rock properties and residual void distribution are homogeneous, and the mines being flooded are almost isolated hydraulically from the neighboring ones. The exponential formula, as the governing equation solution, was found to be the most suitable for fitting the measurements. The calculated exponential curves allow for excellent or very good fitting of the measured water levels for 17 of 35 mines, and acceptable fitting for 11 mines in terms of minimizing mean-square-root deviation. The proposed approach can be applied to preliminary assessments of mine water level rebound in developing and calibrating sophisticated numerical flow models. Full article

High-permeability emulsified asphalt has emerged as a promising prime coat for enhancing interlayer bonding in semi-rigid pavement structures. However, its widespread adoption remains limited by insufficient permeability and inconsistent mechanical properties. This study systematically investigated the effects of emulsifier ionic type (cationic or anionic), kerosene dosage (0–20%), and diluted asphalt content (corresponding to oil-water ratios of 5:5 and 4:6) on the comprehensive performance of high-permeability emulsified asphalt. Fundamental physical tests (sieve residue, evaporation residue, penetration, softening point, ductility), permeability evaluation, rotational viscosity measurements, and adhesion performance tests were conducted. Grey relational analysis (GRA) was employed to quantify the influence of each factor and their interactions on key performance metrics. The results reveal that anionic emulsifiers significantly improved low-temperature ductility and permeability. A low kerosene dosage (<10%) enhanced permeability and viscosity but compromised thermal stability at higher levels. Reducing the diluted asphalt content partially offset these adverse effects. GRA identified kerosene dosage as the dominant factor influencing permeability, softening point, and adhesion performance while emulsifier ionic type primarily affected ductility, and oil-water ratio strongly governed emulsification quality and viscosity. These findings provide quantitative insights for optimizing the composition of high-permeability emulsified asphalt and serve as a theoretical foundation for its engineering application in durable prime coats. Full article

Traditional thermal concentration processes for LiCl, such as multi-effect evaporation and mechanical vapor recompression (MVR), suffer from drawbacks including high energy consumption and severe equipment corrosion. However, electrodialysis (ED) technology offers several advantages in the concentration process, including high efficiency, energy conservation, selective separation, and the absence of phase-change requirements. This study presents an innovative two-level ED process for efficient LiCl concentration, addressing the limitations of conventional thermal methods. Through systematic small-scale and scale-up experiments, we developed an optimized process achieving exceptional performance. The system attained Li⁺ concentrations of 22.17 g/L in the concentrated solution and 21.17 g/L in the recycled dilute solution, while reducing residual Li⁺ in discharge water to just 1.08 g/L. Remarkably, the process demonstrated significant energy efficiency, with a total consumption of only 85.22 kWh/t LiCl and a minimal water migration amount of 4.21 L/(m²·h). Economic analysis revealed substantial cost savings of 14.66 USD/t LiCl compared to traditional evaporation methods. These findings establish ED as a technically and economically viable solution for industrial LiCl concentration, offering both high efficiency and environmental benefits. Full article

The relative efficacy of amorphous silica dusts, malathion, and pirimiphos methyl was assessed against S. oryzae and T. castaneum in stored wheat under laboratory conditions. Insecticidal performance was influenced by physical properties such as particle size, surface area, bulk density, and oil/water adsorption capacity. Fumed silicas showed the highest toxicity, particularly Wacker HDK H20 (LC₅₀ = 19.4 mg/100 g at 12% moisture). Precipitated silica, Sipernat 22, though less potent (LC₅₀ = 46.6 mg/100 g), displayed consistent efficacy across different moisture levels, making it a suitable inert carrier. Increasing grain moisture to 15% significantly reduced the effectiveness of all dusts. When insecticides were combined with silica, their toxicity increased markedly. Malathion on silica (0.2%) reduced LC₅₀ values to 21.5 and 23.3 µg a.i./100 g for T. castaneum and S. oryzae, respectively, compared to 52.3 and 84.7 µg a.i./100 g on talc. Pirimiphos methyl on silica (0.1%) was the most effective, achieving LC₅₀ values of 13.4 and 15.5 µg a.i./100 g. Long-term bioassays over 25 weeks showed declining mortality rates, particularly at 15% moisture. However, pirimiphos methyl on silica maintained over 90% mortality at 12% moisture throughout the period, indicating strong residual efficacy. The results highlight the synergistic potential of combining silica with chemical insecticides and the crucial role of environmental humidity in stored grain pest management. Full article

This study provides a comparative analysis of agricultural practices, water resource management, and environmental risks in two rural communes of Transylvania, Romania—Ceanu Mare (Cluj County) and Chețani (Mureș County). Data were collected in June 2025 through structured questionnaires administered to 430 households in Ceanu Mare and 184 households in Chețani, representing over 30% and 20% of the total households, respectively. The research examines the structure of agricultural activity, use of fertilizers and pesticides, irrigation methods, and the local perception of pollution and subsidy programs. Both communes exhibit small-scale, household-based agriculture, but notable differences exist: Ceanu Mare demonstrates higher use of chemical inputs and environmental awareness, while Chețani relies more on organic fertilizers and private wells for irrigation. In addition to survey-based data, the study incorporates direct chemical analysis of household well water, assessing concentrations of nitrate (NO₃⁻), nitrite (NO₂⁻), ammonium (NH₄⁺), and pH levels as indicators of groundwater quality and public health risk. The results reveal that NO₃⁻ remained below the 50 mg/L standard in all wells, while NO₂⁻ approached or slightly exceeded 0.50 mg/L in a few Ceanu Mare villages, underscoring the vulnerability of shallow wells to diffuse agricultural inputs and sanitation deficits. The study also characterizes the main agrochemical compounds used and discusses their potential impacts on water and soil quality, emphasizing nitrate leaching, phosphate runoff, and the persistence of pesticide residues as major risks. These findings underscore the necessity of integrated management strategies, regular monitoring of groundwater quality, and targeted policy interventions to ensure sustainable rural development and environmental protection in similar Central and Eastern European contexts. Full article

Returning crop residues to soil is fundamental to sustainable agriculture, yet its adoption in cold-climate regions is hampered by an agronomic paradox: surface mulching conserves water but suppresses the spring soil temperatures required for crop establishment. In the present study, through a nine-year field experiment in a Mollisol under continuous maize cultivation, it was demonstrated that the method of maize straw incorporation, not merely its rate, is the decisive factor in resolving this conflict. While surface mulching maximized water conservation, it induced severe soil cooling and showed minimal gains in soil fertility. In contrast, incorporation via rotary tillage or deep plowing mitigated this cooling effect and proved superior for nutrient cycling. Among all strategies, rotary tillage of 50% residue (ROT-50) delivered the most balanced performance: it achieved the highest total nitrogen, substantially increased soil microbial biomass, and maintained one of the highest levels of Shannon diversity among incorporation treatments. These biogeochemical enhancements were driven by a fundamental, method-induced shift in the bacterial community from an oligotrophic to a copiotrophic structure. These findings shift the paradigm from a focus on residue quantity to one on incorporation method, providing a robust framework for reconciling crop productivity with long-term soil health in temperate agroecosystems. Full article