Search Results (16,534)

Understanding the time-lagged response of land subsidence to groundwater level fluctuations and subsurface strain variations is crucial for uncovering its underlying mechanisms and enhancing disaster early warning capabilities. This study focuses on Dangshan County, Anhui Province, China, and systematically analyzes the spatio-temporal evolution of land subsidence from 2018 to 2024. A total of 207 Sentinel-1 SAR images were first processed using the Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) technique to generate high-resolution surface deformation time series. Subsequently, the seasonal-trend decomposition using the LOESS (STL) model was applied to extract annual cyclic deformation components from the InSAR-derived time series. To quantitatively assess the delayed response of land subsidence to groundwater level changes and subsurface strain evolution, time-lagged cross-correlation (TLCC) analysis was performed between surface deformation and both groundwater level data and distributed fiber-optic strain measurements within the 5–50 m depth interval. The strain data was collected using a borehole-based automated distributed fiber-optic sensing system. The results indicate that land subsidence is primarily concentrated in the urban core, with annual cyclic amplitudes ranging from 10 to 18 mm and peak values reaching 22 mm. The timing of surface rebound shows spatial variability, typically occurring in mid-February in residential areas and mid-May in agricultural zones. The analysis reveals that surface deformation lags behind groundwater fluctuations by approximately 2 to 3 months, depending on local hydrogeological conditions, while subsurface strain changes generally lead surface subsidence by about 3 months. These findings demonstrate the strong predictive potential of distributed fiber-optic sensing in capturing precursory deformation signals and underscore the importance of integrating InSAR, hydrological, and geotechnical data for advancing the understanding of subsidence mechanisms and improving monitoring and mitigation efforts. Full article

Groundwater in the Qingshui River Plain of southern Ningxia is one of the main water sources for local domestic and agricultural use. However, due to the geological background of the area, 33.94% of the groundwater samples had fluoride concentrations that exceeded the WHO drinking water standards. To examine the spatial patterns and formation processes of fluoride in groundwater, researchers gathered 79 rock samples, 2618 soil samples, 21 sediment samples, 138 groundwater samples, and 82 surface water samples across the southern Qingshui River Plain. The collected data were analyzed using statistical approaches and hydrogeochemical diagrams. The findings reveal that fluoride levels in groundwater exhibit a gradual increase from the eastern, western, and southern peripheral sloping plains toward the central valley plain. Vertically, higher fluoride concentrations are found within 100 m of depth. Over a ten-year period, fluoride concentrations have shown minimal variation. Fluoride-rich rocks, unconsolidated sediments, and soils are the primary sources of fluoride in groundwater. The primary mechanisms governing high-fluoride groundwater formation are rock weathering and evaporative concentration, whereas cation exchange adsorption promotes fluoride (F⁻) mobilization into the aquifer. Additional sources of fluoride ions include leaching of fluoride-rich sediments during atmospheric precipitation infiltration and recharge from fluoride-rich surface water. Full article

Steam networks are widely used for industrial heat supply. High-temperature heat pumps (HTHPs) are an increasingly attractive low-emission solution to traditional steam generation, which could also improve the operational efficiency and energy demand flexibility of industrial processes. This work characterises 4-bar steam supply via HTHPs and aims to assess how variations in power input that result from flexible HTHP operation may affect steam flow and temperature, both with and without a downstream steam accumulator (SA). First, steady-state modelling is used for system design. Then, dynamic component models are developed and used to simulate the system response to HTHP power input variations. The performance of different SA integration layouts and sizes is evaluated. Results demonstrate that steam supply fluctuations closely follow changes in HTHP operation. A downstream SA is shown to mitigate these variations to an extent that depends on its capacity. Practical SA sizing recommendations are derived, which allow for the containment of steam supply fluctuations within acceptability. By providing a basis for evaluating the financial viability of flexible HTHP operation for steam provision, the results support clean technology’s development and uptake in industrial steam and district heating networks. Full article

Interpreting complex clinical time series is vital for patient safety and care, as it is both essential for supporting accurate clinical assessment and fundamental to building clinician trust and promoting effective clinical action. In complex time series analysis, decomposing a signal into meaningful underlying components is often a crucial means for achieving interpretability. This process is known as time series disentanglement. While deep learning models excel in predictive performance in this domain, their inherent complexity poses a major challenge to interpretability. Furthermore, existing time series disentanglement methods, including traditional trend or seasonality decomposition techniques, struggle to adequately separate clinically crucial specific components: static patient characteristics, condition trend, and acute events. Thus, a key technical challenge remains: developing an interpretable method capable of effectively disentangling these specific components in complex clinical time series. To address this challenge, we propose CoTD-VAE, a novel variational autoencoder framework for interpretable component disentanglement. CoTD-VAE incorporates temporal constraints tailored to the properties of static, trend, and event components, such as leveraging a Trend Smoothness Loss to capture gradual changes and an Event Sparsity Loss to identify potential acute events. These designs help the model effectively decompose time series into dedicated latent representations. We evaluate CoTD-VAE on critical care (MIMIC-IV) and human activity recognition (UCI HAR) datasets. Results demonstrate successful component disentanglement and promising performance enhancement in downstream tasks. Ablation studies further confirm the crucial role of our proposed temporal constraints. CoTD-VAE offers a promising interpretable framework for analyzing complex time series in critical applications like healthcare. Full article

To address the challenges of leaf–branch occlusion, fruit mutual occlusion, complex background interference, and scale variations in peach detection within complex orchard environments, this study proposes an improved YOLOv11n-based peach detection method named SDA-YOLO. First, in the backbone network, the LSKA module is embedded into the SPPF module to construct an SPPF-LSKA fusion module, enhancing multi-scale feature representation for peach targets. Second, an MPDIoU-based bounding box regression loss function replaces CIoU to improve localization accuracy for overlapping and occluded peaches. The DyHead Block is integrated into the detection head to form a DMDetect module, strengthening feature discrimination for small and occluded targets in complex backgrounds. To address insufficient feature fusion flexibility caused by scale variations from occlusion and illumination differences in multi-scale peach detection, a novel Adaptive Multi-Scale Fusion Pyramid (AMFP) module is proposed to enhance the neck network, improving flexibility in processing complex features. Experimental results demonstrate that SDA-YOLO achieves precision (P), recall (R), mAP@0.95, and mAP@0.5:0.95 of 90.8%, 85.4%, 90%, and 62.7%, respectively, surpassing YOLOv11n by 2.7%, 4.8%, 2.7%, and 7.2%. This verifies the method’s robustness in complex orchard environments and provides effective technical support for intelligent fruit harvesting and yield estimation. Full article

The implantable capsule grouting pile is a novel pile foundation technology in which a capsule is affixed to the side of the implanted pile to facilitate grouting and achieve extrusion-based reinforcement. This technique is designed to improve the bearing capacity of implanted piles in coastal areas with deep, soft soil. This study conducted model tests involving multiple grouting positions across different foundation types to refine the construction process and validate the enhancement of bearing capacity. Systematic measurements and quantitative analyses were performed to evaluate the earth pressure distribution around the pile, the resistance characteristics of the pile end, the evolution of side friction resistance, and the overall bearing performance. Special attention was given to variations in the lateral friction resistance adjustment coefficient under different working conditions. Furthermore, an actual case analysis was conducted based on typical soft soil geological conditions. The results indicated that the post-grouting process formed a dense soil ring through the expansion and extrusion of the capsule, resulting in increased soil strength around the pile due to increased lateral earth pressure. Compared to conventional piles, the grouted piles exhibited a synergistic improvement characterized by reduced pile end resistance, enhanced side friction resistance, and improved overall bearing capacity. The ultimate bearing capacity of model piles at different grouting depths across different foundation types increased by 6.8–22.3% compared with that of ordinary piles. In silty clay and clayey silt foundations, the adjustment coefficient η_s of lateral friction resistance of post-grouting piles ranged from 1.097 to 1.318 and increased with grouting depth. The findings contribute to the development of green pile foundation technology in coastal areas. Full article

Three-dimensional (3D) reproduction of artworks has advanced significantly, offering valuable insights for conservation by documenting the objects’ conservative state at both macroscopic and microscopic scales. This paper presents the 3D survey of an earthquake-damaged panel painting, whose wooden support suffered severe deformation during a seismic event, posing unique restoration challenges. Our work focuses on quantifying how shape variations in the support—induced during restoration—affect the surface morphology of the pictorial layers. To this end, we conducted measurements before and after support consolidation using two complementary 3D techniques: structured-light projection to generate 3D models of the painting, tracking global shape changes in the panel, and laser-scanning microprofilometry to produce high-resolution models of localized areas, capturing surface morphology, superficial cracks, and pictorial detachments. By processing and cross-comparing 3D point cloud data from both techniques, we quantified shape variations and evaluated their impact on the pictorial layers. This approach demonstrates the utility of multi-scale 3D documentation in guiding complex restoration interventions. Full article

Driver models, which provide mathematical or computational representations of human driving behavior, are crucial for intelligent driving systems by enabling stable and repeatable operations. However, existing models typically employ fixed weighting parameters to simulate preview delay, failing to reflect individual driver differences and real-time dynamic behaviors. This paper proposes a Brain-Memory Driver Model (BMDM) that emulates human brain memory mechanisms to dynamically adjust preview weights by integrating global path curvature, real-time vehicle speed, and steering torque. This emulation involves a three-stage process: capturing data in an Instantaneous Memory (IM) region, filtering data via a forgetting mechanism in a Short-Time Memory (STM) region to reduce scale, and retaining data based on correlation strength in a Long-Time Memory (LTM) region for persistent mining. By deploying a trained behavioral memory database, the model dynamically calibrates preview weights based on the driver’s state and real-time curvature variations under different road conditions. This enables the model to more accurately simulate authentic preview characteristics and improves its adaptability. Simulation results from an automated steering case study demonstrate that the improved model exhibits control performance closer to the real driving process, reproducing authentic steering behavior within the human–vehicle–road closed-loop system from an intelligent biomimetic perspective. Full article

The Ti-6Al-4V alloy is a typical α + β type titanium alloy and is widely used in the manufacture of aero-engine fans, compressor discs and blades. The working life of modern aero-engine components is usually required to reach more than 10⁸ cycles, which makes the infinite life design based on the traditional fatigue limit unsafe. In this study, through symmetrical loading high-cycle fatigue tests on Ti-6Al-4V titanium alloy, a nonlinear cumulative damage life prediction model was established. Further very-high-cycle fatigue tests of titanium alloys were carried out. The variation law of plastic strain energy in the evolution process of very-high-cycle fatigue damage of titanium alloy materials was described by introducing the internal stress parameter. A prediction model for the very-high-cycle fatigue life of titanium alloys was established, and the sensitivity analysis of model parameters was carried out. The results show that the established high-cycle/very-high-cycle fatigue models can fit the test data well. Moreover, based on the optimized model parameters through sensitivity analysis, the average error of the prediction results has decreased from 59% to 38%. The research aims to provide a model or method for predicting the engineering life of titanium alloys in the high-cycle/very-high-cycle range. Full article

Measuring the small tree trunk variations during the day–night cycle, seasonal cycles, as well as those caused by the plant’s growth and health regime is a very important action in horticulture or forestry because by analyzing the collected data, assessments can be made on the health of the trees, but also on the climatic conditions and changes in a certain region. This can be performed with devices called dendrometers. This paper presents a new type of approach to these measurement types in which the trunk volume changes are highly sensitively converted into the axial stress on sensitive elements made of magnetic materials in wire form in which the giant stress impedance effect occurs. Finally, by electronic processing of the signals provided by the sensitive elements, digital words with a decimal value proportional to the diameter variations are obtained. This paper presents the operating principle, the constructive details and the experimental results obtained by testing the device in the laboratory and in-field. The proposed dendrometer, compared to those available commercially, has the advantage of good resolution and sensitivity, good immunity to temperature variations, the possibility of transmitting the result remotely, robustness and low price. Some metrological parameters obtained from the experimental testing are the following: resolution 1.6 µm, linearity 1.4%, measurement range 0 to 5 mm, temperature coefficient 0.012%/°C. Full article

The lower sub-member of Member 2, Dongying Formation (Paleogene) in the HHK Depression hosts an extensively developed thin-bedded beach-bar system characterized by favorable source rock conditions and reservoir properties, indicating significant hydrocarbon exploration potential. Integrating drilling cores, wireline log interpretations, three-dimensional seismic data, geochemical analyses, and palynological data, this study investigates the sedimentary characteristics, sandbody distribution patterns, controlling factors, and genetic model of this lacustrine beach-bar system. Results reveal the following: (1) widespread thin-bedded beach-bar sandbodies dominated by fine-grained sandstones and siltstones, exhibiting wave ripples and low-angle cross-bedding; (2) two vertical stacking patterns, Type A, thick mudstone intervals intercalated with laterally continuous thin sandstone layers, and Type B, composite sandstones comprising thick sandstone units overlain by thin sandstone beds, both demonstrating significant lateral continuity; (3) three identified microfacies: bar-core, beach-core, and beach-margin facies; (4) key controls on sandbody development: paleoenvironmental evolution establishing the depositional framework, secondary fluctuations modulating depositional processes, strike-slip extensional tectonics governing structural zonation, paleobathymetry variations and paleotopography controlling distribution loci, and provenance clastic influx regulating scale and enrichment (confirmed by detrital zircon U-Pb dating documenting a dual provenance system). Collectively, these findings establish a sedimentary model for a thin-bedded beach-bar system under the strike-slip extensional tectonic framework. Full article

Bingdao ancient tree tea (BATT), a type of raw Pu-erh tea, is renowned for its brewing durability, characterized by a unique aroma and flavor. To explore the dynamic changes in infusion quality and the impact of multiple steeping process, BATT was brewed 14 times, and its sensory attributes, infusion color, and chemical composition were assessed across different brewing intervals. The color of the tea infusion remained relatively stable throughout the brewing process. Sensory evaluation indicated that BATT exhibited optimal sensory quality between the third and seventh infusions. While the leaching of polyphenols showed minimal variation across brews, the concentrations of ester-catechins, non-ester catechins, free amino acids, and caffeine after the seventh brewing decreased by 28.82%, 21.83%, 28.86%, and 40.37%, respectively. Our results indicated that higher concentrations of flavor compounds in the BATT infusion appeared between the fourth and seventh brews. This study provides a theoretical basis for understanding the brewing characteristics of BATT. Full article

Natural gas storage is an effective solution to address the energy supply–demand imbalance, and underground gas storage (UGS) is a primary method for storing natural gas. The overarching goal of this study is to monitor and analyze surface deformation at the Hutubi underground gas storage facility in Xinjiang, China, which is the largest gas storage facility in the country. This research aims to ensure the stable and efficient operation of the facility through long-term monitoring, using remote sensing data and advanced modeling techniques. The study employs the SBAS-InSAR method, leveraging Synthetic Aperture Radar (SAR) data from the TerraSAR and Sentinel-1 sensors to observe displacement time series from 2013 to 2024. The data is processed through wavelet transformation for denoising, followed by the application of a Gray Wolf Optimization (GWO) algorithm combined with Variational Mode Decomposition (VMD) to decompose both surface deformation and gas pressure data. The key focus is the development of a high-precision predictive model using a Gated Recurrent Unit (GRU) network, referred to as GWO-VMD-GRU, to accurately predict surface deformation. The results show periodic surface uplift and subsidence at the facility, with a notable net uplift. During the period from August 2013 to March 2015, the maximum uplift rate was 6 mm/year, while from January 2015 to December 2024, it increased to 12 mm/year. The surface deformation correlates with gas injection and extraction periods, indicating periodic variations. The accuracy of the InSAR-derived displacement data is validated through high-precision GNSS data. The GWO-VMD-GRU model demonstrates strong predictive performance with a coefficient of determination (R²) greater than 0.98 for the gas well test points. This study provides a valuable reference for the future safe operation and management of underground gas storage facilities, demonstrating significant contributions to both scientific understanding and practical applications in underground gas storage management. Full article

Protein and amino acid content are the crucial quality parameters in bottle gourd, and traditional measurement methods for detecting those parameters are complicated, time-consuming, and costly. In this study, we employed NIRS along with machine learning and neural network-based methods to model and predict protein and free amino acids (FAAs) of bottle gourd. Specifically, the content of protein and FAAs were measured through conventional methods. Then a near-infrared analyzer was utilized to obtain the spectral data, which were processed using multiple scattering correction (MSC) and standard normalized variate (SNV). The processed spectral data were further processed using feature importance selection to select the feature bands that had the highest correlation with protein and FAAs, respectively. The models for protein and FAAs estimation were developed using support vector regression (SVR), ridge regression (RR), random forest regression (RFR), and fully connected neural networks (FCNNs). Among them, ridge regression achieved the optimal performance, with determination coefficients (R²) of 0.96 and 0.77 on the protein and FAAs test sets, respectively, and root mean square error (RMSE) values of 0.23 and 0.5, respectively. Based on this, we developed a precise and rapid prediction model for the important quality indices of bottle gourd. Full article

Snow water equivalent (SWE) can be estimated using Differential SAR Interferometry (DInSAR), which captures changes in snow depth and density between two SAR acquisitions. However, challenges arise due to SAR signal penetration into the snowpack and the intrinsic limitations of DInSAR measurements. This study addresses these issues and explores the use of multi-band SAR data to derive SWE maps in alpine regions characterized by steep terrain, small spatial extent, and a potentially heterogeneous snowpack. We first conducted a performance analysis to assess SWE estimation precision and the maximum unambiguous SWE variation, considering incidence angle, wavelength, and coherence. Based on these results, we selected C-band Sentinel-1 and L-band SAOCOM data acquired over alpine areas and applied tailored DInSAR processing. Atmospheric artifacts were corrected using zenith total delay maps from the GACOS service. Additionally, sensitivity maps were generated for each interferometric pair to identify pixels suitable for reliable SWE estimation. A comparative analysis of the C- and L-band results revealed several critical issues, including significant atmospheric artifacts, phase decorrelation, and phase unwrapping errors, which impact SWE retrieval accuracy. A comparison between our Sentinel-1-based SWE estimations and independent measurements over an instrumented site shows results fairly in line with previous works exploiting C-band data, with an RSME in the order of a few tens of mm. Full article