Search Results (686)

Membrane bioreactors (MBRs) have been utilized for maricultural wastewater treatment, where high-salinity stress results in dramatic membrane fouling in the actual process. A microalgal–bacterial symbiotic system (MBSS) offers advantages for photosynthetic oxygen production, dynamically regulating the structure of extracellular polymeric substances (EPSs) and improving the salinity tolerance of bacteria and algae. This study centered on the mechanisms of membrane fouling mitigation via the microalgal–bacterial interactions in the MBSS, including improving the pollutant removal, optimizing the system parameters, and controlling the gel layer formation. Moreover, the contribution of electrochemistry to decreasing the inhibitory effects of high-salinity stress was investigated in the MBSS. Furthermore, patterns of shifts in microbial communities and the impacts have been explored using metagenomic technology. Finally, this review aims to offer new insights for membrane fouling mitigation in actual maricultural wastewater treatment. Full article

Background/Objectives: Dental practitioners widely use dental implants to treat traumatic cases. Titanium implants are currently the most popular choice among dental practitioners and surgeons. The discovery of newer polymeric materials is also influencing the interest of dental professionals in alternative options. A comparative study between existing titanium implants and newer polymeric materials can enhance professionals’ ability to select the most suitable implant for a patient’s treatment. This study aimed to investigate material property advantages of high-performance thermoplastic biopolymers such as PEEK and PEKK, as compared to the time-tested titanium implants, and to find the most suitable and economically fit implant material. Methods: Three distinct implant material properties were assigned—PEEK, PEKK, and commercially pure titanium (CP Ti-55)—to dental implants measuring 5.5 mm by 9 mm, along with two distinct titanium (TI6AL4V) abutments. Twelve three-dimensional (3D) models of bone blocks, representing the mandibular right molar area with Osseo-integrated implants were created. The implant, abutment, and screw were assumed to be linear; elastic, isotropic, and orthotropic properties were attributed to the cancellous and cortical bone. Twelve model sets underwent a three-dimensional finite element analysis to evaluate von Mises stress and total deformation under 250 N vertical and oblique (30 degree) loads on the top surface of each abutment. Results: The study revealed that the time-tested titanium implant outperforms PEEK and PEKK in terms of marginal bone preservation, while PEEK outperforms PEKK. Conclusions: This study will assist dental practitioners in selecting implants from a variety of available materials and will aid researchers in their future research. Full article

Background: This study aimed to assess the impact of methacrylate-functionalized polyhedral oligomeric silsesquioxanes dispersed in nanosilica (MA/Ns-POSS) on the mechanical properties of light-curable dental resins and composites. The primary goal was to evaluate how different concentrations of MA/Ns-POSS (0.5–20 wt.%) affect the hardness, flexural strength, modulus, diametral tensile strength, polymerization shrinkage stress, and degree of conversion of these materials. Methods: A mixture of Bis-GMA, UDMA, TEGDMA, HEMA, and camphorquinone, with a tertiary amine as the photoinitiator, was used to create resin and composite samples, incorporating 45 wt.% silanized silica for the composites. Hardness (Vickers method, HV), flexural strength (FS), and flexural modulus (E_f) were assessed using three-point bending tests, while diametral tensile strength (DTS) polymerization shrinkage stresses (PSS), and degree of conversion (DC) analysis were analyzed for the composites. Results: The results showed that resins with 10 wt.% MA/Ns-POSS exhibited the highest E_f and FS values. Composite hardness peaked at 20 wt.% MA/Ns-POSS, while DTS increased up to 2.5 wt.% MA/Ns-POSS but declined at higher concentrations. PSS values decreased with increasing MA/Ns-POSS concentration, with the lowest values recorded at 15–20 wt.%. DC analysis also showed substantial improvement for 15–20 wt.% Conclusion: Incorporating MA/Ns-POSS improves the mechanical properties of both resins and composites, with 20 wt.% showing the best results. Further studies are needed to explore the influence of higher additive concentrations. Full article

Difficult, extreme operating conditions of parabolic antennas under precipitation and sub-zero temperatures require the creation of effective heating systems. The purpose of the research is to develop a multilayer coating containing two metal-ceramic layers, epoxy composite layers, carbon fabric, and an outer layer of basalt fabric, which allows for effective heating of the antenna, and to study the properties of this coating. The multilayer coating was formed on an aluminum base that was subjected to abrasive jet processing. The first and second metal-ceramic layers, Al₂O₃ + 5% Al, which were applied by high-speed multi-chamber cumulative detonation spraying (CDS), respectively, provide maximum adhesion strength to the aluminum base and high adhesion strength to the third layer of the epoxy composite containing Al₂O₃. On this not-yet-polymerized layer of epoxy composite containing Al₂O₃, a layer of carbon fabric (impregnated with epoxy resin) was formed, which serves as a resistive heating element. On top of this carbon fabric, a layer of epoxy composite containing Cr₂O₃ and SiO₂ was applied. Next, basalt fabric was applied to this still-not-yet-polymerized layer. Then, the resulting layered coating was compacted and dried. To study this multilayer coating, X-ray analysis, light and raster scanning microscopy, and transmission electron microscopy were used. The thickness of the coating layers and microhardness were measured on transverse microsections. The adhesion strength of the metal-ceramic coating layers to the aluminum base was determined by both bending testing and peeling using the adhesive method. It was established that CDS provides the formation of metal-ceramic layers with a maximum fraction of lamellae and a microhardness of 7900–10,520 MPa. In these metal-ceramic layers, a dispersed subgrain structure, a uniform distribution of nanoparticles, and a gradient-free level of dislocation density are observed. Such a structure prevents the formation of local concentrators of internal stresses, thereby increasing the level of dispersion and substructural strengthening of the metal-ceramic layers’ material. The formation of materials with a nanostructure increases their strength and crack resistance. The effectiveness of using aluminum, chromium, and silicon oxides as nanofillers in epoxy composite layers was demonstrated. The presence of structures near the surface of these nanofillers, which differ from the properties of the epoxy matrix in the coating, was established. Such zones, specifically the outer surface layers (OSL), significantly affect the properties of the epoxy composite. The results of industrial tests showed the high performance of the multilayer coating during antenna heating. Full article

Inflammatory bowel disease (IBD) is characterized by oxidative stress imbalance and intestinal barrier disruption. Reducing excessive ROS has become a promising therapeutic strategy. Compared with conventional polyphenols, nanomaterials offer greater stability and bioavailability for ROS scavenging. Here, ellagic acid (EA) was converted into uniform nanoparticles (EAs) with reactive oxygen scavenging capacity through horseradish peroxidase (HRP)-mediated oxidative polymerization and subsequently encapsulated in the anti-gastric acid hydrogel F-DP to obtain the hybrid system F-DP@EAs. EAs reduced ROS, MDA, NO, IL-1β, and TNF-α levels in vitro, while increasing IL-4 and IL-10 expression, thus alleviating inflammation. Herein, F-DP@EAs prolonged intestinal retention time and exerted superior protective effects in the DSS-induced colitis model. Oral F-DP@EAs lowered DAI, preserved colon length, increased glutathione (GSH) and superoxide dismutase (SOD), decreased NO and MDA, restored zonula occludens-1 (ZO-1), and reduced mucosal lesions. These findings demonstrate that combining nanoparticle and hydrogel technologies markedly enhances the preventive and protective efficacy of EA, highlighting F-DP@EAs as a promising candidate for future IBD therapy. Full article

The creep behavior of thermoplastic polymeric materials is highly dependent on loading conditions, which must be accounted for in the intrinsic model. In this paper, fractional creep models have been developed to describe the temperature/stress-dependent creep/creep–recovery and accelerated creep damage behavior, with the construction of a criterion correlating model parameters with temperature and initial stress. The fractional order in the fractional creep/creep–recovery model can be physically interpreted by the well-known master curve, and the creep rupture time can be predicted by combining the Monkman–Grant law with the fractional creep damage model. Extensive experimental data are employed to substantiate the model’s applicability under different loading conditions. Moreover, a comparative analysis highlights the proposed model’s superior simplicity and performance over existing models. Full article

The human PrimPol counteracts DNA replication stress by repriming DNA synthesis when fork progression is hindered by UV light or hydroxyurea treatment, or by encountering complex DNA structures, such as G-quadruplexes, R-loops, or interstrand crosslinks. The Mus musculus PrimPol (MmPrimPol) shares a high degree of amino acid similarity with its human ortholog; however, as shown here, MmPrimPol exhibits a more powerful primase activity compared to the human enzyme. Such a robust primase activity relies on an enhanced ability to bind the 5′ site nucleotide, and consequently to form initial dimers and further mature primers. Additionally, a shorter linker between the AEP core and the Zn finger domain (ZnFD) in the murine homolog likely promotes a constitutive closing of these domains into a primase-ready configuration. Consequently, a reinforced close configuration of the ZnFD would explain why MmPrimPol has a more robust primase, but a very limited DNA polymerization on an existing primer. Full article

This study introduces and validates a comparative experiment-based method for determining the effective thickness of composite glass, including polymeric laminated glass (with polyvinyl butyral (PVB) and SentryGlas^® (SGP) interlayers) and vacuum glazing. This method employs comparative four-point bending tests, defining effective thickness by equating the bending stress of a composite specimen to that of a reference monolithic glass specimen under identical loading and boundary conditions. Specimens with varying configurations (glass thicknesses of 5 mm, 6 mm and 8 mm) were tested using non-destructive four-point bending tests under a multi-stage loading protocol (100 N–1000 N). Strain rosettes measured maximum strains at each loading stage to calculate bending stress. Analysis of the bending stress state revealed that vacuum glazing and SGP laminated glass exhibit superior load-bearing capacity compared to PVB laminated glass. The proposed method successfully determined the effective thickness for both laminated glass and vacuum glazing. Furthermore, results demonstrate that employing a 12 mm monolithic reference glass provides the highest accuracy for effective thickness determination. Theoretical bending stress calculations using the effective thickness derived from the 12 mm reference glass showed less than 10% deviation from experimental values. Conversely, compared to established standards and empirical formulas, the proposed method offers superior accuracy, particularly for vacuum glazing. Additionally, the mechanical properties of the viscoelastic interlayers (PVB and SGP) were investigated through static tensile tests and dynamic thermomechanical analysis (DMA). Distinct tensile behaviors and differing time-dependent shear transfer capacities between the two interlayer materials are found out. Key factors influencing the reliability of the method are also discussed and analyzed. This study provides a universally practical and applicable solution for accurate and effective thickness estimation in composite glass design. Full article

The fatigue resistance of cement-stabilized macadam (CSM) plays a vital role in ensuring the long-term durability of pavement structures. However, limited cementitious material (CM) content often leads to high packing voids, which significantly compromise fatigue performance. Existing studies have rarely explored the coupled mechanism between pore structure and fatigue behavior, especially in the context of solid-waste-based CMs. In this study, a cost-effective alkali-activated sludge gasification slag (ASS) was proposed as a sustainable CM substitute for ordinary Portland cement (OPC) in CSM. A dual evaluation approach combining cross-sectional image analysis and fatigue loading tests was employed to reveal the effect pathway of void structure optimization on fatigue resistance. The results showed that ASS exhibited excellent cementitious reactivity, forming highly polymerized C-A-S-H/C-S-H gels that contributed to a denser microstructure and superior mechanical performance. At a 6% binder dosage, the void ratio of ASS–CSM was reduced to 30%, 3% lower than that of OPC–CSM. The 28-day unconfined compressive strength and compressive resilient modulus reached 5.7 MPa and 1183 MPa, representing improvements of 35.7% and 4.1% compared to those of OPC. Under cyclic loading, the ASS system achieved higher energy absorption and more uniform stress distribution, effectively suppressing fatigue crack initiation and propagation. Moreover, the production cost and carbon emissions of ASS were 249.52 CNY/t and 174.51 kg CO₂e/t—reductions of 10.9% and 76.2% relative to those of OPC, respectively. These findings demonstrate that ASS not only improves fatigue performance through pore structure refinement but also offers significant economic and environmental advantages, providing a theoretical foundation for the large-scale application of solid-waste-based binders in pavement engineering. Full article

This study investigates a hybrid manufacturing approach that combines 3D printing and injection molding to extend the limitations of each individual technique. Injection molding is often limited by high initial tooling costs, long lead times, and restricted geometric flexibility, whereas 3D-printed molds tend to suffer from material degradation, extended cooling times, and lower surface quality. By integrating 3D-printed molds into the injection-molding process, this hybrid method enables the production of complex geometries with improved cost-efficiency. The approach is demonstrated using a range of polymeric materials, including ABS, nylon, and polyurethane foam—each selected to enhance the mechanical and thermal performance of the final products. Finite element method (FEM) analysis was conducted to assess thermal distribution, deformation, and stress during manufacturing. Results indicated that both temperature and stress remained within safe operational limits for 3D-printed materials. An economic analysis revealed substantial cost savings compared to fully 3D-printed components, establishing hybrid manufacturing as a viable and scalable alternative. This method offers broad industrial applicability, delivering enhanced mechanical properties, design flexibility, and reduced production costs. Full article

Reactive nitrogen species (RNS), particularly peroxynitrite (ONOO⁻), play a central role in post-translational modifications (PTMs) of proteins, including fibrinogen, a key component of the coagulation cascade. This review explores the structural and functional consequences of fibrinogen nitration, with a focus on its impact on clot formation, morphology, mechanical stability, and fibrinolysis. Nitration, primarily targeting tyrosine residues within functional domains of the Aα, Bβ, and γ chains, induces conformational changes, dityrosine crosslinking, and aggregation into high molecular weight species. These modifications result in altered fibrin polymerization, the formation of porous and disorganized clot networks, reduced mechanical resilience, and variable susceptibility to fibrinolysis. Moreover, nitrated fibrinogen may affect interactions with platelets and endothelial cells, although current evidence remains limited. Emerging clinical studies support its role as both a prothrombotic mediator and a potential biomarker of oxidative stress in cardiovascular and inflammatory diseases. Finally, we explore both pharmacological interventions, such as NOX inhibitors, and natural antioxidant strategies at counteracting fibrinogen nitration. Overall, fibrinogen nitration emerges as a critical molecular event linking oxidative stress to thrombotic risk. Full article

Embedded printing of soft materials relies on yield-stress support matrices to prevent sagging and enable freeform fabrication. The rheological parameters of the matrix material directly influence critical printing outcomes such as strand positioning, cavity formation, structural stability, and defect suppression in embedded printing. Despite widespread use of Carbopol^® formulations, a systematic rheological characterization of ETD2020 across relevant polymer concentrations and pH levels for embedded printing is lacking. Here, we implement a full-factorial design with polymer concentrations from $0.1\mathrm{wt}\%$ to $0.9\mathrm{wt}\%$ and triethanolamine dosages of 30–$50$µL per $100\mathrm{g}$. Steady-shear ($0.001$–$200{\mathrm{s}}^{-1}$) and oscillatory ($1\mathrm{Hz}$) rheometry yielded Herschel–Bulkley parameters ${\tau }_y$, k, n as well as storage and loss modulus $G^{\prime }$/$G^{\prime \prime }$. All formulations exhibited pronounced shear-thinning, with ${\tau }_y$ increasing nonlinearly from <$1\mathrm{Pa}$ to $41.1\mathrm{Pa}$ and $G^{\prime }$ reaching $\approx 400\mathrm{Pa}$ at $0.9\mathrm{wt}\%$. A five-hour window of invariant rheology was identified, followed by a $\Delta {\tau }_y\approx 10\mathrm{Pa}$ increase after five days, indicating delayed polymerization. The comprehensive material characterization defines a rheological window for ETD2020 and facilitates simulation-based modeling and the targeted tuning of matrix properties. Heatmaps provide an interpolated depiction of combined carbomer and triethanolamine concentrations, enabling tunable support matrices for embedded printing. Full article

To address the deficiencies of traditional emulsified asphalt-pavement maintenance material in cohesive strength, high-temperature rutting resistance, as well as adhesion to aggregates, this study developed waterborne epoxy resin-modified emulsified asphalt (WEA) binders using a two-component waterborne epoxy resin (WER) and systematically investigated their modification mechanisms and pavement performance. The results indicated that WER emulsions and curing agents could polymerize to form epoxy resin within the emulsified asphalt dispersion medium, with the modification process dominated by physical interactions. When the WER content exceeded 12%, a continuous modifier network structure was established within the emulsified asphalt. The epoxy resin formed after curing could significantly increase the polarity component of the binder, thereby increasing the surface free energy. The linear viscoelastic range of the WEA binder exhibited a negative correlation with the dosage of the WER modifier. Notably, when the WER content exceeded 6%, the high-temperature stability (rutting resistance and elastic recovery performance) of the binder was significantly enhanced. Concurrently, stress sensitivity and frequency dependence gradually decrease, demonstrating superior thermomechanical stability. Furthermore, WER significantly enhanced the interfacial interaction and adhesion between the binder and aggregates. However, the incorporation of WER adversely affects the low-temperature cracking resistance of the binder, necessitating strict control over its dosage in practical applications. Full article

Homocysteinylation, a post-translational modification involving the covalent attachment of homocysteine to proteins, has emerged as a critical mechanism linking hyperhomocysteinemia to thrombotic disease. This review focuses on the homocysteinylation of fibrinogen, a key coagulation factor, and its impact on clot structure and function. Evidence indicates that elevated homocysteine levels can induce significant changes in fibrin architecture, promoting the formation of dense, rigid clots with reduced permeability and impaired fibrinolytic susceptibility, thus fostering a prothrombotic environment. However, inconsistencies in reported effects on fiber diameter and polymerization kinetics highlight the need for standardized experimental protocols. Advances in proteomics and high-resolution imaging are expected to clarify the molecular underpinnings of these modifications. Moreover, homocysteinylation intersects with oxidative stress and may serve as a mechanistic bridge between metabolic and vascular dysfunction. Understanding its role not only enhances insight into thrombosis but also opens avenues for biomarker discovery and targeted therapies in cardiovascular and potentially neurological disorders. Full article

Personal protection from mosquitos is dominated by topically applied aerosol sprays or lotions, which demonstrate efficacy durations of no longer than 10 h, thus encouraging the research and development of long-term insect-repelling devices. Repellent-loaded polymeric matrices have driven the development of insect-repelling apparel fabrics; however, most efforts either fail to offer the tensile properties demanded from apparel applications or only demonstrate repellency durations for multiple days. This study utilizes poly-D,L-lactic acid (PDLLA) as a compatibilizer between Nylon 12 and nootkatone for enhanced nootkatone retention throughout fabric manufacturing processes. Nootkatone-infused Nylon 12/PDLLA composites demonstrate up to a 14% increase in nootkatone retention throughout fabric manufacturing compared to pure Nylon 12, underscoring the importance of polymer/substrate miscibility on substrate retention. Moreover, while nootkatone-infused Nylon 12 filaments demonstrate decreasing tensile stress at breaks with increasing nootkatone content, Nylon 12/PDLLA filaments exhibit similar tensile properties regardless of nootkatone content. The PDLLA domains are suspected to behave as reservoirs for excess nootkatone to prevent its role as a defect within the Nylon 12 matrix. The resulting knits exhibit significant mosquito repellencies over 24 h dependent on the nootkatone concentration, thus demonstrating potential to embed insect repellent within high-performance polymeric filaments with effective mosquito repellencies. Therefore, the incorporation of PDLLA as a compatibilizer holds significant potential for enhanced nootkatone retention during Nylon 12 fabric manufacturing. Full article