Search Results (28)

Gallium (Ga)-based liquid metal (LM) composites, particularly those based on eutectic gallium–indium (EGaIn) and related alloys, have emerged as a promising materials platform for soft and deformable energy storage owing to their unique combination of metallic conductivity, fluidic deformability, and adaptive interfaces. Despite rapid advances in LM-enabled devices, binders remain insufficiently understood and are still commonly regarded as passive structural components. Here, we present a comprehensive binder-centered perspective for LM composites, establishing the binder as a key regulator of electro-chemo-mechanical coupling, interfacial stability, transport behavior, and processability in soft energy systems. We show that tailored binder chemistries in Ga-based LM systems—including stretchable batteries, printable conductors, and soft electrochemical devices—govern LM droplet dispersion, suppress coalescence and leakage, and preserve conductive percolation under large deformation, while enabling room-temperature fabrication and printability through rheological regulation and interfacial wetting. Beyond mechanical confinement, emerging binder functionalities—including dynamic bonding, supramolecular interactions, ionically conductive networks, and reversible polymer architectures—enable self-healing interfaces, adaptive transport pathways, and robust adhesion in deformable devices. By integrating recent advances in stretchable batteries, flexible supercapacitors, printable electronics, and multifunctional soft energy systems, we establish a unified multiscale framework linking binder molecular design to device-level electrochemical and mechanical performance. We further discuss sustainability and manufacturing considerations, including recyclable polymer networks, low-temperature fabrication, and scalable processing strategies. Finally, we outline current challenges and future opportunities toward programmable binder systems with tunable viscoelasticity, interfacial reactivity, and adaptive functionality. This Review establishes binder-centered engineering as a key pathway for transforming LM composites from proof-of-concept materials into resilient, manufacturable, and multifunctional soft energy technologies for wearable, stretchable, and biointegrated electronics. Full article

Lanthanum silicate oxyapatite (LSO) is a promising oxide ion conductor for low-temperature-operating electrochemical devices owing to its high ionic conductivity along the c-axis. However, the fabrication of thin films with controlled crystallographic orientation remains challenging. In this study, polymer-assisted deposition (PAD), a solution-based technique offering precise microstructural and compositional control, was employed to fabricate c-axis-oriented LSO thin films. The fabrication of undoped LSO and the effects of Al and Mg incorporation on its microstructure, orientation, and ionic conductivity were systematically investigated. Undoped LSO thin films crystallised with a preferential c-axis orientation in the annealing temperature range of 800 and 1100 °C, and scanning transmission electron microscopy observations revealed a highly crystalline, void-free microstructure. Upon annealing at 1200 °C, the undoped LSO exhibited columnar grains with anisotropic in-plane grain growth, whereas Al- or Mg-doped LSO suppressed anisotropic in-plane grain growth and retained an out-of-plane c-axis orientation. The undoped LSO showed higher in-plane ionic conductivity than the doped thin films, consistent with their distinct crystallographic orientations. These results demonstrate that PAD provides a viable pathway for tailoring the microstructure and the composition of LSO thin films, thereby facilitating their applications in solid oxide electrochemical devices. Full article

Conducting polymers (CPs) have become cornerstone materials in electrochemical sensors and biosensors due to their mixed ionic–electronic conduction, mechanical softness, and intrinsic biointerface compatibility. This review provides a comprehensive and critical overview of the field, tracing the evolution of CP-based devices from classical poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), polyaniline (PANI), and polypyrrole (PPy) electrodes to emerging nanostructured, hybrid, wearable, and transient systems. We discuss fundamental charge-transport mechanisms, doping strategies, structure–property relationships, and the role of morphology and biofunctionalization in dictating sensitivity, selectivity, and stability. Particular emphasis is placed on reliability challenges—including drift, dopant leaching, environmental degradation, and biofouling—and on the current lack of standardized metrology, which hampers cross-study comparability. We propose a framework for rigorous calibration, reference electrode design, and data reporting, enabling quantitative benchmarking across materials and architectures. To support meaningful cross-platform comparison, representative performance envelopes—including conductivity, limit of detection, sensitivity, selectivity strategies, and operational stability—are critically benchmarked across major CP families and sensing modalities. Finally, we explore future directions such as organic mixed ionic–electronic conductors, biohybrid and living polymer interfaces, Artificial Intelligence-driven modeling, and sustainable transient electronics. Full article

Solid-state batteries (SSBs) are regarded as one of the most promising next-generation energy storage technologies due to their high energy density and improved safety. To achieve this goal, the development of solid-state electrolytes with high ionic conductivity and low interfacial resistance is essential. In recent years, composite polymer electrolytes (CPEs) have garnered extensive attention due to their ability to combine the intrinsic flexibility of polymers with the enhanced ionic conductivity and mechanical robustness provided by inorganic fillers. Metal–organic frameworks (MOFs), characterized by tunable pore structures, high surface areas, and excellent thermal and mechanical stability, are considered ideal fillers for constructing MOF–polymer composite electrolytes (MPCEs). This review summarizes the performance enhancement mechanisms of MPCEs and strategies for electrode–electrolyte interface stability. First, the primary preparation methods of MPCEs are introduced. Subsequently, the roles of MOFs in regulating ionic transport, suppressing dendrite growth, improving electrochemical stability, and optimizing the solid electrolyte interphase (SEI) layer are discussed. In addition, various interface engineering strategies are highlighted, including in situ polymerization of the polymer matrix, in situ growth of MOF fillers, integration of liquid plasticizers forming gel-like ionic conductor, and design of composite electrode to enhance interfacial compatibility and stability. Finally, the significant challenges and future research directions of MPCEs are outlined. This review provides valuable insights into the rational design of MPCEs and offers guidance for the development and practical application of high-performance SSBs. Full article

Nanoparticle superlattices—periodic assemblies of uniformly spaced nanocrystals—bridge the nanoscale precision of individual particles with emergent collective properties akin to those of bulk materials. Recent advances demonstrate that multivalent ions and charged polymers can guide the co-assembly of nanoparticles, imparting electrostatic gating and enabling semiconductor-like behavior. However, the specific roles of anion geometry, valency, and charge density in mediating ion transport remain unclear. Here, we employ coarse-grained molecular dynamics simulations to investigate how applied electric fields (0–0.40 V/nm) modulate ionic conductivity and spatial distribution in trimethylammonium-functionalized gold nanoparticle superlattices assembled with four phosphate anions of distinct geometries and charges. Our results reveal that linear anions outperform ring-shaped analogues in conductivity due to higher charge densities and weaker interfacial binding. Notably, charge density exerts a greater influence on ion mobility than size alone. Under strong fields, anions accumulate at nanoparticle interfaces, where interfacial adsorption and steric constraints suppress transport. In contrast, local migration is governed by geometrical confinement and field strength. Analyses of transition probability and residence time further indicate that the rigidity and delocalized charge of cyclic anions act as mobility barriers. These findings provide mechanistic insights into the structure–function relationship governing ion transport in superlattices, offering guidance for designing next-generation ion conductors, electrochemical sensors, and energy storage materials through anion engineering. Full article

Intrinsically stretchable polymer ionic conductors (PICs) hold significant application prospects in fields such as flexible sensors, energy storage devices, and wearable electronic devices, serving as promising solutions to prevent mechanical failure in flexible electronics. However, the development of PICs is hindered by an inherent trade-off between mechanical robust and electrical properties. Cellulose, renowned for its high mechanical strength, tunable chemical groups, abundant resources, excellent biocompatibility, and remarkable recyclability and biodegradability, offers a powerful strategy to decouple and enhance mechanical and electrical properties. This review presents recent advances in cellulose-based polymer ionic conductors (CPICs), which exhibit exceptional design versatility for flexible electrodes and strain sensors. We systematically discuss optimization strategies to improve their mechanical properties, electrical conductivity, and environmental stability while analyzing the key factors such as sensitivity, gauge factor, strain range, response time, and cyclic stability, where strain sensing refers to a technique that converts tiny deformations (i.e., strain) of materials or structures under external forces into measurable physical signals (e.g., electrical signals) for real-time monitoring of their deformation degree or stress state. Full article

Batteries are used as energy storage devices in various equipment. Today, research is focused on solid-state batteries (SSBs), replacing the liquid electrolyte with a solid separator. The solid separators provide electrolyte stability, no leakage, and provide mechanical strength to the battery. Separators are mostly manufactured by either traditional processes or 3D printing technologies. These processes involve making a slurry of plastic, active and conductive material and usually adding a plasticizer when making thin films or filaments for 3D printing. This study investigates the additive manufacturing of solid-state electrolytes (SSEs) by employing fused deposition modeling (FDM) with recyclable, bio-derived polylactic acid (PLA) filaments. Precise control of macro-porosity is achieved by systematically varying key process parameters, including raster orientation, infill percentage, and interlayer adhesion conditions, thereby enabling the formation of tunable, interconnected pore networks within the polymer matrix. Following 3D printing, these engineered porous frameworks are infiltrated with lithium hexafluorophosphate (LiPF₆), which functions as the active ionic conductor. A tailored thermal sintering protocol is then applied to promote solid-phase fusion of the embedded salt throughout the macro-porous PLA scaffold, resulting in a mechanically robust and ionically conductive composite separator. The electrochemical ionic conductivity and structural integrity of the sintered SSEs are characterized through electrochemical impedance spectroscopy (EIS) and standardized mechanical testing to assess their suitability for integration into advanced solid-state battery architectures. The solid-state separator achieved an average ionic conductivity of 2.529 × 10⁻⁵ S·cm⁻¹. The integrated FDM-sintering process enhances ion exchange at the electrode–electrolyte interface, minimizes material waste, and supports cost-efficient, fully recyclable component fabrication. Full article

As conductive materials, ionogels have attracted significant attention for their potential applications in flexible wearable electronics. However, preparing an ionogel with mechanical properties akin to human skin while also achieving transparency, adhesion, and low hysteresis through simple processes remains challenging. Here, we introduce a multifunctional ionogel synthesized via a one-step photopolymerization method. By leveraging the good compatibility between the ionic liquid and the polymer network, as well as the hydrogen bonding and chemical crosslinking within the gel network, we achieved an ionogel with high transparency (>98%), stretchability (fracture strain of 19), low hysteresis (<5.83%), strong adhesion, robust mechanical stability, excellent electrical properties, a wide operating temperature range, and a tunable modulus (1–103 kPa) that matches human skin. When used as a conductor in soft actuators, the ionogel enabled a large area strain of 36% and a fast electromechanical conversion time of less than 1 s. The actuator demonstrated good actuation performance with voltage and frequency dependence, electrochemical stability, and outstanding durability over millions of cycles. This study provides a simple and effective method to produce multifunctional ionogels with tailored mechanical properties that match those of human skin, paving the way for their application in flexible wearable electronics. Full article

The rational design of ordered chromogenic supramolecular polymeric systems is critical for the advancement of next-generation stimuli-responsive, optical, and semiconducting materials. Previously, we reported the design of a stimuli-responsive, lamellar self-assembled platform composed of an imidazole-appended perylene diimide of varying methylene spacer length (n = 3, 4, and 6) and a commercially available diacid-functionalized diacetylene monomer, 10, 12 docosadiynedioic acid, in a 1:1 molar ratio. Herein, we expound on the importance of the composition of the imidazole-appended perylene diimide of varying methylene spacer length (n = 3, 4, and 6) and 10, 12 docosadiynedioic acid in the ratio of 2:1 to the supramolecular self-assembly, final morphology, and properties. Topochemical polymerization of the drop-cast films by UV radiation yielded blue-phase polydiacetylene formation, and subsequent thermal treatment of the films produced a thermoresponsive blue-to-red phase transformation. Differential scanning calorimetry (DSC) studies revealed a dual dependence of the methylene spacer length and stimuli treatment (UV and/or heat) on the thermal transitions of the films. Furthermore, small-angle X-ray scattering (SAXS) and wide-angle X-ray scattering (WAXS) showed well-defined hierarchical semiconducting nanostructures with interconnected “chessboard”-patterned lamellar stacking. Upon doping with an ionic liquid, the 2:1 platform showed higher ionic conductivity than the previous 1:1 one. The results presented here illustrate the importance of the composition and architecture to the ionic domain connectivity and ionic conductivity, which will have far-reaching implications for the rational design of semiconducting polymers for energy applications including fuel cells, batteries, ion-exchange membranes, and mixed ionic conductors. Full article

Sodium-ion batteries (SIBs) have garnered significant attention as a cost-effective and sustainable alternative to lithium-ion batteries (LIBs) due to the abundance and eco-friendly extraction of sodium. Despite the larger ionic radius and heavier mass of sodium ions, SIBs are ideal for large-scale applications, such as grid energy storage and electric vehicles, where cost and resource availability outweigh the constraints of size and weight. A critical component in SIBs is the electrolyte, which governs specific capacity, energy density, and battery lifespan by enabling ion transport between electrodes. Among various electrolytes, composite polymer electrolytes (CPEs) stand out for their non-leakage and non-flammable nature and tunable physicochemical properties. The incorporation of NASICON (Na Super Ionic CONductor) fillers into polymer matrices has shown transformative potential in enhancing SIB performance. NASICON fillers improve ionic conductivity by forming continuous ion conduction pathways and reduce polymer matrix crystallinity, thereby facilitating higher sodium-ion mobility. Additionally, these fillers enhance the mechanical properties and electrochemical performance of CPEs. Hence, this review focuses on the pivotal roles of NASICON fillers in optimizing the properties of CPEs, including ionic conductivity, structural integrity, and electrochemical stability. The mechanisms underlying sodium-ion transport facilitated by NASICON fillers in CPE will be explored, with emphasis on the influence of filler morphology and composition on electrochemical properties. By scrutinizing the recent findings, this review underscores the potential of NASICON-based composite polymer electrolytes as appropriate material for the development of advanced sodium-ion batteries. Full article

Soft matter electrolytes could solve the safety problem of widely used liquid electrolytes in Li-ion batteries which are burnable upon heating. Simultaneously, they could solve the problem of poor contact between electrodes and solid electrolytes. However, the ionic conductivity of soft matter electrolytes is relatively low when mechanical properties are relatively good. In the present review, mechanisms of ionic conduction in soft matter electrolytes are discussed in order to achieve higher ionic conductivity with sufficient mechanical properties where soft matter electrolytes are defined as polymer electrolytes and polymeric or inorganic gel electrolytes. They could also be defined by Young’s modulus from about ${10}^5$ Pa to ${10}^9$ Pa. Many soft matter electrolytes exhibit VFT (Vogel–Fulcher–Tammann) type temperature dependence of ionic conductivity. VFT behavior is explained by the free volume model or the configurational entropy model, which is discussed in detail. Mostly, the amorphous phase of polymer is a better ionic conductor compared to the crystalline phase. There are, however, some experimental and theoretical reports that the crystalline phase is a better ionic conductor. Some methods to increase the ionic conductivity of polymer electrolytes are discussed, such as cavitation under tensile deformation and the microporous structure of polymer electrolytes, which could be explained by the conduction mechanism of soft matter electrolytes. Full article

Lithium-based electrolytes are, at least from a thermodynamic standpoint, the most suitable ion-transport materials for energy storage systems. However, lithium-based ionic conductors suffer from safety concerns, and the limited availability of lithium in the Earth’s crust is at the root of the need to consider alternative metal ions. Notably, sodium stands out as the sixth most-prevalent element; therefore, when considering mineral reserves, it as a very attractive candidate as an alternative to the status quo. Even if the specific energy and energy density of sodium are indeed inferior with respect to those of lithium, there is substantial economic appeal in promoting the use of the former metal in stationary energy storage applications. For these reasons, the promise of sodium is likely to extend to other commercial applications, including portable electronics, as well as hybrid and electric vehicles. Widely used organic liquid electrolytes, regardless of their chosen metal cation, are disadvantageous due to leakage, evaporation, and high flammability. Polymer electrolytes are acknowledged as the most effective candidates to overcome these obstacles and facilitate the advancement of next-generation energy storage applications. In this contribution, an in-depth and comprehensive review of sodium polymer electrolytes for primary and secondary batteries is proposed. The overarching goal was to gain insight into successful synthetic strategies and their implications for conduction parameters and conductivity mechanisms. The focus lies on solid, gel, and composite polymer electrolytes. Our hope is that the proposed discussion will be helpful to all operators in the field, whether in tackling fundamental research problems or resolving issues of practical significance. Full article

The use of cation-exchange membranes as electrolytes for lithium metal batteries can prevent the formation of lithium dendrites during extended cycling and guarantee safe battery operation. In our study, the Nafion-212 membrane in lithium form solvated by a mixture of ethylene carbonate and propylene carbonate (EC-PC) was used as an electrolyte in a lithium metal battery with the LiFePO₄ cathode. The Nafion-212-EC-PC electrolyte is electrochemically stable up to 6 V, indicating its suitability for high-energy density batteries. It has an ionic conductivity of 1.9 × 10⁻⁴ S/cm at 25 °C and a high lithium transference number. The symmetric Li|Nafion-212-EC-PC|Li cell shows a very low overvoltage of ~0.3 V at a current density of ±0.1 mA/cm². At 25 °C, the LiFePO₄|Nafion-212-EC-PC|Li battery exhibits a capacity of 141, 136, 125, and 100 mAh/g at 0.1, 0.2, 0.5, and 1C rates, respectively. It maintains a capacity of 120 mAh/g at 0 °C and 0.1C with stable performance for 50 charge/discharge cycles. The mechanism of conductivity and capacity retention at low temperatures is discussed. Full article

Hydrogels are three-dimensional polymer networks with excellent flexibility. In recent years, ionic hydrogels have attracted extensive attention in the development of tactile sensors owing to their unique properties, such as ionic conductivity and mechanical properties. These features enable ionic hydrogel-based tactile sensors with exceptional performance in detecting human body movement and identifying external stimuli. Currently, there is a pressing demand for the development of self-powered tactile sensors that integrate ionic conductors and portable power sources into a single device for practical applications. In this paper, we introduce the basic properties of ionic hydrogels and highlight their application in self-powered sensors working in triboelectric, piezoionic, ionic diode, battery, and thermoelectric modes. We also summarize the current difficulty and prospect the future development of ionic hydrogel self-powered sensors. Full article

Covalent organic frameworks (COFs) are a class of crystalline porous organic polymers with periodic networks that are constructed from small molecular units via covalent bonds, which have low densities, high porosity, large specific surface area, and ease of functionalization. The one-dimension nanochannels in COFs offer an effective means of transporting lithium ions while maintaining a stable structure over a wide range of temperatures. As a new category of ionic conductors, COFs exhibit unparalleled application potential in solid-state electrolytes. Here, we provide a comprehensive summary of recent applications and research progress for COFs in solid-state electrolytes of lithium metal batteries and discuss the possible development directions in the future. This review is expected to provide theoretical guidance for the design of high-performance solid-state electrolytes. Full article