Search Results (103)

Soil contamination with petroleum hydrocarbons is a serious environmental issue, necessitating the development of effective and environmentally friendly remediation methods that align with the principles of sustainable development. This study investigated the impact of selected biosurfactants on the efficiency of the biodegradation of total petroleum hydrocarbons (TPH) and polycyclic aromatic hydrocarbons (PAHs) in contaminated soil. Six biosurfactants—poly-γ-glutamic acid (γ-PGA), rhamnolipid, surfactin, a mixture of γ-PGA, rhamnolipids, and surfactin (PSR), as well as two commercial formulations (JBR 425 and JBR 320)—were evaluated in combination with a bacterial consortium. Biodegradation experiments were conducted under laboratory conditions for a 90-day period. The effectiveness of the tested biosurfactants was assessed using respirometric analysis, the chromatographic determination of the residual hydrocarbon content, and toxicity assays. The results showed that the application of a bacterial consortium enriched with a mixture of biosurfactants PSR (a biosurfactant concentration in the inoculating mixture: 5 g/dm³) was the most effective approach, resulting in an oxygen uptake of 5164.8 mgO₂/dm³ after 90 days, with TPH and PAH degradation rates of 77.3% and 70.32%, respectively. Phytotoxicity values decreased significantly, with TU values ranging from 6.32 to 4.62 (growth inhibition) and 3.77 to 4.13 (germination). Toxicity also decreased in the ostracodtoxkit test (TU = 4.35) and the Microtox SPT test (TU = 4.91). Among the tested biosurfactants, surfactin showed the least improvement in its bioremediation efficiency. Under the same concentration as in the PSR mixture, the oxygen uptake was 3446.7 mgO₂/dm³, with TPH and PAH degradation rates of 60.64% and 52.64%, respectively. In the system inoculated with the bacterial consortium alone (without biosurfactants), the biodegradation efficiency reached 44.35% for TPH and 36.97% for PAHs. The results demonstrate that biosurfactants can significantly enhance the biodegradation of petroleum hydrocarbons in soil, supporting their potential application in sustainable bioremediation strategies. Full article

Whey protein isolate (WPI) hydrogel is a promising candidate as a biomaterial for tissue engineering. Previously, WPI hydrogels containing poly-γ-glutamic acid (γ-PGA) with a molecular weight (MW) of 440 kDa demonstrated potential as scaffolds for bone tissue engineering. Here, the study compares different γ-PGA preparations of differing MW. WPI-γ-PGA hydrogels containing 40% WPI and 0%, 2.5%, 5%, 7.5%, and 10% γ-PGA were synthesised. Three γ-PGA MWs were compared, namely 10 kDa, 700 kDa, and 1100 kDa. Evidence of successful γ-PGA incorporation was demonstrated by scanning electron microscopy and Fourier transform infrared spectroscopy. Increasing γ-PGA concentration significantly improved the swelling potential of the hydrogels, as demonstrated by ratio mass increases of between 85 and 90% for each 10% variable group. Results suggested that γ-PGA delayed enzymatic proteolysis, potentially decreasing the rate of degradation. The addition of γ-PGA significantly decreased the Young’s modulus and compressive strength of hydrogels. Dental pulp mesenchymal stem cells proliferated on all hydrogels. The highest cellular growth was observed for the WPI-700 kDa γ-PGA group. Additionally, superior cell attachment was observed on all WPI hydrogels containing γ-PGA compared to the WPI control. These results further suggest the potential of WPI hydrogels containing γ-PGA as biomaterials for bone tissue engineering. Full article

In this study, a Bacillus velezensis SDU strain capable of producing poly-γ-glutamate (γ-PGA) was newly identified from the rhizosphere soil of Baimiao taro. The strain is a glutamate-independent strain and can produce polyglutamic acid in a culture medium completely free of glutamate. The hydrolyzed product of the polyglutamic acid produced is D-glutamic acid. The molecular weight of γ-PGA, estimated via the Mark–Houwink equation, was 1390 kDa. Furthermore, the molecular weight measured by Waters gel permeation chromatography with multi-angle laser light scattering (GPC–MALLS) was 1167 kDa. The production of γ-PGA and its antioxidant and tyrosine inhibition properties were investigated. The γ-PGA production reached 23.1 g/L, and the productivity was 0.77 g L⁻¹ h⁻¹. Specifically, γ-PGA exhibited superoxide anion (·O₂⁻) radical scavenging activity and tyrosinase inhibitory activity. This study introduces a promising strain and a highly efficient application method for γ-PGA, which can be broadly utilized in the pharmaceutical, food, and cosmetic industries. Full article

Rapid industrialization has led to significant environmental challenges, particularly in wastewater treatment, where the removal of heavy metal ions and organic dyes is critical. This study presents the synthesis and characterization of a high-performance hydrogel adsorbent, (nanoclay)_x@poly-γ-glutamic acid (γ-PGA)/polyethyleneimine (PEI) hydrogel adsorbent (denoted as N_xPP, x = 0, 20, 40, 60, and 80), for the efficient removal of heavy metal ions (Cu²⁺, Fe³⁺, and Zn²⁺) and organic dyes (Methylene blue, as a typical example) from wastewater. The hydrogel was prepared using a one-pot method, combining γ-PGA and PEI with varying amounts of nanoclay. The N₈₀PP hydrogel demonstrated exceptional adsorption capacities, achieving 224.37 mg/g for Cu²⁺, 236.60 mg/g for Fe³⁺, and 151.95 mg/g for Zn²⁺ within 30 min, along with 88.18 mg/g for Methylene blue within 5 h. The incorporation of nanoclay significantly enhanced the mechanical properties, with compressive strength reaching 560.49 kPa. The hydrogel exhibited excellent reusability, maintaining high adsorption capacity after five cycles. The adsorption kinetics followed a pseudo-second-order model, and the isotherms fit the Freundlich model, indicating a multilayer adsorption mechanism. This study highlights the potential of N_xPP hydrogels as a versatile and sustainable solution for wastewater treatment. Full article

This review offers an in-depth analysis of microbial γ-poly-glutamic acid (γ-PGA), highlighting its production, biosynthetic pathways, unique properties, and extensive applications in the food and health industries. γ-PGA is a naturally occurring biopolymer synthesized by various microorganisms, particularly species of Bacillus. The report delves into the challenges and advancements in cost-effective production strategies, addressing the economic constraints associated with large-scale γ-PGA synthesis. Its biocompatibility, biodegradability, and non-toxic nature make it a promising candidate for diverse industrial applications. γ-PGA’s exceptional water-holding capacity and humectant properties are key to its utility in the food industry. These features enable it to enhance the stability, viscosity, and shelf life of food products, making it a valuable ingredient in processed foods. The review highlights its ability to improve the textural quality of baked goods, stabilize emulsions, and act as a protective agent against staling. Beyond food applications, γ-PGA’s role in health and pharmaceuticals is equally significant. Its use as a drug delivery carrier, vaccine adjuvant, and biofilm inhibitor underscores its potential in advanced healthcare solutions. Full article

Wound healing is a complex biological process involving inflammation, proliferation, and remodeling phases. Effective healing is essential for maintaining skin integrity, driving the need for advanced materials like hydrogels, known for their high water retention and tunable mechanical properties. In this study, we synthesized a biocompatible composite hydrogel composed of γ-polyglutamic acid (γ-PGA) and ε-polylysine (ε-PL) through a Schiff base reaction, forming a stable crosslinked network. Its physicochemical properties, including rheological behavior and swelling capacity, were systematically evaluated. Biocompatibility was assessed via in vitro hemolysis and cytotoxicity assays, and in vivo testing was performed using a full-thickness skin defect model in Sprague Dawley (SD) rats to evaluate wound-healing efficacy. The PGA-PL hydrogel demonstrated excellent physicochemical properties, with a maximum swelling ratio of 65.6%, and biocompatibility as evidenced by low hemolysis rates (<5%) and high cell viability (>80%). It promoted wound healing by inhibiting the inflammatory response, reducing levels of the inflammatory cytokine IL-6, enhancing angiogenesis, and accelerating collagen deposition. The hydrogel showed complete biodegradation within 21 days in vivo without inducing a significant inflammatory response and significantly accelerated wound healing, achieving an 86% healing rate within 7 days compared to 67% in the control group. The PGA-PL composite hydrogel exhibits excellent mechanical strength and biocompatibility, and its effective wound-healing capabilities lay the groundwork for future development and optimization in various tissue engineering applications. Full article

Alcoholic hepatic steatosis (AHS) is a common early-stage symptom of liver disease caused by alcohol consumption. Accordingly, several aspects of AHS have been studied as potential preventive and therapeutic targets. In this study, a novel strategy was employed to inhibit fatty liver accumulation and counteract AHS through the consumption of microorganism-fermented Protaetia brevitarsis larvae (FPBs). By using an AHS rat model, we assessed the efficacy of FPB by examining the lipid profile of liver/serum and liver function tests to evaluate lipid metabolism modulation. After FPB administration, the lipid profile—including high-density lipoprotein, total cholesterol, and total triglycerides—and histopathological characteristics exhibited improvement in the animal model. Interestingly, AHS amelioration via FPBs administration was potentially associated with poly-γ-glutamic acid (PγG), which is produced by Bacillus species during fermentation. These findings support the formulation of novel natural remedies for AHS through non-clinical animal studies, suggesting that PγG-enriched FPBs are a potentially valuable ingredient for functional foods, providing an ameliorative effect on AHS. Full article

A novel Bacillus subtilis HB-31 strain was isolated from Gotjawal Wetland in Jeju Island, Republic of Korea. A mucus substance produced by this strain was identified as high-molecular-weight poly-γ-glutamic acid (γ-PGA) using NMR, Fourier transform infrared spectroscopy, and size-exclusion chromatography/multi-angle light scattering analyses. We evaluated whether γ-PGA strengthened the skin barrier using keratinocytes and a reconstructed skin model. In keratinocytes, γ-PGA treatment dose-dependently increased the mRNA expression of skin barrier markers, including filaggrin, involucrin, loricrin, serine palmitoyl transferase, fatty acid synthase, and 3-hydroxy-3-methylglutaryl coenzyme A reductase. γ-PGA also enhanced hyaluronic acid synthesis by upregulating hyaluronic acid synthase-1, -2, and -3 mRNA levels and promoted aquaporin 3 expression, which is involved in skin hydration. In the reconstructed skin model, topical application of 1% γ-PGA elevated filaggrin, involucrin, CD44, and aquaporin 3 expression, compared to the control. These results suggest that the newly isolated HB-31 can be used as a commercial production system of high-molecular-weight γ-PGA, which can serve as an effective ingredient for strengthening the skin barrier and improving moisture retention. Further research is needed to explore the long-term effects of γ-PGA on skin health and its application in treating skin conditions. Full article

Phenolic compounds are harmful organic pollutants found in wastewater from the chemical and pharmaceutical industries, which are frequently accompanied by high saline concentrations. Microorganism-based biodegradation represents an environmentally friendly and cost-effective strategy for phenol removal. In this study, we isolated a bioflocculant-producing Bacillus paralicheniformis BL-1 that is capable of phenol degradation in high-salinity conditions. Differential gene expression analysis revealed the down-regulation of genes related to the synthesis of extracellular polymeric substances and the up-regulation of poly-γ-glutamate biosynthesis in 10% NaCl conditions. These findings indicate that poly-γ-glutamate is the main large biomolecule produced by B. paralicheniformis BL-1. A further investigation suggested that salinity stress resulted in the down-regulated expression of the genes involved in iron homeostasis. Therefore, alleviating iron limitation by supplying excess iron could improve cell growth and, thus, increase the phenol removal rate and flocculating activity. The productivity of poly-γ-glutamate reached 2.23 g/L, and the phenol removal rate reached 73.83% in the synthetic medium supplemented with 10% NaCl, 500 mg/L phenol, and 250 μM FeCl₃. Full article

The presented work discusses the highly efficient esterification of poly (γ-glutamic acid) (γ-PGA) with alkyl halides at room temperature. The esterification reaction was completed within 3 h, and the prepared γ-PGA esters were obtained with excellent yields (98.6%) when 1,1,3,3-tetramethylguanidine (TMG) was used as a promoter. The influence of the amount of TMG, solvent, reaction conditions, and alkyl halides on the esterification reaction was examined. It was found that polar aprotic solvents, such as N-Methylpyrrolidone (NMP) and 1,3-Dimethyl-2-imidazolidinone (DMI), were favorable for the esterification. Non-polar or weakly polar solvents (i.e., dichloroethane, acetonitrile) were not favorable for the esterification. Water as a solvent had a negative effect on esterification. The reactivity of bromine halogenated compounds was higher than that of chlorine halogenated compounds but lower than that of iodine halogenated compounds. The structures of the prepared γ-PGA ester were confirmed by ¹H NMR and FT-IR spectroscopy. Thermal stability and hydrophobic properties of the resulting product were tested. The results showed that the prepared γ-PGA propyl ester had high thermal stability (up to 267 °C) and showed good hydrophobicity (contact angle 118.7°). Full article

The global transition to a sustainable bioeconomy requires the engagement of renewable and cost-effective substrates to obtain valuable bio-based products. Inulin-rich plant materials have promising applications in white biotechnology. This review evaluates the potential of converting inulin through an integrated biorefinery into high-value products by microbial fermentation. It describes the methods for raw biomass and inulin pretreatment, the possibilities of simultaneous saccharification and fermentation (SSF), and the use of wild-type and genetically modified microbial strains. The bioconversion of inulin enables the efficient synthesis of biofuels such as ethanol, butanol, and 2,3-butanediol and biochemicals such as lactic, citric, and poly-γ-glutamic acid. By analyzing the advances in inulin hydrolysis methods, microbial engineering, and bioprocess optimization approaches, this review highlights the broad applicability of inulin in the biorefinery context as a multifunctional, sustainable substrate, which contributes to the development of the circular economy. Full article

Poly-γ-glutamic acid (γ-PGA) is widely used in the field of biomedicine, food, agriculture, and ecological remediation. For the biosynthesis of γ-PGA, the pigments and remaining glutamate are two big problems that impede γ-PGA production by fermentation, and a trade-off between the decolorization rate and γ-PGA recovery rate during the purification process was found. The optimized static activated carbon adsorption conditions for treating the 2-times diluted cell-free supernatant (i.e., feed solution) was as follows: 0.51% 200-mesh, 1000 iodine value, coal-based activated carbon, pH 6.0, 140 min, and 40 °C. Under the optimized conditions, the decolorization rate reached 94.42%, and the recovery rate of γ-PGA was 94.22%. During the adsorption process, the pigments were adsorbed on the activated carbon surface in a monolayer, and the process was a spontaneous, heat-absorbing, and entropy-increasing process. Then, the decolorization flow rate optimized for the dynamic decolorization experiment was 1 BV/h. However, the remaining glutamate was still a problem after the activated carbon adsorption. After isoelectric point (IEP) precipitation of glutamic acid, the glutamic acid can be recovered, and the residual pigment can be further removed. Finally, an integrated decolorization process of activated carbon adsorption and IEP precipitation of glutamic acid was developed. After the integrated process, the decolorization and glutamic acid precipitation rates were 95.80% and 49.02%, respectively. The recovered glutamic acid can be reused in the next fermentation process. Full article

Natural superabsorbent polymers (SAPs) were essential coating materials for developing slow-release fertilizers (SRFs) due to low cost and biodegradability. However, conventional natural SAPs were unsuitable for rice systems due to low stability and short slow-release period. Herein, a natural SAP with a semi-interpenetrating polymer network was prepared by poly (γ-glutamic acid) (PGlu), diatomite, and pullulan polysaccharide and combined with biochar to develop double-layer co-coated slow-release urea for rice systems. The results indicated that diatomite and pullulan modification significantly improved the slow-release capacity of SAP, with a significant increase in the average fertilizer ¹⁵N content of the soil profile by 37.9 ± 7.4% in 14–56 days. The improved slow-release capacity had significant benefits for the sustainability of the rice system, which increased plant N uptake by 17.2 ± 4.8%, decreased fertilizer N losses by 30.4 ± 7.2%, and increased rice grain yield by 9.88 ± 3.6%. More importantly, this natural SAP was fully degradable and its decomposition products are large amounts of small-molecule nutrients that could provide additional C, N, and Si to rice. Therefore, novel co-coated SRF may emerge as a greatly promising candidate for future intensive paddies. Full article

Poly-γ-glutamic acid (γ-PGA) is a natural polymer whose molecular weight and viscosity are critical for its application in various fields. However, research on super-high-molecular-weight or -viscosity γ-PGA is limited. In this study, the pgdS gene in Bacillus licheniformis WX-02 was knocked out using homologous recombination, and the batch fermentation performances of the recombinant strain WX-ΔpgdS were compared to those of WX-02. Nitrate accumulation was observed in the early fermentation stages of WX-ΔpgdS, and gene transcription analysis and cell morphology observations revealed that nitrite accumulation was caused by oxygen limitation due to cell aggregation. When the aeration and agitation rates were increased to 2.5 vvm and 600 r/min, respectively, and citrate was used as a precursor, nitrite accumulation was alleviated in WX-ΔpgdS fermentation broth, while γ-PGA yield and broth viscosity reached 17.3 g/L and 4988 mPa·s. Scanning electron microscopy (SEM) showed that the γ-PGA produced by WX-ΔpgdS exhibited a three-dimensional porous network structure. At a γ-PGA concentration of 5 mg/L, the fermentation broth of WX-ΔpgdS achieved a flocculation efficiency of 95.7% after 30 min of microalgae settling. These findings demonstrate that pgdS knockout results in super-high-viscosity γ-PGA, positioning it as an eco-friendly and cost-effective biocoagulant for microalgae harvesting. Full article

Poly-γ-glutamic acid (γ-PGA) is a carboxylic-acid-rich, bio-derived, water-soluble, edible, hydrating, non-immunogenic polymer produced naturally by several microorganisms. Here, we re-emphasise the ability of Bacillus subtilis natto to naturally produce γ-PGA on whole seaweed, as well as for the yields and chemical properties of the material to be affected by the presence of Mn⁽²⁺⁾. Hyaluronic acid (HA) is an extracellular glycosaminoglycan which presents a high concentration of carboxylic acid and hydroxyl groups, being key in fulfilling numerous applications. Currently, there are strong environmental (solvent use), social (non-vegan extraction), and economic factors pushing for the biosynthesis of this material through prokaryotic microorganisms, which is not yet scalable or sustainable. Our study aimed to investigate an innovative raw material which can combine both superior hygroscopicity and UV protection to the cosmetic industry. Comparable hydration effect of commercially available γ-PGA to conventional moisturising agents (HA and glycerol) was observed; however, greater hydration capacity was observed from seaweed-derived γ-PGA. Herewith, successful incorporation of seaweed-derived γ-PGA (0.2–2 w/v%) was achieved for several model cream systems with absorbances reported at 300 and 400 nm. All γ-PGA-based creams displayed shear thinning behaviour as the viscosity decreased, following increasing shear rates. Although the use of commercial γ-PGA within creams did not suggest a significant effect in rheological behaviour, this was confirmed to be a result of the similar molecular weight. Seaweed-derived γ-PGA cream systems did not display any negative effect on model HaCaT keratinocytes by means of in vitro MTT analysis. Full article