Search Results (279)

To address the limitations of the traditional Coati Optimization Algorithm (COA), such as insufficient global exploration, poor population cooperation, and low convergence efficiency in global optimization and photovoltaic (PV) model parameter identification, this paper proposes a Multi-strategy Enhanced Coati Optimization Algorithm (MECOA). MECOA improves performance through three core strategies: (1) Elite-guided search, which replaces the single global best solution with an elite pool of three top individuals and incorporates the heavy-tailed property of Lévy flights to balance large-step exploration and small-step exploitation; (2) Horizontal crossover, which simulates biological gene recombination to promote information sharing among individuals and enhance cooperative search efficiency; and (3) Precise elimination, which discards 20% of low-fitness individuals in each generation and generates new individuals around the best solution to improve population quality. Experiments on the CEC2017 (30/50/100-dimensional) and CEC2022 (20-dimensional) benchmark suites demonstrate that MECOA achieves superior performance. On CEC2017, MECOA ranks first with an average rank of 1.87, 2.07, 1.83, outperforming the second-best LSHADE (2.03, 2.43 and 2.63) and the original COA (9.93, 9.93 and 9.96). On CEC2022, MECOA also maintains the leading position with an average rank of 1.58, far surpassing COA (8.92). Statistical analysis using the Wilcoxon rank-sum test (significance level 0.05) confirms the superiority of MECOA. Furthermore, MECOA is applied to parameter identification of single-diode (SDM) and double-diode (DDM) PV models. Experiments based on real measurement data show that the SDM model achieves an RMSE of 9.8610 × 10⁻⁴, which is only 1/20 of that of COA. For the DDM model, the fitted curves almost perfectly overlap with the experimental data, with a total integrated absolute error (IAE) of only 0.021555 A. These results fully validate the effectiveness and reliability of MECOA in solving complex engineering optimization problems, providing a robust and efficient solution for accurate modeling and optimization of PV systems. Full article

The rapid growth of distributed photovoltaic (PV) resources is transforming distribution networks into active systems with highly variable net loads, while the rising frequency and severity of extreme weather events is increasing outage risk and restoration challenges. In this context, utilities require reliability assessment tools that jointly represent operational variability and climate-driven stressors beyond stationary assumptions. This paper presents a weather-aware probabilistic framework to quantify the reliability of active distribution networks with high PV penetration. The approach synthesizes realistic residential demand and PV time series at 15-min resolution, models extreme weather as a low-probability/high-impact escalation of component failure rates and restoration uncertainty, and computes IEEE Std 1366–2022 indices (SAIFI, SAIDI, ENS) through Monte Carlo simulation. The methodology is validated on a modified IEEE 33-bus feeder with parameter values representative of urban/suburban overhead networks. Compared with classical reliability modeling, the proposed framework captures in a unified pipeline the joint effects of load/PV stochasticity, weather-dependent failure escalation, and repair-time dispersion, providing a consistent statistical interpretation supported by kernel density estimation and convergence diagnostics. The results show that (i) extreme weather shifts the distributions of SAIFI, SAIDI and ENS to the right and thickens upper tails (higher exceedance probabilities); (ii) PV penetration yields a non-monotonic response with measurable improvements up to intermediate levels and saturation/partial degradation at very high penetrations; and (iii) compound risk is nonlinear, as the mean ENS surface over $(r_{\mathrm{PV}},P_{\mathrm{ext}})$ exhibits a valley at moderate PV and a ridge for large storm probability. A tornado analysis identifies the base failure rate, storm escalation factor and storm exposure as dominant drivers, in line with resilience literature. Overall, the framework provides an auditable, scenario-based tool to co-design DER hosting and resilience investments. Full article

The article analyses the hosting capacity of low-voltage (LV) power grids for connecting distributed energy sources (DER), mainly photovoltaic installations (PV), considering technical limitations imposed by power system operating conditions. The main objective of the research was to develop a simple equation that enables the quick estimation of the maximum power of an energy source that can be safely connected at a given point in the network without causing excessive voltage rise or overloading the transformer and line cable. The analysis was performed on the basis of relevant calculation formulas and simulations carried out in DIgSILENT PowerFactory, where a representative low-voltage grid model was developed. The network model included four transformer power ratings (40, 63, 100, and 160 kVA) and four cable cross-sections (25, 35, 50, and 70 mm²), which made it possible to assess the impact of these parameters on grid hosting capacity as a function of the distance from the transformer station. Based on this, the P_HCI indicator was developed to determine the hosting capacity of a low-voltage network, using only the transformer rating and the length and cross-section of the line for the calculations. A comparison of the results obtained using the proposed equation with detailed calculations showed that the approximation error does not exceed 15%, which confirms the high accuracy and practical applicability of the proposed approach. Full article

Accurate extraction of single-diode photovoltaic (PV) model parameters is essential for reliable performance prediction and diagnostics, yet five-parameter identification from I-V data is ill-posed and computationally expensive. To develop and validate a hybrid analytical–metaheuristic approach that derives the diode ideality factor, saturation current, and photocurrent analytically while optimizing only series and shunt resistances, thereby reducing computational cost without sacrificing accuracy. I-V datasets were collected from a 9.54 kW grid-connected PV installation in Algiers, Algeria (15 operating points; 747–815 W m⁻²; 25.4–28.4 °C). Nine metaheuristics—Stellar Oscillation Optimizer, Enzyme Action Optimization, Grey Wolf Optimizer, Whale Optimization Algorithm, Cuckoo Search, Owl Search Algorithm, Improved War Strategy Optimization, Rüppell’s Fox Optimizer, and Artificial Bee Colony—were benchmarked against full five-parameter optimization and a Newton–Raphson baseline, using root-mean-squared error (RMSE) as the objective and wall-time as the efficiency metric. The hybrid scheme reduced the decision space from five to two parameters and lowered computational cost by ≈60–70% relative to full-parameter optimization while closely reproducing measured I-V/P-V curves. Across datasets, algorithms achieved RMSE ≈ 2.49 × 10⁻² − 2.78 × 10⁻². Rüppell’s Fox Optimizer offered the best overall trade-off (lowest average RMSE and fastest runtime), with Whale Optimization Algorithm a strong alternative (typical runtimes ≈ 107–112 s). Partitioning identification between closed-form physics and light-weight optimization yields robust, accurate, and efficient PV parameter estimation suitable for time-sensitive or embedded applications. Dynamic validation using 1498 real-world measurements across clear-sky and cloudy conditions demonstrates excellent performance: current prediction $R^2=0.9882$, power estimation $R^2=0.9730$, and voltage tracking $R^2=0.9613$. Comprehensive environmental analysis across a 39.2 °C temperature range and diverse irradiance conditions ($0\text{–}1014 \mathrm{W}/{\mathrm{m}}^2$) validates the method’s robustness for practical PV monitoring applications. Full article

The global shift towards renewable energy sources necessitates efficient methods for assessing solar potential in urban areas. Rooftop photovoltaic (PV) systems present a sustainable solution for decentralized energy production; however, their effectiveness is influenced by structural and environmental factors, including roof slope, azimuth, and shading. This study aims to develop and validate a UAV-based methodology for assessing rooftop solar potential in urban areas. The authors propose a low-cost, innovative tool that utilizes a commercial unmanned aerial vehicle (UAV), specifically the DJI Air 3, combined with advanced photogrammetry and 3D modeling techniques to analyze rooftop characteristics relevant to PV installations. The methodology includes UAV-based data collection, image processing to generate high-resolution 3D models, calibration and validation against reference objects, and the estimation of solar potential based on rooftop characteristics and solar irradiance data using the proposed Model Analysis Tool (MAT). MAT is a novel solution introduced and described for the first time in this study, representing an original computational framework for the geometric and energetic analysis of rooftops. The innovative aspect of this study lies in combining consumer-grade UAVs with automated photogrammetry and the MAT, creating a low-cost yet accurate framework for rooftop solar assessment that reduces reliance on high-end surveying methods. By being presented in this study for the first time, MAT expands the methodological toolkit for solar potential evaluation, offering new opportunities for urban energy research and practice. The comparison of PVGIS and MAT shows that MAT consistently predicts higher daily energy yields, ranging from 9 to 12.5% across three datasets. The outcomes of this study contribute to facilitating the broader adoption of solar energy, thereby supporting sustainable energy transitions and climate neutrality goals in the face of increasing urban energy demands. Full article

A novel methodology for hybrid energy management in aquaculture is introduced, aimed at enhancing self-sufficiency and optimizing grid-related cash flows. Wind and solar energy generation are modeled using calibrated turbine performance curves and PVGIS data, respectively, with a photovoltaic capacity of 120 kWp. The system also incorporates a 250 kW small hydroelectric plant and a wood drying kiln that utilizes surplus wind energy. This study conducts a comparative analysis between HY4RES, a research-oriented simulation model, and HOMER Pro, a commercially available optimization tool, across multiple hybrid energy scenarios at two aquaculture sites. For grid-connected configurations at the Primary site (base case, Scenarios 1, 2, and 6), both models demonstrate strong concordance in terms of energy balance and overall performance. In Scenario 1, a peak power demand exceeding 1000 kW is observed in both models, attributed to the biomass kiln load. Scenario 2 reveals a 3.1% improvement in self-sufficiency with the integration of photovoltaic generation, as reported by HY4RES. In the off-grid Scenario 3, HY4RES supplies an additional 96,634 kWh of annual load compared to HOMER Pro. However, HOMER Pro indicates a 3.6% higher electricity deficit, primarily due to battery energy storage system (BESS) losses. Scenario 4 yields comparable generation outputs, with HY4RES enabling 6% more wood-drying capacity through the inclusion of photovoltaic energy. Scenario 5, which features a large-scale BESS, highlights a 4.7% unmet demand in HY4RES, whereas HOMER Pro successfully meets the entire load. In Scenario 6, both models exhibit similar load profiles; however, HY4RES reports a self-sufficiency rate that is 1.3% lower than in Scenario 1. At the Secondary site, financial outcomes are closely aligned. For instance, in the base case, HY4RES projects a cash flow of 54,154 EUR, while HOMER Pro estimates 55,532 EUR. Scenario 1 presents nearly identical financial results, and Scenario 2 underscores HOMER Pro’s superior BESS modeling capabilities during periods of reduced hydroelectric output. In conclusion, HY4RES demonstrates robust performance across all scenarios. When provided with harmonized input parameters, its simulation results are consistent with those of HOMER Pro, thereby validating its reliability for hybrid energy management in aquaculture applications. Full article

The power system’s dynamic frequency stability is affected by common-mode ultra-low-frequency oscillation and differential-mode low-frequency oscillation. Traditional frequency control based on generators is facing the problem of capacity reduction. It is urgent to explore new regulation resources such as photovoltaics. To address this issue, this paper proposes a distributed active support method based on photovoltaic systems via state–disturbance observation and dynamic surface consensus control. A three-layer distributed control framework is constructed to suppress low-frequency oscillations and ultra-low-frequency oscillations. To solve the high-order problem of the regional grid model and to obtain its unmeasurable variables, a regional observer estimating both system states and external disturbances is designed. Furthermore, a distributed dynamic frequency stability control method is proposed for wide-area photovoltaic clusters based on the dynamic surface control theory. In addition, the stability of the proposed distributed active support method has been proven. Moreover, a parameter tuning algorithm is proposed based on improved chaos game theory. Finally, simulation results demonstrate that, even under a 0–2.5 s time-varying communication delay, the proposed method can restrict the frequency deviation and the inter-area frequency difference index to 0.17 Hz and 0.014, respectively. Moreover, under weak communication conditions, the controller can also maintain dynamic frequency stability. Compared with centralized control and decentralized control, the proposed method reduces the frequency deviation by 26.1% and 17.1%, respectively, and shortens the settling time by 76.3% and 42.9%, respectively. The proposed method can effectively maintain dynamic frequency stability using photovoltaics, demonstrating excellent application potential in renewable-rich power systems. Full article

The optimal utilization of UAV-integrated photovoltaic (PV) systems demands accurate modeling that accounts for dynamic flight conditions. This paper introduces a novel computational intelligence-based framework that models the behavior of a moving PV system mounted on a UAV. A unique mathematical approach is developed to translate UAV flight dynamics, specifically roll, pitch, and yaw, into the tilt and azimuth angles of the PV module. To adaptively estimate the diode ideality factor under varying conditions, the Grey Wolf Optimization (GWO) algorithm is employed, outperforming traditional methods like Particle Swarm Optimization (PSO). Using a one-year environmental dataset, multiple machine learning (ML) models are trained to predict maximum power point (MPP) parameters for a commercial PV panel. The best-performing model, Rational Quadratic Gaussian Process Regression (RQGPR), demonstrates high accuracy and low computational cost. Furthermore, the proposed ML-based model is experimentally integrated into an incremental conductance (IC) MPPT technique, forming a hybrid MPPT controller. Hardware and experimental validations confirm the model’s effectiveness in real-time MPP prediction and tracking, highlighting its potential for enhancing UAV endurance and energy efficiency. Full article

This paper presents a performance evaluation of a 140 kW solar array installed on the rooftop of the Mountain Line Transit Authority (MLTA) building in Morgantown, West Virginia (WV), USA, covering the period from 2013 to 2024. The grid-connected photovoltaic (PV) system consists of 572 polycrystalline PV modules, each rated at 245 watts. The study examines key performance parameters, including annual electricity production, average daily and annual capacity utilization hours (CUH), current array efficiency, and performance degradation. Monthly ambient temperature and global tilted irradiance (GTI) data were obtained from the NASA POWER website. During the assessment, observations were made regarding the tilt angles of the panels and corrosion of metal parts. From 2013 to 2024, the total electricity production was 1588 MWh, with an average annual output of 132 MWh. Over this 12-year period, the CO₂ emissions reduction attributed to the solar array is estimated at 1,413,497 kg, or approximately 117,791 kg/year, compared to emissions from coal-fired power plants in WV. The average daily CUH was found to be 2.93 h, while the current PV array efficiency in April 2024 was 10.70%, with a maximum efficiency of 14.30% observed at 2:00 PM. Additionally, an analysis of annual average performance degradation indicated a 2.28% decline from 2013 to 2016, followed by a much lower degradation of 0.17% from 2017 to 2023, as electricity production data were unavailable for most summer months of 2024. Full article

In this research article, a fast and efficient hybrid Maximum Power Point Tracking (MPPT) control technique is proposed for photovoltaic (PV) systems. The method combines two phases—offline and online—to estimate the appropriate duty cycle for operating the converter at the maximum power point (MPP). In the offline phase, temperature and irradiance inputs are used to compute the real-time reference peak power voltage through an Adaptive Neuro-Fuzzy Inference System (ANFIS). This estimated reference is then utilized in the online phase, where the Robust Backstepping Super-Twisting (RBST) controller treats it as a set-point to generate the control signal and continuously adjust the converter’s duty cycle, driving the PV system to operate near the MPP. The proposed RBST control scheme offers a fast transient response, reduced rise and settling times, low tracking error, enhanced voltage stability, and quick adaptation to changing environmental conditions. The technique is tested in MATLAB/Simulink under three different scenarios: continuous variation in meteorological parameters, sudden step changes, and partial shading. To demonstrate the superiority of the RBST method, its performance is compared with classical backstepping and integral backstepping controllers. The results show that the RBST-based MPPT controller achieves the minimum rise time of $0.018$$\mathrm{s}$, the lowest squared error of $0.3015$$\mathrm{V}$, the minimum steady-state error of $0.29$%, and the highest efficiency of $99.16$%. Full article

This study presents a computational investigation into the design of triphenylamine-based donor chromophores incorporating 2-(1,1-dicyanomethylene)rhodanine as the acceptor unit. Three molecular architectures (System-1 to System-3) were developed by introducing distinct thiophene-derived $\pi$-bridges to modulate their electronic and optical characteristics for potential application in bulk heterojunction organic solar cells (OSCs). Geometrical optimizations were performed at the B3LYP/6-31+G(d,p) level, while excited-state and absorption properties were evaluated using TD-DFT with the CAM-B3LYP functional. Frontier orbital analysis revealed efficient charge transfer from donor to acceptor moieties, with System-3 showing the narrowest HOMO–LUMO gap (1.96 eV) and the lowest excitation energy (2.968 eV). Charge transport properties, estimated from reorganization energies, indicated that System-2 exhibited the most favorable balance for ambipolar transport, featuring the lowest electron reorganization energy (0.317 eV) and competitive hole mobility. Photovoltaic parameters calculated with PC₆₁BM as acceptor predicted superior $V_{oc}$, $J_{sc}$, and fill factor values for System-2, resulting in the highest theoretical power conversion efficiency (10.95%). These findings suggest that $\pi$-bridge engineering in triphenylamine-based systems can significantly enhance optoelectronic performance, offering promising donor materials for next-generation OSC devices. Full article

Parameter estimation for solar photovoltaic panels is a popular research topic in green energy. Model parameters can be used for fault diagnosis in solar panels. Artificial neural network (ANN) approaches have been developed to estimate the model parameters of solar panels. In this study, an ANN and Adaptive Particle Swarm Optimization (APSO) approach for model parameter estimation of solar panel is proposed. Load perturbation is injected at the output of the solar PV panel, and the load voltage and current time series are measured. The current and voltage vectors are used as inputs for an ANN, which is used as a classifier for the ranges of the model parameters. The population of the APSO is initialized according to the results of the ANN classifier, and the APSO algorithm is then used to estimate the model parameters of the PV panel. Simulations and experimental studies show that the proposed method has better performance than conventional PSO, and it requires a smaller number of generations to achieve an average parameter estimation error of less than 5%. Full article

Accurate parameter estimation of solar cells is critical for early-stage fault diagnosis in photovoltaic (PV) power systems. A physical model based on three-diode configuration has been recently introduced to improve model accuracy. However, nonlinear and recursive relationships between internal parameters and PV output, along with parameter drift and PV degradation due to long-term operation, pose significant challenges. To address these issues, this study proposes a deep learning-based ensemble framework that integrates outputs from multiple optimization algorithms to improve estimation precision and robustness. The proposed method consists of three stages. First, the collected data were preprocessed using some data processing techniques. Second, a PV power generation system is modeled using the three-diode structure. Third, several optimization algorithms with distinct search behaviors are employed to produce diverse estimations. Finally, a hybrid deep learning model combining convolutional neural networks (CNNs) and long short-term memory (LSTM) networks is used to learn from these results. Experimental validation on a 733 kW PV power generation system demonstrates that the proposed method outperforms individual optimization approaches in terms of prediction accuracy and stability. Full article

It is essential to balance energy supply and demand in residential buildings through accurate forecasting of energy use due to varying daily and seasonal residential building loads. This study demonstrates a data-driven Virtual Energy Replication Framework (VERF) to predict the behavior of residential buildings using weather forecast data. The framework integrates supervised machine learning models and time-ahead weather parameters to estimate photovoltaic (PV) power production, heat pump energy consumption, and indoor thermal comfort. The accuracy of prediction models is validated using TRNSYS simulations of a typical household in Saarbrucken, Germany, a temperate oceanic climate region. The XGBoost model exhibits the highest reliability, achieving a root mean square error (RMSE) of 0.003 kW for PV power generation and 0.025 kW for heat pump energy use, with R² scores of 0.94 and 0.87, respectively. XGBoost and random forest regression models perform well in predicting PV generation and HP electricity load, with mean prediction errors of 5.27–6% and 0–7.7%, respectively. In addition, the thermal comfort index (PPD) is predicted with an RMSE of 1.84 kW and an R² score of 0.80 using the XGBoost model. The mean prediction error remains between 2.4% (XGBoost regression) and −11.5% (lasso regression) throughout the forecasted data. Because the framework requires no real-time instrumentation or detailed energy modelling, it is scalable and adaptable for smart building energy systems, and has particular value for Building-Integrated Photovoltaics (BIPV) demonstration projects on account of its predictive load-matching capabilities. The research findings justify the applicability of VERF for efficient and sustainable energy management using weather-informed prediction models in residential buildings. Full article

The escalating global demand for electricity, coupled with environmental concerns and economic considerations, has driven the exploration of alternative energy sources, creating competition for land with other sectors. A comprehensive analysis of a 10 MW floating photovoltaic (FPV) system deployed across different Köppen climate zones along with techno-economic analysis involves evaluating technical efficiency and economic viability. Technical parameters are assessed using PVsyst simulation and HOMER Pro. While, economic analysis considers return on investment, net present value, internal rate of return, and payback period. Results indicate that temperate and dry zones exhibit significant electricity generation potential from an FPV. The study outlines the payback period with the lowest being 5.7 years, emphasizing the system’s environmental benefits by reducing water loss in the form of evaporation. The system is further integrated with hydrogen generation while estimating the number of cars that can be refueled at each location, with the highest amount of hydrogen production being 292,817 kg/year, refueling more than 100 cars per day. This leads to an LCOH of GBP 2.84/kg for 20 years. Additionally, the comparison across different Koppen climate zones suggests that, even with the high soiling losses, dry climate has substantial potential; producing up to 18,829,587 kWh/year of electricity and 292,817 kg/year of hydrogen. However, factors such as high inflation can reduce the return on investment to as low as 13.8%. The integration of FPV with hydropower plants is suggested for enhanced power generation, reaffirming its potential to contribute to a sustainable energy future while addressing the UN’s SDG7, SDG9, SDG13, and SDG15. Full article