Search Results (119)

Through the energy conversion of building skins, building-integrated photovoltaic (BIPV) technology, the core carrier of the smart city energy system, encourages the conversion of buildings into energy-generating units. However, the decommissioning of the module faces the challenge of physical dismantling and financial environmental damage because of the close coupling with the building itself. As the first tranche of BIPV projects will enter the end of their life cycle, it is urgent to establish a multi-dimensional collaborative recycling mechanism that meets the characteristics of building pv systems. Based on the theory of reverse logistics network, the research focuses on optimizing the reverse logistics network during the decommissioning stage of BIPV modules, and proposes a dual-objective optimization model that considers both cost and carbon emissions for BIPV. Meanwhile, the multi-level recycling network which covers “building points-regional transfer stations-specialized distribution centers” is designed in the research, the Pareto solution set is solved by the improved NSGA-II algorithm, a “1 + 1” du-al-core construction model of distribution center and transfer station is developed, so as to minimize the total cost and life cycle carbon footprint of the logistics network. At the same time, the research also reveals the driving effect of government reward and punishment policies on the collaborative behavior of enterprise recycling, and provides methodological support for the construction of a closed-loop supply chain of “PV-building-environment” symbiosis. The study concludes that in the process of constructing smart city energy system, the systematic control of resource circulation and environmental risks through the optimization of reverse logistics network can provide technical support for the sustainable development of smart city. Full article

Enhancing solar photovoltaic (PV) power generation is fundamental to achieving energy sustainability goals. However, elevated module temperatures can diminish photoelectric conversion efficiency and output power, impacting the safe and efficient operation of PV modules. Therefore, understanding module temperature distribution is crucial for predicting power generation performance and optimizing cleaning schedules in PV power plants. To investigate the combined effects of multiple factors on the temperature distribution and output power of dusty PV modules, a heat transfer model was developed. Validation against experimental data and comparisons with the NOCT model demonstrated the validity and advantages of the proposed model in accurately predicting PV module behavior. This validated model was then employed to simulate and analyze the influence of various parameters on the temperature of dusty modules and to evaluate the module output power, providing insights into sustainable PV energy generation. Results indicate that the attenuation of PV glass transmittance due to dust accumulation constitutes the primary determinant of the lower temperature observed in dusty modules compared to clean modules. This highlights a significant factor impacting long-term performance and resource utilization efficiency. Dusty module temperature exhibits a positive correlation with irradiance and ambient temperature, while displaying a negative correlation with wind speed and dust accumulation. Notably, alignment of wind direction and module orientation enhances module heat dissipation, representing a passive cooling strategy that promotes efficient and sustainable operation. At an ambient temperature of 25 °C and a wind speed of 3 m/s, the dusty module exhibits a temperature reduction of approximately 11.0% compared to the clean module. Furthermore, increasing the irradiance from 200 W/m² to 800 W/m² results in an increase in output power attenuation from 51.4 W to 192.6 W (approximately 30.4% attenuation rate) for a PV module with a dust accumulation of 25 g/m². This underscores the imperative for effective dust mitigation strategies to ensure long-term viability, economic sustainability, and optimized energy yields from solar energy investments. Full article

Renewable energy sources are critical to the global effort to achieve carbon neutrality. Alongside hydropower, wind and nuclear plants, the photovoltaic (PV) systems developed greatly, with new PV technologies emerging in recent years. Although the conversion efficiencies are improving and the materials used have a lower impact on the environment, the feasibility of these technologies is required to be assessed. This paper proposes a levelized cost of energy (LCOE) model to assess the feasibility of five PV technologies: high-efficiency silicon heterojunction cells (HJT), N-type monocrystalline silicon cells (N-type), P-type passivated emitter and rear contact cells (PERC), N-type tunnel oxide passivated contact cells (TOPCon) and bifacial TOPCon. The LCOE considers capital investment, government incentives, operation and maintenance costs, residual value of PV modules and total energy output during the PV system’s life span. To determine the influence of PV system’s capacity over the LCOE values, three systems are analyzed for each technology: 3 kW, 5 kW and 7 kW. The results show that the largest PV systems have the lowest LCOE values, ranging from 2.39 c€/kWh (TOPCon) to 2.92 c€/kWh (HJT) when incentives are accessed, and ranging from 6.05 c€/kWh (TOPCon) to 6.51 c€/kWh (HJT) without subsidies. The 3 kW and 5 kW PV systems have higher LCOE values due to lower energy output during lifetime. Full article

Nonlinear characteristics of solar photovoltaic (PV) and nonuniform surrounding conditions, including partial shading conditions (PSCs), are the major factors responsible for lower conversion efficiency in solar panels. One major condition is the cause of the multiple peaks and oscillation around the peak point leading to power losses. Therefore, this study proposes a novel hybrid framework based on an artificial neural network (ANN) and fractional order PID (FOPID) controller, where new algorithms are employed to train the ANN model and to tune the FOPID controller. The primary aim is to maintain the computed power close to its true peak power while mitigating persistent oscillations in the face of continuously varying surrounding conditions. Firstly, a modified shuffled frog leap algorithm (MSFLA) was employed to train the feed-forward ANN model using real-world solar PV data with the aim of generating a reference solar PV peak voltage. Subsequently, the parameters of the FOPID controller were tuned through the application of the Sanitized Teacher–Learning-Based Optimization (s-TLBO) algorithm, with a specific focus on achieving maximum power point tracking (MPPT). The robustness of the proposed hybrid framework was assessed using two different types (monocrystalline and polycrystalline) of solar panels exposed to varying levels of irradiance. Additionally, the framework’s performance was rigorously tested under cloudy conditions and in the presence of various partial shading scenarios. Furthermore, the adaptability of the proposed framework to different solar panel array configurations was evaluated. This work’s findings reveal that the proposed hybrid framework consistently achieves maximum power point with minimal oscillation, surpassing the performance of recently published works across various critical performance metrics, including the $MP{P}_{efficiency}$, relative error (RE), mean squared error (MSE), and tracking speed. Full article

Waste-to-energy (WTE) is considered the most promising method for municipal solid waste treatment. An integrated energy system (IES) with carbon capture systems (CCS) and power-to-gas (P2G) can reduce carbon emissions. The incorporation of a “green-carbon” offset mechanism further enhances renewable energy consumption. Therefore, this study constructs a WTE-IES hybrid system, which conducts multi-dimensional integration of IES-WTP, CCS-P2G, photovoltaic (PV), wind turbine (WT), multiple energy storage technologies, and the “green-carbon” offset mechanism. It breaks through the limitations of traditional single-technology optimization and achieves the coordinated improvement of energy, environmental, and economic triple benefits. First, waste incineration power generation is coupled into the IES. A mathematical model is then established for the waste incineration and CCS-P2G IES. The CO₂ produced by waste incineration is absorbed and reused. Finally, the “green-carbon” offset mechanism is introduced to convert tradable green certificates (TGCs) into carbon emission rights. This approach ensures energy demand satisfaction while minimizing carbon emissions. Economic incentives are also provided for the carbon capture and conversion processes. A case study of an industrial park is conducted for validation. The industrial park has achieved a reduction in carbon emissions of approximately 72.1% and a reduction in the total cost of approximately 33.5%. The results demonstrate that the proposed method significantly reduces carbon emissions. The energy utilization efficiency and system economic performance are also improved. This study provides theoretical and technical support for the low-carbon development of future IES. Full article

Measuring solar irradiance is key to assessing the conversion efficiency of photovoltaic (PV) modules. Also, PV modules can be used to estimate irradiance through their electrical response to solar radiation using closed-form models (CFMs). This paper presents a prototype design for irradiance estimation based on evaluating three CFMs by implementing a maximum power point tracking (MPPT) system and a surface temperature measurement system. The system employs an incremental conductance (IC)-based control algorithm, which is optimized to eliminate oscillations at the maximum power point (MPP) and ensure efficient MPP tracking. Experimental validation of the implemented circuits is carried out using Arduino Nano, calibrated sensors, and low-cost electronic devices. Tests in real conditions were performed for four days under different irradiance scenarios, using two monocrystalline PV modules: one with 10 years of use and one new one. The accuracy of the CFMs was evaluated using the mean absolute percentage error (MAPE) and root mean squared error indicators, comparing their estimates with measurements from a Davis Instruments pyranometer. The most accurate CFM obtained a MAPE of 4.38% with the 10-year module and 3.26% with the new module. The results show that the proposed methodology provides estimates with an error of less than 5%, which validates its applicability under various climatic conditions, even with old PV modules. Full article

Photovoltaic (PV) wall panels are an integral part of Building-Integrated Photovoltaics (BIPV) and have great potential for development. However, inadequate heat dissipation can reduce power generation efficiency. To reduce the temperature of photovoltaic wall panels and improve the photovoltaic conversion efficiency, this paper constructs a computational fluid dynamics (CFD) numerical model of ventilated photovoltaic wall panels and verifies it, then simulates and analyzes the effects of three cavity structure forms on the thermal performance of photovoltaic wall panels and optimizes the dimensional parameters of the curved-ribbed cavity structure. The average surface temperatures of flat-plate, rectangular-ribbed, and arc-ribbed cavity structure PV wall panels were 59.42 °C, 57.56 °C, and 55.39 °C, respectively, under natural ventilation conditions. Among them, the arc-ribbed cavity structure PV wall panels have the best heat dissipation effect. Further studies have shown that the curvature, rib height, width, and spacing of the curved ribs significantly affect the heat dissipation performance of the photovoltaic panels. Compared to the flat-plate cavity structure, the parameter-optimized curved-rib cavity structure significantly reduces the average surface temperature of PV panels. As solar radiation intensity increases, the optimized structure’s heat dissipation effect strengthens, achieving a 6 °C temperature reduction at 1000 W/m² solar radiation. Full article

Photovoltaic systems are affected by light intensity, temperature, and radiation angle, which influence their efficiency. Accurate estimation of PV module parameters is essential for improving performance. This paper presents an improved optimization technique based on the White Shark Optimizer (WSO) algorithm to optimize key characteristics of the PV module, including current, voltage, series resistance, shunt resistance, and ideality factor. The proposed method incorporates opposition-based learning (OBL) and chaos theory to improve search efficiency. A critical aspect of PV module modeling is inherent symmetry in electrical and thermal characteristics, where balanced parameter estimation ensures uniform energy conversion efficiency. With the application of symmetrical search techniques during the process of optimization, the proposed method enhances convergence robustness and stability, ensuring consistent and precise results across different PV models. Experimental evaluations conducted on three PV models—Single Diode Model (SDM), Double Diode Model (DDM), and general photovoltaic modules—demonstrate that the proposed method outperforms existing metaheuristic techniques such as Jumping Spider Optimization (JSO), Harris Hawks Optimization (HHO), WOA, Gray Wolf Optimizer (GWO), and basic WSO. Key results show improvements in the Friedman rating by 8.1%, 10.79%, and 9.6% for the SDM, DDM, and PV modules, respectively. Additionally, the proposed method achieves superior parameter estimation accuracy, as evidenced by reduced RMSE values compared to the competing algorithms. This work highlights the importance of advanced optimization techniques in maximizing PV output power while maintaining symmetry in parameter estimation. By ensuring a balanced and systematic optimization approach, this study assists in the development of robust and efficient solutions for PV system modeling. Full article

A new and improved sliding mode control (NISMC) with a grey linear regression model (GLRM) facilitates the development of high-quality pure sine wave inverters in photovoltaic (PV) energy conversion systems. SMCs are resistant to variations in internal parameters and external load disturbances, resulting in their popularity in PV power generation. However, SMCs experience a slow convergence time for system states, and they may cause chattering. These limitations can result in subpar transient and steady-state performance of the PV system. Furthermore, partial shading frequently yields a multi-peaked power-voltage curve for solar panels that diminishes power generation. A traditional maximum power point tracking (MPPT) algorithm in such a case misclassifies and fail to locate the global extremes. This paper suggests a GLRM-based NISMC for performing MPPT and generating a high-quality sine wave to overcome the above issues. The NISMC ensures a faster finite system state convergence along with reduced chattering and steady-state errors. The GLRM represents an enhancement of the standard grey model, enabling greater accuracy in predicting global state points. Simulations and experiments validate that the proposed strategy gives better tracking performance of the inverter output voltage during both steady state and transient tests. Under abrupt load changing, the proposed inverter voltage sag is constrained to 10% to 90% of the nominal value and the voltage swell is limited within 10% of the nominal value, complying with the IEEE (Institute of Electrical and Electronics Engineers) 1159-2019 standard. Under rectified loading, the proposed inverter satisfies the IEEE 519-2014 standard to limit the voltage total harmonic distortion (THD) to below 8%. Full article

The dedieselization program is one of the PLN’s (Indonesia’s state-owned utility company) programs to reduce the greenhouse gas effect. The program manifestation is the integration of photovoltaic (PV) systems into isolated island networks by substituting diesel generators. This condition introduces challenges such as diminished system strength, specifically, decreased frequency and voltage stability. This study focuses on Panjang Island, one of the target locations for the PLN’s dedieselization program, which currently relies entirely on diesel generators for electricity. As part of the transition to a PV-based power supply, retired diesel generators are proposed for conversion into synchronous condensers (SCs) to enhance system stability by providing inertia and reactive power support. By employing system modeling, steady-state analysis, and dynamic simulations, this study evaluates the effects of SC penetration on Panjang Island. The findings demonstrate that SCs improve grid stability by offering voltage support, increasing short-circuit capacity, and contributing to system inertia. Furthermore, a system assessment flowchart is also proposed to guide SC deployment based on network characteristics. Short-circuit ratios (SCRs) and voltage drops are evaluated as key parameters to determine the feasibility of SC penetration in a system. Converting retired diesel generators into SCs provides a resilient, stable grid as renewable energy penetration increases, optimizing system performance and reducing network losses. Full article

Energy harvesting technology allows Internet of Things (IoT) devices to be powered continuously without needing battery charging or replacement. In addressing existing and emerging massive IoT energy supply challenges, this paper presents the design of multi-sourced multiple input and multiple output (MIMO) multiband hybrid wireless RF-perovskite photovoltaic energy harvesting subsystems for IoT application. The research findings evaluate the efficiency and power output of different RF configurations (1 to 16 antennas) within MIMO RF subsystems. A Delon quadruple rectifier in the RF energy harvesting system demonstrates a system-level power conversion efficiency of 51%. The research also explores the I-V and P-V characteristics of the adopted perovskite tandem cell. This results in an impressive array capable of producing 6.4 V and generating a maximum power of 650 mW. For the first time, the combined mathematical modelling of the system architecture is presented. The achieved efficiency of the combined system is 90% (for 8 MIMO) and 98% (for 16 MIMO) at 0 dBm input RF power. This novel study holds great promise for next-generation 5G/6G smart IoT passive electronics. Additionally, it establishes the hybrid RF-perovskite energy harvester as a promising, compact, and eco-friendly solution for efficiently powering IoT devices in smart cities. This work contributes to the development of sustainable, scalable, and smart energy solutions for IoT integration into smart city infrastructures. Full article

The rapid rise in the power conversion efficiency (PCE) of perovskite solar cells (PSCs) has opened the door for diverse potential applications in powering indoor Internet of Things (IoT) devices. An energy harvesting system (EHS) powered by a PSC module with a backup Li-ion battery, which stores excess power at moments of high irradiances and delivers the stored power to drive the load during operation scenarios with low irradiances, has been designed. A DC-DC boost converter is engaged to match the voltage of the PSC and Li-ion battery, and maximum power point tracking (MPPT) is achieved by a perturb and observe (P&O) algorithm, which perturbs the photovoltaic (PV) system by adjusting its operating voltage and observing the difference in the output power of the PSC. Furthermore, the charging and discharging rate of the battery storage is controlled by a DC-DC buck–boost bidirectional converter with the incorporation of a proportional–integral (PI) controller. The bidirectional DC-DC converter operates in a dual mode, achieved through the anti-parallel connection of a conventional buck and boost converter. The proposed EHS utilizes DC-DC converters, MPPT algorithms, and PI control schemes. Three different case scenarios are modeled to investigate the system’s behavior under varying irradiances of 200 W/m², 100 W/m², and 50 W/m². For all three cases with different irradiances, MPPT achieves tracking efficiencies of more than 95%. The laboratory-fabricated PSC operated at MPP can produce an output power ranging from 21.37 mW (50 W/m²) to 90.15 mW (200 W/m²). The range of the converter’s output power is between 5.117 mW and 63.78 mW. This power range can sufficiently meet the demands of modern low-energy IoT devices. Moreover, fully charged and fully discharged battery scenarios were simulated to study the performance of the system. Finally, the IoT load profile was simulated to confirm the potential of the proposed energy harvesting system in self-sustainable IoT applications. Upon review of the current literature, there are limited studies demonstrating a combination of EHS with PSCs as an indoor power source for IoT applications, along with a bidirectional DC-DC buck–boost converter to manage battery charging and discharging. The evaluation of the system performance presented in this work provides important guidance for the development and optimization of new-generation PV technologies like PSCs for practical indoor applications. Full article

The comprehensive change from known, classical energy production methods to the increased use of renewable energy requires new methods in the field of efficient application and use of renewable energy. The urban energy supply presents complex challenges in improving efficiency; therefore, the prediction of the dynamical availability of energy is required. Several approaches have been explored, including statistical models and machine learning using historical data and numerical weather prediction models using mathematical models of the atmosphere and weather conditions. Accurately forecasting renewable energy production involves analyzing factors such as related weather conditions, conversion systems, and their locations, which influence both energy availability and yield. This study focuses on the short-term forecasting of wind and photovoltaic (PV) energy using historical data and machine learning approaches, aiming for accurate 8 h predictions. The goal is to develop models capable of producing accurate short-term forecasts of energy production from both resources (solar and wind), suitable for later use in a model predictive control scheme where generation and demand, as well as storage, must be considered together. Methods include regression trees, support vector regression, and regression neural networks. The main idea in this work is to use past and future information in the model. Inputs for the PV model are past PV generation and future solar irradiance, while the wind model uses past wind generation and future wind speed data. The performance of the model is evaluated over the entire year. Two scenarios are tested: one with perfect future predictions of wind speed and solar irradiance, and another considered realistic situation where perfect future prediction is not possible, and uncertain prediction is accounted for by incorporating noise models. The results of the second scenario were further improved using the output filtering method. This study shows the advantages and disadvantages of different methods, as well as the accuracy that can be expected in principle. The results show that the regression neural network has the best performance in predicting PV and wind generation compared to other methods, with an RMSE of 0.1809 for PV and 5.3154 for wind, and a Pearson coefficient of 0.9455 for PV and 0.9632 for wind. Full article

Renewable energy has high volatility in the traditional off-grid AC hydrogen (H₂) production system, which leads to low reliability of the system operation. To address this issue, this paper designs the topology scheme of wind-photovoltaic generation powered off-grid H₂ production system. Firstly, a DC off-grid system topology scheme with the wind turbine (WT) and photovoltaic (PV) is connected to the medium voltage DC bus by two-stage conversion is proposed. The power fluctuation of WT and PV generation systems and the power-adjustable characteristics of electrolyzers are taken into consideration. Meanwhile, the scheme of distributed access of energy storage (ES) to the WT side and PV side to provide the voltage support for the system is proposed. Secondly, the operating characteristics of DC microgrids and AC microgrids under abnormal operating conditions, such as the fault of the source side, the fault of the load side, and communication interruption, are analyzed in this paper. Finally, the electromagnetic transient simulation model of the DC off-grid H₂ production system and the traditional AC off-grid H₂ production system is established. The effectiveness of the proposed topology scheme is verified by simulation of typical operating conditions. Full article

To address the growing electricity demand driven by population growth and economic development while mitigating climate change, West and Central African countries are increasingly prioritizing renewable energy as part of their Nationally Determined Contributions (NDCs). This study evaluates the implications of climate change on renewable energy potential using ten downscaled and bias-adjusted CMIP6 models (CDFt method). Key climate variables—temperature, solar radiation, and wind speed—were analyzed and integrated into the Teal-WCA platform to aid in energy resource planning. Projected temperature increases of 0.5–2.7 °C (2040–2069) and 0.7–5.2 °C (2070–2099) relative to 1985–2014 underscore the need for strategies to manage the rising demand for cooling. Solar radiation reductions (~15 W/m²) may lower photovoltaic (PV) efficiency by 1–8.75%, particularly in high-emission scenarios, requiring a focus on system optimization and diversification. Conversely, wind speeds are expected to increase, especially in coastal regions, enhancing wind power potential by 12–50% across most countries and by 25–100% in coastal nations. These findings highlight the necessity of integrating climate-resilient energy policies that leverage wind energy growth while mitigating challenges posed by reduced solar radiation. By providing a nuanced understanding of the renewable energy potential under changing climatic conditions, this study offers actionable insights for sustainable energy planning in West and Central Africa. Full article