Search Results (502)

The natural sunlight driven photocatalytic degradation of organic pollutants is a sustainable solution for water purification. The use of heterojunction nanocomposites in this process shows promise for improved photodegradation efficiency. In this work, nanocrystalline Zn₂SnO₄/SnO₂ obtained by the solid-state synthesis method was tested as a heterojunction photocatalyst material for the degradation of methylene blue (MB) and Rhodamine B (RhB) dyes as single and multicomponent systems in natural sunlight. Characterization of the structure and morphology of the synthesized nanocomposite using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) combined with energy dispersive X-ray spectroscopy (EDS), and photoluminescence (PL) spectroscopy confirmed the formation of Zn₂SnO₄/SnO₂ and heterojunctions between Zn₂SnO₄ and the SnO₂ nanoparticles. A photodegradation efficiency of 99.1% was achieved in 120 min with 50 mg of the photocatalyst for the degradation of MB and 70.6% for the degradation of RhB under the same conditions. In the multicomponent system, the degradation efficiency of 97.9% for MB and 53.2% for RhB was obtained with only 15 mg of the photocatalyst. The degradation of MB occurred through N-demethylation and the formation of azure intermediates and degradation of RhB occurred through sequential deethylation and fragmentation of the xanthene ring, both in single and multicomponent systems. Full article

In this study, the BPTCD/g-C₃N₄ heterojunction photocatalyst was successfully prepared by the hydrothermal method. BPTCD (3,3′,4,4′-benzophenone tetracarboxylic dianhydride) is immobilised on the surface of g-C₃N₄ by non-covalent π-π stacking. The BPTCD/g-C₃N₄ heterojunction photocatalyst is an all-organic photocatalyst with significantly improved photocatalytic performance compared with g-C₃N₄. BPTCD/g-C₃N₄-60% was able to effectively degrade MO solution (10 mg/L) to 99.9% and 82.8% in 60 min under full spectrum and visible light. The TOC measurement results indicate that MO can ultimately be decomposed into H₂O and CO₂ through photocatalytic action. The photodegradation of methyl orange by BPTCD/g-C₃N₄ composite materials under sunlight is mainly attributed to the successful construction of the heterojunction structure and its excellent π-π stacking effect. Superoxide radicals (^•O₂⁻) were found to be the main active species, while ^•OH and h⁺ played a secondary role. The synthesised BPTCD/g-C₃N₄ also showed excellent stability in the activity of photodegradation of MO in wastewater, with the performance remaining above 90% after three cycles. The mechanism of the photocatalytic removal of MO dyes was also investigated by the trap agent experiments. Additionally, BPTCD/g-C₃N₄-60% demonstrated exceptional photodegradation performance in the degradation of methylene blue (MB). BPTCD/g-C₃N₄ heterojunctions have great potential to degrade organic pollutants in wastewater under solar irradiation conditions. Full article

Polyethersulfone (PES) membranes are essential in separation processes; however, their inherent hydrophobicity can limit their effectiveness in water-intensive applications. This study aims to enhance PES membranes by modifying them with a NiFe₂O₄–nanoclay composite nanoparticle to improve both their hydrophilicity and photocatalytic potential as a photocatalytic membrane. The nanoparticles were synthesized using the sol–gel auto-combustion method and incorporated into PES membranes through mixed-matrix embedding (1 wt% and 3 wt%) and surface coating. X-ray diffraction confirmed the cubic spinel structure of the composite nanoparticles, which followed the second order kinetic reaction during the photodegradation–adsorption of crystal violet. The mixed-matrix membranes displayed a remarkable 170% increase in water flux and a 25% improvement in mechanical strength, accompanied by a slight decrease in contact angle at 1 wt% of nanoparticle loading. In contrast, the surface-coated membranes demonstrated a significant reduction in contact angle to 18°, indicating a highly hydrophilic surface and increased roughness. All membranes achieved high dye removal rates of 98–99%, but only the coated membrane system exhibited approximately 50% photocatalytic degradation, following mixed kinetics. These results highlight the critical importance of surface modification in advancing PES membranes, as it significantly reduces fouling and enhances water–material interaction qualities essential for future filtration and photocatalytic applications. Exploring hybrid strategies that combine both embedding and coating approaches may yield even greater synergies in membrane functionality. Full article

Graphitic carbon nitride (g-C₃N₄) is emerging as one of the most promising non-metallic semiconductors for the degradation of pollutants in water by photocatalytic processes. Its exceptional reduction–oxidation (redox) potentials and adequate band gap of approximately 2.7 eV give it the ability to absorb in the visible light range. However, the characteristic sensitivity to light absorption is limited, leading to rapid recombination of electron–hole pairs. Therefore, different strategies have been explored to optimize this charge separation, among which the formation of heterostructures based on g-C₃N₄ is highlighted. This review addresses recent advances in photocatalysis mediated by g-C₃N₄ heterostructures, considering the synthesis methods enabling the optimization of the morphology and active interface of these materials. Next, the mechanisms of charge transfer are discussed in detail, with special emphasis on type II, type S, and type Z classifications and their influence on the efficiency of photodegradation. Subsequently, the progress in the application of these photocatalysts for the degradation of water pollutants, such as toxic organic dyes, pharmaceutical pollutants, pesticides, and per- and polyfluoroalkyl substances (PFAS), are analyzed, highlighting both experimental advances and remaining challenges. Finally, future perspectives oriented towards the optimization of heterostructures, the efficiency of synthesis methods, and the practical application of these in photocatalytic processes for environmental remediation. Full article

In the present study, a photodegradation technique was employed for the removal of methylene blue dye from aqueous solution using a tungsten oxide-based photocatalyst. The photocatalyst was synthesized via a green synthesis route utilizing a plant extract (PE) under acidic conditions. The synthesized photocatalyst was characterized by various spectroscopic and microscopic techniques that confirmed the presence of various functional groups on the catalyst surface and revealed a narrow bandgap of ~3.0 eV. The synthesized particles exhibited a nanoscale dimension ranging from 10 to 15 nm. The photocatalytic activity of the material was evaluated under ultraviolet light, visible light, and sunlight irradiation, demonstrating the efficient degradation of methylene blue under all light sources. Furthermore, catalysis reusability studies indicated excellent stability, with consistent photocatalytic performance observed after five successive cycles. Full article

Layered double hydroxide Ti-Zn-CO₃ was synthesized by the co-precipitation method with a molar ratio of 2. The synthesized material was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermal analysis (TGA/DTG), UV–vis diffuse reflection spectroscopy (DRS), and Scanning Electron Microscopy (SEM). The photocatalytic degradation of Trypan Blue (TB) and Naphthol Green B (NGB) dyes from aqueous solutions under UV irradiation was investigated. The effects of contact time, photocatalyst dose, dye concentration, solution pH, scavenger effect, and regeneration of catalyst were investigated. The kinetic study showed that the equilibrium was reached within 30 min and 40 min for TB and NGB dyes, respectively, with photodegradation efficiency of around 91% and 83% for TB and NGB dyes, respectively, for dye concentration of 25 mg∙L⁻¹, and the pseudo-first order showed good agreement with the reaction. The optimum photocatalyst dose is 20 mg (1 g∙L⁻¹) and 30 mg (1.5 g∙L⁻¹) for TB and NGB dyes, respectively, and the optimal pH of reaction was found to be 7 for both TB and NGB dyes. This study was established to highlight the photodegradation performance of the prepared catalyst Ti-Zn-CO₃ for the degradation of (TB and NGB) dyes chosen as pollutants, and the fact that it can be used many times, which has an economical effect. This mean that the prepared sample is a potential catalyst with good photocatalytic activity, stability, and reusability. Full article

A composite photocatalyst of ceria–cadmium supported on mesoporous SBA-15 silica was synthesized and employed for the aqueous methylene blue (MB) degradation. The composites were prepared using an incipient wetness impregnation technique and a conventional sol–gel approach with triblock copolymer P123 as a structure-directing agent for SBA-15 preparation, enabling the uniform dispersion of CeO₂ and Cd species within the SBA-15 framework. The physicochemical properties of both CeO₂/SBA-15 and Cd-CeO₂/SBA-15 composites were analyzed using small-angle and wide-angle XRD, FT-IR spectroscopy, SEM, TEM, EDX spectroscopy, N₂ physisorption at 77 K, and UV-Vis spectroscopy. The findings revealed that the SBA-15 support retained its well-ordered hexagonal mesostructure in both the ceria–SBA-15 and SBA-15-supported cadmium–ceria (Cd-CeO₂) composites. The highest degradation efficiency of 96.40% was achieved under optimal conditions, and kinetic analysis using the Langmuir–Hinshelwood model indicated that the MB degradation process followed pseudo-first-order kinetics, with a strong correlation coefficient (R² = 0.9925) and a rate constant (k) of 0.02532 min⁻¹. Under irradiation, the Cd-CeO₂/SBA-15 composites exhibited superior photocatalytic activity compared to the pristine components, owing to the synergistic interaction between ceria and cadmium, enhanced light absorption, and improved charge carrier separation. The recyclability test demonstrated that the degradation efficiency decreased slightly from 96.40% to 94.86% after three cycles, confirming the stability and reusability of Cd-CeO₂/SBA-15 composites. The photocatalytic process demonstrated a favorable electrical energy per order (EE/O) value of 281.8 kWh m⁻³, indicating promising energy efficiency for practical wastewater treatment. These results highlight the excellent photocatalytic performance and durability of the synthesized Cd-CeO₂/SBA-15 composites, making them promising candidates for facilitating the photocatalytic decomposition of MB and other dye molecules in water treatment applications. Full article

Nowadays, there is an urgent need for efficient photocatalysts and adsorbents for environmentally relevant applications. This study investigates the effect of polyaniline (PANI) on the structure and performance of carbonized nanocomposites composed of PANI and TiO₂ nanotubes (NTs), focusing on their photocatalytic degradation efficiency and dye adsorption capacity. The hypothesis was that PANI forms conductive carbon domains and stabilizes the anatase phase during thermal treatment, enhancing the performance of TiO₂-NTs as photocatalysts. Nanocomposites based on PANI and TiO₂-NTs (TTP) were synthesized through chemical oxidative polymerization of aniline (ANI) in the presence of TiO₂-NTs using two TiO₂/ANI molar ratios of 50 and 150 and subsequently carbonized at 650 °C, yielding CTTP-50 and CTTP-150. The novel CTTP composites and carbonized pristine TiO₂-NTs (CTNT) were characterized by various techniques, including TEM, UV-Vis diffuse reflectance, Raman spectroscopy, XRD, and TGA. Their performance regarding dye adsorption and photocatalytic degradation under visible light was evaluated with Acid Orange 7, Methylene Blue, and Rhodamine B. CTTP-150 exhibited the highest adsorption capacity and photodegradation rate, attributed to the synergistic effect of PANI, which stabilizes the TiO₂ phase and enhances visible-light absorption and adsorption. Full article

The growing presence of hazardous organic pollutants in wastewater poses severe environmental and health risks, necessitating sustainable and efficient treatment solutions. Traditional remediation methods have limitations, highlighting the need for innovative approaches. A green synthesis method was developed to produce TiO₂-CeO₂ nanocomposites using Cleistocalyx operculatus leaf extract. The photocatalytic efficiency of the synthesized nanocomposites was evaluated under simulated sunlight by degrading Methylene Blue (MB) dye. Various compositions were tested to determine the optimal performance. The 0.1% TiO₂-CeO₂ nanocomposite achieved the highest degradation efficiency (95.06% in 150 min) with a reaction rate constant (k) of 18.5 × 10⁻² min⁻¹, outperforming commercial TiO₂ (P25, 74.85%, k ≈ 3.7 × 10⁻² min⁻¹). Additionally, the material maintained excellent stability over eight consecutive cycles with only a slight decrease in efficiency from 95.85% to 93.28%. The enhanced photocatalytic activity is attributed to the synergistic effects of CeO₂ incorporation, which enhances charge separation, extends visible light absorption, and promotes reactive oxygen species (ROS) generation. These findings highlight the potential of green-synthesized TiO₂-CeO₂ nanocomposites as a cost-effective and sustainable solution for wastewater treatment. Full article

This work shows a sustainable methodology for the synthesis of biogenic materials designed for the removal and photodegradation of rhodamine B (RhB), a highly dangerous environmental pollutant that induces reproductive toxicity. The classical synthesis of MCM-41-ordered mesoporous materials was modified using biocompatible rice husk as the silica template. Iron was incorporated and the so-prepared biogenic photocatalysts were characterized by X-ray diffraction, N₂ adsorption–desorption isotherms, transmission electron microscopy, diffuse reflectance UV-Vis, surface pH, cyclic voltammetry, and Fourier transform infrared spectral analysis of pyridine adsorption. The photocatalytic performance of the materials was evaluated following the removal by adsorption and the photon-driven degradation of RhB. The adsorption capacity and photocatalytic activity of the biogenic materials were correlated with their properties, including iron content, texture, surface content, and electrochemical properties. The best biogenic material boosted the degradation rates of RhB under UV irradiation up to 4.7 and 2.2 times greater than the direct photolysis and the benchmark semiconductor TiO₂-P25. It can be concluded that the use of rice husks for the synthesis of biogenic Fe-modified mesoporous materials is a promising strategy for wastewater treatment applications, particularly in the removal of highly toxic organic dyes. Full article

In this work, we have reported a simple synthesis method for a hollow porous organic nanosphere-supported ZnO composite photocatalyst (HPON@ZnO) through a combination of a hyper-crosslinking-mediated self-assembly method and a “ship-in-bottle” strategy. The obtained HPON@ZnO possesses a large specific surface area and hierarchically porous structures, which exhibited exceptionally high catalytic activity in the adsorption and degradation of crystal violet, with the reaction proceeding under mild conditions. Additionally, the catalyst demonstrated degradation activity towards other dyes and featured a good stability and recyclability. This simple strategy provides a new approach for the large-scale synthesis of efficient heterogeneous photocatalysts, and offers an effective dye wastewater treatment technique. Full article

Nanoparticles (especially zinc and titanium oxide) have been found to be effective in photodegrading pollutants (organic/inorganic) from industrial wastewater. Presently, this study aimed at biosynthesizing zinc oxide nanoparticles (ZnO-NPs) from the leaf extract of Pavonia zeylanica, a plant with significant medical value, and evaluating their photocatalytic properties against methylene blue (MB), an azo dye (100 mg L⁻¹, pH 7), using solar irradiation, along with the measurement of their reusability and mineralization efficiency. The characterization of the Pz-ZnO-NPs showed an absorbance peak at 313 nm, with a bandgap value of 3.04 eV and a size of 19.58 nm. This study’s results show that the synthesized Pz-ZnO-NPs, upon treatment with MB dye after 2 h of solar irradiation, showed an 89.32% degradation, which was concentration-dependent and followed pseudo-first-order kinetics. The reusability studies indicated that the Pz-ZnO-NPs were able to degrade MB dye after five repeated cycles of its usage. The structural composition of the Pz-ZnO-NPs evaluated by XRD showed that the peak position stayed constant. Nevertheless, the peak intensity dropped, indicating that the ZnO-NPs’ crystal structure was unaffected. Furthermore, advanced oxidation process studies, which included an evaluation of COD and TOC, revealed that both the contents decreased significantly during the photocatalysis process, wherein the electron-rich organic dyes were converted to nontoxic products through mineralization. Full article

TiO₂ mesoporous supports were obtained by the sol–gel method from different precursors (titaniumethoxide, isopropoxide, or butoxide) in the presence of nonionic, cationic, and anionic surfactants. Among these samples, those obtained from Ti isopropoxide, Brij58 w/o activated carbon (AC), were selected as supports. Photocatalysts were obtained by modifying these supports with Ag, Fe, and AgFe (each metal around 1% mass). The characterization results showed a stronger influence of titania precursors, surfactants, and AC on the texture and an insignificant effect on the crystalline structure and morphology of the obtained materials. X-ray photoelectron spectroscopy revealed the effects of AC and Fe on the Ag⁰ concentration and of Ag on Fe-reduced species. Based on this information, the results obtained by H₂-TPR, UV–Vis, Raman, and photoluminescence spectroscopy were explained. The performance of the photocatalysts was evaluated in the degradation of Congo Red (CR) and Crystal Violet (CV) dyes under UV and visible light. The Ag-TiO₂ sample exhibited the best activity in degrading CR at acidic pH and in degrading CV under basic conditions. In visible light, we observed the significant effects of the surface plasmon resonance, AC, Ag, and Fe on the activity in CR photodegradation. The proposed kinetics and mechanisms complete the study of the reactions. Full article

Water pollution by persistent organic and inorganic contaminants constitutes a significant problem for ecosystems and public health. Organic substances such as dyes, pharmaceutical residues, pesticides, and phenolic compounds are increasingly detected in water due to industrial and agricultural activities. Alongside these, toxic heavy metals contribute to the complexity of water treatment challenges. Conventional remediation methods often fall short due to high operational costs or limited efficiency. In this context, photocatalysis has emerged as a promising approach for pollutant degradation in water under light irradiation. In this sense, covalent organic frameworks (COFs), a class of porous, crystalline materials formed by the covalent linkage of organic units, offer great advantages as photocatalysts. Their tunable electronic properties, structural diversity, and high stability under aqueous conditions make them ideal for visible light-driven processes. This review explores the structural features that govern the photocatalytic activity of COFs, including conjugation, bandgap modulation, and donor–acceptor structures. Mechanistic insights into photocatalytic degradation are also discussed. Finally, examples of pre-designed COFs are presented with their application in the photodegradation of water pollutants, and their main reactive oxygen species (ROS) involved in the photodegradation mechanism. Overall, this review aims to provide a foundation for the rational design of COFs in advanced water treatment technologies. Full article

This study explores the efficiency of heterogeneous photocatalysis in wastewater treatment, which is recognized for inducing significant rates of degradation and mineralization of various contaminants, including dyes. The study focuses on the development of an innovative composite via a combination of the sillenite type semiconductor Bi₁₂ZnO₂₀ and the halide-type semiconductor AgI. Both semiconductors were synthesized via co-precipitation, and their phases were identified using X-ray diffraction and characterized by scanning electron microscopy, Raman spectroscopy, Brunauer–Emmett–Teller analysis for specific surface area, UV–Visible diffuse reflectance spectroscopy, and the point of zero charge. The evaluation of the photocatalytic activity of the Bi₁₂ZnO₂₀/AgI heterosystem was carried out by monitoring the degradation process of Basic Blue 41 (BB41) under solar irradiation conditions. The results of this study revealed that the Bi₁₂ZnO₂₀/AgI heterosystem achieved the efficient degradation of BB41, with a removal rate of 98% after 150 min of treatment. The mineralization study showed that the TOC value decreased from 19.89 mg L⁻¹ to 6.87 mg L⁻¹, indicating that a significant portion of BB41 was mineralized. Via kinetic research, it was established that the degradation process followed a pseudo-first-order mechanism. Furthermore, recycling tests showed that the synthesized heterostructures maintained good structural stability and acceptable reusability over several cycles. These findings highlight the potential of heterogeneous photocatalysis as a promising approach to addressing environmental challenges associated with azo dyes. Full article