Search Results (258)

New strawberry cultivars with unusual peel colors, such as white and peach, require thorough characterization to understand their quality traits. In this study, we examined three Japanese cultivars, ‘Kotoka’ (red), ‘Awayuki’ (peach), and ‘Pearl White’ (white), to investigate their differences in chemistry and optical properties. We measured the sugar content, acidity, and maturity index, and combined these with fluorescence spectroscopy and imaging under three LED lights (365 nm, 420 nm, and white). The fluorescence data showed clear differences between cultivars, in which the ‘Pearl White’ gave a strong near-UV peak around 290/325 nm, ‘Awayuki’ had a high far-red signal in 490/745 nm, and ‘Kotoka’ showed lower fluorescence overall. Imaging backed up these findings, with ‘Pearl White’ and ‘Awayuki’ looking brighter under UV while Kotoka appeared darker and more uniform. Texture analysis showed ‘Pearl White’ had a more uneven surface, while ‘Kotoka’ was smoother. The basic chemistry also matched these trends, as ‘Kotoka’ had the most sugar and acid, giving it a sharper taste, while ‘Pearl White’ had the highest maturity index and a milder flavor. These results demonstrate how fluorescence fingerprints and imaging features, when combined, can rapidly characterize strawberry types and assess their quality without damaging the fruit. Full article

Yangjiatang Village traces its origins to the late Ming and early Qing dynasties. It has evolved over more than 400 years of history. There are 78 rammed-earth buildings left, making it one of the most complete and largest rammed-earth building complexes in East China. This study investigated the traditional rammed-earth houses in Yangjiatang Village, Songyang County, Zhejiang Province. By combining field investigation, microscopic characterization, and experimental simulation, we systematically revealed the erosion resistance of rammed earth in a subtropical humid climate was systematically revealed. Using a combination of advanced techniques including drone aerial photography, X-ray diffraction (XRD), microbial community analysis, scanning electron microscopy (SEM), and soil leaching simulations, we systematically revealed the anti-erosion mechanisms of rammed-earth surfaces in Yangjiatang Village. The study found that (1) rammed-earth walls are primarily composed of Quartz, Mullite, lepidocrocite, and Nontronite, with quartz and lepidocrocite being the dominant minerals across all orientations. (2) Regulating the community structure of specific functional microorganisms enhanced the erosion resistance of rammed-earth buildings. (3) The surface degradation of rammed-earth walls is mainly caused by four factors: structural cracks, surface erosion, biological erosion and roof damage. These factors work together to cause surface cracking and peeling (depth up to 3–5 cm). (4) This study indicates that the microbial communities in rammed-earth building walls show significant differences in various orientations. Microorganisms play a dual role in the preservation and deterioration of rammed-earth buildings: they can slow down weathering by forming protective biofilms or accelerating erosion through acid production. Full article

Sunset yellow (SY) is a synthetic azo dye widely used in food and cosmetics. However, concerns have been raised about its potential health risks, including its nephrotoxicity and genotoxicity, when used in excessive amounts. Illegal addition of SY may cause allergic reactions or genetic damage. Therefore, a rapid method for detecting SY is needed. To develop a rapid detection method for sunset yellow (SY) with the aim of preventing its illegal addition in food, this study utilized agricultural waste asparagus peel (AP) as a carbon source and synthesized amino-functionalized carbon quantum dots (AP-CDs) via a green hydrothermal method. A highly sensitive detection platform was established based on the fluorescence quenching mechanism of AP-CDs in the presence of SY. The microstructure of AP-CDs was characterized using transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). Their optical properties were assessed via ultraviolet–visible absorption spectroscopy (UV-vis) and fluorescence spectroscopy (FS). Furthermore, key experimental parameters affecting SY detection were systematically optimized. Results revealed that the synthesized AP-CDs possessed surface hydrophilic functional groups, including hydroxyl, amide, and carboxyl groups, and were composed of carbon (C), oxygen (O), and nitrogen (N) elements. Optical performance studies demonstrated that AP-CDs exhibited a strong fluorescence emission at 470 nm under 380 nm excitation, with a quantum yield (Φ) of 15.9%. Under the optimized conditions (pH 7.0, 0.5 mg/mL AP-CDs), the fluorescence intensity showed a linear response to the concentration of SY over the range of 0.1 to 100 μM (R² = 0.9929), achieving a detection limit of 0.92 μM. This strategy not only enables sustainable resource utilization but also provides a sensitive and practical approach for food safety monitoring, demonstrating significant potential for real-world applications. Full article

Mercury (Hg) exposure is a major environmental risk factor, closely linked to oxidative stress and cardiovascular disease. Red blood cells (RBC), due to their high oxygen exposure and lack of repair mechanisms, are particularly sensitive to oxidative injury and are key indicators of systemic redox imbalance. This study evaluates the protective effects of polyphenolic extracts from Annurca apple, specifically flesh and peel, from both ripe and unripe fruit, on HgCl₂-exposed human RBCs. Key oxidative stress markers were measured, including ROS production, GSH levels, lipid peroxidation (TBARS), MetHb formation, SH group content, microvesicle (MV) generation, and morphological changes. Peel extracts, particularly those from ripe apples, consistently exhibited stronger antioxidant and cytoprotective effects than flesh extracts, effectively reversing Hg-induced oxidative damage and preserving RBC integrity. Notably, these extracts restored redox homeostasis and GSH levels, reduced ROS and TBARS accumulation, prevented MetHb formation, and mitigated MV release and morphological alterations. These protective effects appear to involve multifactorial mechanisms. These findings highlight the nutraceutical potential of Annurca apple extracts in counteracting heavy metal-induced oxidative stress and support their possible relevance for future studies aimed at health protection and waste valorization. Full article

The gut microbiota plays a significant role in metabolic diseases such as obesity. We extracted and purified a new type of pectin polysaccharide (mango peel pectin, MPP) from mango (Mangifera indica L.) peel. The structural analysis results reveal that MPP has a molecular weight (Mw) of 6.76 × 10⁵ Da and the mass fractions of the main components were galacturonic acid (21.36%), glucose (8.85%), and arabinose (5.97%). The results of methylation and NMR analyses reveal that the backbone of MPP consisted of →6)-α-D-GalpAOMe-(1→ and →4)-β-D-Glcp-(1→ linkages. Based on the above structural analysis, we further explored the therapeutic effect of MPP on high-fat diet-induced obese mice. The results demonstrate that MPP significantly suppressed body weight and dyslipidemia, reduced liver damage and lipid accumulation, attenuated changes in adipocyte hypertrophy, and improved glucose homeostasis and insulin resistance, with fasting blood glucose (FBG) levels decreasing by more than 12.8%. Furthermore, the modulatory impact of MPP on gut microbiota composition was investigated. MPP treatment significantly enhanced the levels of short-chain fatty acids (SCFAs) by decreasing the amount of Bacillota and reducing the Bacillota/Bacteroidota ratio, especially with an increase in the total SCFA content of over 64%. Meanwhile, MPP treatment encouraged beneficial bacteria to grow (e.g., Bacteroidota, Akkermansia, and Nanasyncoccus), altered the gut microbiome profiles in mice, and decreased the abundance of harmful bacteria (e.g., Paralachnospira, Coproplasma, Pseudoflavonifractor, Parabacteroides, Acetatifactor, and Phocaeicola). Overall, the findings demonstrate for the first time that MPP treats obesity by alleviating dyslipidemia, improving insulin resistance, and regulating gut microbiota to improve the intestinal environment. Full article

Growing evidence suggests that Reelin signals and cleavages are affected in neurodegenerative diseases, prospecting a potential role for Reelin in the pathogenesis of neurodegenerative processes occurring in insulted retinas. We sought to determine whether Reelin, Aβ1-42, FTH1 and TAU proteins accumulate in ocular fluids of idiopathic epiretinal membrane (iERM) specimens and whether such accumulations depend on disease severity. Comparisons and correlation studies were used to verify the hypothesis of a Reelin, Aβ1-42, TAU and FTH1 marker expressions in this vitreoretinal disease, extending the knowledge on the pathological spectrum of neurodegenerative eye diseases. Aqueous, vitreous and peeled-off ERM samples were collected from patients who had undergone vitrectomy and grouped according to disease severity. We found out that Reelin and Aβ1-42 were expressed in ocular fluids and affected ERMs depending on disease severity. At stage 3, higher Reelin and Aβ1-42 immunofluorescence staining was detected in ERMs, in agreement with the higher Reelin, Aβ1-42, FTH1 and TAU transcript expressions by RT-PCR. Differential expressions of transcripts specific to Aβ1-42, FTH1, GFAP and TAU occurred in vitreal hyalocytes and astrocytes, which selectively responded to vitreal exposure. This is the first study reporting the association between Reelin and ERM disease, highlighting the potential role of Reelin in neurodegenerating and Drusen-affected retinas. The potential association of neurodegenerative mediators with ERM would suggest that part of the neuronal damage activated at the vitreoretinal interphase might be driven by Reelin. Full article

Periodic visual inspections are currently conducted to maintain the condition of railway bridges. These inspections rely on direct visual assessments by human inspectors, often requiring specialized equipment such as aerial ladders. However, this method is not only time-consuming and costly but also involves significant safety risks. Therefore, there is a growing need for a more efficient and reliable alternative to traditional visual inspections of railway bridges. In this study, we evaluated and compared the performance of damage detection using U-Net-based deep learning models on images captured by unmanned aerial vehicles (UAVs). The target damage types include cracks, concrete spalling and delamination, water leakage, exposed reinforcement, and paint peeling. To enable multi-class segmentation, the U-Net model was trained using three different loss functions: Cross-Entropy Loss, Focal Loss, and Intersection over Union (IoU) Loss. We compared these methods to determine their ability to distinguish actual structural damage from environmental factors and surface contamination, particularly under real-world site conditions. The results showed that the U-Net model trained with IoU Loss outperformed the others in terms of detection accuracy. When applied to field inspection scenarios, this approach demonstrates strong potential for objective and precise damage detection. Furthermore, the use of UAVs in the inspection process is expected to significantly reduce both time and cost in railway infrastructure maintenance. Future research will focus on extending the detection capabilities to additional damage types such as efflorescence and corrosion, aiming to ultimately replace manual visual inspections of railway bridge surfaces with deep-learning-based methods. Full article

In engineering practice, liquid droplet impingement typically occurs at an oblique angle relative to the target surface, yet the influence of impact orientation on damage outcomes remains contentious and exhibits target-material dependency. In this paper, a typical single-waterjet-generating technique is applied to liquid impact tests on a unidirectional carbon fiber-reinforced polymer (CFRP) laminate, with special focus on the effects of the impingement angle and the fiber orientation. Finite-element simulation is employed to help reveal the failure mechanism of oblique impacts. The results show that, in most cases, the damage caused by a 15° oblique impact is slightly larger than that of a normal impact, while the increase amplitude varies with different impact speeds. Resin removal is more prone to occur when the projection of the waterjet velocity on the impact surface is perpendicular (marked as the fiber orientation PE) rather than parallel (marked as the fiber orientation PA) to the fiber direction of the top layer. A PE fiber orientation can lead to mass material peeling in comparison with PA, and the damage range is even much larger than for a normal impact. The underlying mechanism can be attributed to the increased lateral jet-particle velocity and resultant shear stress along the impact projection direction. The distinct damage modes observed on the CFRP laminate with the different fiber orientations PE and PA originate from the asymmetric tensile properties in the longitudinal/transverse directions of laminates coupled with dissimilar fiber–matrix interfacial characteristics. A theoretical model for the surface damage area under a single-jet impact was established through experimental data fitting based on a modified water-hammer pressure contact-radius formulation. The model quantitatively characterizes the influence of critical parameters, including the jet velocity, diameter, and impact angle, on the central area of the surface failure ring. Full article

Tomatoes are among the most widely consumed and economically significant fruits in the world. However, the extensive use of pesticides in their cultivation has led to the contamination of the peels, posing potential health risks to consumers. As one of the top global producers, consumers, and exporters of tomatoes, Mexico requires rapid, non-destructive, and real-time methods for pesticide monitoring. In this study, a detailed characterization of six pesticides using Raman and Fourier Transform Infrared (FT-IR) spectroscopies was carried out to identify their characteristic vibrational modes. The pesticides examined included different chemical classes commonly used in tomato cultivation: organophosphorus (dichlorvos and methamidophos), pyrethroids (lambda-cyhalothrin and cypermethrin), and carbamates (methomyl and benomyl). Tomato peel samples were examined both before and after pesticide application. Prior to treatment, the peel exhibited a well-organized polygonal structure and showed the presence of carotenoid compounds. After pesticide application, no visible structural damage was observed; however, distinct vibrational bands enabled the detection of each pesticide. Organophosphorus pesticides could be identified through vibrational bands associated with P-O and C-S bonds. Pyrethroid detection was facilitated by benzene ring breathing modes and C=C stretching vibrations, while carbamates were identified through C-N stretching contributions. Phytotoxicity testing in the presence of pesticides indicates no significant damage during the germination of tomatoes. Full article

Background: Contemporary agriculture heavily relies on synthetic chemicals to ensure high yields and food security; however, their overuse has led to health issues and the development of pesticide resistance in pests. Researchers are now exploring natural, eco-friendly alternatives for pest control. Methods: This study evaluated two ethanol-based formulations (1.25% and 2.50%, v/v) derived from the tangerine peel (Citrus reticulata L. var. Clementina) against conventional chemical treatments and an untreated control group in the cultivation of potatoes (Solanum tuberosum L. var. Capiro). A randomised block design was used, with three blocks per treatment containing 45 plants. The experiment was conducted during the wet season (February–April 2023). Results: According to visual inspections and yellow traps, following weekly application from days 30 to 105 post-planting to monitor pest (e.g., Frankliniella occidentalis, Aphididae) and beneficial insect (e.g., Coccinellidae, Apis mellifera) populations, the 2.50% formulation performed similarly to chemical treatments against pests, whilst being harmless to beneficial insects. Post-harvest analysis showed that the formulations achieved 73% of conventional yields, with comparable tuber damage and levels of Premnotrypes vorax larvae. Conclusions: Toxicological tests confirmed the eco-friendliness of the formulations, making them suitable for small-scale Andean ‘chakras’ in organic farming and honey production, without the use of chemicals. Full article

To investigate the degradation mechanisms of the surrounding rock in abandoned mine roadways used for oil storage, this study combined uniaxial compression tests with digital image correlation (DIC), scanning electron microscopy (SEM), and other techniques to analyze the evolution of the rock mechanical properties under the coupled effects of oil–water soaking and initial damage. The results indicate that oil–water soaking induces the loss of silicon elements and the deterioration of microstructure, leading to surface peeling, crack propagation, and increased porosity of the sample. The compressive strength decreases linearly with the soaking time. Acoustic emission (AE) monitoring showed that after 24 h of soaking, the maximum ringing count rate and cumulative count decreased by 81.7% and 80.4%, respectively, compared to the dry state. As the liquid saturation increases, the failure mode transitions from tension dominated to shear failure. The synergistic effect of initial damage and oil–water erosion weakens the rock’s energy storage capacity, with the energy storage limit decreasing by 45.6%, leading to reduced resistance to external forces. Full article

The stability of bottom structures in block caving mines is significantly challenged by impact loads generated from large rockfalls and ore collapses on slopes. This study aims to investigate the mechanical response and failure characteristics of bottom structures under such dynamic and cyclic loading conditions. Discrete element methods (DEMs) were employed to simulate the impact load amplitudes caused by large rockfalls on bottom structures. Specimens with identical mechanical properties to the bottom structure were fabricated at a 1:100 scale, based on the principle of similarity ratio tests. Three distinct types of impact loads were identified and analyzed: overall impact from large-scale slope collapses, localized impact from partial rock and soil mass collapses, and continuous multiple impacts from progressive slope failures. True triaxial tests were conducted to evaluate the mechanical response of the bottom structure under these loading scenarios. The results indicate that while overall and multiple impact loads from slope collapses do not lead to catastrophic failure of the bottom structure, severe damage occurs under a 100 m thickness of ore and large block impacts. Specifically, the inner walls of ore accumulation troughs peel off, and ore pillars between troughs fracture and fail. This study highlights the need for advanced experimental and numerical approaches to accurately predict the stability and failure modes of bottom structures under complex loading conditions. Full article

Botrytis cinerea is one of the phytopathogenic fungi of the greatest economic importance worldwide. Essential oils (EOs) have been proposed as a sustainable alternative to reduce the growth of phytopathogenic fungi. Nevertheless, few studies exist about its mechanisms of action. This study evaluated the antifungal activity of EOs from Citrus reticulata, Citrus limon, Citrus sinensis, and Citrus paradisi peels and their encapsulation inside solid lipid nanoparticles (SLNs). Accordingly, Citrus EOs were mainly constituted by monoterpene hydrocarbons, where limonene was the most abundant in all EOs. C. reticulata and C. limon EOs reduced the mycelial growth at above 54% after 96 h. The other EOs did not significantly impact the phytopathogen. C. reticulata EO increased the hyphae damage by 40%, but the spore germination was reduced by only 8.34%. It also significantly increased the pH, the electrical conductivity, and the release of intracellular absorbing material and soluble proteins in B. cinerea cultures. Contrary, the esterase, mitochondrial, and succinate dehydrogenase activities decreased at above 50%. C. reticulata EO into SLN reduced the mycelial growth of B. cinerea by 90–97%. These results show that the EO of C. reticulata alters the physiological and metabolic activities of B. cinerea to reduce its growth. Full article

Geraniin is the major compound in Nephelium lappaceum peel and exhibits significant immunomodulatory effects. So, this study aimed to evaluate the anti-inflammatory effects of Nephelium lappaceum peel extract and geraniin through in vitro experiments and clinical trials. In vitro, inflammatory responses were induced using UV, IR, SDS, LPS, and RA, followed by treatment with the Nephelium lappaceum peel extract and geraniin. The results demonstrated significant reductions in inflammatory cytokines, indicating potent anti-inflammatory properties. Based on these promising results, clinical trials were conducted to assess the effects of the Nephelium lappaceum peel extract on skin barrier function using various irritants, including IR, UV, SDS, Retinol, and tape stripping. Measurements of transepidermal water loss and erythema were performed to evaluate the extract’s protective effects. The results indicated that Nephelium lappaceum peel extract effectively mitigated skin barrier damage and reduced erythema, confirming its potential as a skin-soothing and anti-inflammatory agent. This study suggests that Nephelium lappaceum peel extract, rich in bioactive compounds such as geraniin, can be utilized in the development of cosmetic products aimed at reducing skin inflammation and protecting against environmental irritants. Full article

Apple scab is a disease caused by Venturia inaequalis; it alters the vegetative cycle of apple trees and affects the fruits in orchards or during post-harvest storage. Utilizing rotten apples in cidermaking is a promising technique to mitigate crop losses; nonetheless, uncertainties persist regarding the beneficial effects of damaged fruits. This study involves a thorough chemical analysis of cider produced from both healthy and scab-infected fruits to identify compositional changes caused by microbial proliferation and to assess their impact on cider quality. Apples infected by post-harvest apple scab, as opposed to uninfected apples, were employed in cidermaking. The peel microbiota was described by plate count, and next-generation sequencing-based metabarcoding methods were used to describe the peel microbiota, while HPLC and GC MS-MS were used to characterize the cider compositions. Apples infected with post-harvest scab host a specific fungal consortium with higher biodiversity, as evidenced by the Shannon evenness index, especially in the fungi kingdom. The presence of apple scab slows fermentation by up to 23%, lowers ethanol accumulation by up to 0.4%, and affects certain cider constituents: sugars, alcohols, amino acids, fatty acids, and esters. The statistical treatment of data relative to the chemical profile (PLS and PCA on the 31 compounds with VIP > 1) distinguishes ciders made from altered or safe fruits. Scab-infected apples can be valorized in the agri-food industry; however, microbiota alterations must not be underestimated. It is necessary to implement adequate mitigation strategies. Full article