Search Results (96)

Background and Objectives: Orbital floor fractures are challenging to treat, due to the complex orbital anatomy and limited surgical access. Emerging technologies—such as virtual surgical planning (VSP), 3D printing, patient-specific implants (PSIs), and intraoperative navigation—offer promising advancements to improve the surgical precision and clinical outcomes. This review systematically evaluates and synthesizes current technological modalities with respect to their accuracy, operative duration, cost-effectiveness, and postoperative functional outcomes. Materials and Methods: A systematic review was conducted according to the PRISMA 2020 guidelines. The PubMed, Scopus, and PRIMO databases were searched for clinical studies published between 2019 and September 2024. Out of 229 articles identified, 9 met the inclusion criteria and were analyzed using the PICO framework. Results: VSP and 3D printing enhanced diagnostics and presurgical planning, offering improved accuracy and reduced planning time. Pre-bent PSIs shaped on 3D models showed superior accuracy, lower operative times, and better cost efficiency compared to intraoperative mesh shaping. Custom-designed PSIs offered high precision and clinical benefit but required a longer production time. Intraoperative navigation improved implant positioning and reduced the complication rates, though a detailed cost analysis remains limited. Conclusions: VSP, 3D printing, and intraoperative navigation significantly improve surgical planning and outcomes in orbital floor reconstruction. Pre-bent PSIs provide a time- and cost-effective solution with strong clinical performance. While customized PSIs offer accuracy, they are less practical in time-sensitive settings. Navigation systems are promising tools that enhance outcomes and may serve as an alternative to custom implants when time or resources are limited. Full article

Background/Objectives: Orbital fractures are common facial injuries that require precise reconstruction to restore both function and esthetics. Heterologous cortical lamina and titanium preformed meshes are widely used for orbital wall reconstruction; however, comparative data on their outcomes remain limited. Methods: This retrospective observational study analyzed 67 patients treated for orbital fractures at Santa Maria Hospital, Terni, between January 2021 and November 2024. Patients underwent orbital reconstruction using either a heterologous cortical lamina or titanium mesh. Clinical data, including demographics, trauma etiology, fracture characteristics, surgical approach, and postoperative complications were collected. Outcomes such as diplopia, enophthalmos, ocular motility, and sensory impairment were assessed preoperatively and postoperatively and compared between groups. Statistical analyses included Chi-square and Mann–Whitney U tests, with logistic regression to identify risk factors for complications. Results: Accidental falls were the leading cause of injury (46.3%), with the orbital floor being the most commonly affected site (83.6%). Postoperative complications occurred in 15% of patients, with diplopia significantly reduced from 47.8% preoperatively to 10.4% postoperatively (p < 0.05). Sensory impairment and motility restrictions also improved significantly. Patients reconstructed using heterologous cortical lamina experienced significantly fewer postoperative complications compared to those treated with titanium mesh (OR = 0.171, 95% CI: 0.023–0.799, p = 0.040). Conclusions: Both heterologous cortical lamina and titanium mesh provide effective orbital reconstruction; however, the heterologous cortical lamina was associated with fewer postoperative complications, particularly diplopia and sensory impairment. Material selection should consider the fracture complexity, patient characteristics, and potential long-term outcomes. Full article

Background: Orbital floor blowout fractures (OFBF) can have serious consequences for the patient. Selecting the right treatment method and materials is essential. Krenkel’s maxillary sinus implant has been used successfully for more than 40 years in clinical practice. The aim of this study was to evaluate the long-term outcome of this implant compared to polydioxanone (PDS) sheets. Material and methods: This retrospective study examined a cohort of 82 OFBF patients over a seven-year period. Clinical and geometric data were collected. Defect size, location, and the volume of the herniated tissue were measured from conventional computer tomography (CT) or cone beam computer tomography (CBCT) scans. The relationship between ophthalmologic rehabilitation and treatment modality was analyzed using logistic regression. Results: The study included 82 patients, 28% female and 72% male, with a median age of 45.2 years. Defect size and hernia volume correlated with preoperative ophthalmological symptoms. At follow-up, 14.8% in the implant group and 28.6% in the PDS group showed mild visual impairment, with no severe diplopia. Conclusions: Our results suggest this method is a reliable and effective solution for repairing OFBFs and ophthalmologic rehabilitation. However, further research in a clinical controlled trial is needed. Full article

Background/Objectives: Orbital fractures are a very serious problem due to the close location of the eyeball and a direct path to brain injuries, which is associated with serious consequences. This study aims to assess the usefulness of the Orbital Destruction Intensity (ODI) scale. Additionally, this article includes elements of an epidemiological study. Methods: A retrospective study of 160 patients admitted to the Department of Maxillofacial Surgery in Łódź (Poland) between January 2021 and June 2024 was conducted. In this study, general patient information (gender, age), details about the injuries (cause, affected orbit, accompanying symptoms), diagnosis (ODI scale, pathological classification), and treatment were assessed. Analysis of the distribution of features and regression analysis was performed in the case of quantitative data. To compare the assessment of the impact of a categorical variable on a quantitative variable, the Kruskal–Wallis test was used. A p-value of less than 0.05 was considered statistically significant. Results: The main cause of the accident was assault, which accounted for 39% of cases. An X-ray examination showed that patients had an average ODI score of 2.92 ± 1.69. Patients with low ODI scores mostly had isolated fractures of the orbital floor. As ODI scores increased, zygomaticomaxillary complex (ZMCO) fractures became more common as an additional fracture (p < 0.05). For patients with low ODI scores, treatment generally involves reconstructing the orbital wall with titanium mesh. For those with higher ODI scores, treatment may include microplate osteosynthesis or a combination of both methods (p < 0.05). Conclusions: A correlation was observed between the diagnosis based on ODI, anatomical classification, and the treatment provided. This relationship is related to the nature of the ODI scale, as, when the severity of the injury increases, additional anatomical structures (walls or rims of the orbit) are included. Full article

Study Design: Retrospective with follow-up. Objective: To evaluate the long-term satisfaction of surgically treated patients with zygomaticomaxillary complex (ZMC) fractures in relation to the use of internal fixation, number of fixation points, and orbital floor (OF) reconstruction. Secondary objectives were to describe the use of antibiotics and post-operative infections. Methods: Patients with unilateral ZMC fractures between 2007–2018 and treatment with either open reduction and internal fixation (ORIF) or closed reduction (CR) were identified from medical records and invited to follow-ups between 2018–2020. Patients were examined, photographed, and completed a questionnaire. A review panel of 3 experienced surgeons evaluated photographs and computed tomography (CT) scans pre- and post-surgery. Results: The study sample consisted of 136 patients (108 ORIF, 28 CR) with a median follow-up time of 76 months. Patient satisfaction of surgical outcome was high (97.8%), with no significant differences in relation to the use of internal fixation, number of fixation points, or OF reconstruction. Dissatisfaction was primarily related to hypoesthesia. On post-operative CT scans, malar asymmetry was more often predicted in patients with 1-point fixations. On questionnaires and photographs, malar asymmetry was more common in patients with 3-point fixations. Prophylactic antibiotics had no effect on the rate of post-operative infections. Conclusions: Patient satisfaction was not influenced by internal fixation, number of fixation points, or OF reconstruction. Selected ZMC fractures can be treated with less invasive approaches. Caution should be observed when predicting long-term malar asymmetry on post-operative CT scans. The findings of this study highlight the importance of a rational and ethical use of surgery. Full article

Background/Objectives: This study aims to compare the clinical findings, particularly symptomatic diplopia, associated with an inferomedial orbital strut fracture versus intact strut and to determine the clinical significance of the inferomedial orbital strut in patients with orbital floor and medial orbital wall fractures. Methods: A 10-year retrospective observational study involving orbital blowout fracture cases was conducted in our institution. Patients with fractures of the orbital floor medial to the infraorbital groove and medial orbital wall, as seen on computed tomography (CT) scans, were included in this study. Patients with concomitant orbital rim fracture and those with old orbital fractures were excluded. Fracture of the inferomedial orbital strut was diagnosed via coronal CT images and patients were classified into those with an inferomedial orbital strut fracture and those without. Results: A total of 231 orbits from 230 patients was included in the study (fractured strut on 78 sides and intact strut on 153 sides). Approximately 2/3 of patients in both groups had the field of binocular single vision in primary position upon first examination (p = 0.717). Patients with strut fractures demonstrated only comminuted or open fractures, while those without strut fractures showed diverse fracture patterns (p < 0.001). Conclusions: Inferomedial orbital strut fracture does not automatically result in diplopia in patients with orbital blowout fractures. The integrity of the orbital periosteum plays a more essential role in hampering extraocular muscle displacement, thereby preventing symptomatic diplopia in these patients. Full article

The interface between material science and ophthalmic medicine is witnessing significant advances with the introduction of biopolymers in medical device fabrication. This review discusses the impact of biopolymers on the development of ophthalmic devices, such as intraocular lenses, stents, and various prosthetics. Biopolymers are emerging as superior alternatives due to their biocompatibility, mechanical robustness, and biodegradability, presenting an advance over traditional materials with respect to patient comfort and environmental considerations. We explore the spectrum of biopolymers used in ophthalmic devices and evaluate their physical properties, compatibility with biological tissues, and clinical performances. Specific applications in oculoplastic and orbital surgeries, hydrogel applications in ocular therapeutics, and polymeric drug delivery systems for a range of ophthalmic conditions were reviewed. We also anticipate future directions and identify challenges in the field, advocating for a collaborative approach between material science and ophthalmic practice to foster innovative, patient-focused treatments. This synthesis aims to reinforce the potential of biopolymers to improve ophthalmic device technology and enhance clinical outcomes. Full article

Background: Orbital floor fractures (OFFs) represent an interesting chapter in maxillofacial surgery, and one of the main challenges in orbit reconstruction is shaping and cutting the precise contour of the implants due to its complex anatomy. Objective: The aim of the retrospective study was to demonstrate, through pre- and postoperative volumetric measurements of the orbit, how the use of a preformed titanium mesh based on the stereolithographic model produced with 3D printers (“In-House” reconstruction) provides a better reconstruction volumetric compared to the intraoperatively shaped titanium mesh. Materials and Methods: The patients with OFF enrolled in this study were divided into two groups according to the inclusion criteria. In Group 1 (G1), patients surgically treated for OFF were divided into two subgroups: G1a, patients undergoing orbital floor reconstruction with an intraoperatively shaped mesh, and G1b, patients undergoing orbital floor reconstruction with a preoperative mesh shaped on a 3D-printed stereolithographic model. Group 2 (G2) consisted of patients treated for other traumatic pathologies (mandible fractures and middle face fractures not involving orbit). Pre- and postoperative orbital volumetric measurements were performed on both G1 and G2. The patients of both groups were subjected to the measurement of orbital volume using Osirix software (Pixmeo SARL, CH-1233 Bernex, Switzerland) on the new CT examination. Both descriptive (using central tendency indices such as mean and range) and regressive (using the Bravais–Pearson index, calculated using the GraphPad program) statistical analyses were performed on the recorded data. Results: From 1 January 2017 to 31 December 2021, of the 176 patients treated for OFF at the “Magna Graecia” University Hospital of Catanzaro 10 fulfilled the study’s inclusion criteria: 5 were assigned to G1a and 5 to G1b, with a total of 30 volumetric measurements. In G2, we included 10 patients, with a total of 20 volumetric measurements. From the volumetric measurements and statistical analysis carried out, it emerged that the average of the volumetric differences of the healthy orbits was ±0.6351 cm³, the standard deviation of the volumetric differences was ±0.3383, and the relationship between the treated orbit and the healthy orbit was linear; therefore, the treated orbital volumes tend to approach the healthy ones after surgical treatment. Conclusion: This study demonstrates that if the volume is restored within the range of the standardized mean, the diplopia is completely recovered already after surgery or after one month. For orbital volumes that do not fall within this range, functional recovery could occur within 6 months or be lacking. The restoration of the orbital volume using pre-modeled networks on the patient’s anatomical model, printed internally in 3D, allows for more accurate reconstructions of the orbital floor in less time, with clinical advantages also in terms of surgical timing. Full article

(1) Background: The Festival of Sacrifice, commonly known as Eid al-Adha, has a profound religious and cultural impact on nations with a Muslim majority. This festival is celebrated every year in Muslim countries; however, it is a time in which patients present to the emergency department with serious injuries. In our study, we examined current injuries occurring during Eid al-Adha in one of the largest hospitals in Türkiye, providing the largest patient population to date. This included mapping tendon and maxillofacial injuries, a first in the literature. To the best of our knowledge, this is the largest case series of injuries sustained during Eid al-Adha. The significance of this study lies in its potential to significantly benefit patients and healthcare systems by providing reference data. (2) Methods: Patients admitted to Ankara City Hospital during Eid al-Adha between 2019 and 2023 were examined. The demographic characteristics, injury patterns, and injury sites of patients admitted on the four days of Eid al-Adha were collected and analyzed. Maxillofacial traumas during the festival were analyzed. Tendon injuries on the left hand, which is the most commonly injured body part in the literature, were mapped into a figure. To compare the change in the number of patients, a comparison was made with the number of patients in our hospital for four consecutive days 2 weeks before Eid. Statistical analysis was performed using IBM SPSS Statistics for Windows. (3) Results: A total of 610 patients, including 101 female and 509 male patients, were included in this study. A statistically significant increase (p < 0.001 for all years) in hospital admission due to injury was observed. Individuals between the ages of 30 and 40 years were the most frequently admitted patients (n = 182, 29.8%). Knife injuries were significantly more common in all patients (p < 0.001). When the total number of patients was evaluated in terms of injured areas where patients present to the emergency department, left-hand injuries were found to be significantly more common than injuries in other areas (p < 0.001 for all). The extensor pollicus longus tendon was the most commonly injured tendon among all extensor and flexor tendon injuries (n = 104). The most commonly injured tendon was the flexor tendon in zone 2 of the first finger (n = 45). This study showed that injuries to the extensor tendon in zone 1 of the fifth finger, the flexor tendon in zone 4 of the first finger, and the flexor tendon in zone 1 of the fifth finger were never seen. Twenty-five patients with maxillofacial injuries were admitted to the hospital. Orbital floor fractures were the most common type of maxillofacial injury. The anesthesia technique we preferred for all patients was local anesthesia (n = 267). Wide-awake local anesthesia no tourniquet (WALANT) was the second most preferred anesthetic technique. The number of patients who were selected in a random 4-day period for each year were compared with the number of patients who came during Eid al-Adha. The Mann–Whitney U tests revealed a significant increase in injuries on the first day of Eid al-Adha compared to non-festival days (p < 0.001). However, no significant differences were observed on the subsequent days or in the overall injury counts during the festival period (p = 0.841 for day 2, p = 0.151 for day 3, p = 0.310 for day 4). (4) Conclusions: According to this study, which is the largest known case series in the literature, the number of patients admitted to the hospital increased annually. In our study, we observed a significant increase in injuries only on the first day of Eid al-Adha compared to a randomly selected 4-day period of the same year. Left-hand extensor tendon injuries from a knife were the most common injuries in middle-aged men. The extensor pollicis longus tendon was the most commonly injured extensor tendon, with zones 3 and 4 being the most commonly affected. The flexor pollicis longus tendon was the most commonly injured flexor tendon in zone 2. During this period, patients may not only need hand surgery but also maxillofacial plastic surgery. We recommend, in addition to the indications I,n the literature that during Eid al-Adha, the WALANT technique should be widely adopted in patients where local anesthesia will be insufficient. We also recommend utilizing a diagram to manage the patient load during Eid al-Adha and prevent overburdening the healthcare system. Full article

Enophthalmos is a severe complication of primary reconstruction following orbital floor fractures, oncological resections, or maxillo-facial syndromes. The goal of secondary orbital reconstruction is to regain a symmetrical globe position to restore function and aesthetics. In this article, we present a method of computer-assisted orbital floor reconstruction using a mirroring technique and a custom-made titanium or high-density polyethylene mesh printed using computer-aided manufacturing techniques. This reconstructive protocol involves four steps: mirroring of the healthy orbit computer tomography files at the contralateral affected site, virtual design of a customized implant, computer-assisted manufacturing (CAM) of the implant using Direct Metal Laser Sintering (DMLS) or Computer Numerical Control (CNC) methods, and surgical insertion of the device. Clinical outcomes were assessed using 3dMD photogrammetry and computed tomography measures in 13 treated patients and compared to a control group treated with stock implants. An improvement of 3.04 mm (range 0.3–6 mm) in globe protrusion was obtained for the patients treated with patient-specific implants (PSI), and no major complications have been registered. The technique described here appears to be a viable method for correcting complex orbital floor defects needing delayed reconstruction. Full article

Study Design: N/A. Objective: This study investigated the different ways of orbital floor reconstruction with special focus on reconstruction materials, imaging modalities (intra-/ post-operative), 3D printing and navigation. Methods: The heads of all governmental-run or associated cranio-maxillofacial surgery units in Switzerland, Austria and Germany were asked in person or received an email link for an online survey with 12 questions. Results: The return rate was 57%. The most often selected number of reconstructions was between 10 and 50 per year. Resorbable polydioxanone (PDS) foils (41%) and titanium mesh (18 %) were most often used to reconstruct the orbital floor. 31% use 3D Navigation intraoperative. Post-operative imaging was most often performed with CBCT (34.5%) in patients without complications, whereas CT scans were most often performed (63.3%) in patients with persisting complications. In total, 27% stated that they never use preformed orbital plates, and the remaining units use them more or less regularly. 48% have access to a 3D printer and 75% of the respondents use patient specific implants. Conclusions: The majority of the participating units prefer to use resorbablematerial for the reconstruction of the orbital floor defects. 3D printing facilities are not available in the majority of units, but it can be expected that the number of units with 3D printing facilities will rise in the near future. Full article

Purpose: This pilot study aims to evaluate the feasibility and effectiveness of computer-assisted surgery protocol with 3D-preformed orbital titanium mesh (3D-POTM), using presurgical virtual planning and intraoperative navigation in primary inferomedial orbital fracture reconstruction. Methods: Between March 2021 and March 2023, perioperative data of patients undergoing surgery for unilateral inferomedial orbital fracture treated with 3D-POTM were analyzed. Presurgical virtual planning with a Standard Triangle Language file of preformed mesh was conducted using the mirrored unaffected contralateral side as a reference, and intraoperative navigation was used. The reconstruction accuracy was determined by: correspondence between postoperative reconstruction mesh position with presurgical virtual planning and difference among the reconstructed and the unaffected orbital volume. Pre- and postoperative diplopia and enophthalmos were assessed. Results: Twenty-six patients were included. Isolated orbital floor fracture was reported in 14 (53.8%) patients, meanwhile medial wall and floor one in 12 (46.1%) cases. The mean difference between final plate position and ideal digital plan was 0.692 mm (95% CI: 0.601–0.783). The mean volume difference between reconstructed and unaffected orbit was 1.02 mL (95% CI: 0.451–1.589). Preoperative diplopia was settled out in all cases and enophthalmos in 19 (76.2%) of 21 patients. Conclusion: The proposed protocol is an adaptable and reliable workflow for the early treatment of inferomedial orbital fractures. It enables precise preoperative planning and intraoperative procedures, mitigating pitfalls and complications, and delivering excellent reconstruction, all while maintaining reasonable costs and commitment times. Full article

Assessing enophthalmos is critical in facial trauma patients, and there are many ways to do so. We have reviewed the various devices for measuring enophthalmos over the last 155 years. Knowing the benefits and drawbacks of each instrument is important in obtaining accurate results and interpreting them. We have reviewed the evolution of enophthalmos definitions and surgical indications. Although 2 mm of enophthalmos is commonly used as a cutoff for clinical significance, one should take into account individual patient factors, measurement techniques used, symptoms and/or the patient’s aesthetic concerns. The decision to operate must also be balanced with the risks of surgery, which may cause or worsen symptoms, such as diplopia, soft tissue deformities related to the surgical approach, and possibly blindness. We question whether enophthalmos greater than 2 mm should be considered the main criteria for corrective surgery. Full article

The integration of functional biomaterials in oculoplastic and orbital surgery is a pivotal area where material science and clinical practice converge. This review, encompassing primary research from 2015 to 2023, delves into the use of biomaterials in two key areas: the reconstruction of orbital floor fractures and the development of implants and prostheses for anophthalmic sockets post-eye removal. The discussion begins with an analysis of orbital floor injuries, including their pathophysiology and treatment modalities. It is noted that titanium mesh remains the gold standard for orbital floor repair due to its effectiveness. The review then examines the array of materials used for orbital implants and prostheses, highlighting the dependence on surgeon preference and experience, as there are currently no definitive guidelines. While recent innovations in biomaterials show promise, the review underscores the need for more clinical data before these new materials can be widely adopted in clinical settings. The review advocates for an interdisciplinary approach in orbital surgery, emphasizing patient-centered care and the potential of biomaterials to significantly enhance patient outcomes. Full article

Background: Orbital floor fractures involve damage to the orbital floor but not the infraorbital margin. Despite intensive research, they remain a controversial topic. The aim of this study was to investigate the relationship between parameters gathered by means of computed tomography (CT), the clinical presentation, and treatment outcomes, in patients suffering from orbital floor fractures. Methods: Forty patients with orbital floor fractures were included in this study. Information regarding diplopia, impaired ocular mobility, asymmetric eyeball placement, and infraorbital paresis was gathered from the medical records. Nine CT-based parameters were assessed. Two parameters were calculated, based on them. The follow-up data of 30 patients were analyzed. The results were statistically evaluated. The significance level was p < 0.05. Results: Statistical evaluation revealed multiple correlations between CT-based findings, symptoms, and treatment results. Among others, the hernia into the maxillary sinus was significantly larger in patients without improvement in infraorbital paresis (p = 0.0031) and without improvement in assymetric eyeball placement (p = 0.0037). There was no correlation between the entrapment of the rectus inferior muscle and impaired ocular mobility (p = 0.664431; p = 0.420289) and between the direct fracture of the infraorbital canal and infraorbital paresis (p = 0.371102). Conclusions: The widely assumed thesis that impaired ocular mobility in orbital fractures is caused by entrapment of the rectus inferior muscle is disproved by CT-based data. CT-based findings, symptoms, and treatment results in patients with orbital floor fractures were significantly correlated. A large hernia may be a negative prognostic factor. Full article