Search Results (51)

Interfacial coupling between CoFe₂O₄ (CFO) nanoparticles and oxidatively functionalized multi-walled carbon nanotubes (MWCNTs) enables controlled modulation of structural, optical, and spin dynamic properties in CFO–MWCNT nanocomposites. The solvothermal synthesis promotes nucleation of CFO on –COOH/–OH functional groups, ensuring uniform anchoring along the nanotube surface. X-ray diffraction confirms a cubic spinel phase with lattice expansion from 8.385 Å to 8.410 Å and crystallite growth from 18 nm to 25 nm, reflecting strain transfer and partial nanoparticle coalescence at the carbon interface. The observed bandgap narrowing from 2.72 eV to 2.50 eV, confirmed via Tauc plot analysis, is attributed to localized defect states induced by charge delocalization and orbital hybridization at the interface of the CFO–MWCNT boundary. DC magnetometry reveals a reduction in saturation magnetization from 46 emu/g to 35 emu/g due to diamagnetic dilution and interfacial spin canting, while coercivity decreases from 852 Oe to 841 Oe, indicating modified pinning and domain-wall dynamics associated with exchange-coupled interfaces. Ferromagnetic resonance measurements show a resonance field shift from 3495 G to 3500 G and an increase in the Landé g-factor from 1.97 to 2.00, signifying altered spin–orbit coupling and enhanced local magnetic perturbations. The spin–lattice relaxation time increases from 1.41 ns to 1.59 ns, demonstrating suppressed phonon-mediated relaxation and improved spin coherence across the hybrid network. Spin density rises from 3.72 × 10²² to 4.58 × 10²² spins/g, confirming an increase in unpaired electrons generated by orbital asymmetry at the interface. The anisotropy field and effective magnetocrystalline anisotropy constant exhibit pronounced modulation, evidencing strengthened exchange stiffness and altered Co²⁺/Fe³⁺ superexchange pathways. These results establish CFO-MWCNT nanocomposites as tuneable platforms for spintronic logic elements, high-frequency microwave attenuation, and magneto-optical device architectures. Full article

Optically detected magnetic resonance (ODMR) of nitrogen-vacancy centers in diamonds, in addition to optical excitation with green light, requires microwave excitation and thus a microwave structure. While many different microwave structures including microwave resonators have been presented in the past, none of them fulfilled the need to fit inside the miniaturized quantum magnetometer with limited space used in this work. This is why a novel microwave resonator design using commercially available printed circuit board technology is proposed. It is demonstrated that this design is of small form factor, highly power efficient and low-cost, with very good reproducibility, and in addition, it can be fabricated as a flexible printed circuit board to be bent and thus fit into the miniaturized sensor used in this work. The design choices made for the resonator and the way in which it was trimmed and optimized geometrically are presented and ODMR spectra made with a miniaturized quantum sensor in combination with such a resonator, which was fed by a microwave generator set to different microwave powers, are shown. These measurements revealed that a microwave power of −4 dBm is sufficient to excite the m_s = ±1 states of the nitrogen-vacancy centers, while exceeding −1 dBm already introduces sidebands in the ODMR spectrum. This underlines the efficiency of the resonator in exciting the nitrogen-vacancies of the diamond in the sensor platform used and can lead to development of low-power quantum sensors in the future. Full article

Among the many nanomaterials studied for biomedical uses, silica and gold nanoparticles have gained significant attention because of their unique physical and chemical properties and their compatibility with living tissues. Mesoporous silica nanoparticles (MSNs) have great stability and a large surface area, while gold nanoparticles (AuNPs) display remarkable optical features. Both types of nanoparticles have been widely researched for their individual roles in drug delivery, imaging, biosensing, and therapy. When combined with gadolinium (Gd), a common contrast agent, these nanostructures provide improved imaging due to gadolinium’s strong paramagnetic properties. This study focuses on incorporating gold nanoparticles and gadolinium into a silica matrix to develop a theranostic system. Various analytical techniques were used to characterize the nanocomposites, including infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA), nitrogen adsorption, scanning electron microscopy (SEM), dynamic light scattering (DLS), X-ray fluorescence (XRF), X-ray diffraction (XRD), vibrating sample magnetometry (VSM), and neutron activation analysis (NAA). Techniques like XRF mapping, XANES, nitrogen adsorption, SEM, and VSM were crucial in confirming the presence of gadolinium and gold within the silica network. VSM and EPR analyses confirmed the attenuation of the saturation magnetization for all nanocomposites. This validates their potential for biomedical applications in diagnostics. Moreover, activating gold nanoparticles in a nuclear reactor generated a promising radioisotope for cancer treatment. These results indicate the potential of using a theranostic nanoplatform that employs mesoporous silica as a carrier, gold nanoparticles for radioisotopes, and gadolinium for imaging purposes. Full article

The nitrogen-vacancy (NV) center magnetic sensor, leveraging nitrogen-vacancy quantum effects, enables high-sensitivity magnetic field detection via optically detected magnetic resonance (ODMR). However, conventional single-point integrated devices suffer from limitations such as inefficient regional magnetic field detection and challenges in discerning the directional variations of dynamic magnetic fields. To address these issues, this study proposes an array- based architecture that innovatively substitutes the conventional 532 nm laser with quantum-dot light-emitting diodes (QLEDs). Capitalizing on the advantages of QLEDs—including compatibility with micro/nano-fabrication processes, wavelength tunability, and high luminance—a 2 × 2 monolithically integrated magnetometer array was developed. Each sensor unit achieves a magnetic sensitivity of below 26 nT·Hz^−1/2 and a measurable range of ±120 μT within the 1–10 Hz effective bandwidth. Experimental validation confirms the array’s ability to simultaneously resolve multi-regional magnetic fields and track dynamic field orientations while maintaining exceptional device uniformity. This advancement establishes a scalable framework for the design of large-scale magnetic sensing arrays, demonstrating significant potential for applications requiring spatially resolved and directionally sensitive magnetometry. Full article

The interfacial Dzyaloshinskii–Moriya interaction (DMI) plays a pivotal role in stabilising and controlling the motion of chiral spin textures, such as Néel-type bubble domains, in ultrathin magnetic films—an essential feature for next-generation spintronic devices. In this work, we investigate domain wall (DW) dynamics in magnetron-sputtered Ta(3 nm)/Pt(3 nm)/Co(1 nm)/RuO₂(1 nm) [Ru(1 nm)]/Pt(3 nm) multilayers, benchmarking their behaviour against control stacks. Vibrating sample magnetometry (VSM) was employed to determine saturation magnetisation and perpendicular magnetic anisotropy (PMA), while polar magneto-optical Kerr effect (P-MOKE) measurements provided coercivity data. Kerr microscopy visualised the expansion of bubble-shaped domains under combined perpendicular and in-plane magnetic fields, enabling the extraction of effective DMI fields. Brillouin light scattering (BLS) spectroscopy quantified the asymmetric propagation of spin waves, and micromagnetic simulations corroborated the experimental findings. The Pt/Co/RuO₂ system exhibits a Dzyaloshinskii–Moriya interaction (DMI) constant of ≈1.08 mJ/m², slightly higher than the Pt/Co/Ru system (≈1.03 mJ/m²) and much higher than the Pt/Co control (≈0.23 mJ/m²). Correspondingly, domain walls in the RuO₂-capped films show pronounced velocity asymmetry under in-plane fields, whereas the symmetric Pt/Co/Pt shows negligible asymmetry. Despite lower depinning fields in the Ru-capped sample, its domain walls move faster than those in the RuO₂-capped sample, indicating reduced pinning. Our results demonstrate that integrating RuO₂ significantly alters interfacial spin–orbit interactions. Full article

Quantum sensing based on NV-centers in diamonds has been demonstrated many times in multiple publications. The majority of publications use lasers in free space or lasers with fiber optics, expensive optical components such as dichroic mirrors, or beam splitters with dichroic filters and expensive detectors, such as Avalanche photodiodes or single photon detectors, overall, leading to custom and expensive setups. In order to provide an inexpensive NV-based magnetometer setup for educational use in schools, to teach the three topics, fluorescence, optically detected magnetic resonance, and Zeeman splitting, inexpensive, miniaturized, off-the-shelf components with high reliability have to be used. The cheaper such a setup, the more setups a school can afford. Hence, in this work, we investigated LEDs as light sources, considered different diamonds for our setup, tested different color filters, proposed an inexpensive microwave resonator, and used a cheap photodiode with an appropriate transimpedance amplifier as the basis for our quantum magnetometer. As a result, we identified cheap and functional components and present a setup and show that it can demonstrate the three topics mentioned at a hardware cost <EUR 100. Full article

Recent achievements in ultrafast spin physics have enabled the use of heterostructures composed of ferromagnetic (FM)/non-magnetic (NM) thin layers for terahertz (THz) generation. The mechanism of THz emission from FM/NM multilayers has been typically ascribed to the inverse spin Hall effect (ISHE). In this work, we probe the mechanism of the ISHE by inserting a second ferromagnetic layer in the form of an alloy between the FM/NM system. In particular, by utilizing the co-sputtering technique, we fabricate Fe/L1₀-FePt/Pt ultra-thin heterostructures. We successfully grow the tetragonal phase of FePt (L1₀-phase) as revealed by X-ray diffraction and reflection techniques. We show the strong magnetic coupling between Fe and L1₀-FePt using magneto-optical and Superconducting Quantum Interference Device (SQUID) magnetometry. Subsequently, by utilizing THz time domain spectroscopy technique, we record the THz emission and thus we the reveal the efficiency of spin-to-charge conversion in Fe/L1₀-FePt/Pt. We establish that Fe/L1₀-FePt/Pt configuration is significantly superior to the Fe/Pt bilayer structure, regarding THz emission amplitude. The unique trilayer structure opens new perspectives in terms of material choices for the future spintronic THz sources. Full article

Magnetic zeolite nanocomposites (NCs) have emerged as a promising class of hybrid materials that combine the high surface area, porosity, and ion exchange capacity of zeolites with the magnetic properties of nanoparticles (NPs), particularly iron oxide-based nanomaterials. This review provides a comprehensive overview of the synthesis, characterization, and diverse applications of magnetic zeolite NCs. We begin by introducing the fundamental properties of zeolites and magnetic nanoparticles (MNPs), highlighting their synergistic integration into multifunctional composites. The structural features of various zeolite frameworks and their influence on composite performance are discussed, along with different interaction modes between MNPs and zeolite matrices. The evolution of research on magnetic zeolite NCs is traced chronologically from its early stages in the 1990s to current advancements. Synthesis methods such as co-precipitation, sol–gel, hydrothermal, microwave-assisted, and sonochemical approaches are systematically compared, emphasizing their advantages and limitations. Key characterization techniques—including X-Ray Powder Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning and Transmission Electron Microscopy (SEM, TEM), Thermogravimetric Analysis (TGA), Nitrogen Adsorption/Desorption (BET analysis), Vibrating Sample Magnetometry (VSM), Zeta potential analysis, Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), and X-Ray Photoelectron Spectroscopy (XPS)—are described, with attention to the specific insights they provide into the physicochemical, magnetic, and structural properties of the NCs. Finally, the review explores current and potential applications of these materials in environmental and biomedical fields, focusing on adsorption, catalysis, magnetic resonance imaging (MRI), drug delivery, ion exchange, and polymer modification. This article aims to provide a foundation for future research directions and inspire innovative applications of magnetic zeolite NCs. Full article

A stabilization method utilizing MEMS technology combined with a liquid crystal variable retarder (LCVR) was developed to enhance fiber laser output power stability and was applied to a spin-exchange relaxation-free (SERF) atomic magnetometer. Comparative experiments demonstrated that the unstabilized laser output exhibited $2.8\%$ power fluctuations over a 500 s period, while the stabilized laser reduced this to $0.2\%$. Spectral density analysis confirmed suppressed frequency-domain fluctuations, indicating improved robustness against disturbances. Furthermore, the stabilized laser also reduced optical noise in SERF magnetometry, achieving a sensitivity of $19.2\mathrm{fT}/{\mathrm{Hz}}^{1/2}$. These results validate that the method optimizes both time- and frequency-domain performance, thereby advancing high-precision SERF magnetometry. Full article

Thulium iron garnet (Tm₃Fe₅O₁₂, TmIG) is a promising material for next-generation spintronic and quantum technologies owing to its high Curie temperature and strong perpendicular magnetic anisotropy. However, conventional magnetometry techniques are limited by insufficient spatial resolution and sensitivity to probe local magnetic phase transitions and critical spin dynamics in thin films. In this study, we present the first quantitative investigation of local magnetic field fluctuations near the Curie temperature in TmIG thin films using nitrogen-vacancy (NV) center-based quantum sensing. By integrating optically detected magnetic resonance (ODMR) and NV spin relaxometry (T₁ measurements) with macroscopic techniques such as SQUID magnetometry and Hall effect measurements, we systematically characterize both the static magnetization and dynamic spin fluctuations across the magnetic phase transition. Our results reveal a pronounced enhancement in NV spin relaxation rates near 360 K, providing direct evidence of critical spin fluctuations at the nanoscale. This work highlights the unique advantages of NV quantum sensors for investigating dynamic critical phenomena in complex magnetic systems and establishes a versatile, multimodal framework for studying local phase transition kinetics in high-temperature magnetic insulators. Full article

Precise magnetometry is vital in numerous scientific and technological applications. At the forefront of sensitivity, optical atomic magnetometry, particularly techniques utilizing nonlinear magneto-optical rotation (NMOR), enables ultraprecise measurements across a broad field range. Despite their potential, these techniques reportedly lose sensitivity in higher magnetic fields, which is attributed to the alignment-to-orientation conversion (AOC) process. In our study, we utilized light with continuously rotating linear polarization to avoid the AOC, which produced robust optical signals and achieving high magnetometric sensitivity over a dynamic range nearly three times greater than Earth’s magnetic field. We demonstrated that employing rotating polarization surpasses other NMOR techniques that use modulated light. Our findings also indicate that the previously observed signal deterioration was not due to the AOC, suggesting an alternative cause for this decline. Full article

The assessment of superparamagnetic nanoparticle heating is crucial for effective hyperthermia. AC magnetometry can be used to determine the specific absorption rate (SAR) of nanoparticles, assuming proper calorimetric calibration. We show that an AC magnetometer developed in our laboratory can be used simultaneously as a calorimeter for calibrating measurements. An electrical circuit with lumped parameters that are equivalent to the non-adiabatic calorimeter and that incorporates the effects of heat flow from the excitation coil, the surrounding environment, and the sample is presented. Quantitative thermal system identification was performed using global optimization, which fitted the temperature measured by the three fiber-optic probes to the simulated temperature transient curves. The identified model was used to estimate the thermal power generated in the measurement sample using a resistor with a controlled current value. The results demonstrate significant error reduction, particularly at lower heating powers, where external heat transfer becomes more influential. At low heating power values (around 25 mW), the error was reduced from 16.09% to 2.36%, with less pronounced improvements at higher power levels. The model achieved an overall accuracy of less than 2.5% across the 20–200 mW calibration range, a substantial improvement over the corrected-slope method. The value of the true thermal power of nanoparticles can be obtained using the calibrated calorimeter. Full article

AuCo alloys are promising materials due to their magnetic, magneto-optical and magneto-plasmonic properties. These two metals are characterized by having zero mutual solubility at room temperature, significant differences in their physical and mechanical parameters and positive enthalpy of mixing. In the form of bulk samples, AuCo alloys can be synthesized by high-pressure torsion. In this study, the influence of the thermal conditions of high-pressure torsion synthesis and subsequent annealing procedures on the phase composition, magnetic domain structure and bulk magnetic properties of non-equilibrium AuCo alloys are investigated. Magnetic atomic force microscopy revealed the presence of a different magnetic domain structure in the AuCo alloys after high-pressure torsion synthesis at −193 and 23 °C. Specifically, in the AuCo alloy synthesized after 10 revolutions at 23 °C, a stripe domain structure was formed, whereas, after cryo-deformation, blurred low-contrast domain walls prevailed in the allow. The regularities of the magnetic domain structure were compared with the magnetic response of the bulk sample obtained by vibrating sample magnetometry. It was found that the saturation magnetization was slightly higher for the alloy synthesized at 23 °C, while the coercive force was higher for the AuCo alloy synthesized at −193 °C. Thermal treatment of these alloys leads to an increase in coercivity which doubles and reaches a plateau after annealing at 310 °C after cryo-deformation. Full article

Double perovskite materials have emerged as key players in the realm of advanced materials due to their unique structural and functional properties. This research mainly focuses on the synthesis and comprehensive characterization of Ba₂CoWO₆ double perovskite nanopowders utilizing a high-temperature conventional solid-state reaction technique. The successful formation of Ba₂CoWO₆ powders was confirmed through detailed analysis employing advanced characterization techniques. Rietveld refinement of X-ray diffraction (XRD) and Raman data established that Ba₂CoWO₆ crystallizes in a cubic crystal structure with the space group Fm-3m, indicative of a highly ordered perovskite lattice. The typical crystallite size, approximately 65 nm, highlights the nanocrystalline nature of the material. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) discovered a distinctive morphology characterized by spherical shaped particles, suggesting a complex particle formation process influenced by synthesis conditions. To probe the electronic structure, X-ray Photoelectron Spectroscopy (XPS) identified cobalt and tungsten valence states, critical for understanding dielectric properties associated with localized charge carriers. The semiconducting character of the synthesized Ba₂CoWO₆ nanocrystalline material was confirmed through UV-Visible analysis, which revealed an energy bandgap value of 3.3 eV, which aligns well with the theoretical predictions, indicating the accuracy and reliability of the experimental results. The photoluminescence spectrum exhibited two distinct emissions in the blue-green region. These emissions were attributed to the transitions ³P₀→³H₄, ³P₀→³H₅, and ³P₀→³H₆, primarily resulting from the contributions of Ba²⁺ ions. The dielectric characteristics of the compound were analyzed across a different range of frequencies, spanning from 1 kHz to 1 MHz. Magnetic characterization using Vibrating Sample Magnetometry (VSM) revealed antiferromagnetic behavior of Ba₂CoWO₆ ceramics at room temperature, attributed to super-exchange interactions between Co³⁺ and W⁵⁺ ions mediated by oxygen ions in the perovskite lattice. Additionally, first-principles calculations based on the Generalized Gradient Approximation (GGA+U) with a modified Becke–Johnson (mBJ) potential were employed to gain a deeper understanding of the structural and electronic properties of the materials. This approach involved systematically varying the Hubbard U parameter to optimize the description of electron correlation effects. These results deliver an extensive understanding of the structural, optical, morphological, electronic, and magnetic properties of Ba₂CoWO₆ ceramics, underscoring their potential for electronic and magnetic device applications. Full article

A novel approach to developing lateral flow assays (LFAs) for the detection of CYFRA 21-1 (cytokeratin 19 fragment, a molecular biomarker for epithelial-origin cancers) is proposed. Magnetic bioconjugates (MBCs) were employed in combination with advanced optical and magnetic tools to optimize assay conditions. The approach integrates such techniques as label-free spectral-phase interferometry, colorimetric detection, and ultrasensitive magnetometry using the magnetic particle quantification (MPQ) technique. For the first time in LFA applications, the MPQ-based and colorimetry-based detection methods were compared side by side, and superior analytical performance was demonstrated. The limit of detection (LOD) of 0.9 pg/mL was achieved using MPQ, and 2.9 pg/mL with optical detection. This study has demonstrated that MPQ provides elimination of signal saturation, higher sensitivity (slope of the calibration curve), and a 19-fold wider dynamic range of detected signals. Both optical and magnetic detection results are comparable to the best laboratory-based tests with the added benefits of a 20-min assay duration and the LFA format convenience. The assay effectiveness was validated in human serum and artificial saliva, and high recovery rates were observed. The proposed approach offers rapid and reliable detection of molecular biomarkers and holds significant potential for point-of-care diagnostics, particularly in resource-limited settings. Full article