Search Results (187)

Novel A-D-A (acceptor–donor–acceptor)-type molecules were synthesized and tested in organic photovoltaics (OPV) devices. For a pristine film of compound 1b with a 2,2′-(naphtho[2,3-b]thiophene-4,9-diylidene)dipropanedinitrile A unit and carbazole-based donor D unit, efficient exciton splitting by intermolecular electron transfer was proved. The observation of the out-of-phase electron spin echo in the pristine 1b film unambiguously testifies to a high yield of charge-transfer state formation. Despite this, the yield of free charge generation in pristine 1b is low due to the fast geminate and non-geminate recombination. This process is detrimental for OPV performance when the compound capable of exciton self-splitting is used as an acceptor component of the bulk heterojunction (BHJ) active layer because of the fast charge recombination within this component. Exciton self-splitting can be of general significance for push–pull OPV acceptors or donors in bulk heterojunctions, although it can be masked by other photophysical processes in the BHJ active layer. This is the reason why molecules with a strong intermolecular charge-transfer band are not suitable components of the active layer of efficient OPV devices. Full article

Developing organic photothermal agents that are highly stable and have tunable electronic properties is important for advancing low-invasive cancer therapy. In this study, we present the synthesis and evaluation of three conjugated photothermal agents inspired by non-fullerene Y-series acceptors: the small molecule BTPT-OD, as well as two of its polymer derivatives with regular (r-BTPT) and irregular (ir-BTPT) structures. All of the compounds absorb light effectively in the red and near-infrared spectral ranges, with absorption maxima from 734 to 746 nm, and form stable nanoparticles (NPs) via nanoprecipitation, ranging in size from 13 to 39 nm. NPs exhibited negative surface charges, with ζ-potentials of −12.9, −15.5, and −17.9 mV for BTPT-OD, r-BTPT, and ir-BTPT NPs, respectively. Irradiation at a wavelength of 730 nm revealed that r-BTPT and ir-BTPT polymer NPs exhibited a 22- to 40-fold greater phototoxicity against A-549, Sk-Br-3, and MCF-7 human carcinoma cells than the non-polymeric analogue BTPT-OD. The measured photothermal conversion efficiencies ranged from 24 to 27 ± 5%. At the same time, the intracellular ROS generation quantified by the 2′,7′-dichlorodihydrofluorescein diacetate (DCFH-DA) assay was low, allowing us to propose heat-mediated photothermal therapy as a more significant cell death predictor than ROS-mediated photodynamic therapy. This work is one of the first to compare small and polymeric non-fullerene acceptor materials for phototherapy purposes, demonstrating the advantages of using polymers. Full article

ITIC’s superior electron-accepting capacity and efficient oxygen reduction motivated the design of a sensor to enhance sensitivity, selectivity, and stability over conventional oxygen-dependent or fullerene-based systems. As oxygen acts as the terminal reagent in enzymatic glucose oxidation, we developed an ITIC-mediated glucose oxidase (GOx) biosensor on glassy carbon (GCE) and screen-printed carbon electrodes (SPCE). ITIC, a non-fullerene organic semiconductor, was drop-cast onto the electrode to catalyze oxygen reduction, followed by GOx immobilization in a chitosan matrix. Scanning electron microscopy (SEM) confirmed uniform, ultrathin coatings without significant morphological changes upon ITIC and GOx deposition. Electrochemical studies (cyclic (CV) and differential pulse voltammetry (DPV)) revealed a distinct ITIC reduction peak at –0.7 V (vs. Ag/AgCl) and a glucose-dependent current decrease, consistent with mediated electron transfer during enzymatic oxidation. Under optimized conditions, the GCE-based biosensor showed a sensitivity of 10.7 μA L mmol⁻¹, a linear dynamic range (LDR) of 0.10–1.00 mmol L⁻¹, and detection (LOD)/quantification (LOQ) limits of 0.02 and 0.06 mmol L⁻¹, respectively. The SPCE device displayed sensitivity (3.8 μA L mmol⁻¹) and maintained excellent linearity (R² > 0.99) with LOD and LOQ of 0.05 and 0.16 mmol L⁻¹. Both platforms showed good precision (RSD < 5%) and reliable recovery in deproteinized plasma and artificial tears (90–104%). The superior performance of the GCE is attributed to higher ITIC loading, faster electron transfer, and reduced background current, while the SPCE offers a low-cost, disposable format with sufficient analytical performance for point-of-care glucose monitoring. Full article

Organic photovoltaics (OPVs) based on non-fullerene acceptors (NFAs) are rapidly advancing as lightweight, flexible, and low-cost solar technologies, with power conversion efficiencies approaching 20%. To ensure that environmental sustainability progresses symmetrically alongside performance improvements, it is essential to quantify the environmental footprint of these emerging technologies, particularly during early development stages when material and process choices remain adaptable. This study presents a cradle-to-gate life cycle assessment (LCA) of PTB7-Th:ZY-4Cl solar cells, aiming to identify asymmetries in environmental impact distribution and guide eco-efficient optimization strategies. Using laboratory-scale fabrication data, global warming potential (GWP), cumulative energy demand (CED), acidification (AP), eutrophication (EP), and fossil fuel depletion (FFD) were evaluated via the TRACI methodology. Results reveal that electricity consumption in thermomechanical operations (ultrasonic cleaning, spin coating, annealing, and stirring) disproportionately dominates most impact categories, while chemical inputs such as PEDOT:PSS, PTB7-Th:ZY-4Cl precursors, and solvents contribute significantly to fossil fuel depletion. Substituting grid electricity with renewable sources (hydro, wind, PV) markedly reduces GWP, and solvent recovery or replacement with greener alternatives offers further gains. Although extrapolation to a 1 m² pilot-scale module reveals impacts higher than established PV technologies, prospective scenarios with realistic efficiencies (10%) and lifetimes (10–20 years) suggest values of ~150–500 g CO₂-eq/kWh—comparable to fullerene OPVs and approaching perovskite and thin-film benchmarks. These findings underscore the value of early-stage LCA in identifying asymmetrical hotspots, informing material and process optimization, and supporting the sustainable scale-up of next-generation OPVs. Full article

The operational stability of organic solar cells critically depends on the excited-state characteristics of electron acceptor materials. Through systematic quantum chemical calculations on four representative acceptors (PCBM, ITIC, Y6, and TBT-26), this study reveals fundamental spectra–stability relationships. Non-fullerene acceptors demonstrate superior light-harvesting with systematically tuned energy levels and significantly lower exciton binding energies (2.05–2.12 eV) compared to PCBM (2.97 eV), facilitating efficient charge separation. Structural dynamics analysis uncovers distinct stability mechanisms: ITIC maintains exceptional structural integrity (anionic RMSD = 0.023, S₁ RMSD = 0.134) with superior bond preservation, ensuring balanced performance–stability. Y6 exhibits substantial structural relaxation in excited states (S₁ RMSD = 0.307, T₁ RMSD = 0.262) despite its low exciton binding energy, indicating significant non-radiative losses. TBT-26 employs selective bond stabilization, preserving acceptor–proximal bonding despite considerable anionic flexibility. These findings establish that optimal molecular design requires both favorable electronic properties and structural preservation in photoactive states, providing crucial guidance for developing efficient and stable organic photovoltaics. Full article

Non-graphitising carbons are an important class of solid carbon materials which cannot be transformed into graphite by heat treatment, even at 3000 °C. Also known as hard carbons, they are of growing importance as anode materials for lithium-ion or sodium-ion batteries. When activated they are widely used in the purification of air and water supplies. However, despite decades of research, the detailed atomic structures of these materials has still not been fully established. Many structural models have been put forward, beginning with the classic work of Rosalind Franklin, but none have gained universal acceptance. This review gives a historical survey of models for the structure of non-graphitising carbons and summarizes the latest thinking on the subject, which is based on the idea that the structure contains non-hexagonal rings, as in the fullerenes and fullerene-related structures. Studies using aberration-corrected transmission electron microscopy have provided important support for this idea. Full article

Alzheimer’s disease (AD) requires early and accurate identification of affected brain regions, which can be achieved through the detection of specific biomarkers to enable timely intervention. Carbon nanomaterials (CNMs), including graphene derivatives, carbon nanotubes, graphitic carbon nitride, carbon black, fullerenes, and carbon dots, offer high conductivity, large electroactive surface area, and versatile surface chemistry that enhance biosensor performance. While such properties benefit a wide range of transduction principles (e.g., electrochemical, optical, and plasmonic), this review focuses on their role in electrochemical biosensors. This review summarizes CNM-based electrochemical platforms reported from 2020 to mid-2025, employing aptamers, antibodies, and molecularly imprinted polymers for AD biomarker detection. Covered topics include fabrication strategies, transduction formats, analytical performance in complex matrices, and validation. Reported devices achieve limits of detection from the femtomolar to picogram per milliliter range, with linear ranges typically spanning 2–3 orders of magnitude (e.g., from femtomolar to picomolar, or from picogram to nanogram per milliliter levels). They exhibit high selectivity against common interferents such as BSA, glucose, uric acid, ascorbic acid, dopamine, and non-target peptides, along with growing capabilities for multiplexing and portable operation. Remaining challenges include complex fabrication, limited long-term stability and reproducibility data, scarce clinical cohort testing, and sustainability issues. Opportunities for scalable production and integration into point-of-care workflows are outlined. Full article

Thick active layers are crucial for scalable production of organic photodetectors (OPDs). However, most OPDs with active layers thicker than 200 nm typically exhibit decreased photocurrents and responsivities due to exciton diffusion and prolonged charge transport pathways. To address these limitations, we designed and synthesized PFBDT-8ttTPD, a fluorinated polymer donor. The strategic incorporation of fluorine effectively enhanced the charge carrier mobility, enabling more efficient charge transport, even in thicker films. OPDs combining PFBDT−8ttTPD with IT−4F or Y6 non-fullerene acceptors showed a substantially lower dark current density (J_d) for active layer thicknesses of 250−450 nm. Notably, J_d in the IT-4F-based devices declined from 8.74 × 10⁻⁹ to 4.08 × 10⁻¹⁰ A cm⁻² under a reverse bias of −2 V, resulting in a maximum specific detectivity of 3.78 × 10¹³ Jones. Meanwhile, Y6 integration provided near-infrared sensitivity, with the devices achieving responsivity above 0.48 A W⁻¹ at 850 nm and detectivity over 10¹³ Jones up to 900 nm, supporting broadband imaging. Importantly, high-quality thick films (≥400 nm) free of pinholes or defects were fabricated, enabling scalable production without performance loss. This advancement ensures robust photodetection in thick uniform layers and marks a significant step toward the development of industrially viable OPDs. Full article

Hair loss (alopecia) is a common disorder caused by an interruption in the body’s cycle of hair production. This pathology negatively affects the psychoemotional state of patients and significantly reduces their quality of life. The currently available medical treatments (including minoxidil therapy) are effective in arresting the progression of the disease; however, they allow only partial regrowth of hair at best. A significant clinical result occurs only with regular drug use. There is still great interest in finding new drugs for the treatment of alopecia. In this study, we aimed to examine the effect of an aqueous dispersion of unmodified fullerene C60 (ADF) on hair growth. ADF, produced by a unique technology, is biocompatible and non-toxic. Nu/nu mice were subcutaneously injected (2 μg/animal) every two days for a period of 11 days with ADF and, for control purposes, with phosphate-buffered saline (PBS). It was shown that ADF stimulated hair growth. Histological analysis of the nu/nu mice skin areas showed that animals treated with ADF had significantly more (about twice as many) hair follicles in the anagen phase compared to mice treated with PBS. The effect on hair growth persisted even after discontinuation of ADF administration. Analysis of gene expression demonstrated that ADF affected the Wnt-signaling pathway, increased the expression of the Wnt10b (wingless-type Mouse Mammary Tumor Virus integration site family, member 10B) factor, angiogenetic factors, and downregulated tumor necrosis factor-alpha levels. We propose that the mechanism of ADF action is likely related to its ability to attract macrophages to the hair follicle microenvironment and promote their polarization to the M2 phenotype. In addition, using molecular modeling, we tried to substantiate our hypothesis about the interaction of ADF with the adenosine A2A receptor, which may cause a decrease in tumor necrosis factor-alpha production. Thus, ADF may become a promising drug for the development of new approaches to the treatment of alopecia associated with immune disorders. Full article

This article presents computational studies of non-metal fullerene endohedrals, which are useful for understanding and interpreting experimental results. The encapsulated non-metal species are simple molecules like H₂, N₂, CO, HF, NH₃, H₂O₂, H₂O, and their aggregates. Predictions of thermodynamic stability and reaction populations are reviewed, based on quantum-chemical and statistical–thermodynamic treatments. As fullerene syntheses are performed at high temperatures, some of the calculations are based on both the encapsulation potential energy and the encapsulation Gibbs energy changes. Full article

A series of novel discotic liquid crystalline donor–acceptor hybrid heterojunctions were prepared by blending the triphenylene derivative (T5E36) as donor and perylene tetracarboxylic esters as acceptor. Mesophases of blends were characterized by using polarized optical microscopy, differential scanning calorimetry, and X-ray diffraction. Results suggest that all the blends formed liquid crystalline phases, where both compounds in the blends self-assembled separately into columns yet cooperatively contributed to the overall hexagonal or tetragonal columnar mesophase structure. The charge carrier mobilities were characterized using a time-of-flight technique. The phase-separated columnar nanostructures of the donor and acceptor components play an important role in the formation of molecular heterojunctions exhibiting highly efficient ambipolar charge transport, with mobilities on the order of 10⁻³ cm² V⁻¹ s⁻¹. These blends with ambipolar transport properties have great potential for application in non-fullerene organic solar cells, particularly in bulk heterojunction architectures. Full article

This study investigates the influence of temperature on the linear and nonlinear optical properties of ternary organic thin films for solar cell applications. Three-component organic thin films (poly({4,8-bis[(2-ethylhexyl)oxy]benzo [1,2-b:4,5-b′]dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno[3,4-b]thiophenediyl}) and (poly([2,6′-4,8-di(5-ethylhexylthienyl)benzo[1,2-b;3,3-b]dithiophene]{3-fluoro-2[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl}), marked PTB7 and PTB7th- donors, PCBM, phenyl-C61-butyric acid methyl ester acceptor, and Y5: 2,2′-((2Z,2′Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl-12,13-dihydro[1,2,5]thiadiazolo[3,4e]thieno[2′,3′:4′,5′] thieno[2′,3′:4,5]pyrrolo[3,2-g] thieno[2′,3′:4,5]thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(3-oxo-2,3-dihydro1H-indene-2,1-diylidene))dimalononitrile) and Y6 non-fullerene acceptors: (2,2′-((2Z,2′Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl-12,13- dihydro-[1,2,5]thiadiazolo[3,4- e] thieno [2,″3″:4′,5′]thieno [2′,3′:4,5]), non-fullerene acceptors, were analyzed using spectroscopic ellipsometry and third-harmonic generation techniques across a temperature range of 30 °C to 120 °C. The absorption spectra of the ternary layers remained largely stable with temperature, but ellipsometry revealed temperature-dependent changes in layer thickness (a few percent increase during heating) and variations in refractive index and extinction coefficients, suggesting modest structural alterations. Analysis using a gradient model indicated that film composition varies with thickness. Third-harmonic generation measurements showed a decrease in χ⁽³⁾ after annealing, with the most significant change observed in the PTB7th:Y5:PCBM layer. Full article

Fullerenes and fullerenols exhibit antioxidant and anti-inflammatory properties, making them promising candidates for Alzheimer’s disease (AD) therapy. Unlike conventional anti-inflammatory drugs, these compounds have multitargeted effects, including their ability to inhibit amyloid fibril formation. However, few studies have explored their efficacy in high-validity AD models. Female APPswe/PS1E9 (APP/PS1) mice and their wild-type (WT) littermates were orally administered with fullerene C₆₀ (0.1 mg/kg/day) or fullerenol C₆₀(OH)₂₄ (0.15 mg/kg/day) for 10 months starting at 2 months of age. Behavioral assessments were performed at 12 months of age. Amyloid plaque density and size were analyzed in the brain regions using Congo red staining. The expression of genes related to inflammation and plasticity was examined, and an in vitro assay was used to test the toxicity of fullerenol and its effect on amyloid β peptide 42 (Aβ42)-induced reactive oxygen species (ROS) production. Fullerenol reduced the maximum plaque size in the cortex and hippocampus, decreased the small plaque density in the hippocampus and thalamus, and prevented an increase in glial fibrillary acidic protein (GFAP) positive cell density in the mutants. Both treatments improved cognitive and emotional behaviors and reduced Il1β and increased Sirt1 expression. In vitro, fullerenol was non-toxic across a range of concentrations and reduced Aβ42-induced ROS production in brain endothelial cells and astrocytes. Long-term administration of fullerene or fullerenol improved behavioral and molecular markers of AD in APP/PS1 mice, with fullerenol showing additional benefits in reducing amyloid burden. Full article

To overcome the negative effects of the biochemical application of nano-substances in medicine (toxicity problem), using the example of fullerene C₆₀’s first derivative (fullerenol, FD-C₆₀), we show that their biophysical effect is possible through non-covalent hydrogen bonds when around FD-C₆₀ water layers are formed. SD-C₆₀ (Zeta potential is −43.29 mV) is much more stable than fullerol (Zeta potential is −25.85 mV), so agglomeration/fragmentation of the fullerol structure, due to instability, can cause toxic effects. When fullerol in solution was exposed to an oscillatory magnetic field with Re (real) part [250/−92 mT, H(ωt) = Acos(ωt)], water layers around FD-C₆₀ (fullerenol) are formed according to the Penrose process of 3D tiling formation, and the second derivative, SD-C₆₀ (or 3HFWC), is self-organized. However, when Im (imaginary) part [250/−92 mT, H(ωt) = Bisin (ωt)] of the external magnetic field is applied in addition to SD-C₆₀, ordered water chains and bubbling of water (“micelle”) are formed as a third derivative (TD-C₆₀). Fullerol (FD-C₆₀) interacts with biological structures biochemically, while the second (SD-C₆₀) and third (TD-C₆₀) derivatives act biophysically via non-covalent hydrogen bond oscillation. SD-C₆₀ and TD-C₆₀ significantly increased water solubility and reduced toxicity. The paper explains the synthesis of SD-C60 and TD-C60 from FD-C60 (fullerol) as a precursor by the influence of an oscillatory magnetic field (“Yin-Yang” principle) on hydrogen bonds in order to create water layers around fullerol. Examples of biomedical applications (cancer and Alzheimer’s) of this synergetic complex are given. This study shows that the “Yin-Yang” machinery, based on the nanophysics of C₆₀ molecules and non-covalent hydrogen bonds, is possible. The first attempt has been composed to synthesize nanomaterial for biophysical vibrational nanomedicine. Full article

A direct non-catalytic synthesis of a new water-soluble polynitro-hydroxylated fullerene derivative, C₆₀(NO₂)₁₈(OH)₂, was carried out using a mixture of concentrated nitric and sulfuric acids. The resulting poly-nitro adduct was comprehensively characterized by elemental C-H-N analysis, energy-dispersive X-ray spectroscopy, infrared (IR) and electron spectroscopy, nuclear magnetic resonance (NMR), high-performance liquid chromatography (HPLC), and thermogravimetric analysis (TGA). A detailed investigation of the physicochemical properties of aqueous solutions of C₆₀(NO₂)₁₈(OH)₂ demonstrated that the synthesized compound is a previously undescribed mixed polynitro-hydroxyl adduct of light fullerene C₆₀, featuring a high degree of nitration (18 nitro groups per fullerene core). The composition and structure of the adduct were confirmed by spectroscopic and refractometric analyses. In terms of redox behavior, the compound exhibits significant reducing and antioxidant properties. These physicochemical characteristics suggest the potential of C₆₀(NO₂)₁₈(OH)₂ for further development as a biocompatible nanomaterial suitable for medical applications. Full article