Search Results (84)

Archaeological mollusk shells, such as those of Littorina obtusata/fabalis, hold valuable information about past human behavior and cultural practices. However, the original coloration of these shells, crucial for understanding their symbolic significance, is often lost due to taphonomic processes. Raman spectroscopy is a powerful technique for non-destructive analysis of archaeological samples, enabling the identification of pigments and mineralogical components. In this study, we present a methodology to predict, using Raman spectroscopy and k-means clustering, the original coloration of archaeological L. obtusata/fabalis shells which have lost their original coloration. Raman spectra were acquired from both modern shells, exhibiting a range of natural colors, and archaeological shell samples from La Chora cave (Cantabria, northern Spain). Spectral data were preprocessed to remove noise and baseline effects, and k-means clustering was applied to group the spectra based on their inherent spectral similarities. By comparing the spectral signatures of the archaeological samples with those of the modern shells within the generated clusters, we inferred the likely original coloration of the archaeological specimens. This approach provides a quantitative framework for predicting archaeological shell colors. Full article

A multiproxy methodology has been employed to characterise two granite anchors discovered on the seabed near the island of Nueva Tabarca (Alicante, Southeast Spain). According to the significant archaeological context where they were found, the studied anchors can be dated from the Roman ages (late Republican period). One of the most interesting aspects is the absence of regional geological outcrops with rocks compatible with the granite used in the production of the anchor, which shows a foreign origin consistent with the connection of the anchor to maritime transport across the Mediterranean Sea. The lack of precise information about the artifact’s origin underscores the interest and need for the application of petrological techniques to determine its provenance. The methodology utilised encompasses five distinct techniques: (1) non-destructive textural analysis using X-ray microcomputed tomography; (2) K–Ar dating; (3) petrological characterisation through optical microscopy; (4) geochemical characterisation using X-ray fluorescence and atomic absorption spectrometry. The results allow for a comparison of the anchor rock’s characteristics with various granite outcrops along the Mediterranean coasts (Eastern, Central, and Western sectors), suggesting potential source areas based on petrological compatibility with the material under study. The findings point to the origin of the Nueva Tabarca granite anchor being granite outcrops in Southern Italy (Calabria), reinforcing the connection between the Spanish southeastern coasts and Southern Italy. These results highlight the utility and significance of multiproxy petrological methodologies in the geoarchaeological study of decontextualised artifacts. Full article

This study investigates the subsurface remains of Jaundole Castle, a 14th-century medieval fortress located on Dole Island near Riga, Latvia. The castle, which has left no visible surface ruins, is known only from historical documents and maps. To assess whether its buried remains could be detected, a non-invasive ground penetrating radar (GPR) survey was carried out across five targeted grids. The results revealed multiple linear and circular anomalies consistent with historical records of the castle’s layout, including possible foundations of walls and towers. These findings demonstrate that GPR, when combined with historical map and image analysis, can effectively locate, and delineate lost architectural features. The integration of historical sources and geophysical data provides a replicable model for the investigation of other completely buried archaeological sites. This work contributes to the development of non-destructive prospection strategies and supports the planning of future archaeological excavations and conservation actions. Full article

Egyptian Blue was the first synthetic pigment by humankind. It contains of cuprorivaite, which is a calcium-copper-silicate (CaCuSi₄O₁₀). This study reports the results of a mineralogical and computer tomographic study of Egyptian Blue finds from Aguntum in East Tyrol along with Retznei and Wagna (formerly Flavia Solva) from southern Styria in Austria. The present work aims to extend our understanding of the processes involved in the production of the artificial pigment Egyptian Blue. The samples were investigated with respect to their elemental composition and spatial distribution of the calcium-copper-silicate cuprorivaite CaCuSi₄O₁₀ and then compared with data from previous studies. Thin sections of an Egyptian Blue sphere from Aguntum were examined using optical microscopy (OP), micro-X-ray fluorescence analysis (μ-XRF) and scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX). The pigment’s initial mixture as well as the manufacturing process seem to be the decisive factor for the quality of the final product. A relationship between the presence of trace iron (Fe) and titanium (Ti) with the quartz and copper source of the initial mixture is discussed. SEM-EDX analysis revealed that cuprite (Cu₂O) was used as a copper source. In addition, micro-computed tomography (µCT) of the Egyptian Blue finds (Aguntum, Retznei, Wagna-Flavia Solva) was performed. Hence, revealing several concise differences between the samples. Texture and volumetric results show a distinctive difference in cuprorivaite content and particle size. To better analyse the spatial distribution, µCT-3D images of the individual mineral phases identified within each sample were obtained. The clear differences in the results may not only enable a differentiation of the production process but also show another potential of non-destructive µCT for assessment of archaeological findings. Full article

This review explores the applications of room temperature semiconductor detectors, with a focus on Cd(Zn)Te based detection systems, in non-destructive testing and evaluation (NDT&E). Cd(Zn)Te detectors, which operate efficiently at ambient temperatures, eliminate the need for cryogenic cooling systems and offer high energy and spatial resolution, making them ideal for a wide range of NDT&E applications. Key performance parameters such as energy resolution, spatial resolution, time resolution, detector efficiency, and form factor are discussed. The paper highlights the utilization of Cd(Zn)Te detectors in various imaging and spectroscopic applications, including nuclear threat detection and non-proliferation, archaeological NDT, and Unmanned Aerial Vehicle radiological surveying. Cd(Zn)Te detectors hold significant promise in NDT&E due to their high-resolution imaging, superior spectroscopic capabilities, versatility, and portability. Full article

In March 2022, an auction house in Zurich sold two female figurines made from mammoth ivory, along with other prehistoric artefacts. This is a rare occurrence because the scarcity and value of Paleolithic figurines have limited their presence in the international art market. Researchers from the Archaeological Museum Hamburg and the University of Tübingen subsequently undertook in situ and non-destructive investigations to illuminate the authenticity of the two figurines. We conducted a comprehensive analytical study that included detailed microscopic optical observations and spectroscopic investigations. This methodological approach, combined with a thorough comparison to contemporary ivory figurine replicas, proved effective and clearly demonstrated that the specimens were forgeries. Research efforts of this kind are crucial, as they significantly help reduce the spread of intentional fakes posing as genuine artefacts in the art market. By doing so, we foster collaboration between academic institutions and the art market to preserve and protect the integrity and value of authentic archaeological and cultural heritage. Full article

Charred and burned human and animal skeletal remains are frequently found in archaeological records and can also be subjects of forensic investigations. Heat exposure causes specific changes to the physical and chemical characteristics of these remains, offering valuable insights into their taphonomic history. This research combines the commonly used ATR-FTIR (Attenuated Total Reflectance–Fourier Transform Infrared) spectroscopy with the rarely utilised density measurements obtained from Multidetector CT (Computed Tomography) to investigate changes in defleshed bovine cortical bone exposed to different temperatures for varying durations. The inclusion of density measurements is significant because Multidetector CT analysis is non-destructive and can be valuable when remains cannot be removed from their burial context (e.g., urn) or cannot be damaged. The results indicate complex changes in both organic and inorganic components, affecting crystallinity and density. Lower temperatures primarily affect organic matter, while higher temperatures induce significant changes in the mineral lattice and phase transitions. The transformation from β-tricalcium phosphate to α-tricalcium phosphate at high temperatures likely impacts the bone’s crystallinity and density. Bone density measured by CT scans provided additional information that complemented the interpretations of FTIR spectroscopy. While CT scans offer important data for planning non-destructive analyses of remains, they present only one layer of information. Therefore, CT scans need to be combined with other techniques to provide comprehensive interpretations of the changes occurring in the bone. Further research is needed on density measurements and other potentially non-destructive analyses to fully unlock the potential of Multidetector CT analyses. Full article

Studies on emeralds from Habachtal (Austria) are scarce and non-exhaustive. However, they represent a significant interest to the community, as they have been assumed to be present in historical pieces of jewelry. Along with Egypt, Habachtal is suggested to be one of the main sources of gem-quality emeralds of archaeological significance. In this regard and due to their similar macroscopic look and geological context, it has always been challenging to distinguish Austrian and Egyptian emeralds set in historic jewelry. In this paper, a first comprehensive study of several Habchtal emeralds is presented based on a combination of classic gemology, chemistry and spectroscopy, using non-destructive to micro-destructive methods. Spectroscopic analyses, such as via Raman, FTIR and UV-Vis–NIR spectroscopies, showed that emeralds from Habachtal (Austria) contain Type II H₂O molecules with alkalis and they are colored by chromium and iron, similarly to emeralds from Egypt. Under an optical microscope (and identified by Raman spectroscopy), actinolite needle-like inclusions are frequently observed in Austrian emeralds. Other inclusions, such as quartz, plagioclase, albite, phlogopite and pyrite, can also be observed in Austrian samples. Chemical analysis of Austrian emeralds’ trace elements by LA–ICP–MS show similar results to those from Egypt, with the exception of V, K and Rb, which show a lesser content in Austrian emeralds. Thanks to the determination of inclusions combined with a careful examination of specific chemistry, this study shows that Austrian emeralds can be distinguished from their Egyptian counterpart. Full article

This work describes the effects of using neutron irradiation on cellulose and non-destructive methods to analyze linen fabrics of high heritage value. For this purpose, 8 samples were irradiated with increasing doses of neutrons and gamma rays up to 166 kGy of total dose. The samples were characterized by techniques such as ultraviolet luminescence, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, Raman spectroscopy, and the nuclear magnetic resonance (NMR) technique. The luminescence of linen fabrics in the ultraviolet range increases markedly with dosage. Some chemical changes were also perceived by the ATR-FTIR spectra in the linen samples. Similarly, the fluorescence background observed in Raman spectroscopy intensifies with dosage. Due to the heterogeneity of the textile cellulose, NMR offers limited applicability for detecting neutron doses in cultural heritage fabrics. Radiation is applied for preservation against microorganisms in cultural heritage objects where the damage is to be assessed. This radiation can occasionally be found after earthquakes or in volcanic archaeological sites, which could question its dating using carbon 14. Despite some limitations encountered due to working with commonly used linen fabrics, the techniques employed in this study have made it possible to observe trends between the responses obtained and the irradiation dose for each linen sample. Full article

Cultural assets are all movable and immovable assets that have been the subject of social life in historical periods, have unique scientific and cultural value, and are located above ground, underground or underwater. Today, the fact that most of the analyses conducted to understand the technologies of these assets require sampling and that non-destructive methods that allow analysis without taking samples are costly is a problem for cultural heritage workers. In this study, which was prepared to find solutions to national and international problems, it is aimed to develop a non-destructive, cost-minimizing and easy-to-use analysis method. Since this article aimed to develop methodology, the materials were prepared for preliminary research purposes. Therefore, it was limited to four primary colors. These four primary colors were red and yellow ochre, green earth, Egyptian blue and ultramarine blue. These pigments were used with different binders. The produced paints were photographed in natural and artificial light at different light intensities and brought to a 256 × 256 pixel size, and then trained on support vector machine, convolutional neural network, densely connected convolutional network, residual network 50 and visual geometry group 19 models. It was asked whether the trained VGG19 model could classify the paints used in archaeological and artistic works analyzed with instrumental methods in the literature with their real identities. As a result of the test, the model was able to classify paints in artworks from photographs non-destructively with a 99% success rate, similar to the result of the McNemar test. Full article

In this paper, some of the basic information on Ground-Penetrating Radar (GPR), its applications (especially in the field of civil engineering) and limitations are presented. As a non-destructive technique, GPR is a powerful tool for the investigation of structures and structural members, roads, geological layers, archaeological sites and many more. The technology is based on electromagnetic radiation in the UHF/VHF range (10 MHz to 3 GHz). The choice of the frequency depends on the intended use, depth and size of the target and medium where the target is located. Joined with other testing methods (ultrasound method, dynamic methods with forced or ambient vibrations, electrical conductivity testing, etc.), GPR can provide a deep insight into the investigated object. However, like many other non-destructive methods, the choice of input parameters may affect the results. In this regard, a case study presented in this paper demonstrates not only different applications of GPR in civil engineering but also the determination (calibration) of one of those input parameters: the dielectric constant of glued laminated timber. The challenge here was not only to investigate the influence of the direction of measurements with regards to the direction of the fibers but also to acknowledge the contribution of the test antenna used during testing and dielectric constant calibration. Full article

The historical and cultural significance of artistic works and archaeological artifacts underscores the imperative use of non-destructive testing methods in cultural heritage objects. Analyzing pigments in artwork poses a specific analytical challenge that demands a combination of various techniques to accurately determine chemical compositions. In this context, our work focused on the multi-analytical characterization of samples derived from fragments of a Roman-era Egyptian mummy named Kherima, dating back to around 200 AD. To identify the layers and elemental composition of the pigments used in the decoration, various techniques were employed: X-ray microfluorescence (µXRF), X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), high-resolution optical microscopy (OM), and X-ray computed microtomography (microCT). This multi-analytical approach facilitated the identification of the original pigments in the analyzed mummy fragments, along with insights into the materials used in the ground layer and the techniques applied in artifact manufacturing, indicating their accordance with the historical period and region to which they originally belonged. Full article

The newly constructed Bois d’Arc Lake Reservoir in Fannin County, Texas, USA, inevitably flooded a large ground surface area (67.34 km²) when the reservoir began impounding water in April 2021. Inside this (now) flooded area, land-based archaeological data recovery investigations discovered and documented several archaeological sites, now registered in the state of Texas; though, only two neighboring sites, namely, 41FN178 and 41FN244, are examined here. The first phase of archaeological testing at these sites included shovel testing, test unit excavations, and geoarchaeological trenching that yielded archaeological artifacts suggesting that Middle Caddo Indian peoples (AD 1200–1400) might have occupied this landscape. As the sites were recognized before the reservoir’s impoundment phase, this merited a non-invasive, non-destructive, high-resolution near-surface geophysical study to map strategic areas within sites 41FN178 and 41FN244 that might yield potential shallow targets of archaeological context. The adopted geophysical survey comprised 3D direct current electrical resistivity imaging (ERI) and land horizontal magnetic gradiometry (HMG), each mapping a total surface area of 2133 and 15,640 m², respectively. The combination of 3D ERI and land HMG surveys was instrumental in rapidly mapping the horizontal and vertical extent of shallowly buried anomalies within a large area prior to the completion of the dam and the beginning of water impoundment. Based on the geophysical insights, the outline of several Caddo houses with functional internal and external features (e.g., burnt cooking surfaces, storage pits, refuse pits, fired soil, ditches, a dump site, and a compound fence) are thought to exist within the uppermost 2 m of the Quaternary stratigraphy at both sites. At site 41FN244, 3D ERI found numerous resistive anomalies surrounding a conductive anomaly, collectively interpreted as a group of post-holes surrounding the remains of a Caddo house’s inner clay floor. It also found a cluster of several resistive anomalies interpreted as midden or middens. The HMG survey carried across areas from which archaeological test units also yielded positive findings, at sites 41FN178 and 41FN244, identified numerous scattered monopolar and dipolar anomalies interpreted as post-molds of Caddo houses, compound enclosures or fences, and adjacent middens. Archaeological excavations guided by the geophysical results yielded significant cultural material and post-mold features at site 244, which validate the geophysical interpretation in a preliminary context. Additionally, several dispersed magnetic anomalies are thought to be shallowly buried hearths, burn cooking surfaces, storage pits, and ditches. The mapped magnetic anomalies agree with the location and distribution of previously found archaeological artifacts and the extent of resistive and conductive resistivity anomalies. Follow-up archaeological excavations of these geophysical anomalies have preliminarily confirmed interpretations. Full article

Aerial and remote sensing archaeology are tools for identifying marks on images of archaeological remains covered by soil. In other words, they are archaeological prospection tools that fall into the category of non-destructive research methods. In this paper, a short review of these valuable research tools is carried out, presenting the way marks appear, and also the categories of aerial and remote sensing archaeology, depending on the medium of storage of images and the type of platform of transfer of sensors. The timing of the emergence of each category is determined and examples of relevant surveys are presented. Focusing on the use of an Unmanned Aircraft System (UAS) with a multispectral sensor (aerial remote sensing archaeology), their partial utilization is revealed for collecting images in areas outside of the visible spectrum, aiming at the identification of covered archaeological remains. To this end, examples of the use of UAS with different sensors are presented and indexes that have been used so far in respective applications are gathered. Aerial remote sensing archaeology took place in two areas of particular interest in Northern Greece. UAS WingtraOne GEN II was used to collect multispectral images. In both study areas, soil and vegetation or crop marks were detected, possibly covered archaeological remains, initially in RGB orthophotomosaics and then more clearly in the index maps, such as the normalized difference vegetation index, simple ratio, brightness index, second brightness index, and anthocyanin reflectance index 2b. Full article

Geophysics is a fundamental tool to detect buried structures of archaeological interest through non-destructive techniques. The Messapian city walls in Ugento (Puglia, southern Italy) are of great archaeological importance, and some sections are still visible. In order to locate a stretch of the city walls, geophysical prospections were performed using the low-frequency electromagnetic method and ground-penetrating radar. The surveys were carried out in a peripheral area of Ugento, near a visible section of the city walls. The analysis and interpretation of the measured data revealed clear anomalies that could be ascribed to the city walls that aligned with an adjacent section of the visible walls. Archaeological excavation campaigns found a part of the walls and some important elements, as identified by the geophysical data interpretation. Full article