Search Results (271)

Microbial fuel cells (MFCs) are bio-electrochemical systems that harness microorganisms to convert organic pollutants in wastewater directly into electricity, offering a dual solution for sustainable wastewater treatment and renewable energy generation. This paper presents a holistic techno-economic and environmental feasibility assessment of large-scale MFC deployment in Dhaka’s industrial zone, Bangladesh, as a relevant case study. Here, treating 100,000 cubic meters of wastewater daily would require a capital investment of approximately USD 500 million, with a total project cost ranging between USD 307.38 million and 1.711 billion, depending on system configurations. This setup has an estimated theoretical energy recovery of 478.4 MWh/day and a realistic output of 382 MWh/day, translating to a per-unit energy cost of USD 0.2–1/kWh. MFCs show great potential for treating wastewater and addressing energy challenges. However, this paper explores remaining challenges, including high capital costs, electrode and membrane inefficiencies, and scalability issues. Full article

This study focuses on electrical stimulation for composting. Using the PSALSAR method, a comprehensive systematic review analysis identified 22 relevant articles. The examined studies fall into four main systems: electric field-assisted aerobic composting (EAAC), electrolytic oxygen aerobic composting (EOAC), microbial fuel cells (MFCs), and thermoelectric generators (TEGs). Apart from the main systems highlighted above, bioelectrochemically assisted anaerobic composting (AnC_{BE, III}) is discussed as an underexplored system with the potential to improve the efficiency of anaerobic degradation. Each system is described in terms of key materials, composter design, operating conditions, temperature evolution, compost maturity, microbial community, and environmental outcomes. EAAC and EOAC systems accelerate organic matter decomposition by improving oxygen distribution and microbial activity, whereas MFC and TEG systems have dual functioning due to the energy generated alongside waste degradation. These innovative systems not only significantly improve composting efficiency by speeding up organic matter breakdown and increasing oxygen supply but also support sustainable waste management by reducing greenhouse gas emissions and generating bioelectricity or heat. Together, these systems overcome the drawbacks of conventional composting systems and promote future environmental sustainability solutions. Full article

This study systematically compares the environmental and economic performance of three wastewater treatment systems: constructed wetlands (CWs), microbial fuel cells (MFCs), and their integration (CW–MFC). Lab-scale units of each system were constructed using a multi-media matrix (gravel, zeolite, and granular activated carbon), composite native wetland species (Juncus effusus, Iris sp., and Typha angustifolia), carbon-based electrodes (graphite), and standard inoculum for CW and CW–MFC. The MFC system employed carbon-based electrodes and proton-exchange membrane. The experimental design included a parallel operation of all systems treating domestic wastewater under identical hydraulic and organic loading rates. Environmental impacts were quantified across construction and operational phases using life cycle assessment (LCA) with GaBi software 9.2, employing TRACI 2021 and ReCiPe 2016 methods, while techno-economic analysis (TEA) evaluated capital and operational costs. The key results indicate that CW demonstrates the lowest global warming potential (142.26 kg CO₂-eq) due to its reliance on natural biological processes. The integrated CW–MFC system achieved enhanced pollutant removal (82.8%, 87.13%, 78.13%, and 90.3% for COD, NO₃, TN, and TP) and bioenergy generation of 2.68 kWh, balancing environmental benefits with superior treatment efficiency. In contrast, the stand-alone MFC shows higher environmental burdens, primarily due to energy-intensive material requirements and fabrication processes. TEA results highlight CW as the most cost-effective solution (USD 627/m³), with CW–MFC emerging as a competitive alternative when considering environmental benefits and operational efficiencies (USD 718/m³). This study highlights the potential of hybrid systems, such as CW–MFC, to advance sustainable wastewater treatment technologies by minimizing environmental impacts and enhancing resource recovery, supporting their broader adoption in future water management strategies. Future research should focus on optimizing materials and energy use to improve scalability and feasibility. Full article

Microbial Electrochemistry Technology (MET) leverages the unique process of extracellular electron transfer (EET) between electroactive bacteria (EAB) and electrodes to enable various applications, such as electricity generation, bioremediation, and wastewater treatment. This review highlights significant advancements in EET mechanisms, emphasizing both outward and inward electron transfer pathways mediated by diverse electroactive microorganisms. Notably, the role of electron shuttles, genetic modifications, and innovative electrode materials are discussed as strategies to enhance EET efficiency. Recent studies illustrate the importance of redox-active molecules, such as flavins and metal nanoparticles, in facilitating electron transfer, while genetic engineering has proven effective in optimizing microbial physiology to boost EET rates. The review also examines the impact of electrode materials on microbial attachment and performance, showcasing new composites and nanostructures that enhance power output in microbial fuel cells. By synthesizing the recent findings and proposing emerging research directions, this work provides an overview of EET enhancement strategies, aiming to inform future technological innovations in bioelectrochemical systems (BESs). Full article

Microbial Fuel Cell (MFC) is a novel bioelectrochemical system that catalyzes the oxidation of chemical energy in organic waste and converts it directly into electrical energy through the attachment and growth of electroactive microorganisms on the electrode surface. This technology realizes the synergistic effect of waste treatment and renewable energy production. A CF-NiO-PANI capacitor composite anode was prepared by loading polyaniline on a CF-NiO electrode to improve the capacitance of a CF electrode. The electrochemical characteristics of the composite anode were evaluated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), and the electrode materials were analyzed comprehensively by scanning electron microscopy (SEM), energy diffusion spectrometer (EDS), and Fourier transform infrared spectroscopy (FTIR). MFC system based on CF-NiO-PANI composite anode showed excellent energy conversion efficiency in potato starch wastewater treatment, and its maximum power density increased to 0.4 W/m³, which was 300% higher than that of the traditional CF anode. In the standard charge–discharge test (C1000/D1000), the charge storage capacity of the composite anode reached 2607.06 C/m², which was higher than that of the CF anode (348.77 C/m²). Microbial community analysis revealed that the CF-NiO-PANI anode surface formed a highly efficient electroactive biofilm dominated by electrogenic bacteria (accounting for 47.01%), confirming its excellent electron transfer ability. The development of this innovative capacitance-catalytic dual-function anode material provides a new technical path for the synergistic optimization of wastewater treatment and energy recovery in MFC systems. Full article

Microbial decomposition of persistent natural compounds such as phenolic lignin and polysaccharides in plant cell walls plays a crucial role in the global carbon cycle and underpins diverse biotechnological applications. Among microbial decomposers, fungi from the Ascomycota and Basidiomycota phyla have evolved specialized mechanisms for efficient lignocellulosic biomass degradation, employing extracellular enzymes and synergistic fungal consortia. Fungal coculture, defined as the controlled, axenic cultivation of multiple fungal species or strains in a single culture medium, is a promising strategy for industrial processes. This approach to biomass conversion offers potential for enhancing production of enzymes, biofuels, and other high-value bioproducts, while enabling investigation of ecological dynamics and metabolic pathways relevant to biorefinery operations. Lignocellulosic biomass conversion into fuels, energy, and biochemicals is central to the bioeconomy, integrating advanced biotechnology with sustainable resource use. Recent advancements in -omics technologies, including genomics, transcriptomics, and proteomics, have facilitated detailed analysis of fungal metabolism, uncovering novel secondary metabolites and enzymatic pathways activated under specific growth conditions. This review highlights the potential of fungal coculture systems to advance sustainable biomass conversion in alignment with circular bioeconomy goals. Full article

Microbial electrochemical technologies (METs), such as microbial fuel cells (MFCs) and microbial electrolysis cells (MECs), show promise for sustainable energy generation from biomass waste and wastewater. However, further work is necessary for their practical use. In particular, it has been argued that process performances, such as those for organics removal and energy generation, should be substantially improved to catch up with those of existing processes, such as anaerobic digesters. Recent work has reported that bioaugmentation (BA) with electroactive microbes (EAMs) can significantly improve the performance of MFCs and MECs, while previous reports have also documented BA cases with limited impacts. In this article, after summarizing EAMs that have been isolated and characterized as possible BA agents, we comparatively analyze past BA trials for MET processes. Based on the information thus obtained, key factors that should be considered for successful BA are suggested. Full article

Plastic pollution remains a critical global environmental challenge, with conventional disposal methods contributing to ecosystem degradation. Simultaneously, energy scarcity affects numerous rural communities, limiting development opportunities. This study presents an innovative approach that integrates microbial fuel cells (MFCs) with Klebsiella oxytoca to simultaneously degrade plastic waste and generate bioelectricity. The monitoring results over 40 days revealed optimal performance on day 28, with a peak voltage of 0.714 ± 0.026 V and an electric current of 3.149 ± 0.124 mA. The biocatalyst exhibited an electrical conductivity of 140.466 ± 5.180 mS/cm and an oxidation-reduction potential of 109.519 ± 5.35 mV, indicating efficient electron transfer. Furthermore, the MFCs achieved a maximum power density of 11.391 ± 0.814 mW/cm² with a current density of 5.106 mA/cm², demonstrating their potential for sustainable energy production. Fourier transform infrared (FTIR) analysis confirmed structural modifications in the plastic, with decreased vibrational peaks indicative of polymer degradation. Additionally, scanning electron microscopy (SEM) micrographs revealed porosity and surface cracks, highlighting Klebsiella oxytoca’s biodegradation capacity. These findings establish the viability of bioelectrochemical systems for simultaneous waste remediation and renewable energy generation, paving the way for scalable applications in environmental biotechnology. By coupling microbial degradation with electricity production, this research supports the development of sustainable solutions aligned with the principles of circular economy and climate change mitigation. Full article

Inflammation is a crucial component of the immune response essential for host defense and tissue repair. However, when the immune response becomes dysregulated, it can contribute to the pathogenesis of chronic diseases. While acute inflammation is a short-lived, protective response, chronic inflammation is sustained over time and can lead to immune dysfunction, tissue damage, and disease progression. The chronic inflammation theory of disease suggests that persistent immune activation/inflammation underlies both infectious and non-infectious conditions and serves as a unifying mechanism across distinct pathological states. In this review article, we argue that human immunodeficiency virus (HIV) infection represents a prime model for studying chronic inflammation, and that despite effective viral suppression with antiretroviral therapy (ART), people living with HIV (PLWH) exhibit persistent immune activation, systemic inflammation, and an increased risk of cardiovascular, metabolic, and neurodegenerative diseases. Here, the interplay between microbial translocation, immune dysregulation, and metabolic reprogramming fuels a state of chronic inflammation that accelerates disease progression beyond HIV itself. Key factors such as T-cell exhaustion, persistent monocyte/macrophage activation, and immunometabolic dysfunction contribute to such a sustained inflammatory state. This review explores the molecular and cellular mechanisms driving chronic inflammation in HIV infection with a focus on immunometabolism and its implications for broader inflammatory diseases. By understanding such pathways, we can identify novel therapeutic targets to mitigate inflammation-driven disease progression not only in HIV but across a spectrum of chronic inflammatory conditions. Full article

The xeno-fungusphere, a novel microbial ecosystem formed by integrating exogenous fungi, indigenous soil microbiota, and electroactive microorganisms within microbial fuel cells (MFCs), offers a transformative approach for agricultural remediation and medicinal plant conservation. By leveraging fungal enzymatic versatility (e.g., laccases, cytochrome P450s) and conductive hyphae, this system achieves dual benefits. First, it enables efficient degradation of recalcitrant agrochemicals, such as haloxyfop-P, with a removal efficiency of 97.9% (vs. 72.4% by fungi alone) and a 27.6% reduction in activation energy. This is driven by a bioelectric field (0.2–0.5 V/cm), which enhances enzymatic activity and accelerates electron transfer. Second, it generates bioelectricity, up to 9.3 μW/cm², demonstrating real-world applicability. In medicinal plant soils, xeno-fungusphere MFCs restore soil health by stabilizing the pH, enriching dehydrogenase activity, and promoting nutrient cycling, thereby mitigating agrochemical-induced inhibition of secondary metabolite synthesis (e.g., ginsenosides, taxol). Field trials show 97.9% herbicide removal in 60 days, outperforming conventional methods. Innovations, such as adaptive electrodes, engineered strains, and phytoremediation-integrated systems, have been used to address soil and fungal limitations. This technology bridges sustainable agriculture and bioenergy recovery, offering the dual benefits of soil detoxification and enhanced crop quality. Future IoT-enabled monitoring and circular economy integration promise scalable, precision-based applications for global agroecological resilience. Full article

Sludge-derived biochar (SDB) synthesized by the pyrolysis of sludge is gaining enormous interest as a sustainable solution to wastewater treatment and sludge disposal. Despite the proliferation of general biochar reviews, a focused synthesis on SDB-specific advances, particularly covering the recent surge in multifunctional wastewater treatment applications (2020–2025), receives little emphasis. In particular, a critical analysis of recent trends, application challenges, and future research directions for SDB is still limited. Unlike broader biochar reviews, this mini-review highlights the comparative advantages and limitations of SDB, identifies emerging integration strategies (e.g., bio-electrochemical systems, catalytic membranes), and outlines future research priorities toward enhancing the durability and environmental safety of SDB applications. Specifically, this review summarized the advances from 2020 to 2025, focusing exclusively on functional modifications, and practical applications of SDB across diverse wastewater treatment technologies involved in adsorption, catalytic oxidation, membrane integration, electrochemical processes and bio-treatment systems. Quantitative comparisons of adsorption capacities (e.g., >99% Cd2+ removal, >150 mg/g tetracycline adsorption) and catalytic degradation efficiencies are provided to illustrate recent improvements. The potential of SDB in evaluating traditional and emerging contaminant degradation among the Fenton-like, persulfate, and peracetic acid activation systems was emphasized. Integration with membrane technologies reduces fouling, while electrochemical applications, including microbial fuel cells, yield higher power densities. To improve the functionality of SDB-based systems in targeting contamination removal, modification strategies, i.e., thermal activation, heteroatom doping (N, S, P), and metal loading, played crucial roles. Emerging trends highlight hybrid systems and persistent free radicals for non-radical pathways. Despite progress, critical challenges persist in scalability, long-term stability, lifecycle assessments, and scale-up implementation. The targeted synthesis of this review offers valuable insights to guide the development and practical deployment of SDB in sustainable wastewater management. Full article

Volatile organic compounds (VOC) are major contributors to the burgeoning air pollution issue, predominantly from industrial areas, with well-documented environmental and health risks, which demand efficient and sustainable control policies. This review analyzes the current technological challenges and investigates recent developments in biological treatment technologies for VOC-contaminated off-gases, including biofilters, biotrickling filters, and bioscrubber, as well as emerging technologies, such as bioaugmentation and microbial fuel cells (MFCs). Operational performance, economic feasibility, and adaptability to various industrial applications are assessed, alongside opportunities for integration with other technologies, including energy recovery technologies. Biological systems offer considerable advantages regarding cost savings and lower environmental impacts and enhanced operational flexibility, particularly when combined with innovative materials and microbial optimization techniques. Nevertheless, challenges persist, such as choosing the best treatment settings suited to different VOC streams and addressing biofilm control concerns and scalability. Overall, biological VOC treatments are encouraging sustainable solutions, though continued research into reactor design, microbial dynamics, and MFC-based energetic valorization is essential for broader industrial application. These insights cover advancements and highlight the continuous need for innovative prowess to forge sustainable VOC pollution control. Full article

A novel three-dimensional porous biocarbon electrode with exceptional biocompatibility was synthesized via a facile approach using pumpkin as the precursor. The obtained pumpkin-derived biocarbon features a highly porous architecture and serves as an efficient biocarbon electrode (denoted as PBE) in a microbial fuel cell (MFC). This PBE could form robust biofilms to facilitate the adhesion of electroactive bacteria. When used in the treatment of real wastewater, the assembled PBE-MFC achieves a remarkable power density of 231 mW/m², much higher than the control (carbon brush—MFC, 164 mW/m²) under the identical conditions. This result may be attributed to the upregulation of flagellar assembly pathways and bacterial secretion systems in the electroactive bacteria (e.g., Hydrogenophaga, Desulfovibrio, Thiobacillus, Rhodanobacter) at the anode of the PBE-MFC. The increased abundance of nitrifying bacteria (e.g., Hyphomicrobium, Sulfurimonas, Aequorivita) and organic matter-degrading bacteria (e.g., Lysobacter) in the PBE-MFC also contributed to its exceptional wastewater treatment efficiency. With its outstanding biocompatibility, cost-effectiveness, environmental sustainability, and ease of fabrication, the PBE-MFC displays great potential for application in the field of high-performance and economic wastewater treatment. Full article

The extensive use of antibiotics as essential medications in contemporary healthcare has resulted in significant amounts of these drugs entering the environment, both in original and metabolic forms, which presents serious ecological and health hazards. This paper examines the natural processes that break down antibiotics in water, including photolysis, hydrolysis, and biodegradation. It also discusses advancements in artificial degradation technologies, such as advanced oxidation processes (AOPs), physicochemical methods, ionizing radiation degradation, artificial wetland technology, microalgae technology, microbial electrochemical systems, and innovative catalysts. While current technologies demonstrate promising potential for use, they encounter challenges related to the catalyst stability, cost, and ecological safety. Future research should focus on optimizing degradation methods and creating efficient, sustainable multi-technology systems, such as the photocatalysis–membrane filtration coupling system; the ultrasound–Fenton–artificial wetland synergistic system; the electrochemical–biodegradation combined system; and the microbial fuel cell (MFC)–photocatalysis synergistic system, to tackle the complexities of antibiotic pollution in the environment. Full article

Palm oil mill effluent (POME), a byproduct of palm oil processing, has substantial resource recovery potential. Its rich biodegradable content supports methane (CH₄) production via anaerobic digestion, enabling renewable energy generation. Additionally, the significant water content of POME can be reclaimed for use in boiler feed, irrigation, and drinking water. However, selecting appropriate technologies to recover valuable resources from POME is challenging, particularly for the purification and upgrading of biogas. Membrane technologies offer an effective approach for transforming POME treatment from an energy-intensive process into a resource recovery system, supporting the decarbonization of palm oil production and advancing global sustainability objectives. This technique is cost-effective and ecofriendly for biogas purification and water reclamation. For biogas purification and upgrading, membrane systems offer the lowest capital and operational costs at 5.654 USD/m³, compared to other technologies, such as 6.249 USD/m³ for water scrubbers and 6.999 USD/m³ for chemical absorbers. This review primarily explores the potential of membranes for gas purification from POME and examines their integration with other processes to develop advanced systems, such as ultrasonicated membrane anaerobic systems and membrane anaerobic systems, to enhance biogas production. In addition, water reclamation from POME is discussed, with ultrafiltration membranes emerging as the most promising candidates. Proton exchange membranes, such as Nafion, are used extensively in microbial fuel cells to improve electricity generation, and this is also summarized. Finally, challenges and future perspectives are highlighted, emphasizing the broader potential of membrane technology in POME wastewater resource recovery. Full article