Search Results (424)

During production, fish are exposed to multiple environmental, physiological, and physical stressors, which compromise development, productivity, and welfare and urge the implementation of effective and safe stress-mitigating strategies, particularly during early developmental stages. Larval zebrafish (Danio rerio) constitute a powerful model for studying acute stress responses due to the numerous advantages they offer, such as developmental transparency, a conserved hypothalamic–pituitary–interrenal (HPI) axis, and suitability for high-throughput screening. This review examines the potential of natural monoterpenes as stress-reducing compounds and compares their performance with conventional synthetic anesthetics. Evidence from vortex-flow stress paradigms, behavioral profiling and biochemical assays shows that acute stress in zebrafish larvae triggers metabolic disruption, behavioral hyperactivity and enzyme imbalance, with cortisol responses depending on stimulus intensity. Monoterpenes such as thymol and menthol consistently reduce stress-induced hyperactivity, support redox homeostasis and display favorable safety profiles at low doses and short exposures. Nevertheless, as research into these substances is still recent, evidence of any potential adverse effects is still limited. Although individual monoterpenes may act on different subsets of molecular targets, their multimodal mechanisms, including gamma-aminobutyric acid (GABA)ergic enhancement, voltage-gated ion channel and transient receptor potential (TRP) modulation, suggest broader and potentially safer actions compared to single-target anesthetics as tricaine methane sulfonate (MS-222). Collectively, these findings suggest that monoterpenes offer promising natural alternatives for stress mitigation in aquaculture and the refinement of research procedures involving early life stages. Full article

This paper describes a simple and sensitive method for determining the content of five bisphenols at the µg L⁻¹ level in tea infusion samples. The procedure uses a polypropylene hollow fiber filled with a deep eutectic solvent as the acceptor phase and 1-octanol as the supported liquid membrane, and the optimal conditions for the three-phase stir bar microextraction method were established as follows: a menthol–octanoic acid mixture (1:1 molar ratio) as the hollow-fiber filling, an extraction time of 1 h, and 80 µL of methanol for analyte desorption. The method demonstrated good linearity over the ranges of 1.5–30.0 µg L⁻¹ (BPF, BPA, BPAF, and BADGE) and 6.0–120.0 µg L⁻¹ (BPZ), with limits of detection between 0.28 and 1.01 µg L⁻¹, and the relative recovery values were satisfactory (99–120%) with acceptable precision (RSD < 17%). Thus, the method was successfully applied to quantitatively analyze twenty commercial tea infusions, in which BPF was detected at concentrations above the LOQ, and the greenness and overall applicability of the approach were confirmed using the AGREEprep and BAGI assessment tools. Full article

Three-dimensional (3D) printing has emerged as a versatile platform in pharmaceutical sciences, enabling fabrication of personalized dosage forms with controlled drug release and tailored properties using printable hydrogel bioinks. This study aimed to develop mucoadhesive hydrogel buccal films for cannabinoid delivery using extrusion-based 3D bioprinting. The films incorporated cannabidiol (CBD) and tetrahydrocannabinol (THC) as cyclodextrin inclusion complexes with HPMC or Carbopol as mucoadhesive hydrogel-forming polymers, while terpenes were evaluated as permeation enhancers. Terpenes including 1,8-cineole, d-limonene, α-pinene, and L-menthol were investigated individually and in combinations to assess their ability to enhance buccal cannabinoid permeation. Hydrogel bioinks were prepared and characterized for viscosity, pH, and drug content prior to printing under optimized conditions. The printed films were evaluated for mechanical properties, swelling behaviour, mucoadhesion, in vitro drug release, and ex vivo buccal mucosal penetration. Ex vivo penetration studies demonstrated that combinations of natural terpenes significantly improved CBD penetration compared with individual terpenes and the synthetic enhancer Azone. HPMC-based hydrogel films exhibited superior mechanical strength, cohesive gel matrices, and sustained non-Fickian cannabinoid release, while enhancing transmucosal penetration compared with unformulated drugs. Carbopol-based films showed higher mucoadhesion but weaker mechanical properties and faster erosion-driven release. These findings demonstrate the potential of 3D-printed mucoadhesive hydrogel films as gel-based systems for transmucosal cannabinoid delivery. Full article

Background: Menthol is a naturally occurring volatile terpene alcohol, widely used in food, pharmaceutical, and tobacco products; however, its high volatility leads to significant flavor loss during storage and handling. Methods: Herein, bimodal mesoporous silica materials (BMMs) were employed as carriers to encapsulate menthol, the loading and release behaviors were systematically compared using normal-temperature and alcohol-thermal loading methods. Results: Comprehensive characterizations (XRD and SAXS patterns, FT-IR spectra, SEM images, and N₂-sorption isotherms) confirmed that menthol incorporation did not disrupt the hierarchical mesoporous channels of BMMs. The alcohol-thermal loading method achieved a superior menthol loading capacity of 87%, significantly outperforming the normal-temperature loading (58%). Release performances revealed a transition in the dominant release mechanism, from diffusion-controlled behavior at low loading levels to concentration gradient-driven desorption at high loadings. Molecular dynamics simulations further demonstrated that alcohol-thermal loading enabled faster molecular diffusion and a more uniform distribution of menthol within the mesopores due to weaker interfacial interactions, whereas normal-temperature loading induced localized multilayer adsorption, resulting in mesopore blockage and hindered diffusion. In addition, long-term atmospheric release tests assessed sustained menthol retention over 30 days. Conclusions: Overall, this work establishes alcohol-thermal loading as an effective approach for regulating adsorption and release in mesoporous carriers, providing a foundation for developing volatile compound encapsulation strategies. Full article

In this study, a microcrystalline cellulose (MCC)-stabilized Pickering emulsion approach was developed to integrate hydrophobic natural deep eutectic solvents (NADES; menthol:decanoic acid, 1:1 molar ratio) into agar-based biopolymer films. MCC was evaluated not only as a filler but also as a functional interfacial component governing hydrophobic phase distribution and structural organization. SEM analysis showed that MCC concentration significantly influenced morphology; films with 0.2% MCC exhibited a more homogeneous structure, whereas 0.5% MCC led to heterogeneous and irregular formations. Mechanically, films with 0.2% MCC showed higher elongation at break (16.37%) compared to 0.5% MCC (9.86%), while tensile strength remained similar (2.75–2.78 MPa). Increased MCC content enhanced surface hydrophobicity, as indicated by higher contact angle values. The 0.5% MCC films exhibited high moisture content (85%) and water solubility (93%), attributed to increased free volume and structural irregularity. Swelling index exceeded 40% in 0.2% MCC films but decreased at higher MCC levels. HS-GC-MS analysis revealed temperature-dependent controlled release of menthol, with significant release at 50 °C compared to 25 °C. Antimicrobial tests demonstrated broad-spectrum activity (8.9–24.2 mm). These results highlight MCC as an effective stabilizer for hydrophobic NADES integration and support the potential of these films for active packaging applications. Full article

Background: Shikonins are natural naphthoquinones that exhibit a range of biological activities. They are typically extracted using nonpolar solvents; however, green extraction approaches remain underexplored. Methods: Phytochemical profiling of E. vulgare root extracts was performed using HPLC-ESI-QTOF-MS/MS and quantitative analysis using HPLC-PDA. Shikonin extraction was performed using VNADESs based on thymol, camphor, menthol and benzyl alcohol. The feasibility of removing the VNADES from the extracts via freeze-drying was assessed. The cytotoxic, antioxidant, anti-inflammatory and antimicrobial activities of the hexane extract and the selected VNADES-based extract (TBa 2:8) were compared. Results: Eight shikonin derivatives were identified in the extracts. VNADES extracts contained comparable amounts of shikonin to hexane extracts; however, freeze-drying resulted in significant shikonin content loss. TBa 2:8 extract exhibited noticeably lower cytotoxicity than the hexane extract while its antioxidant potential depended on the assay applied. In contrast to the hexane extract, TBa 2:8 demonstrated the ability to reduce intracellular ROS and NO levels. However, the hexane extract exhibited stronger antimicrobial activity. Conclusions: VNADES systems enable efficient extraction of shikonin derivatives with performance comparable to hexane. Although the resulting extracts exhibit multidirectional biological activity, it remains challenging to remove the VNADESs effectively without losing the shikonins. Full article

This study evaluated the use of HDES for omega-3 recovery from by-products of Octopus maya, an endemic species of the Yucatán Peninsula, Mexico. A 2 × 3 × 2 factorial design was applied to assess the effect of: (1) the hydrogen bond acceptor (HBA, menthol or eucalyptol) of hydrophobic deep eutectic solvents (HDES) with oleic acid as the hydrogen bond donor; (2) the molar ratio (MR) (1:1, 1:2, or 2:1); and (3) ultrasound-assisted extraction time (ET) (30 or 60 min) in omega-3 equivalents (EO3, mg/mL), determined by UV–Vis spectrophotometry and viscosity characterization to the Octopus maya extracted samples (n = 2), reported as $\overline{x}$ ± SD. The effects of the factors studied were analyzed by a DOE methodology with Minitab^® (version 18). Samples with the highest omega-3 were selected and their composition was confirmed by FTIR, Raman spectroscopy and gas chromatography. Eucalyptol at a molar ratio of 1:2 and an extraction time of 30 min yielded the highest OE3 (0.70 mg/mL). The statistical analysis revealed that the extraction of omega-3 determined by UV–Vis spectrophotometry was significantly influenced by the triple interaction of HBA × MR × ET (p < 0.05), indicating that extraction performance depends on the combined effect of solvent composition and processing conditions. All extracts showed Newtonian behavior with viscosities between 0.011 and 0.036 Pa·s, with eucalyptol formulations presenting the lowest values (0.011–0.023 Pa·s). Fatty acid profile allowed to quantify C16:0; C18:0; C18:1 n-9; C18:2 n-6; and C18:3 n-3, palmitic, stearic, oleic, linoleic and linolenic fatty acids, respectively, showing greater affinity for polyunsaturated fatty acids, mainly omega-6 (23.45–27.91%), and lower affinity for saturated fatty acids such as palmitic and stearic acids, indicating HDES as a sustainable alternative for selective extractions. Full article

In this study, new types of eutectic solvents (ESs) are tested for their ability to remove the eight most common bisphenols (BPA, BPB, BPC, BPE, BPF, BPG, BPS, BPAP), which are environmentally monitored substances, from aqueous matrices. A total of 18 ESs based on hydrophobic organic acids, such as capric, caprylic, lauric, and myristic acids, and terpenes, such as DL-menthol, terpineol, linalool, and geraniol, are prepared and mixed in various molar ratios. The highest extraction yield for all types of BPs is achieved with a binary mixture of geraniol:caprylic acid prepared in a molar ratio of 1:1. This ES can be used repeatedly for five consecutive cycles achieving almost 100% recovery for BPB, BPC, BPG, and BPAP, while for BPA, BPE, and BPF, the yield drops to 97% and for BPS to 90%. The efficiency of ES extraction is verified using HPLC-MS/MS to determine the BPs in the aqueous phase. This is performed at a pentafluorophenylpropyl stationary phase with LOQs ranging from 0.24 to 29.1 ng/mL. The applicability of this HPLC-MS/MS method was demonstrated by monitoring the occurrence of BPs in thermal paper and other industrial samples. Full article

Fusarium oxysporum f. sp. lycopersici (FOL) is one of the most destructive soil-borne pathogens affecting tomato production worldwide, causing substantial yield losses and persisting in soil for extended periods. The increasing regulatory restrictions on chemical fungicides and the emergence of resistant pathogen strains have intensified the search for sustainable and environmentally friendly alternatives. This systematic review synthesizes studies published between 2000 and 2025 that evaluated the antifungal efficacy of essential oils (EOs), their bioactive constituents, and EO-based nanoformulations against FOL in tomato. A total of 40 studies were included, following the PRISMA 2020 guidelines, encompassing in vitro, greenhouse, and limited field evaluations. Many EOs rich in phenolic compounds and oxygenated monoterpenes, such as thymol, carvacrol, eugenol, citral, and menthol, consistently inhibited FOL growth and spore germination, with reported mycelial growth inhibition ranging from 60 to 100% and minimum inhibitory concentrations (MICs) between 0.05 and 1.5 µL ml⁻¹. However, the use of EOs is often limited because they evaporate quickly, do not mix well with water, can harm plants, and do not persist under field conditions. Nano-delivery systems, including nanoemulsions, polymeric nanoparticles, chitosan-based carriers, and lipid-based nanostructures, have been shown to enhance the stability, bioavailability, and antifungal efficacy of EOs. This has led to improved disease management and reduced pesticide application rates. In addition, several EO-based treatments have been reported to activate plant defense responses, including the induction of defense-related genes, antioxidant enzymes, and epigenetic modifications. Overall, EO-based nanoformulations show promise as next-generation biopesticides for the sustainable management of tomato Fusarium wilt. Nevertheless, large-scale field validation, standardized formulation protocols, and regulatory assessments are required before these technologies can be widely implemented in agriculture. Full article

Hydrophobic eutectic solvent systems (ESSs) were prepared and characterized using temperature-dependent thermophysical and transport property measurements, supported by thermal analysis. The investigated systems comprise terpene-based mixtures, menthol:octanoic acid (1:2) and menthol:decanoic acid (1:1), and thymol-based mixtures, thymol:butanol (1:1), thymol:hexanol (1:1), thymol:octanoic acid (1:1), and thymol:oleic acid (1:1), as well as salt-containing ESSs based on tetrabutylphosphonium bromide (TBPBr), TBPBr:octanoic acid (1:1), and TBPBr:lauric acid (1:1). Density, dynamic viscosity, and electrical conductivity were measured at atmospheric pressure (p = 0.1 MPa) over 293.15–313.15 K. From density data, molar volumes and isobaric thermal expansion coefficients were calculated. The temperature dependence of viscosity was correlated with both Arrhenius and Vogel–Fulcher–Tammann equations. Conductivity results were used to compute molar conductivities, and the coupled conductivity–viscosity behavior was assessed via Walden analysis to quantify deviations from ideal electrolyte behavior and estimate ionicity. Thermal behavior and stability were evaluated by differential scanning calorimetry (DSC) and simultaneous thermogravimetric analysis (TG/DSC). The resulting dataset enables a consistent comparison of volumetric, flow, and ion transport descriptors across fully molecular terpene-based mixtures and TBPBr-containing systems. Overall, the combined transport descriptors, including Walden analysis, provide a practical framework for distinguishing molecular from salt-containing hydrophobic ESS families and support formulation selection for temperature-dependent applications, particularly in biphasic extraction processes. Full article

Volatile amphiphiles and surfactant mixtures have gained wide applications in diverse areas of industry, cosmetics, and medicine. The surface tension isotherms, measured at different solute ratios, and data processing, using appropriate theoretical models, provide quantitative information on their bulk and interfacial properties. Here, this approach is applied for mixtures of volatile amphiphile (benzyl acetate, linalool, geraniol, menthol, citronellol) and sodium dodecyl sulfate (SDS). All surface tension isotherms are described by the van der Waals model for a two-component adsorption layer, taking into account the counterion binding in the Stern layer, by varying only one adjustable parameter (interfacial pair interaction energy between adsorbed molecules). Knowing the parameters of the model, we computed various properties of the adsorption layers (adsorptions of different components, occupancy of the Stern layer, and interfacial electrostatic potential). The experimental aqueous solubilities of mixtures are fitted using the regular solution theory to obtain the pair bulk interaction parameter. The mixing of SDS and: (i) benzyl acetate and citronellol is antagonistic; (ii) linalool and geraniol is synergistic; and (iii) menthol is ideal. The reported properties of the volatile amphiphiles and SDS mixtures could be of interest for increasing the range of their applicability in practice. Full article

Candida parapsilosis is a major cause of healthcare-associated infections due to its persistence on abiotic surfaces and efficient transmission via healthcare workers’ hands. This study evaluated the antifungal efficacy and safety of clinically relevant antiseptics against 60 C. parapsilosis clinical isolates using a surface carrier test designed to simulate contamination and disinfection events on hospital surfaces. Antifungal activity was assessed by logarithmic reduction (log₁₀) assays on surface carriers and by minimum inhibitory concentration (MIC) testing. Potential synergistic interactions between antiseptics and selected phytochemicals were investigated using checkerboard assays, and toxicity was evaluated in vivo using Caenorhabditis elegans. Surface carrier assays showed that 70% ethanol and 0.5% alcoholic chlorhexidine (CHG) achieved the highest fungicidal activity, with reductions of up to 5 log₁₀ after 1 min exposure at 25 °C. Polyhexamethylene guanidine hydrochloride (PHMGH) displayed consistently low MIC values (0.4–0.9 ppm) and intermediate surface activity. CHG combined with eugenol or menthol produced strong synergistic interactions, reducing CHG MICs from up to 6250 ppm to as low as 20 ppm (>300-fold). Toxicity assays revealed a narrow safety margin for CHG, whereas PHMGH showed a more gradual concentration-dependent toxicity profile. These findings highlight clinically relevant differences in antiseptic performance and identify combination strategies that may reduce CHG exposure while maintaining antifungal efficacy. Full article

Objective: This study investigated the effects of menthol (MEN) mouth rinsing (MR) on cycling performance, neuromuscular activation, and perceptual responses during high-intensity exercise in the heat. Methods: A total of 10 trained adolescent male cyclists (16.7 ± 1.3 yrs; VO_2peak: 62.3 ± 7.6 mL·kg⁻¹·min⁻¹) completed a familiarization and two randomized, single-blind trials using a modified variable cycling test (M-VCT) in the heat (31.45 ± 0.59 °C; 23.40 ± 2.55% RH). The participants rinsed with 0.01% L-menthol or a placebo every 6 min during exercise. Power output (PO), cadence (RPM), rating of fatigue (ROF), affective feeling (FS), and surface electromyography (sEMG) were recorded. Results: Menthol MR significantly increased mean PO by 1.67 ± 1.59% (MEN: 177.1 ± 33.0 W; PLA: 174.1 ± 32.1 W; p = 0.002; d = 1.42) and enhanced cadence (MEN: 87.4 ± 5.1 RPM; PLA: 84.5 ± 5.2 RPM; p = 0.027; d = 0.84), particularly during high-intensity intervals. No significant differences were observed in ROF or FS between conditions (p > 0.05). Five muscles were monitored for activation (RF, VM, VL, TA, Gast). A significant main effect of time demonstrated decreased activation in VM, TA, RF, and Gast. VL showed a trend toward a main effect of condition (p = 0.057), with lower activation in MEN. Both VL and RF exhibited significant condition × lap interactions (p = 0.007 and p = 0.017), with progressively lower activation in MEN as fatigue progressed. Conclusions: Menthol MR significantly improved cycling performance in the heat without altering perceptual or physiological strain. Some muscles demonstrated reduced activation with menthol MR, and further study is needed to confirm the magnitude of ergogenic effects and elucidate the physiological mechanism. Full article

Cannabis sativa L. leaves (CSL) are a rich in bioactive compounds and known for their medicinal and recreational uses. In this study, a natural hydrophobic deep eutectic solvent (HDES) system composed of menthol and thymol (1:1) was employed for the efficient extraction of bioactive compounds from CSL. Extraction of bioactives was optimized at various conditions involving DES/ethanol ratio, temperature, and extraction time, as well as shaking speed through statistical models including response surface methodology (RSM) and artificial neural network (ANN). The maximum bioactive yield, equal to 70% (w/w) of powdered CSL, was achieved at optimized values of 5.5 mL DES, 4.5 mL ethanol, and 225 rpm shaking speed at 55 °C for 107.5 min. It was observed that slightly adjusting the shaking speed and temperatures customized the nature of bioactives with more antioxidant, antidiabetic, and antimicrobial properties. The extracts of CSL produced while applying natural HDES were found to be non-toxic during hemolytic assay. Overall, HDES when mixed with ethanol in 55:45 ratio produced CSL extracts with an ample level of phenolics (133.75 mg GAE/g) and flavonoids (120.05 mg QE/g). GC-MS analysis of CSL extracts produced by HDES revealed the presence of multiple bioactives like tetrahydrocannabivarin, cannabidiol, cannabinol, cannabidivarol, dl-menthol, levomenthol, and 4-hydroxy-3-methylacetophenone. Based on these findings, it can be concluded that HDES in combination with ethanol may work as an efficient extraction solvent to recover CSL bioactives without compromising their antioxidant features and safety for use in food and pharmaceutical applications. Full article

Peppermint tea is one of the most widely consumed herbal beverages worldwide, yet limited data are available on the chemical variability and quality of commercial products. This study assessed the essential oil (EO) yield and composition of 39 commercial peppermint (Mentha × piperita L.) teas and commercial EOs obtained from different countries. EO yield showed pronounced variability, ranging from 0.8 to 26.8 mL/kg. In total, 112 compounds were identified by GC-MS, accounting for 88.4–99.5% of the total EO composition. The major constituents were menthol (0.1–25.2%), menthone (0.1–21.8%), and carvone (0.6–30.0%), revealing marked chemical heterogeneity among marketed products. Several samples exhibited unusually high carvone levels accompanied by reduced menthol and menthone contents, reflecting substantial chemotypic diversity and inconsistency among marketed products. The concentrations of the regulated constituents, pulegone (0.02–2.56%) and menthofuran (0.02–6.58%), remained within the European Pharmacopoeia limits. Based on the observed levels of pulegone and menthofuran, the results do not indicate a safety concern for consumers under normal tea preparation and consumption conditions. Overall, the findings demonstrate substantial variability in the quality of commercial peppermint teas and highlight the relevance of essential oil profiling as a tool for assessing the quality and safety of herbal beverages. Full article