Search Results (4,116)

To address the issues of traditional mooring lines, such as high self-weight, low strength, and poor durability, Carbon-Fiber-Reinforced Polymer (CFRP) was investigated as a material for mooring lines of offshore floating wind turbines, aiming to achieve high performance, lightweight design, and long service life for mooring systems. Based on a “chain–cable–chain” configuration, a CFRP mooring line design is proposed in this study. Taking a 5 MW offshore floating wind turbine as the research object, the dynamic performance of offshore floating wind turbines with steel chains, steel cables, polyester ropes, and CFRP mooring lines under combined wind, wave, and current loads was compared and analyzed to demonstrate the feasibility of applying CFRP mooring lines by combining the potential flow theory and the rigid–flexible coupling multi-body model. The research results indicate that, compared to traditional mooring systems such as steel chains, steel cables, and polyester ropes, (1) under static water, the CFRP mooring system exhibits a larger static water free decay response and longer free decay duration; (2) under operating sea conditions, the motion response and mooring tension of the offshore floating wind turbine with CFRP mooring lines are smaller than those with steel cables and steel chains but greater than those with polyester ropes; and (3) under extreme sea conditions, the motion responses of the offshore floating wind turbine with CFRP mooring lines are smaller than those with steel wire ropes and steel chains but close to the displacement responses of the polyester rope system, while the increase in mooring tension is relatively moderate and the safety factor is the highest. Full article

Self-lubricating polymer composites based on polydicyclopentadiene (PDCPD) were reinforced with carbon nanomaterials to evaluate the effect of filler type and loading on their mechanical and tribological performance. Four carbon forms were introduced: carbon nanotubes (0.3 and 0.5 wt.%), carbon fibers (5 and 10 wt.%), flake graphite (5 and 10 wt.%) and dusty graphite (5 and 10 wt.%). Tensile tests showed that carbon fibers—and graphite-filled matrices reached ~50 MPa tensile strength, while the addition of carbon nanotubes resulted in a reduction in strength by half compared to the pure resin, indicating poor compatibility of carbon nanotubes with the matrix. The highest compressive strength, ~90 MPa, was obtained for PDCPD containing 5 wt.% carbon fibers. Tribological behavior was evaluated in a pin-on-disk configuration under dry sliding. All fillers lowered the coefficient of friction; the most pronounced, three-fold reduction was achieved with both graphite variants. The combined high load-bearing capacity and greatly reduced friction of the graphite and carbon fibers modified systems highlight their potential as self-lubricating bearing materials capable of replacing conventional metal or oil-lubricated components. Full article

This study has investigated the structural and seismic performance of monolithic stone columns in the historical Mosque–Cathedral of Córdoba, with a focus on the earliest section constructed during the reign of Abd al-Rahman I (VIII century). An advanced 3D finite element (FE) model has been developed to assess the effects of geometric imperfections and component interactions on the stability of columns under both vertical and horizontal static loading. Three distinct modelling strategies have been employed in OpenSees 3.7.1, incorporating column inclination and contact elements to simulate mortar interfaces. Material properties have been calibrated using experimental data and in situ observations. The gravitational analysis has shown no significant damage in any of the configurations, aligning with the observed undamaged state of the structure. Conversely, horizontal analyses have revealed that tensile damage has predominantly occurred at the lower shaft. The inclusion of contact elements has led to a significant reduction in lateral resistance, highlighting the importance of accounting for friction and interface behaviour. Column inclination has been found to have a significant influence on failure patterns. These findings have highlighted the critical role of detailed modelling in evaluating structural vulnerabilities. Such features are generally included in the numerical modelling and evaluation of heritage buildings. Consequently, they can contribute to a better understanding of the seismic behaviour of historic masonry structures. Full article

The article presents the results of uniaxial fatigue tests for the high-cycle regime on a polymer matrix composite material reinforced with Kevlar and carbon fibers, fabricated with material extrusion (MEX) technology. The samples were manufactured according to the ASTM D638 type-I standard, and the tests were performed under a load inversion factor of 0.1 at room temperature, measuring the number of cycles to failure. Based on previous results, in which different configurations were tested, tests were carried out on specimens subjected to loads ranging from 40% to 91% of the rupture stress for Kevlar and 25.5% to 80.7% for carbon, obtaining a maximum life of 2.5 M cycles for Kevlar and 4.06 M cycles for carbon. The observed failure modes included fiber tearing, matrix cracking, and fiber–matrix pull-out. Full article

In the pursuit of addressing the persistent challenge of bacterial adhesion and biofilm formation in dental care, this study investigates the efficacy of electric current as an alternative strategy, specifically focusing on its application in dental contexts. Polyether ether ketone (PEEK), known for its excellent biocompatibility and resistance to bacterial plaque, was enhanced with conductive properties by incorporating silver (Ag), a well-known antibacterial material. Through systematic in vitro experiments, the effectiveness of alternating current (AC) and direct current (DC) in reducing bacterial proliferation was evaluated. The tests were conducted using two bacterial strains: the Gram-positive Staphylococcus aureus and the Gram-negative Pseudomonas aeruginosa. Various configurations, current parameters, and two different electrode configurations were assessed to determine their impact on bacterial reduction. A notable finding from this study is that alternating current (AC) demonstrates superior efficacy compared to direct current (DC). The more significant decrease in CFUs/mL for P. aeruginosa with AC was recorded at the current levels of 5 mA and 500 nA. In opposition, S. aureus exhibited the greatest reduction at 5 mA and 1 mA. This study highlights the potential of using electric current within specific intensity ranges as an alternative strategy to effectively mitigate bacterial challenges in dental care. Full article

To further investigate the bond behavior between carbon fiber-reinforced polymer (CFRP) bars and ultra-high-performance concrete (UHPC) under monotonic loading, a finite element model was established in ABAQUS based on existing experimental data. The material parameters, constitutive models, and interface contact definitions were verified through numerical simulation. Utilizing this modeling strategy, 36 center-pull finite element models with dimensions of 150 mm × 150 mm × 150 mm were analyzed. By systematically varying the geometric parameters of the CFRP bars, the effects of surface configuration, bar diameter, and rib spacing on the bond performance between CFRP bars and UHPC were analyzed. The results demonstrate that uniform-ribbed bars exhibit the highest bond performance, followed by helical-ribbed bars, whereas dented-ribbed bars show the lowest bond strength. The ultimate bond strength decreases with increasing bar diameter. For uniform-ribbed bars, the optimal rib spacing is 1.2D (where D is the bar diameter), resulting in the highest peak bond strength. Full article

The increasing reliance on lithium-ion batteries (LIBs) in electric vehicles (EVs) has intensified the need for structurally resilient and lightweight protective enclosures that can withstand mechanical abuse during crashes. This study addresses the challenge by drawing inspiration from the hierarchical geometry of bighorn sheep horns to design a bio-inspired battery frame with improved crashworthiness. A multilayered structure, replicating both the internal and external features of the horn, was fabricated using Fused Deposition Modeling (FDM) with Acrylonitrile Butadiene Styrene (ABS) and carbon fiber composite (CFC) materials. The experimental evaluation involved tensile and compression testing, Izod impact tests, digital image correlation (DIC), and acoustic emission (AE) monitoring for full-field strain mapping, aiming to assess structural performance under various loading scenarios. Results demonstrate that the bioinspired designs exhibit enhanced energy absorption, mechanical strength, and strain distribution compared to conventional configurations. The improved vibration response and damage tolerance observed in structured samples suggest their potential for application in battery protection systems. This work underscores the feasibility of leveraging natural design principles to engineer robust, lightweight enclosures for advanced energy storage systems, contributing to safer and more reliable EV technologies. Full article

Productive and healthy soils are essential in agriculture and other economic uses of land which depend on plant growth, and are under increasing pressure globally. The physical properties of soil, its porosity and pore structure, also have a significant impact on a wide range of environmental factors, such as surface water runoff and greenhouse gas exchange. Methods exist for evaluating soil porosity that are applied in a laboratory environment or by inserting sensors into soil in the field. However, such methods do not readily sample adequately in space or time and are labour-intensive. The purpose of the current study is to investigate the potential for estimation of soil porosity and pore size using the strength of reflection of audio pulses from natural soil surfaces. Estimation of porous material properties using acoustic reflections is well established. But because of the complex, viscous interactions between sound waves and pore structures, these methods are generally restricted to transmissions at low audio frequencies or at ultrasonic frequencies. In contrast, this study presents a novel design for an integrated broad band sensing system, which is compact, inexpensive, and which is capable of rapid, non-contact, and in situ sampling of a soil structure from a small, moving, farm vehicle. The new system is shown to have the capability of obtaining soil parameter estimates at sampling distances of less than 1 m and with accuracies of around 1%. In describing this novel design, special care is taken to consider the challenges presented by real agriculture soils. These challenges include the pasture, through which the sound must penetrate without significant losses, and soil roughness, which can potentially scatter sound away from the specular reflection path. The key to this new integrated acoustic design is an extension of an existing theory for acoustic interactions with porous materials and rigorous testing of assumptions via simulations. A configuration is suggested and tested, comprising seven audio frequencies and three angles of incidence. It is concluded that a practical, new operational tool of similar design should be readily manufactured. This tool would be inexpensive, compact, low-power, and non-intrusive to either the soil or the surrounding environment. Audio processing can be conducted within the scope of, say, mobile phones. The practical application is to be able to easily map regions of an agricultural space in some detail and to use that to guide land treatment and mitigation. Full article

Electrokinetic phenomena offer promising tools for the manipulation of micro- and nanoparticles in liquid media. However, most existing techniques rely on complex configurations and are often limited to particle separation based on large size differences or distinct material properties. Here, we present a simple and tunable method for spatial control and separation of nanoparticles using interdigitated electrodes under AC electric fields. Our approach exploits subtle differences in the electroosmotic and dielectrophoretic responses of particles with small size variations but identical material compositions. By adjusting the frequency and amplitude of the applied voltage, particles can be selectively directed and accumulated at designated regions of the device, enabling precise control over their positioning and segregation. We demonstrate the effectiveness of our method using micro- and nanoparticles composed of the same material, achieving accurate spatial separation based solely on their electrokinetic behavior. This technique offers a low-cost, easily integrable platform for diverse applications, including cell manipulation, water purification, and targeted drug delivery. Full article

The increasing frequency of extreme heat events poses significant challenges to buildings in terms of escalating thermal stress, while courtyards, as a traditional passive cooling strategy, demonstrate considerable potential in improving building thermal performance and in energy savings for cooling. Although existing studies have revealed the role of courtyards in enhancing their internal microclimate, an in-depth understanding of how design parameters regulate the microclimate and thereby affect the thermal performance of adjacent buildings remains limited, constraining their effective application in coping with extreme heat. This study conducts an exploration of relevant research aiming to elucidate the mechanisms of courtyard microclimate regulation, the quantitative methods employed, and effective design strategies in addressing high temperatures. The findings indicate that courtyards influence the building thermal performance through four mechanisms: solar radiation control, airflow organization, evaporative cooling, and thermal buffering. Their effectiveness depends on the optimized combination of geometry, material properties, and landscape configuration. Moreover, different quantitative methods exhibit notable differences in scale, accuracy, and applicability. Finally, based on the identified key factors and their interactions, this study proposes optimization pathways to bridge the gap between design expectations and practical outcomes, thereby providing both a theoretical framework and practical guidance for advancing the scientific application of courtyards in enhancing building thermal performance and energy efficiency. Full article

This study presents a numerical investigation of a solar dryer prototype integrated with microencapsulated phase change material (MPCM) for rice drying under tropical climatic conditions. The thermal and drying behavior of the system was evaluated under the following four configurations: a baseline solar dryer, a dryer with MPCM only, a dryer with an auxiliary heater, and a combined system using both MPCM and auxiliary heating. The prototype was also tested with rice layers of 25 mm and 45 mm to assess the influence of layer thickness on drying performance. The results showed that the use of MPCM reduced temperature fluctuations from about $\Delta T\approx 70$ °C in the baseline case to stabilized values near 33–34 °C (MPCM only) and 35–38 °C (MPCM + heater), contributing to a more stable thermal environment. In thinner layers (25 mm), MPCM helped prevent localized overheating, while in thicker layers (45 mm), it promoted more uniform moisture reduction. However, the overall improvement in drying performance was marginal, as efficiency remained strongly dependent on heater support. The study points out the need for improved integration of PCM within dryer design. Enhanced thermal contact and strategic preheating of MPCM could improve heat discharge during non-solar periods. Future work will focus on experimental validation, design optimization, and the development of preheating strategies to maximize the benefits of PCM-assisted solar drying systems. Full article

This study presents the mechanical design and analysis of a quantum electro-optical transducer engineered to operate at millikelvin temperatures within a dilution refrigerator. The transducer enables bidirectional microwave-optical frequency conversion through a hybrid architecture that integrates a superconducting radiofrequency (SRF) cavity with an electro-optic optical cavity. Among several design options investigated, the configuration offering the best thermal and mechanical performance was selected, yielding a robust solution with reduced sensitivity to fabrication tolerances, improved heat dissipation, as well as alignment precision. The design ensures uniform temperature distribution, enabling higher laser pump powers and, thus, increased conversion efficiency, while maintaining mechanical stresses safely below the material yield strength. Electromagnetic simulations further validate the design, demonstrating enhanced coupling between the optical and microwave modes, as well as a broader tuning range achieved with smaller tuner displacements. Full article

Anaerobic digestion (AD) technology is universally acknowledged as the most economically viable and efficient approach for energy recovery from livestock manure. To validate the efficacy of riboflavin-functionalized carbon-based conductive materials (CCM-RF) in enhancing methane production at pilot scale, three pilot-scale upflow anaerobic sludge blanket (UASB) reactors were constructed and separately supplemented with carbon cloth (CC), granular activated carbon (GAC), and a combination of CC and GAC. During reactor initialization, riboflavin and a concentrated inoculum of Methanosarcina barkeri (M. barkeri) were introduced to investigate the mechanistic role of CCM-RF in promoting direct interspecies electron transfer (DIET) and optimizing treatment efficiency during anaerobic digestion of cattle manure wastewater. The results showed that all reactors improved AD performance and maintained stable operation at the OLR of 15.66 ± 1.95 kg COD/(m³·d), with a maximum OLR of 20 kg COD/(m³·d) and the HRT as short as 5 days. Among the configurations, the CC reactor outperformed the others, achieving a methane volumetric yield of 6.42 m³/(m³·d), which represents an eight-fold increase compared to conventional AD systems. Microbial community analysis revealed that, although M. barkeri was initially inoculated in large quantities, Methanothrix—a methanogen with DIET capability—eventually became the dominant species. The enrichment of Methanothrix and the simultaneous enhancement in sludge conductivity collectively verified the mechanistic role of CCM-RF in promoting CO₂-reductive methanogenesis through strengthened DIET pathways. Notably, M. barkeri showed progressive proliferation under conditions of high organic loading rates (OLR) and short hydraulic retention time (HRT). This phenomenon provides a critical theoretical basis for the development of future strategies aimed at the targeted enrichment of Methanosarcina-dominant microbial consortia. Full article

Machining hard metals presents various challenges, especially with materials like WC-Co, known for their exceptional hardness and wear resistance, making them ideal for cutting tools. Among machining methods, Electrical Discharge Machining (EDM) stands out for its ability to machine hard materials with no mechanical damage, which is critical for machining fragile components. For form shape machining symmetrical parts like WC-Co bars, electrical discharge turning (EDT) could be applied. Despite its potential, limited research exists on deep form turning of hard metals like WC-Co using EDT. This study addresses that gap by comparing the final geometrical outcomes of two EDT setups: vertical and horizontal tool electrode configurations. Additionally, the impact of workpiece rotational speed on surface quality was examined. Results showed that the vertical tool electrode setup produced more accurate geometries and smoother surfaces. Furthermore, increasing the workpiece’s rotational speed improved flushing efficiency, resulting in reduced surface roughness and a cleaner machined surface. Full article

Building-integrated photovoltaic (BIPV) systems play a pivotal role in advancing low-carbon urban transformation. However, replacing conventional building envelope materials with photovoltaic (PV) panels modifies heat transfer processes and airflow patterns, potentially influencing urban environmental quality. This study examines the impacts of BIPV on building energy efficiency, PV system performance, and street canyon micro-climates, including airflow, temperature distribution, and pollutant dispersion, under perpendicular wind speeds ranging from 0.5 to 4 m/s, across three installation configurations and three installation positions. Results indicate that rooftop PV panels outperform facade-mounted systems in power generation. Ventilated PV configurations achieve optimal energy production and thermal insulation, thereby reducing building cooling loads and associated electricity consumption. Moreover, BIPV installations enhance street canyon ventilation, improving pollutant removal rates: ventilation rates increased by 1.43 times (rooftop), 3.02 times (leeward facade), and 2.09 times (windward facade) at 0.5 m/s. Correspondingly, canyon-averaged pollutant concentrations decreased by 30.1%, 87.7%, and 85.9%, respectively. However, the introduction of facade PV panels locally reduces pedestrian thermal comfort, particularly under low wind conditions, but this negative effect is significantly alleviated with increasing wind speed. To quantitatively evaluate BIPV-induced micro-climatic impacts, this study introduces the Pollutant-Weighted Air Exchange Rate (PACH)—a metric that weights the air exchange rate by pollutant concentration—providing a more precise indicator for evaluating micro-environmental changes. These findings offer quantitative evidence to guide urban-scale BIPV deployment, supporting the integration of renewable energy systems into sustainable urban design. Full article