Search Results (304)

In this paper, an adaptive-weight model predictive control (AW-MPC) strategy is proposed to address the trajectory tracking problem of a lower-limb rehabilitation exoskeleton robot. First, based on human motion analysis, the dynamics of the lower-limb rehabilitation exoskeleton are established, and the nonlinear dynamic model is transformed into a linear model. Second, a MPC objective function is formulated to minimize the tracking error, yielding the optimal control input. Then, on the basis of conventional MPC, a weight-tuning scheme is developed: a weighting function is constructed according to the evolution of the tracking error to adaptively adjust the MPC weighting coefficients, and the closed-loop stability of the control system is proven via a Lyapunov-based analysis. Finally, the proposed method is validated on a lower-limb rehabilitation exoskeleton experimental platform, with a PID controller designed as a baseline for comparison. The experimental results demonstrate that, compared with the PID controller, the proposed AW-MPC achieves faster convergence of the tracking error, higher tracking accuracy, and enhanced robustness. Full article

This study develops a reduced-order predictive model of the Sit-To-Stand (STS) task to examine whether a simplified biomechanical representation can reproduce key STS patterns reported in the literature and to investigate the role played in movement by a flexible trunk. The model represents the human body as a planar multibody system and formulates STS as an optimization problem within a discrete mechanics framework. This formulation combines reduced model complexity, explicit torso flexibility, and a structure-preserving numerical approach for trajectory generation. Simulations were used to evaluate the effects of movement duration, reduced joint strength, and seat height on joint torques, kinematics, trunk motion, and ground reaction forces (GRFs). The results reproduced several qualitative trends reported in previous experimental studies, including increased peak joint torques and GRFs with shorter movement duration, lower joint strength, and reduced seat height, as well as greater compensatory trunk motion under more demanding conditions. These findings suggest that the proposed framework captures key adaptive features of STS mechanics and may provide useful insights for rehabilitation analysis and the design of assistive technologies such as lower-limb exoskeletons and rehabilitation devices. At the same time, the present work should be regarded as an initial methodological study, since validation is currently qualitative and further experimental calibration, quantitative validation, and sensitivity analysis remain part of ongoing work. Full article

Transmission tower climbing is a critical specialized operation in ultra-high-voltage power maintenance and communication infrastructure servicing. However, existing lower-limb exoskeletons used for tower climbing still suffer from insufficient motion intention recognition accuracy under complex operational environments. To address this issue, this study proposes an inertial measurement unit (IMU)-based bidirectional temporal deep learning method for motion intention recognition. First, a one-dimensional convolutional neural network (1D-CNN) is employed to extract local temporal features from multi-channel IMU signals. Subsequently, a bidirectional long short-term memory network (Bi-LSTM) is introduced to model the forward and backward temporal dependencies of motion sequences. Furthermore, a temporal attention mechanism is incorporated to emphasize discriminative features at critical movement phases, enabling the precise recognition of short-duration and transitional motions. Experimental results demonstrate that the proposed method outperforms traditional machine learning approaches and unidirectional temporal models in terms of accuracy, F1-score, and other evaluation metrics. In particular, this method demonstrates significant advantages in identifying the flexion/extension phases and transitional states. This study provides an offline method for analyzing movement intentions in lower-limb exoskeleton control for power transmission tower climbing scenarios and offers a reference for developing assistive control strategies for assisted climbing tasks in this specific context. Full article

Lower-limb exoskeleton robots play a pivotal role in rehabilitation medicine and assistive augmentation, where precise dynamic modelling and trajectory tracking control are fundamental to effective assistance. Existing models predominantly focus on hip and knee rotational degrees of freedom, with insufficient attention to ankle dynamics and pelvic translation. To address these limitations, this paper establishes a sagittal-plane dynamic model comprising nine generalised coordinates, treating the human lower limb and exoskeleton as an integrated coupled system. A seven-segment kinematic model encompassing the trunk, bilateral thighs, shanks, and feet is constructed via a modified Denavit–Hartenberg parameter method, and dynamic equations are derived using Lagrangian formulation. Three control strategies—PD control, PD with gravity compensation, and the computed torque method—are designed and evaluated through simulations using gait data from five subjects (two self-collected, three from a public dataset) acquired via Vicon motion capture. Results demonstrate that the computed torque method achieves a joint angle tracking root mean square error (RMSE) of 0.59°, representing an 86.3% improvement over conventional PD control, while maintaining a low control torque RMS of 4.44 N·m. The controller exhibits stable tracking performance across walking speeds of 0.4–1.45 m/s, validating the effectiveness of the proposed model and control strategies. Full article

Lower-limb rehabilitation exoskeletons must balance biomechanical compatibility, structural safety, and low mass to enable practical, repeatable gait assistance. This paper proposes a planar pantograph-derived exoskeleton leg driven by a Chebyshev Lambda linkage and develops an integrated workflow from mechanism synthesis to manufacturable optimization and experimental verification. A mannequin-coupled multibody model was built in MSC ADAMS to evaluate joint kinematics, end-point (foot) trajectories, and joint reaction forces under multiple scenarios (fixed-frame, ramp, stair ascent, and inclined-plane walking). The extracted joint loads were transferred to a parametric finite element model in ANSYS Workbench 2019, where response surface surrogates and a multi-objective genetic algorithm (MOGA) were used to minimize mass under stiffness and strength constraints. For the optimized load-bearing link, the selected minimum-mass design reached a component mass of 0.542 kg while respecting the imposed structural limits, i.e., a maximum total deformation below 0.2 mm and a maximum equivalent (von Mises) stress below 50 MPa (e.g., ~0.188 mm deformation and ~39 MPa stress in the optimal candidate). A rapid prototype was manufactured by 3D printing and experimentally evaluated using CONTEMPLAS high-speed video tracking, providing measured X_M(t) and Y_M(t) trajectories and joint-angle histories for quantitative comparison with simulations via RMSE metrics. Full article

For safe and efficient human–robot interaction, lower-limb exoskeletons used for assistance and rehabilitation need to be precisely and energy-efficiently controlled. By creating an adaptive neuro-fuzzy fractional-order PID (ANFIS-FOPID) controller, this project seeks to improve tracking accuracy, robustness, and energy efficiency in a two-degree-of-freedom hip–knee exoskeleton. The Euler–Lagrange formulation is used to derive a nonlinear dynamic model, and a Lyapunov-based stability analysis is used to show that the closed-loop system remains uniformly ultimately bounded under disturbances and parameter uncertainties. The suggested controller performs noticeably better than traditional PID and fixed-parameter FOPID controllers, according to numerical simulations conducted under both normal and perturbed conditions. The ANFIS FOPID achieves root mean square errors below 0.028 rad and lowers the integral absolute errors at the hip and knee joints to 0.1454 and 0.1480, as opposed to 0.3496–0.3712 for PID controllers. Under ±10% parameter uncertainty, the total control-energy proxy drops from 2870.0 (PID) to 936.25, a 67.4% decrease, and stays at 1587.93. Statistically significant variations in energy consumption are confirmed by one-way ANOVA (p < 10⁻¹⁷⁶). Large effect sizes are found (η² = 0.237–0.314). These results demonstrate the superior tracking performance, robustness, and energy efficiency of the ANFIS-FOPID controller. The results set a quantitative standard for future experimental validation and hardware-in-the-loop implementation, despite being based on high-fidelity simulations. Full article

This study identifies electromyography (EMG) features as an alternative to metabolic cost for distinguishing varying levels of movement effort. Data from two experiments was used to analyze the performance of 50 EMG-based features. The first experiment, the Load experiment, involved participants walking with and without carrying loads of 2, 4, and 8 kg, and the second, the Exo experiment, had participants walking with and without varying levels of hip exoskeleton assistance. In the Load experiment, amplitude-based features generally performed well, with Waveform Length (WL) emerging as the top-performing feature achieving a detection rate of 77% when distinguishing between loaded and unloaded conditions in the most challenging 2 kg condition. In contrast, in the Exo experiment, where both increases and decreases in EMG were observed throughout the stride, it failed and mean-based as well as variance-based features performed best and effectively captured fluctuations in muscle activation with a detection rate of up to 71%. This study underscores the importance of selecting EMG features tailored to specific movement tasks and highlights the potential benefits of noise management strategies to improve detection performance for varying levels of movement effort, providing a foundation for EMG-based human-in-the-loop optimization of lower limb exoskeletons. Full article

Ensuring user safety while enabling independent mobility is crucial to autonomous healthcare and rehabilitation robots, such as active lower-limb orthoses and exoskeletons. A key requirement for these devices is to provide full assistance without supervision; however, existing designs do not simultaneously satisfy autonomous operation and inherent safety. To address this gap, a novel safety principle, Safety by Design, and a corresponding system architecture for a fully assistive active knee orthosis are introduced. The proposed architecture is based on a comprehensive risk analysis for the use of active orthoses and exoskeletons and integrates redundancies for all safety-critical components while minimizing additional weight. This redundancy enables the orthosis to remain operational at reduced power in the event of component failure, improving both user safety and system reliability. The design supports safe, unsupervised operation by ambulatory users, enhancing independent patient mobility and the performance of the gait activities of level walking, stair climbing and sitting down/standing up. The proposed architecture is scalable and adaptable to a wide range of robotic devices. By improving robustness, efficiency, and safety, this work contributes to the advancement of autonomous biomedical robotic systems and wearable assistive devices. Full article

Lower-limb exoskeletons require accurate dynamic models to achieve stable and compliant human–robot interactions. However, least-squares-based identification often relies on demanding experiments and may yield limited accuracy for exoskeletons with non-standard structures and actuator-induced uncertainties. This paper proposes a two-stage dynamic parameter identification method that integrates recursive least squares (RLS) and a genetic algorithm (GA), denoted as RLS-GA. RLS is first executed offline to estimate the variation ranges of the inertial parameter vector and to construct a finite, physically meaningful search space. GA then refines the parameters within these bounds by minimizing the regression residual norm. Experiments on a hip exoskeleton show that RLS-GA achieves higher identification accuracy than LS and unconstrained GA, while converging faster than GA under identical conditions. Full article

Most pediatric exoskeletons for cerebral palsy (CP) focus on lower-limb assistance and neglect trunk control, limiting rehabilitation outcomes. This study presents a self-aligning trunk–limb exoskeleton that integrates trunk stabilization with active lower-limb support. The design includes a hip–waist rapid adjustment mechanism, a bioinspired gear-rolling knee joint, modular thigh–shank structures, a trunk support module, and a body-weight support device. To enable transparent and coordinated assistance under pathological gait conditions, a continuous gait progress-based multi-joint control framework is developed. Joint motion is described as continuous gait progress over the full gait cycle (0–100%), and joint-specific progress estimates are fused into a unified system-level reference using observability-weighted circular statistics. Inter-joint coordination is achieved through phase-consistency-based temporal modulation implemented, enabling smooth synchronization while preserving joint-level autonomy and motion continuity. Technical evaluation—comprising kinematic misalignment analysis, simulation validation, and gait trials—demonstrated a 66.8% reduction in hip misalignment and an 87.4% reduction in knee misalignment. Gait parameters under exoskeleton-assisted walking closely matched baseline walking, confirming natural kinematic preservation without interference. These results indicate that the proposed trunk–limb exoskeleton improves human–robot synergy, enhances postural stability, and provides a promising solution for pediatric gait rehabilitation in CP. Full article

Exoskeletons are increasingly used in industrial settings, yet most are designed for structured, repetitive tasks, limiting adaptability to dynamic movements. In construction, frequent locomotion tasks demand continuous lower-limb engagement, and ladder climbing places substantial loads on coordination and flexibility. This study aimed to identify key muscles involved in climbing to support the development of adaptive exoskeletons. Ten healthy male participants (33.8 ± 3.4 years; 178.7 ± 5.0 cm; 87.4 ± 16.1 kg) performed vertical and A-frame ladder ascents in a controlled laboratory setting. Surface electromyography was recorded from eight right-leg muscles and processed using band-pass filtering, rectification, and root mean square smoothing. Two normalization strategies were applied: walking normalization, expressing climbing activity relative to level walking, and maximum voluntary contraction normalization, with amplitudes expressed as a percentage of maximum voluntary contraction. Our results showed that all muscles were more active in climbing than walking, with quadriceps (vastus medialis, vastus lateralis, rectus femoris) exhibiting the greatest increases. Gastrocnemius also approached or exceeded 100%MVC, tibialis anterior averaged 70–80%MVC, and hamstrings contributed 20–40%MVC mainly for stabilization. Vertical and A-frame ladders followed similar patterns with subtle posture-related variations. These findings highlight knee extensors as primary targets for adaptive exoskeleton assistance during ladder climbing tasks commonly performed on construction sites. Full article

Exoskeleton knee-assistance (EKA) systems are wearable robotic technologies designed to rehabilitate and improve impaired mobility of the lower limbs. Clinical exercises are conducted on disabled patients based on physically demanding tasks which are prescribed by expert physicians. In order to carry out good tracking of the desired tasks, efficient controllers must be designed. In this study, a novel control framework is introduced to improve the robustness characteristics and tracking precision of EKA systems. The control approach integrates a super-twisting sliding mode controller (STSMC) with a nonlinear disturbance observer (NDO) to ensure robust and precise tracking of the knee joint trajectory. An evaluation of the proposed system is conducted through numerical simulations under the influence of external disturbances. The findings reveal considerable enhancements to trajectory tracking accuracy and disturbance rejection when compared to conventional STSMCs and sliding mode perturbation observer (SMPO)-based STSMCs. Full article

Against the backdrop of intensifying global population aging, lower-limb exoskeleton robots serve as core devices for rehabilitation and power assistance. Their control accuracy and motion smoothness rely on precise dynamic models. However, parameter uncertainties caused by variations in human lower limbs, assembly errors, and wear pose a critical bottleneck for accurate modeling. Aiming to achieve high-precision dynamic modeling for a two-degree-of-freedom lower-limb exoskeleton, this paper proposes a parameter identification method named Tent-GA-GWO. A dynamic model incorporating joint friction and link inertia was constructed and linearized. An excitation trajectory based on Fourier series, conforming to human physiological constraints, was designed. To enhance algorithm performance, Tent chaotic mapping was employed to optimize population initialization, a nonlinear control parameter was used to balance search behavior, and genetic algorithm operators were integrated to increase population diversity. Simulation results show that, compared to the traditional GWO algorithm, Tent-GA-GWO improved convergence efficiency by 32.1% and reduced the fitness value by 0.26%, demonstrating superior identification accuracy over algorithms such as GA and LIL-GWO. Validation on a physical prototype indicated a close agreement between the computed torque based on the identified parameters and the actual output torque, confirming the method’s effectiveness and engineering feasibility. This work provides support for precise control of exoskeletons. Full article

Control of elbow exoskeletons using muscular signals, although promising for the rehabilitation of millions of patients, has not yet been widely commercialized due to challenges in real-time intention estimation and management of dynamic uncertainties. From a practical perspective, millions of patients with stroke, spinal cord injury, or neuromuscular disorders annually require active rehabilitation, and elbow exoskeletons with precise and safe motion intention tracking capabilities can restore functional independence, reduce muscle atrophy, and lower treatment costs. In this research, an intelligent control framework was developed for an elbow joint exoskeleton, designed with the aim of precise and safe real-time tracking of the user’s motion intention. The proposed framework consists of two main stages: (a) real-time estimation of desired joint angle (as a proxy for movement intention) from High-Density Surface Electromyography (HD-sEMG) signals using an LSTM network and (b) implementation and comparison of three PID, impedance, and sliding mode controllers. A public EMG dataset including signals from 12 healthy individuals in four isometric tasks (flexion, extension, pronation, supination) and three effort levels (10, 30, 50 percent MVC) is utilized. After comprehensive preprocessing (Butterworth filter, 50 Hz notch, removal of faulty channels) and extraction of 13 time-domain features with 99 percent overlapping windows, the LSTM network with optimal architecture (128 units, Dropout, batch normalization) is trained. The model attained an RMSE of 0.630 Nm, R² of 0.965, and a Pearson correlation of 0.985 for the full dataset, indicating a 47% improvement in R² relative to traditional statistical approaches, where EMG is converted to desired angle via joint stiffness. An assessment of 12 motion–effort combinations reveals that the sliding mode controller consistently surpassed the alternatives, achieving the minimal tracking errors (average RMSE = 0.21 Nm, R² ≈ 0.96) and showing superior resilience across all tasks and effort levels. The impedance controller demonstrates superior performance in flexion/extension (average RMSE ≈ 0.22 Nm, R² > 0.94) but experiences moderate deterioration in pronation/supination under increased loads, while the classical PID controller shows significant errors (RMSE reaching 17.24 Nm, negative R² in multiple scenarios) and so it is inappropriate for direct myoelectric control. The proposed LSTM–sliding mode hybrid architecture shows exceptional accuracy, robustness, and transparency in real-time intention monitoring, demonstrating promising performance in offline simulation, with potential for real-time clinical applications pending hardware validation for advanced upper-limb exoskeletons in neurorehabilitation and assistive applications. Full article

Objective: The purpose of this study is to develop a mechatronic device capable of characterizing the kinematics of the knee joint, based on the acquisition and analysis of data focused on the knee joint point. Methods: A mechatronic device was designed using dimensional data from a participant’s lower limb (1.59 m, 57 kg), obtained through 3D scanning. The device, based on a proportional mechanism aligned with anatomical reference points, allows the evolution of the knee joint pivot point (PPKJ) to be recorded. Ten healthy subjects (aged 22–26 years, height 1.50–1.63 m, body mass 48–59 kg) were selected for testing. The device was placed on each knee to record joint trajectories during squats. The trajectories were classified into two groups: extension to flexion and flexion to extension. For each group, the average trajectory was calculated. Results: Forty PPKJ trajectories were obtained, divided into two sets: extension to flexion with a range of 8° to 51.3° and flexion to extension with a range of 6.7° to 56.83°, which allowed the mean trajectory and cubic polynomial regression to be calculated as the best approximation for characterizing the trajectory of the instantaneous center of rotation of the knee joint. Conclusions: The developed mechatronic device offers an accessible and non-invasive solution for recording the trajectory of the knee joint pivot point in individuals with characteristics like those in the study. This alternative approach could improve the representation of knee kinematics in the design of customized prostheses, exoskeletons, and rehabilitation devices for lower limbs. Full article