Search Results (1,216)

Regional green development requires balancing anthropogenic carbon emissions (CEs) with vegetation carbon sequestration (VCS). Using the CASA model and plant photosynthesis equation, we estimated VCS from net primary productivity (NPP) and proposed a Carbon Balance Pressure Index (CBPI) to quantify the imbalance between carbon sources and sinks. Spatial analysis and a geographic detector were applied to examine influencing factors of CBPI across Sichuan–Chongqing from 2001 to 2017. Results show that CE increased by 178%, while VCS rose by 27%. Regional CBPI thus enhanced from 0.35 to 0.76, aligning with CE trends. The CBPI presented a clear west-low (0–0.2, except Panzhihua), center-high (peak 3.1 in Chengdu), moderate-east (0.1–0.8) pattern. Geographic detector reveals that economic development and urbanization accounted for 80% of CBPI heterogeneity, followed by transportation (65%). Energy-intensive industries dominated developed areas, while construction-land expansion prevailed in developing regions. This study underscores region-specific emission-sink pathways and provides an empirical basis for differentiated low-carbon strategies in similar rapidly urbanizing regions in China. Full article

This study addresses the challenge of rapid identification and assessment of localized damage to building envelopes under resource-constrained conditions—specifically, the absence of specialized inspection equipment—with a particular focus on the detrimental effects of such damage on thermal performance and energy efficiency. An efficient detection methodology tailored to small-scale maintenance scenarios is proposed, leveraging the YOLOv11 object detection architecture to develop an intelligent system capable of recognizing common envelope defects in contemporary residential buildings, including cracks, spalling, and sealant failure. The system prioritizes the detection of anomalies that may induce thermal bridging, reduced airtightness, or insulation degradation. Defects are classified according to severity and their potential impact on thermal behavior, enabling a graded, integrated repair strategy that holistically balances structural safety, thermal restoration, and façade aesthetics. By explicitly incorporating energy performance recovery as a core objective, the proposed approach not only enhances the automation of spatial data processing but also actively supports the green operation and low-carbon retrofitting of existing urban building stock. Characterized by low cost, high efficiency, and ease of deployment, this method offers a practical and scalable technical pathway for the intelligent diagnosis of thermal anomalies and the enhancement of building energy performance. It aligns with the principles of high-quality architectural development and sustainable building governance, while concretely advancing operational energy reduction in the built environment and contributing meaningfully to energy conservation goals. Full article

Coal gangue, as a predominant solid byproduct of the global coal industry, poses severe environmental challenges because of its massive accumulation and low utilization rate. This review systematically synthesizes and analyzes published experimental and analytical studies on the dual-pathway utilization of coal gangue in concrete, including Pathway 1 (aggregate substitution) and Pathway 2 (cementitious activity activation). While the application of coal gangue aggregates is traditionally limited by their inherent high porosity and lower mechanical strength than those of natural aggregates, this review demonstrates that performance barriers can be effectively overcome. Through multiscale modification strategies—including surface densification, biological mineralization (MICP), and matrix synergy—the interfacial defects are significantly mitigated, allowing for feasible substitution in structural concrete. Conversely, for the mineral admixture pathway, controlled thermal activation is identified as a key process to optimize the phase transformation of kaolinite, thereby significantly enhancing pozzolanic reactivity and long-term durability. According to reported studies, the partial replacement of natural aggregates or cement with coal gangue can reduce CO₂ emissions by approximately tens to several hundreds of kilograms per ton of coal gangue utilized, depending on the substitution level and activation strategy, highlighting its considerable potential for carbon reduction in the construction sector. Nevertheless, challenges related to energy-intensive activation processes and variability in raw gangue composition remain. These limitations indicate the need for future research focusing on low-carbon activation technologies, standardized classification of coal gangue resources, and long-term performance validation under realistic service environments. Based on the synthesized literature, this review discusses hierarchical utilization concepts and low-carbon activation approaches as promising directions for promoting the sustainable transformation of coal gangue from an environmental liability into a carbon-reduction asset in the construction industry. Full article

Graphene oxide (GO) is a carbon-based nanomaterial explored for agricultural and forestry uses, but plant responses are strongly subject to both the dose and the route of exposure. We summarized recent studies with defined graphene oxide (GO) exposures by seed priming, foliar delivery, and root or soil exposure, while comparing annual crops with woody forest plants. Mechanistic progress points to a shared physicochemical basis: surface oxygen groups and sheet geometry reshape water and ion microenvironments at the soil–seed and soil–rhizosphere interfaces, and many reported shifts in antioxidant enzymes and hormone pathways likely represent downstream stress responses. In crops, low-to-moderate doses most consistently improve germination, root architecture, and tolerance to salinity or drought stress, whereas high doses or prolonged root exposure can cause root surface coating, oxidative injury, and photosynthetic inhibition. In forest plants, evidence remains limited and often relies on seedlings or tissue culture. For forest plants with long life cycles, processes such as soil persistence, aging, and multi-seasonal carry-over become key factors, especially in nurseries and restoration substrates. The available data indicate predominant root retention with generally limited root-to-shoot translocation, so residues in edible and medicinal organs remain insufficiently quantified under realistic-use patterns. This review provides a scenario-based framework for crop- and forestry-specific safe-dose windows and proposes standardized endpoints for long-term fate and ecological risk assessment. Full article

In the context of China’s dual-carbon agenda and the Digital China initiative, elucidating the role of digital literacy in shaping consumption-based household carbon emissions (HCE) is essential for advancing low-carbon urban living and supporting a broader green transition. Existing research has rarely examined, at the individual level, how digital capability shapes household consumption decisions and the structure of carbon emissions. Accordingly, this study draws on matched household-individual microdata from the China Family Panel Studies (CFPS). We employ a two-way fixed effects model, kernel density analysis, and qualitative comparative analysis. We test the nonlinear effect of digital literacy on household consumption-related carbon emissions and examine its heterogeneity. We also examined the mediating role of perceived environmental pressure, social trust and income level. The research results show that: (1) The net impact of digital literacy on carbon emissions related to household consumption shows an inverted U-shaped curve, rising first and then falling. When digital literacy is low, it mainly increases emissions by expanding consumption channels, reducing transaction costs and improving convenience. Once digital literacy exceeds a certain threshold, the mechanism will gradually turn to optimize the consumption structure, so as to support the low-carbon transformation of individuals. (2) The impact of digital literacy on HCE is structurally different in different types of consumption. In terms of transportation and communication expenditure, the emission reduction effect is the most significant, and with the improvement in digital literacy, this effect will become more and more obvious. For housing-related consumption, the turning point appeared the earliest. With the improvement in digital literacy, its effect will enter the emission reduction stage faster. (3) Digital literacy can reduce carbon emissions related to household consumption by enhancing residents’ perception of environmental pressure and strengthening social trust. However, it may also increase emissions by increasing residents’ incomes, because it will expand the scale of consumption, which will lead to an increase in carbon emissions related to household consumption. (4) The heterogeneity analysis shows that as digital literacy improves, carbon emissions increase more strongly among rural residents, people with low human capital, low-income households, and women. However, the turning-point threshold for emission reduction is relatively lower for women and rural residents. (5) Low-carbon transitions in household consumption are shaped by dynamic interactions among multiple factors, and multiple pathways can coexist. Digital literacy can work with environmental responsibility to endogenously promote low-carbon consumption behavior. It can also, under well-developed infrastructure, empower households and amplify the emission-reduction effects of technology. Full article

This study aims to develop a cost-effective and scalable modification strategy for valorizing lignin-rich biogas residue (BR) into high-performance adsorbents for anionic dye removal. To screen the optimal modification pathway, three distinct reagents, L-cysteine-based amino acid ionic liquids (AAILs, as green alternatives), conventional hydrochloric acid (HCl) and sodium hydroxide (NaOH, as traditional modification reagents), were compared in modifying non-carbonized BR for Congo Red (CR) adsorption. Comprehensive characterizations and adsorption tests revealed that each modifier exerted unique effects: NaOH only caused mild surface etching with limited performance improvement; AAILs achieved moderate adsorption capacity via a green, mild route; while HCl modification (BR-HCl) stood out with the most superior performance through a “selective dissolution-pore reconstruction” mechanism. Notably, despite a modest specific surface area increase to 12.05 m²/g, BR-HCl’s high CR adsorption capacity (120.21 mg/g at 45 °C) originated from the synergy of chemical bonding and enhanced electrostatic attraction—its isoelectric point (pH_PZC ≈ 9.02) was significantly higher than that of AAIL- and NaOH-modified samples, enabling strong affinity for anionic CR across a wide pH range. BR-HCl attained over 99% CR removal at a dosage of 0.4 g/L, fitted well with Langmuir isotherm and pseudo-second-order kinetic models (confirming monolayer chemisorption), and retained 82% of its initial capacity after five regeneration cycles. These results demonstrate that while AAILs show promise as green modifiers and NaOH serves as a baseline, the facile, low-cost HCl modification offers the most pragmatic pathway to unlock BR’s potential for sustainable wastewater treatment. Full article

1,4-Butanediol (1,4-BDO) is a bulk chemical widely used in the modern chemical industry as a solvent, a precursor for polymers, and an intermediate in fine-chemical synthesis. However, its current industrial production primarily relies on petrochemical processes, which are sensitive to fluctuations in fossil fuel prices and raise environmental concerns. To address these challenges, bio-based production of 1,4-BDO has emerged as a promising alternative. This review summarizes recent advances in the biological synthesis of 1,4-BDO, focusing on three engineered pathways: (i) the central carbon metabolism pathway that consists of glycolysis and the tricarboxylic acid cycle; (ii) the non-phosphorylative pathway that utilizes lignocellulose-derived sugars; and (iii) the synthetic pathway based on one-carbon compounds. Key progress in pathway optimization and substrate utilization is highlighted. The main bottlenecks of large-scale bio-based 1,4-BDO production including product toxicity, trade-offs between cell growth and synthesis, and the gap between laboratory conditions and industrial production are also discussed. Finally, future research directions are proposed to improve the economic viability and environmental sustainability of 1,4-BDO biomanufacturing. Full article

The Qinling–Bashan mountainous region and its surrounding areas in Shaanxi Province constitute a critical ecological security barrier and significant socio-economic zone within China, currently experiencing mounting ecological stress from both natural processes and anthropogenic activities. This study proposes an ecological restoration zoning framework built upon assessments of ecological vulnerability (EV) and ecosystem service value (ESV). The InVEST model was used to quantify major ecosystem services, while the Vulnerability Scoping Diagram (VSD) model evaluated ecological vulnerability. Both the ESV and EV layers were classified using the natural breaks method and aggregated at the township level to delineate restoration zones. Unlike previous studies relying on subjective judgment, this study constructs a standardized ‘vulnerability–service value’ decision matrix for the Qinling–Bashan region, providing a clear technical pathway for spatial restoration. Key findings include the following: (1) Spatial Vulnerability Pattern: The Qinling and Bashan mountain cores exhibit predominantly low vulnerability (potential and slight), while severe vulnerability is concentrated in the urbanizing Guanzhong Plain, emphasizing the need for urban ecological restoration. (2) Dominant Ecosystem Services: Carbon storage and net primary productivity (NPP) together account for 93% of the total ESV, highlighting the importance of forest conservation for national climate regulation. (3) Zoning Strategy: Four functional zones were defined, with the largest being the ecological conservation zone (44.8%), while a smaller ecological restoration zone (2.8%) in urban peripheries requires targeted intervention. Full article

Against the backdrop of global climate governance and China’s “dual carbon” goals, carbon emissions trading (CET) has become a core policy instrument for promoting low-carbon transformation. However, it remains unclear whether CET policies can effectively improve corporate carbon performance and, more importantly, through which micro-level mechanisms such effects operate within firms. To address these gaps, this study applies a difference-in-differences (DID) approach to examine the impact of CET policy on corporate carbon performance and its transmission pathways. The results show that CET policy significantly enhances corporate carbon performance. Heterogeneity analysis further reveals that this positive effect is more pronounced in regions with lower environmental governance intensity, and that the policy’s effectiveness strengthens over time. Mechanism tests indicate that financing constraints and R&D investment serve as chain mediators: CET policy alleviates financing constraints, stimulates R&D investment, and thereby improves carbon performance. Moreover, the moderating effect analysis shows that executives’ green backgrounds reinforce the policy’s effectiveness by further easing financing constraints and mitigating their negative impact on R&D investment. Overall, these findings deepen the micro-level understanding of market-based environmental regulation and provide policy implications for optimizing CET policy design, improving resource allocation efficiency, and fostering low-carbon transformation and sustainable competitive advantages for enterprises. Full article

In light of the persistently mounting pressure on urban and rural waste management, developing efficient, low-carbon, and resource-oriented waste treatment technologies represents a critical challenge demanding urgent breakthroughs. Thermophilic anaerobic digestion (TAD), possessing these advantages, demonstrates unique application prospects in food waste treatment. However, its inherent instability constrains its engineering-scale implementation. This paper systematically reviews existing laboratory and pilot-scale research, focusing on: (1) Thecomplex interactions and synergistic effects of primary inhibitory factors; (2) The dynamic characteristics of microbial communities and their adaptive restructuring mechanisms under thermophilic stress; (3) The efficacy and underlying mechanisms of co-digestion, process control, and two-phase system strategies. This study aims to establish a clear pathway from mechanistic understanding to engineering optimisation, providing a theoretical framework for enhancing the operational stability and scalability of the TAD process. Full article

This study systematically examines the policy and technological pathways for the sustainable development of China’s 3D printing industry under the “Dual Carbon” goals. A three-dimensional sustainability framework is developed, integrating resource efficiency, environmental performance, and socio-economic value. Based on this framework, the study conducts a full-process analysis covering design, material preparation, manufacturing, post-processing, use, and recycling stages. The analysis identifies key carbon-reduction mechanisms of 3D printing, including material savings, reduced energy consumption, lightweight-enabled emission reduction, and distributed manufacturing. A comparative analysis of China, the European Union, and the United States reveals major constraints in China’s 3D printing sector, particularly in top-level policy design, standardization systems, legal frameworks, industrial coordination, and low-carbon core technologies. Based on these findings, the study proposes a dual-driven development pathway integrating policy optimization and technological innovation. From an institutional perspective, this pathway emphasizes green policy incentives, including strategic planning, standard setting, green finance, and collaborative governance. From a technological perspective, it highlights the importance of low-carbon material development, refined energy-efficiency management, life-cycle carbon accounting platforms, and value creation across the product life cycle. Overall, the study demonstrates that effective policy–technology synergy is essential for transforming theoretical carbon-reduction potential into scalable and practical outcomes, providing a systematic analytical framework for academic research and actionable guidance for policymakers and industry stakeholders. Full article

Betaphycus gelatinus, a member of the Eucheumatoideae, serves as the primary source for carrageenan extraction and has significant economic value. The growth and reproduction of B. gelatinus are significantly impacted by seasonal fluctuations in seawater temperature. To explore its adaptive mechanisms under temperature stress, we cultured the algae at 15 °C (Low temperature, LT), 27 °C (Medium temperature, MT), and 36 °C (High temperature, HT) for 2 h and conducted subsequent physiological, transcriptomics, and metabolomics analyses. The photosynthetic performance of B. gelatinus significantly declined under both LT and HT stress conditions. Carotenoid content increased significantly under LT conditions, while chlorophyll a showed no significant change. Phycocyanin and phycoerythrin decreased significantly under LT conditions, but there was no significant difference under HT conditions. Under LT stress, glutathione (GSH) levels, ascorbate peroxidase (APX) activity, and catalase (CAT) activity all increased significantly. Under HT stress, APX and CAT activities increased significantly, while superoxide dismutase (SOD) activity and malondialdehyde (MDA) levels remained unchanged. Transcriptomics and metabolomics analyses suggested that photosynthesis, carbohydrate metabolism, amino acid biosynthesis, porphyrin metabolism, and vitamin B6 metabolism are involved in the acute temperature stress response of B. gelatinus. Under both HT and LT, most genes in the targeted metabolic pathways were significantly downregulated (p < 0.05), while only a few were upregulated. Specifically, in carbohydrate metabolism, only nine genes were upregulated, while all others were downregulated. Moreover, all the genes involved in photosynthesis, photosynthetic carbon fixation, arginine biosynthesis, and porphyrin metabolism were downregulated. In contrast, only four genes involved in GSH metabolism, alanine, aspartate, and glutamate metabolism, and glycine, serine, and threonine metabolism were upregulated. These results suggest that temperature stress markedly suppresses the transcription of key genes in these pathways and that the few upregulated genes in these pathways may contribute to compensatory mechanisms or regulatory network reprogramming during stress responses. These findings help clarify how B. gelatinus adapts to different temperature stresses and provide a basis for developing improved germplasm to support stable production under climate variability. Full article

As the goal of carbon peak and carbon neutrality becomes a global consensus, the circular economy is gradually evolving from an environmental concept to a core lever for national strategy and industrial transformation. To achieve green and low-carbon development, China is accelerating the construction of a circular economy system, particularly in the fields of resource recycling and utilization. Industrial waste heat, a strategically critical supplementary energy resource, performs a pivotal role in advancing the circular economy. Based on an energy technology coupling model, this study assesses the waste heat utilization potential in China and quantitatively measures its impact on energy conservation and carbon reduction. The results show that: (1) The potential of industrial waste heat in China is characterized by an inverted U-shaped trajectory. Over the near-to-medium term, the steel and power industries remain the primary contributors to waste heat utilization potential. (2) Low-grade waste heat represents the majority of utilization potential in China’s industrial sector, mainly from power generation, fuel processing, and steel manufacturing. The model results indicate that the proportion of low temperature waste heat will increase from approximately 66% in 2025 to 83% in 2060. (3) Waste heat utilization significantly influences the energy transition pathway. The findings of this study demonstrate that energy-intensive industries have the potential to reduce primary energy consumption by more than 13%. Moreover, making full use of waste heat could accelerate China’s carbon peaking target to 2028, and reduce peak carbon emissions by an estimated 5.1%. Full article

Tropical buildings face the coupled effects of four-high environmental factors, which accelerate thermal–humidity degradation, increase operational energy demands, and diminish building health attributes. This paper systematically integrates global research advancements to establish a theoretical framework for Tropical Low-Carbon Healthy Building Enclosures (TLHBEs) by linking materials, structures, and buildings across scales. It identifies three key scientific questions: (1) Establishing a multi-scale parametric design model that couples materials, structures, and architecture. (2) Elucidating experimental and simulated multi-scale equivalent relationships under the coupled effects of temperature, humidity, radiation, and salinity. (3) Design multi-objective optimization strategies balancing energy efficiency, comfort, indoor air quality, and carbon emissions. Based on this, a technical implementation pathway is proposed, integrating multi-scale unified parametric design, multi-physics testing and simulation, machine learning, and intelligent optimization technologies. This aims to achieve multi-scale parametric design, data–model fusion, interpretable decision-making, and robust performance prediction under tropical climatic conditions, providing a systematic technical solution to address the key scientific questions. This framework not only provides scientific guidance and engineering references for designing, retrofitting, and evaluating low-carbon healthy buildings in tropical regions but also aligns with China’s dual carbon goals and healthy building development strategies. Full article

The rapid commercialization of next-generation photovoltaic (PV) technologies, particularly perovskite, thin-film roll-to-roll (R2R) architectures, and tandem devices, requires robust assessment of environmental performance at the level of industrial manufacturing processes. Environmental impacts can no longer be evaluated solely at the device or module level. Although many life-cycle assessment (LCA) studies compare silicon, cadmium telluride (CdTe), copper indium gallium selenide (CIGS), and perovskite technologies, most rely on aggregated indicators and database-level inventories. Few studies systematically compile and harmonize process-level life-cycle inventories (LCIs) for the manufacturing steps that differentiate emerging industrial routes, such as solution coating, R2R processing, atomic layer deposition, low-temperature annealing, and advanced encapsulation–metallization strategies. In addition, inconsistencies in functional units, system boundaries, electricity-mix assumptions, and scale-up modeling continue to limit meaningful cross-study comparison. To address these gaps, this review (i) compiles and critically analyzes process-resolved LCIs for innovative PV manufacturing routes across laboratory, pilot, and industrial scales; (ii) quantifies sensitivity to scale-up, yield, throughput, and electricity carbon intensity; and (iii) proposes standardized methodological rules and open-access LCI templates to improve reproducibility, comparability, and integration with techno-economic and prospective LCA models. The review also synthesizes current evidence on recycling, circularity, and critical-material management. It highlights that end-of-life (EoL) benefits for emerging PV technologies are highly conditional and remain less mature than for crystalline-silicon systems. By shifting the analytical focus from technology class to manufacturing process and life-cycle configuration, this work provides a harmonized evidence base to support scalable, circular, and low-carbon industrial pathways for next-generation PV technologies. Full article