Search Results (288)

This study aimed to establish an integrated variety–technology cultivation pathway for the new forage mulberry variety ‘Fengyuan No. 1’, linking salt tolerance mechanisms with practical application. A systematic investigation was conducted via a pot experiment with a 0–5‰ NaCl gradient and a field trial comparing three cultivation modes: Ridge Planting (RP), Furrow Planting (FP), and Flat-Bed Planting (FBP). Key findings are as follows. (1) The salt tolerance threshold was clearly defined: a 100% survival rate at salinity ≤ 4‰ (with no injury symptoms at ≤3‰), and 5‰ identified as the lethal threshold (33.33% survival). Salt stress triggered a resource reallocation strategy, increasing the leaf-to-stem fresh weight ratio from 1.53 (0‰) to 2.78 (5‰) to prioritize leaf photosynthetic function. Stable leaf circularity (0.83–0.87) indicated morphological stress resistance. (2) Optimized cultivation pathways were identified: FBP was the core pathway for maximizing biomass accumulation (root, stem, and leaf fresh weights were 5.0, 2.3, and 1.5 times those of RP, respectively) and resulted in the lowest leaf Na⁺ accumulation (124 mg/kg), making it suitable for lightly to moderately saline–alkali land (≤4‰). FP served as an effective pathway for salt avoidance and height promotion (plant height: 113.18 cm). RP constituted a specialized pathway for high-quality forage, yielding the highest crude protein content (23.3 g/100 g). (3) Cultivation modes significantly affected functional components; FBP activated alkaloid DNJ synthesis (215.16 mg/kg), whereas RP and FP increased osmolyte GABA accumulation (~586 mg/kg). In conclusion, this study integrates a complete technical pathway from salt tolerance mechanism analysis to diversified cultivation options, providing a systematic variety–technology solution for the industrial development of forage mulberry on coastal saline–alkali land. Full article

Global climate change has intensified land desertification in the arid and semi-arid regions of northwestern China, highlighting the urgent need to cultivate plant species with ideal architecture and well-developed root systems to combat ecosystem degradation. Amorpha fruticosa is widely used as a windbreak and sand-fixation shrub; however, its rapid growth and high transpiration during the early planting stage often result in excessive water loss, low survival rates, and limited vegetation restoration effectiveness. Plant growth retardants (PGRts) are known to suppress apical dominance and promote branching. In this study, one-year-old A. fruticosa seedlings were treated with different combinations of paclobutrazol (PP₃₃₃) and uniconazole (S₃₃₀₇) to investigate their effects on plant morphology and biomass allocation; it aims to determine the optimal formula for cultivating shrub structures with excellent windbreak and sand-fixation effects in land desertification areas. The results showed that both PP₃₃₃ and S₃₃₀₇ significantly inhibited plant height while promoting basal stem diameter, branching, and root development. Among all treatments, the S₃₃₀₇ 200 mg·L⁻¹ + PP₃₃₃ 200 mg·L⁻¹ combination (SD3) was the most effective, resulting in the greatest increases in basal diameter, branch number, total root length, and root-to-shoot ratio, while significantly reducing height increment, leaf length and leaf area (p < 0.05). Under the S₃₃₀₇ 200 mg·L⁻¹ + PP₃₃₃ 300 mg·L⁻¹ treatment (SD4), leaf width and specific leaf area were reduced by 17.92% and 38.89%, respectively, compared with the control. Correlation analysis revealed significant positive or negative relationships among most growth traits, with leaf length negatively correlated with other morphological indicators. Fresh and dry weights of both aboveground and root tissues were significantly positively correlated with basal diameter (R = 0.38) and branch basal diameter (R = 0.33). Principal component analysis demonstrated that the SD3 treatment achieved the highest comprehensive score (2.91), indicating its superiority in promoting a compact yet robust plant architecture. Overall, the SD3 treatment improved drought resistance and sand-fixation capacity of A. fruticosa by “dwarfing and strengthening plants while optimizing root–shoot allocation.” These findings provide theoretical support for large-scale cultivation and vegetation restoration in arid and semi-arid regions and offer a technical reference for growth regulation and windbreak and sand-fixation capacity in other xerophytic shrub species. Full article

This study determined the optimal nitrogen–phosphorus–potassium (N-P-K) ratios for maximizing growth performance in spinach (Spinacia oleracea), bok choy (Brassica rapa subsp. chinensis), and Chinese cabbage (Brassica rapa pekinensis). A response surface methodology experiment with 15 N-P-K treatments (0–1.5 g/L per nutrient) was conducted under controlled conditions. Growth parameters including plant height, biomass, leaf area, and root development were measured after four weeks and analyzed using principal component analysis and Pearson correlation analysis. Optimal ratios were species-specific: spinach achieved maximum performance with N-P-K = 2-0-2 (13.15 g fresh weight, 13.88 g total biomass), bok choy with N-P-K = 0-2-2 (2631.31 mm² leaf area, 4.42 mm stem diameter), and Chinese cabbage with N-P-K = 2-0-2 (14.14 cm height, 9883.44 mm² leaf area). High nitrogen levels were negatively correlated with root development across all species (r = −0.531 to −0.690, p < 0.05). These findings demonstrate that species-specific nutrient management strategies are essential for optimal leafy vegetable production. Balanced N-P-K ratios prevent nutrient toxicity while maximizing growth, providing evidence-based guidelines for precision fertilization in controlled environment agriculture. Full article

Catch crops play a vital role in agricultural systems by contributing to biomass production, nutrient retention, and carbon sequestration. Among these, species from the Brassicaceae family are particularly valuable due to their rapid biomass accumulation, biofumigant properties, and adaptability to diverse environmental conditions. This study presents the first systematic evaluation of biomass characteristics for six non-traditional Brassicaceae species under Central European conditions, alongside commonly cultivated representatives of the family. Field experiments were conducted in Eastern Bohemia from 2021 to 2023 to assess biomass production in nine Brassicaceae species. Four sowing dates were evaluated, with plant sampling determining aboveground and underground biomass. The results revealed significant species-specific differences in biomass accumulation. Sinapis alba and Raphanus sativus exhibited the highest biomass, while Brassica napus and Crambe abyssinica had the lowest. A positive correlation between aboveground and underground biomass was observed across species, though root-to-shoot ratios varied, influencing carbon allocation patterns and soil organic matter inputs. Overall, the results demonstrate that sowing date is a critical factor influencing growth dynamics and reproductive development in these underutilized Brassicaceae species. By identifying optimal planting windows, this study contributes to improved management strategies aimed at maximizing biomass production while supporting sustainable cropping practices, including enhanced soil organic carbon stabilization and reduced nutrient losses. Full article

The agroforestry system, which integrates the strategic intercropping of trees and grasses, is profoundly shaped by complex ecological interactions that dynamically reshape microclimatic environments and significantly impact the growth of understory forage species. Wolfberry–forage intercropping patterns have the potential to improve soil quality and orchard productivity, but their effects on forage cover crops are still unclear. Therefore, this study selects wolfberry and nine forage grass as research subjects to examine the effects of intercropping these species on the morphological characteristics, yield, quality, photosynthetic capacity, and plant physiology of forage grass. Based on experimental data, cover cropping facilitated plant growth, maintained fruit yield, and promoted leaf photosynthesis in forage compared with monocropping. This was exemplified by a notable increase in forage plants under the intercropping system, for the number of primary branches or tillers, and an improvement in the drying ratio of forage grasses, while reducing plant height, leaf-to-stem ratio, and photosynthetic rate (p < 0.05). Furthermore, the intercropping system significantly enhances the dry weight yield of alfalfa, ryegrass, and mangold, with increases of 60%, 64%, and 70%, respectively (p < 0.05). Additionally, it improves forage quality by increasing the crude protein content in ryegrass and mangold by 32% and 10%, respectively, and decreasing acid detergent fiber content by 10% and 18% (p < 0.05). Collectively, the results indicated that mangold, ryegrass, and alfalfa were the optimal cover crops for sustainable wolfberry production in the study area. The use of appropriate wolfberry–forage cover crops enhanced hay yield and the quality of forage by stimulating photosynthetic capacity and biotic stress resistance. Our research elucidates the mechanisms underlying the effects of intercropping systems on forage grass growth, aiming to provide a scientific basis for the development of animal husbandry and the rational utilization of land resources in the Ningxia region. Full article

The utilization of proper fermentation techniques is a widely recognized, efficacious approach in animal husbandry for enhancing the feed quality. However, research on vegetable waste, particularly that of roots, stems, leaves, fruits, and peels, has been rarely reported. To this end, the present study was carried out to examine the impact of vegetable leaf fermentation on growth performance, immune function, antioxidant levels, intestinal morphology, and microbial composition in sheep. Fifty-four male sheep (Oula) with an average age of 6 months and an average body weight of (21.53 ± 2.03) kg were randomly divided into three treatment groups, with six replicates each. The groups were fed with a basal diet (CON), 30% commercial fermented concentrate (CFC), and 30% vegetable leaf fermented concentrate (VFC). The results showed that compared to the CON group, both the commercial fermented concentrate and the vegetable leaf fermented concentrate improved the final weight (8.93%), average daily gain (30.67%), and dry matter intake of the sheep (1.62%). VFC increased the serum T-AOC (34.45%) and significantly increased the activities of serum and liver GSH-PX (10.95%). Meanwhile, the addition of vegetable leaf fermented concentrate increased the levels of serum IgA (63.21%), IgG (73.06%), and IgM (69.41%). VFC increased the villus height of the jejunum by 87.4% and the ileum by 185.5% and improved the villus height/crypt depth (V/C) ratio of the duodenum and ileum. CFC can also increase the villus height of the duodenum and jejunum, but has no effect on the morphology of the ileum. In addition to its other regulatory effects, VFC can further improve the richness and diversity of the rumen microbial community in sheep, with a notable enhancement in the relative abundance of key phyla, including Bacteroidetes, Ascomycota, Zygomycota, Chytridiomycota, and Basidiomycota. At the same time, the relative abundance of Succinivibrio was reduced. It can thus be concluded that the vegetable leaf fermented concentrate improves the growth performance and intestinal health of sheep. Full article

This study selected Abutilon theophrasti Medicus as the research object and optimized the ultrasonic-assisted heat reflux extraction process using response surface methodology to achieve efficient extraction of phenolic acids from its leaves. The optimized conditions were as follows: methanol was used as the extraction solvent, with a liquid–solid ratio of 30:1 (mL/g), ultrasonic power of 200 W, ultrasonic time of 30 min, and reflux temperature of 70 °C. Under these conditions, the extraction yield of total phenolic acid reached 213.29 μg/g, which significantly higher than those obtained using traditional extraction methods. Subsequently, six phenolic acid compounds, gallic acid, protocatechuic acid, chlorogenic acid, vanillic acid, syringic acid, and p-hydroxybenzoic acid, were successfully separated and identified from the leaf extract. Meanwhile, the phenolic acid contents in the roots, stems, and leaves of A. theophrasti were analyzed by HPLC method. The results showed that the phenolic acid content in the leaves was significantly higher than in the roots and stems. Furthermore, the antioxidant and antibacterial activities of extracts obtained from different plant parts, and those of the six separated phenolic acids, were systematically evaluated. The results demonstrated that all the samples exhibited notable antioxidant and antibacterial activities. Among them, gallic acid, protocatechuic acid, syringic acid, and vanillic acid displayed strong antioxidant activity, while gallic acid and vanillic acid showed the highest antibacterial efficacy. Full article

In order to develop a new environmentally friendly microbial herbicide for the field of weed control, this study used the metabolite butyl hydroxybenzoate (BP) of the HY-02 strain of Alternaria as the research object. The BP emulsion formula was determined to be a mixture of BP, methanol, and Tween-20 in a ratio of 1:1:2 g/mL. The seed germination inhibition effect, the phytotoxicity of living plants, crop safety, and the field effect of the emulsion were studied. Research has found that adding 0.75% BP emulsion to the seed culture medium inhibits the germination of weed seeds such as Amaranthus retroflexus L., Malva verticillata L. var., and Chenopodium album L. While Brassica campestris L. seeds were unaffected, Triticum aestivum L and Hordeum vulgare L. stem and leaf growth were inhibited. Cucumis sativus L., Lactuca sativa L. var. asparagina, Spinacia oleracea L., and Capsicum annuum L. seeds are significantly inhibited, with germination rates below 20%. We sprayed 0.75% BP emulsion onto live potted plants; among the weeds, the incidence of Amaranthus retroflexus L., Lepyrodiclis holosteoides, Thlaspi arvense L, Galium spurium L., Malva verticillata L. var. Crispa, Chenopodium album L., and Avena fatua L reached 100%. The Pisum sativum L. and Triticum aestivum L. crops were not affected (NS), and they had slight plant height inhibition and slight susceptibility (LS) to highland Hordeum vulgare L. and peppers. They were highly phytotoxicity to Cucumis sativus L. and Spinacia oleracea L. Some plant leaves became infected and died, with incidences of 85% and 82%, respectively. The field experiment showed that after diluting the BP emulsifiable concentrate, the seedling stage spray was inoculated into the Triticum aestivum L. field, and it was found that the BP emulsifiable concentrate at the concentration of 1.00%~0.75% had a herbicidal effect on weeds such as Chenopodium album L., Elsholtzia densa Benth, and Amaranthus retroflexus L. in the Triticum aestivum L. field, and it was safe for Triticum aestivum L. crops in the field. These results indicate that BP emulsion could be developed into a new environmentally friendly microbial herbicide for field application in grass (Triticum aestivum L. and Hordeum vulgare L.) crops. At the same time, BP’s excellent antibacterial, low-toxicity, hydrolysis, and other effects can promote diversification in herbicide development. Full article

Heavy metal pollutants and organic contaminants often co-exist in the environment, posing significant ecological risks due to their combined toxicity. Phytoremediation, a plant-based biotechnology, offers a promising solution for pollutant removal. This study investigated the potential cadmium (Cd) removal capacity of Narrow Crown Black-Cathay poplar (Populus × canadensis Moench × Populus simonii Carr. f. fastigiata Schneid.) under combined Cd-phenol stress. The results showed that the combined stress synergistically inhibited the photosynthetic physiological characteristics, with an inhibition rate up to 54.0%, significantly higher than that under single stress (p < 0.05). Cd accumulation varied markedly among plant organs, following the order: root (ranging from 4000.2 to 9277.0 mg/kg) > stems (ranging from 96.0 to 383.6 mg/kg) > leaf (ranging from 10.3 to 40.1 mg/kg). Phenol enhanced Cd absorption and enrichment in the roots by up to 1.8 times but reduced its translocation to aboveground parts by 37.8–40.0%. Notably, at low Cd concentrations, the Cd removal efficiency under combined stress (26.0%) was substantially higher than under single Cd stress (6.6%). In contrast, biomass, tolerance index, and root–shoot ratio were slightly affected in all treatments (p > 0.05). These findings demonstrate that Narrow Crown Black-Cathay poplar is a suitable candidate for the short-term remediation of Cd in environments co-contaminated with cadmium and phenol. Full article

Horticultural research into the group of plants known as cycads has been deficient, and this includes the study of root growth and function. The form of nitrogen (N) available to plants is known to influence root growth and morphology. The response of cycad roots to N has not been studied to date. Cycas revoluta and Cycas edentata seedlings were grown in hydroponic culture and provided urea, nitrate, or ammonium forms of N. Solutions with all three forms of N increased root growth and branching when compared with nutrient solution devoid of N, with ammonium eliciting the greatest increases. Ammonium increased lateral root length 210% for C. revoluta and 164% for C. edentata. Ammonium decreased specific root length 38% for C. revoluta and 39% for C. edentata. The influence of the N source on stem and leaf growth was minimal. Ammonium increased the root-to-shoot ratio 15% for C. revoluta and 51% for C. edentata, but urea and nitrate did not influence this plant trait. A mixture of nitrate and ammonium generated plant responses that were no different from ammonium alone. The plants supplied with N in the solution produced coralloid root growth that was 14% of the no-N plants for C. revoluta and 22% of the no-N plants for C. edentata. This initial determination of the cycad plant response to the N form indicated that root plasticity was considerable and ammonium stimulated root growth more so than urea or nitrate. Long-term growth studies in mineral soils and nursery container medium are needed to determine if these findings from the hydroponic culture of small seedlings translate to general recommendations for the preferential use of ammonium for cycad culture. Full article

(1) Background: Medicinal plants are widely used in folk medicine. Hypericum perforatum L. (St. John’s wort) is a medicinal plant that is used domestically and exported to other countries. This study addresses the need to develop methods for determining the composition and content of St. John’s wort to determine its biological activity. (2) Methods: High-performance liquid chromatography (HPLC) equipped with an Electrochemical Detector (ECD) and a Photodiode Array Detector (PDA) was employed to identify and quantify major phenolic compounds—gallic acid, catechin, epicatechin, hyperoside, quercetin, and hyperforin—in extracted and lyophilized St. John’s wort flower; stem; and leaf samples. Key analytes exhibited linear responses across both detection systems, within a quantification range of 0.5–10 µg/mL. (3) Results: The PDA method, validated according to ICH Q2(R1) guidelines, demonstrated specificity, linearity, precision, and accuracy, with limits of detection (LOD) ranging from 0.24 to 0.61 µg/mL and limits of quantification (LOQ) between 0.26 and 0.62 µg/mL. PDA effectively identified gallic acid, epicatechin, hyperoside, quercetin, and hyperforin, although catechin was not detected. ECD yielded comparable compound levels across the samples. (4) Conclusions: The novelty of this study lies in identifying the influence of climatic factors associated with the altitude at which St. John’s wort is grown on the content and ratio of biologically active components. Overall, the chemometric approach demonstrates the utility of raw chromatographic data in distinguishing samples by plant part and geographic origin; even when traditional compound-based comparisons may be limited. Full article

Breeding improvement in alfalfa (Medicago sativa L.) is often constrained by the complexity of agronomic traits and trade-offs among yield-related characteristics. Conventional single-trait selection rarely captures the full range of phenotypic variation or the interactions among traits. To address this, we developed a principal component analysis (PCA)-based framework for multivariate selection in hybrid breeding. Six yield-related traits—plant height, branch number, fresh/hay yield ratio (FHR), leaf/stem ratio (LSR), multifoliolate leaf frequency, and dry weight per plant—were quantified in two parental lines and their F₁/F₂ generations. PCA identified three principal components (PC1–PC3) with eigenvalues >1, explaining 71.14% of the total phenotypic variance: PC1 (32.43% variance) was predominantly loaded with positive contributions from dry weight per single plant, height, and branches, biologically representing overall plant vigor and biomass accumulation; PC2 (21.77% variance) showed strong negative loadings for LSR, capturing architectural trade-offs between stem dominance and leaf production; PC3 (16.94% variance) had positive loadings on multifoliolate leaf rate and fresh/dry ratio, embodying quality and physiological resilience traits. Based on PCA scores, a composite selection index was constructed, and the top 31.1% of F1 hybrids were selected. Their F₂ progeny showed significant improvements in dry weight (+15.56%, p < 0.01), multifoliolate leaf frequency (+74.78%, p < 0.001), and reduced FHR (–8.2%, p < 0.05), accompanied by lower yield decline (−7.2% versus −14.1% in controls). These results show that PCA-based multivariate selection effectively balances trait trade-offs, enhances intergenerational stability, and improves selection efficiency. This framework offers a practical tool for alfalfa breeding. Full article

Populus species are highly susceptible to wetwood formation, which adversely affects tree growth, timber quality, and wood processing. In this study, 28 aerobic and 7 anaerobic bacterial strains were isolated and purified from I-69 poplar trees infected with wetwood using tissue-based pathogen isolation techniques. Preliminary screening identified three highly pathogenic isolates, including two aerobic strains (AB4 and AB14) and one anaerobic strain (ANAB1), all of which induced wetwood symptoms in 100% of inoculated seedlings with pronounced severity. Through comprehensive characterization, including morphological analysis, physiological–biochemical profiling, and 16S rRNA gene sequencing, these strains were taxonomically classified as Pantoea agglomerans (AB4), Escherichia fergusonii (AB14), and Enterobacter hormaechei (ANAB1). These 35 strains were subsequently inoculated into one-year-old healthy poplar seedlings through three distinct methods, including stem injection, root infection, and leaf infection. Experimental results demonstrated that only stem injection successfully induced wetwood symptoms, while root and leaf infection failed to produce pathological manifestations. For stem-inoculated specimens, pathogenicity was evaluated based on three diagnostic parameters, including heartwood discoloration length, pigmentation intensity, and affected tissue area ratio. Significant variability in symptom severity was observed among different bacterial strains. These findings expand the known diversity of bacterial species associated with wetwood development and provide valuable insights for understanding its etiology and for guiding future disease management strategies. Full article

The palo prieto (Lysiloma divaricata) is a tree with grayish bark and pinnate leaves that is native to Mexico. This tree can reach heights close to 15 m and is a source of phytochemical compounds, including polyphenols. The optimized extraction method is important for preserving phytochemical compounds, particularly gallic acid. In general, solid-liquid extraction methods are the most commonly used methods for obtaining phytochemical compounds from Lysiloma divaricata. Herein, we report the results of a complex experimental design in which different parts of the plant (leaf, stem, and fruit) were used to investigate their antioxidant activities and gallic acid contents. In this design, we included variations in the type of solvent, time, and temperature. This method yields an extract rich in phytochemical components that may exhibit significant antioxidant activity, making it suitable for isolating natural antioxidant compounds. For these compounds, bromatological analysis, quantification of phenolic content, and identification and quantification of phytochemical compounds via UPLC-MS/MS identified 27 compounds, with gallic epicatechin, catechin, kaemferol-3-glucoside, procyanidin B1, and gallic acid as the major compounds. For the quantification of gallic acid by HPLC, the highest concentration of gallic acid was detected in the water-leaf-40 °C-90 min fraction. In addition, antioxidant activity via 1,1-diphenyl-1,2-picrylhydrazyl (DPPH), 2,2-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and ferric reducing antioxidant power (FRAP) was studied, and color measurements were performed. Additionally, the antioxidant activity of the fruit samples was evaluated via the DPPH method with an ethanol/water ratio of 30:70 % v/v at 60 °C for 60 min, which resulted in the highest percentage of inhibition. There was no significant difference in the antioxidant activity when ABTS was used between the samples. For the antioxidant activity determined via FRAP, the leaf sample exhibited the most significant activity when ethanol was used as the solvent at 50 °C for 90 min, with a value of 195,861 ± 44.20 µM eq Trolox/g DM. The phenol compounds of Lysiloma divaricata are promising sources of natural antimicrobials and antioxidants for potential applications in food packaging. Full article

Indonesia has 13.43 million hectares of tropical peatlands, the largest in Southeast Asia, which are crucial for carbon sequestration. This function is influenced by vegetation nutrient content, particularly carbon (C), nitrogen (N), phosphorus (P), and potassium (K), which regulate biogeochemical cycles and peat formation. This study analyzed stoichiometric profiles of tree species in South Sumatra peatlands based on (1) C:N ratios across roots, stems, twigs, and leaves, and identified species with traits associated with high carbon sequestration potential, and (2) leaf N:P:K stoichiometry to infer nutrient limitations. Research was conducted in a 1-hectare primary peatland plot within the PT. Tri Pupa Jaya conservation area. C, N, P, and K contents were measured using Kjeldahl distillation, spectrophotometry, flame photometry, and the Walkley–Black method following acid digestion. Stoichiometric distribution was visualized with violin-box plots and species grouped through hierarchical clustering. Among 153 identified species, stems showed the highest mean C:N ratio (314.9 ± 210.8), while leaves had the lowest (29.7 ± 13.0). Species were grouped into three clusters by C:N ratios across four organs, with six in clusters 1 and 2 showing high carbon sequestration potential. Leaf N:P:K stoichiometry suggested nitrogen, phosphorus, or combined N + P limitations. Full article