Search Results (323)

Landfills serve as a primary disposal method for municipal solid waste in China, with over 20,000 operational sites nationwide; however, long-term operations risk leachate leakage and groundwater contamination. Amid intensifying climate change and human activities, understanding contaminant evolution mechanisms in landfills has become critically urgent. Focusing on a representative plain-based landfill in North China, this study integrated field investigations and groundwater monitoring to establish a monthly coupled groundwater flow–solute transport model (using MODFLOW and MT3DMS codes) based on site-specific hydrogeological boundaries and multi-year monitoring data, analyzing spatiotemporal plume evolution under the coupled impacts of precipitation variability (climate change) and intensive groundwater extraction (human activities), spanning the historical period (2021–2024) and future projections (2025–2040). Historical simulations demonstrated robust model performance with satisfactory calibration against observed water levels and chloride concentrations, revealing that the current contamination plume exhibits a distinct distribution beneath the site. Future projections indicate nonlinear concentration increases: in the plume core zone, concentrations rise with precipitation, whereas at the advancing front, concentrations escalate with extraction intensity. Spatially, high-risk zones (>200 mg/L) emerge earlier under wetter conditions—under the baseline scenario (S0), such zones form by 2033 and exceed site boundaries by 2037. Plume expansion scales positively with extraction intensity, reaching its maximum advancement and coverage under the high-extraction scenario. These findings demonstrate dual drivers—precipitation accelerates contaminant accumulation through enhanced leaching, while groundwater extraction promotes plume expansion via heightened hydraulic gradients. This work elucidates coupled climate–human activity impacts on landfill contamination mechanisms, proposing a transferable numerical modeling framework that provides a quantitative scientific basis for post-closure supervision, risk assessment, and regional groundwater protection strategies, thereby aligning with China’s Standard for Pollution Control on the Landfill Site of Municipal Solid Waste and the Zero-Waste City initiative. Full article

The study evaluates the long-term environmental performance of natural filtration dams for leachate treatment at a municipal solid waste landfill. Field measurements of a system operating for 24 years, equipped with natural clay-loam filtration barriers, provide empirical validation for assessing the effectiveness and durability of natural material-based treatment approaches. Hydrogeological studies, including well drilling, water sampling, and comprehensive chemical analysis, demonstrate that the cascade filtration system achieves pollutant removal efficiencies of 80–95% for major contaminants. Physical property measurements reveal progressive density reduction from 1005 to 994 kg/m³ and viscosity decreases from 1.048 to 1.011 cSt across the treatment system. Numerical simulations demonstrate that contaminant transport under actual site conditions remains diffusion-dominated over multi-decadal timescales, with aquifer concentrations remaining below 1% of source values after 50 years. Parametric studies reveal that density-driven convective fingering develops only at source concentrations exceeding 100 g/L. The findings validate the long-term viability of natural geological barriers combined with cascade filtration systems for cost-effective leachate treatment, demonstrating that preliminary treatment through natural filtration effectively suppresses gravitational instabilities and protects underlying aquifers. Full article

The limited availability of phosphorus (P) in soil poses a critical constraint on agricultural productivity, and sustainable P fertilization practices are of great importance for crop production. In this study, we developed a novel dual-function granular material (RMG) derived from red mud, a waste residue from the aluminum industry. This material is capable of adsorbing P in P-rich soils and releasing P in P-deficient soils, thereby enabling the sustainable use of red mud and P fertilizer. The influences of RMG on the migration and transformation of P in soil were investigated. Application of RMG significantly increased the critical threshold for P leaching, thereby effectively mitigating P loss. In the initial stage of leaching, P in the leachate was present predominantly as particulate phosphorus, whereas molybdate-reactive P became the dominant form in later stages. With increasing RMG dosage, the pH of the leachate rose while the total phosphorus concentration declined, indicating that alkaline components in RMG promoted the adsorption and precipitation of phosphates in soil. The release behavior of P from P-enriched RMG was also examined. The results showed that the total soil P content increased progressively with higher RMG dosage and longer cultivation duration. Elevated temperature and soil moisture content were found to enhance the release and migration of P from RMG into the soil. SEM-EDS analyses revealed that released components (e.g., Ca²⁺ and Fe³⁺) from RMG formed relatively stable complexes with free phosphates. Moreover, adsorption of P onto the RMG surface further facilitated its migration and transformation within the soil. The research findings provide valuable insights for the simultaneous pollution remediation and resource utilization of red mud and phosphorus. Full article

During the recycling process of spent lithium-ion batteries (LIBs), there is a large number of fluoride ions in the leaching solution. These fluoride ions not only affect the quality of lithium products, but they also have adverse effects on the environment. Therefore, the efficient and deep removal of the characteristic pollutant fluoride ions is currently a hot topic in the field of recycling spent LIBs. In this study, a porous zirconium-based adsorbent was prepared and its adsorptive properties were characterized. Due to the excellent affinity between zirconium and fluorine, the zirconium-based adsorbent exhibited excellent adsorption performance in the leaching solution of spent lithium iron phosphate (SLFP) batteries. Under the optimal adsorption conditions, the adsorption capacity reached 113.78 mg/g, and it surpassed most commercial adsorbents. The zirconium-based adsorbent followed the Langmuir isotherm model for fluoride adsorption with correlation coefficients consistently exceeding 0.95, and exhibited pseudo-second-order kinetics, demonstrating goodness-of-fit values above 0.998. The negative Gibbs free energy change thermodynamically confirms the spontaneous nature of the adsorption process. The structure of the adsorbent before and after adsorption was characterized, and the adsorption mechanism was elaborated in detail. Furthermore, the influence of the coexistence of different anions on the adsorption of fluoride ions by zirconium-based adsorbent was studied in a real leaching solution from SLFP calcine. This study provides a feasible approach to deep defluoridation for leachate from spent LIBs, and has the advantages of simple operation and high adsorption capacity. Full article

In the face of increasingly severe water environmental pollution and energy shortages, anaerobic digestion (AD) technology has demonstrated immense potential for the resource recovery of wastewaters such as food waste leachate (FWL). However, the inherent drawback of the long experimental period required for AD severely constrains research efficiency. Existing studies often rely on either kinetic models with high interpretability or machine learning models with strong generalization capabilities, rarely integrating both. To address this, this study innovatively investigated the anaerobic co-digestion of enzyme-modified biodegradable plastics (BPs) and FWL, and constructed a novel Physics-Informed Neural Network (PINN) based on a dataset of 261 experimental observations. The results indicated that, among the three kinetic models, the Modified Gompertz model exhibited the best prediction accuracy (R² approaching 0.99), stability, and universality. Among the four machine learning models, the Artificial Neural Network (ANN) demonstrated optimal generalization ability (Test set R² = 0.958). Notably, the constructed Modified Gompertz PINN model achieved superior predictive performance (Test set R² = 0.994), reducing the Root Mean Square Error (RMSE) by 74.0% compared to the ANN model. Shapley analysis further confirmed the PINN retained strong biological rationality, indicating that the hydrolysis process significantly impacts methane production. This work provides a robust hybrid model for efficient co-digestion prediction and offers a new approach for the resource valorization of enzyme-modified BPs and FWL. Full article

Landfill leachate is highly concentrated wastewater containing non-biodegradable organic compounds and toxic substances. For this reason, advanced treatment methods are necessary for its treatment. The article discusses the possibility of treating leachate in a hybrid system combining ultrasonic pretreatment and anaerobic co-digestion with dairy wastewater in an anaerobic membrane bioreactor. Two laboratory-scale submerged anaerobic membrane reactors with a capillary module with membranes with a pore size of 0.1 μm and an effective filtration area of 0.35 m² were used in this study. An ultrasound disintegrator at 22 kHz (amplitude 14 µm) was used for leachate pretreatment. It was found that, as a result of leachate sonification (time > 10 min), the BOD₅/COD ratio in the wastewater increased from 0.1 to 0.4, and the content of dissolved organic compounds accounted for more than 40% of the total COD. Preliminary sonication of the leachate resulted in improved co-digestion efficiency in a reactor fed with conditioned leachate. A 92% reduction in organic pollutants was achieved, as well as a biogas production rate of 0.5 L biogas/g COD removed. Full article

Agricultural pollution, such as contamination from manure storage or leaking livestock buildings, often spreads through the catchment, affecting groundwater and surface water. An effective solution is the construction of permeable organic barriers. This study evaluates the efficiency of an innovative bioactive barrier in removing nitrogen compounds (NO₃⁻ and NH₄⁺) and polychlorinated biphenyls (PCBs). Two types of barriers were tested: a horizontal deposit under a manure storage point and a vertical deposit in the leachate flow path. The bioactivity of the barrier was confirmed by the presence of bacterial genes involved in nitrogen transformation and PCB degradation. Results showed a 70% reduction in NO₃⁻ (368.4 mg·L⁻¹) and 43% reduction in NH₄⁺ (42.4 mg·L⁻¹). Genetic analysis identified bacteria capable of complete denitrification, resembling Pseudomonas stutzeri. The analysis also indicated that higher summer temperatures and pH levels fostered microbial communities capable of nitrogen transformation. Cluster analysis revealed that the vertical deposit zone was crucial for nitrogen removal. Additionally, the vertical barrier achieved a 53% reduction in PCBs, with Pseudomonas aeruginosa-like bacteria identified as PCB degraders. Full article

By the time of this study, Kiteezi landfill was Uganda’s largest waste disposal site and received substantial volumes of municipal solid waste. In the present study, water (n = 36), leachates (n = 36), superficial sediments (n = 30), and Colocasia esculenta corms (n = 6) were sampled from Kiteezi landfill in the dry and wet seasons of 2022 before its tragic collapse in 2024. The physicochemical parameters (pH, electrical conductivity, temperature, and oxidation–reduction potential) and concentration of potentially toxic elements (As, Cu, Cr, Pb, and Zn) were analyzed using standard methods and inductively coupled plasma-optical emission spectrometry, respectively. Significant seasonal variations (p < 0.05) were observed for all the physicochemical parameters of water and leachates except temperature. Further, significantly higher concentrations (p < 0.05) of potentially toxic elements (PTXEs) were quantified in environmental matrices sampled during the dry season than the wet season. Arsenic and Pb concentrations in water surpassed their WHO permissible limit of 0.01 mg/L. The concentrations of PTXEs were higher in downstream samples (p < 0.05), indicating that landfill activities led to their enrichment in matrices near the facility. Ecological and pollution risk indices indicated that there is severe enrichment of Cu and Zn in the sediments, with dry season downstream samples having contamination factors and geoaccumulation indices of 539.3 and 74.7 and 8.5 and 5.6, respectively. Although ingestion of water may not cause probable health risks, consumption of Colocasia esculenta corms could lead to non-carcinogenic and cancer health risks in both children and adults (hazard indices = 0.085–189.0 and total cancer risk values of 7.33 × 10⁻⁶–4.87 × 10⁻³). These results emphasize the need that any new replacement for Kiteezi landfill should be properly planned and managed to mitigate potential environmental pollution with xenobiotics. Full article

The existence of residual ammonium in weathered crust elution-deposited rare earth ore (WREO) tailings will cause serious environmental pollution, and it is necessary to remove it from the ore body. In this work, ferric chloride was applied as the eluent, and the effects of the ferric salt concentration, liquid/solid ratio, and the eluting temperature on the ammonium removal process were investigated. The results indicated that ferric chloride demonstrated a significant capability to eliminate residual ammonium (RA) from rare earth (RE) tailings. The optimal conditions identified for this process included a ferric salt concentration of 0.06 mol/L, a liquid/solid ratio of 2:1, and a temperature of 25 °C. Under optimal conditions, the removal efficiency of RA by ferric chloride was measured at 97.47%. The NH₄⁺ concentration in the final stage leachate was determined to be 1.85 mg/L, which satisfies the environmental standards. Kinetic analysis revealed an internal diffusion-controlled elution mechanism for RA in the RE ore tailings, with a reaction order of 0.28 and an activation energy of 13.36 kJ/mol. FT-IR characterization results showed that most of the RA salts were effectively removed. This study establishes a feasible approach to remove RA from RE ore tailings, thereby laying a theoretical foundation for this process. Full article

Waste dumpsites in developing countries are primary pollution sources impacting nearby ecosystems. This study assessed seasonal changes in soils surrounding the Hulene-B landfill (Maputo, Mozambique) and evaluated the potential for surface water contamination by leachates. A total of 71 samples were collected during the rainy and dry periods and analyzed for pH, electrical conductivity (EC), organic matter (OM), and color. The contamination potential (Pbci) was determined considering the landfill’s characteristics and local hydrological context. During the dry season, soils exhibited higher EC and OM, indicating greater retention of potentially toxic elements (PTEs) and a strong tendency for accumulation. In the rainy season, leaching processes prevailed, leading to reduced EC and OM but increased potential for contaminant mobility. The Pbci values were consistently high across both periods, confirming elevated contamination risk. Overall, the Hulene-B landfill exerts a marked influence on surrounding soils and nearby surface waters, underscoring the urgent need for structural measures to control leachate release and ash dispersion. Full article

The dual assessment of environmental risks and energy consumption of solid waste is crucial for ensuring environmental safety and energy consumption management. Using risk assessment tools to inform best management practices for reclamation is very important. In this paper, a former Extended Environmental Multimedia Modeling System (EEMMS) combined with the Monte Carlo Method (MCM) of risk assessment was further used for exploring the fate and migration of pollutant leakage in the CFSWMA landfill. Specifically, MODFLOW combined with the EEMMS–MCM system has been applied using Biochemical Oxygen Demand (BOD) as a typical indicator to model the behavior of leachate components. An EEMMS–MCM integrated risk assessment for a 20-year period was conducted. The case study of BOD emissions from the CFSWMA landfill shows that even the leachate did not have a serious impact on Canadian territory during the 20 years; however, non-sorption chemicals are mainly affected by the groundwater flow, whereas sorption chemicals are affected by the partition coefficient (or sorption). Further, this study introduces energy consumption factors such as soil and surface water bodies, and constructs an integrated dual assessment framework for the environmental risks and energy consumption of pollutants. In summary, by integrating the EEMMS pollutant migration model with an environmental risk and energy consumption assessment, a dual assessment of environmental risks and energy consumption is achieved. Full article

This study couples a carbon quantum dot photocatalyst with a proton relay installed (EDTA-CQDs) for efficient hydrogen peroxide (H₂O₂) production with an ozone (O₃) system. In situ activation of O₃ is achieved by the photogenerated H₂O₂, which integrates the photocatalytic hydrogen peroxide production (PHP) and advanced oxidation processes (AOPs) to form a new photocatalytic peroxone (H₂O₂/O₃) system, achieving highly efficient solar-driven degradation of recalcitrant organic pollutants in landfill leachate without the addition of external H₂O₂. The composite system exhibits efficient degradation ability for various typical pollutants in landfill leachate, among which the degradation percentage of 100 mg L⁻¹ hydroquinone (HQ) reaches 97% within 30 min. This is due to the synergistic effects of O₃ oxidation, photoactivation of O₃, activation of O₃ by EDTA-CQDs, and activation of O₃ by in situ-generated H₂O₂. In the EDTA-CQD-based H₂O₂/O₃ system, free radicals can be dynamically regenerated after the addition of pollutants, achieving sustained and efficient degradation. Therefore, in the treatment of actual leachate, the removal percentages of COD, TOC, and UV254 are nearly 90%, 70%, and 55%, respectively, demonstrating the significant advantage of this system in treating high-concentration recalcitrant organic pollutants in wastewater of complex quality. Full article

(1) Background: A bioplastic poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is used in agriculture and in other applications like shopping bags, toys, and containers. Since the production of bio-based plastics, including PHBV-based materials, is expected to increase within the next few years, they are prone to becoming ubiquitous pollutants of the soil compartment. (2) Methods: An innovative PHBV-based plastic material was tested for its effect on higher plants and earthworms at the community level in a small-terrestrial model ecosystem (STME). The leachates obtained from PHBV-based plastic were studied with the use of ecotoxicological tests with regard to their impact on the early stages of the growth of higher plants and with the use of LC/MS toward the identification of the released chemical compounds. (3) Results: PHBV-based plastic microparticles at the relatively high but environmentally relevant concentration of 2.5% w/w neither affected the germination of higher plants nor inhibited their growth. The synthesis of chlorophyll and the C:N ratio in the plant biomass did not deteriorate, but the content of dry matter of the plant biomass was reduced at a statistically significant level. PHBV-based microplastics did not contribute to the mortality of Eisenia andrei, whereas they affected the depth distribution of these earthworms in the soil. Their downward movement indicated the avoidance behaviour under unfavourable living conditions. In the leachates from PHBV-based bioplastic, lactic acid and glycerol triacetate, commonly used plastic additives, were identified. These leachates did not inhibit the germination and the early stages of growth of higher plants. (4) Conclusions: PHBV-based bioplastic was studied at a concentration not higher than 2.5% w/w, and its leachates do not pose a threat to soil biota and should not affect the sustainability of the terrestrial ecosystem. Full article

This study compared the effectiveness of the Sequencing Batch Biofilter Granular Reactor (SBBGR) plant with and without the integration of ozone (BIO-CHEM process) in the remediation of medium-aged landfill leachate. Special attention is given to the removal of per- and polyfluoroalkyl substances (PFAS) as a group of bioaccumulative and persistent pollutants. The findings highlight the high SBBGR performance under biological process only for key wastewater contaminants, with 82% for chemical oxygen demand (COD), 86% for total nitrogen, and 98% for ammonia. Moderate removal was observed for total (TSS) and volatile (VSS) suspended solids (41% and 44%, respectively), while phosphorus and colour removal remained limited. Remarkably, the SBBGR process achieved complete removal of long-chain PFAS, while its performance declined for shorter-chain PFAS. BIO-CHEM process significantly improved COD (87.7%), TSS (84.6%), VSS (86.7%), and colour (92–96%) removal. Conversely, ozonation led to an unexpected increase in the concentrations of several PFAS in the effluent, suggesting ozone-induced desorption from the biomass. SBBGR treatment was characterised by a low specific sludge production (SSP) value, i.e., 5–6 times less than that of conventional biological processes. SSP was further reduced during the application of the BIO-CHEM process. A key finding of this study is a critical challenge for PFAS removal in this combined treatment approach, different from other ozone-based methods. Full article

Highly alkaline and highly toxic red mud and other bulk industrial solid wastes become severely accumulated, posing huge risks such as soil degradation and environmental pollution. It is urgent to develop a long-term and stable resource disposal method. In the present research, artificial lightweight aggregates were fabricated utilizing industrial solid residues including red mud, phosphate tailing powder, and fly ash as raw materials. The physical characteristics, microstructure, heavy metal leaching attributes, and freeze–thaw resistance under different mixed water and curing conditions were studied. The results showed that, under the optimal curing condition (steam curing temperature of 80 °C and curing time of 10 h), lightweight aggregates exhibited the best comprehensive performance, with favorable trends in bulk density, apparent density, softening coefficient, and 1 h water absorption. In addition, the impact of extending the curing time on the further enhancement of the cylinder crush strength is limited. The microscopic morphology study showed that the hydration products in lightweight aggregates are primarily N-A-S-H and C-(A)-S-H, forming a strong colloidal structure and evenly dispersed on the particle surface, thereby improving its strength. Moreover, the heavy metal leachates (Cr, Pb, As, Cu, and Ni) from the lightweight aggregates met the environmental discharge criteria for non-hazardous substances. Full article