Search Results (25)

This paper introduces a theoretical large-scale radio channel model for the downlink in cellular systems, aimed at estimating variations in received signal power at the user terminal as a function of device mobility. This enables applications such as direction-of-arrival (DoA) estimation, estimating power at subsequent points based on received power, and detection of coverage anomalies. The model is validated using real-world measurements from urban and suburban environments, achieving a maximum estimation error of 7.6%. In contrast to conventional models like Okumura–Hata, COST-231, Third Generation Partnership Project (3GPP) stochastic models, or ray-tracing techniques, which estimate average power under static conditions, the proposed model captures power fluctuations induced by terminal movement, a factor often neglected. Although advanced techniques such as wave-domain processing with intelligent metasurfaces can also estimate DoA, this model provides a simpler, geometry-driven approach based on empirical traces. While it does not incorporate infrastructure-specific characteristics or inter-cell interference, it remains a practical solution for scenarios with limited information or computational resources. Full article

Optical metasurfaces enable compact, lightweight and planar optical devices. Their performances, however, are still limited by design approximations imposed by their macroscopic dimensions. To address this problem, we propose a neural network-based multi-stage gradient optimization method to efficiently modulate nonlocal interactions between meta-atoms, which is one of the major effects neglected by current design methods. Our strategy allows for the use of these interactions as an additional design dimension to enhance the performance of metasurfaces and can be used to optimize large-scale metasurfaces with multiple parameters. As an example of application, we design a meta-hologram with a zero-order energy suppressed to 26% (theoretically) and 57% (experimentally) of its original value. Our results suggest that neural networks can be used as a powerful design tool for the next generation of high-performance metasurfaces with complex functionalities. Full article

Metasurface display, a kind of unique imaging technique with subwavelength scale, plays a key role in data storage, information processing, and optical imaging due to the superior performance of high resolution, miniaturization, and integration. Recent works about grayscale imaging as a typical metasurface display have showcased an excellent performance for optical integrated devices in the near field. However, chiral grayscale imaging has been rarely elucidated, especially using a single structure. Here, a novel method is proposed to display a continuously chiral grayscale imaging that is adjusted by a metasurface consisting of a single chiral structure with optimized geometric parameters. The simulation results show that the incident light can be nearly converted into its cross-polarized reflection when the chiral structural variable parameters are α = 80° and β = 45°. The versatile metasurface can arbitrarily and independently realize the spin-selective manipulation of wavelength and amplitude of circularly polarized light. Due to the excellent manipulation ability of the versatile metasurface, a kind of circularly polarized light detection and a two-channel encoded display with different operating wavelengths are presented. More importantly, this versatile metasurface can also be used to show high-resolution chiral grayscale imaging, which distinguishes it from the results of previous grayscale imaging studies about linearly polarized incident illumination. The proposed versatile metasurface of spin-selective manipulation, with the advantages of high resolution, large capacity, and monolithic integration, provides a novel way for polarization detection, optical display, information storage, and other relevant fields. Full article

In this paper, we propose and demonstrate a liquid crystal on silicon (LCoS) device that achieves high-efficiency, broadband, polarization-independent phase modulation by integrating a metasurface between the liquid crystal layer and the backplane of a commercial LCoS device. The metasurface is composed of rectangular silicon pillars encapsulated in silicon dioxide. By precisely adjusting the orientation and dimensions of these silicon pillars, the metasurface effectively controls the polarization state of the incident light, enabling polarization-independent phase modulation across the C+L band. Experimental results show that the polarization conversion ratio remains approximately 95% throughout the entire C+L band under varying driving voltages. Due to the low absorption characteristics of silicon and silicon dioxide, the metasurface integration introduces minimal loss. Additionally, the experimental results indicate that the reflectance of the metasurface-integrated LCoS exceeds 96% of the original LCoS reflectance. Notably, the metasurface does not affect the phase modulation characteristics of the device or exacerbate the fringing field effect, which could otherwise degrade modulation efficiency. The fabrication process for incorporating the silicon metasurface into the LCoS is fully compatible with standard semiconductor manufacturing techniques, thus facilitating the potential for large-scale production. Theoretical analysis further confirms that the design is tolerant to fabrication errors. Full article

Bessel beams occupy an important position in optical research due to their characteristics of long focal depth, self-healing ability, and diffraction-free propagation. Traditional methods for generating Bessel beams suffer from complexity, a large size, low uniformity, and limited NA. Metasurfaces are considered to be a new technology for the miniaturization of optical devices due to their ability to regulate optical fields at subwavelength scales flexibly. Here, we generated Bessel beams by a complex-amplitude (CA) metasurface. The polarization conversion efficiency was controlled by the geometric size, while the phase value from 0 to 2π was manipulated based on the Pancharatnam–Berry (PB) phase. This approach enabled precise control over the axial intensity distribution of the optical field, which facilitated the generation of sub-millimeter-scale Bessel beams. Axial light field control based on CA metasurfaces has great potential for applications in a variety of fields, such as particle manipulation, large-depth-of-field imaging, and laser processing. Full article

Orbital angular momentum beams have been extensively researched due to their ability to enhance the channel capacity of microwave systems. Metasurface near-field calculations of different sizes have been completed. Near-field calculations with Gaussian noise for metasurfaces of different sizes were also completed. The presence of noise suggests that the vortex electric field generated by the small metasurface of the vortex wave may experience disturbance and be overwhelmed by strong noise. On the other hand, the large vortex wave metasurface exhibits superior anti-noise capability. Its anti-interference characteristic was verified by conducting full-wave simulations on metasurfaces of l = −3 and l = −5. Based on the OAM spectral analysis, the mode purity of the generated vortex waves was calculated in detail. Simulation results indicated that a large-scale metasurface exhibits stronger anti-interference capability, which may inspire the design and research of vortex wave metasurfaces in the future. Full article

The complicated electromagnetic couplings between nanostructures present substantial challenges in the design and simulation of metasurfaces, especially large-scale elements. The couplings are typically neglected in a conventional simulation. We introduce a computational framework that includes the electromagnetic coupling effects between meta-atoms. Decomposing the incident field and segmenting the computing range for individual local simulations allows for an effective and accurate simulation of the entire metasurface. Numerical examples of a 2 mm diameter cylindrical metalens with a numerical aperture of 0.9 and a 1 mm aperiodic beam splitter show the deviation from the conventional method is reduced by 97% compared to the rigorous method, while the computation times are 10 times and 4 times faster than the rigorous methods, respectively. Full article

Efficient design methods for large-scale metalenses are crucial for various applications. The conventional phase-mapping method shows a weak performance under large phase gradients, thus limiting the efficiency and quality of large-scale, high-numerical-aperture metalenses. While inverse design methods can partially address this issue, existing solutions either accommodate only small-scale metalenses due to high computational demands or compromise on focusing performance. We propose an efficient large-scale design method based on an optimization approach combined with the adjoint-based method and the level-set method, which first forms a one-dimensional metalens and then extends it to two dimensions. Taking fabrication constraints into account, our optimization method for large-area metalenses with a near-unity numerical aperture (NA = 0.99) has improved the focusing efficiency from 42% to 60% in simulations compared to the conventional design method. Additionally, it has reduced the deformation of the focusing spot caused by the ultrahigh numerical aperture. This approach retains the benefits of the adjoint-based method while significantly reducing the computational burden, thereby advancing the development of large-scale metalenses design. It can also be extended to other large-scale metasurface designs. Full article

In recent years, the rapid development of dynamically tunable metasurfaces has provided a new avenue for flexible control of optical properties. This paper introduces a transmission-type electrically tunable metasurface, employing a series of subwavelength-scale silicon (Si) nanoring structures with an intermediate layer of Al₂O₃-ITO-Al₂O₃. This design allows the metasurface to induce strong Mie resonance when transverse electric (TE) waves are normally incident. When a bias voltage is applied, the interaction between light and matter is enhanced due to the formation of an electron accumulation layer at the ITO-Al₂O₃ interface, thereby altering the resonance characteristics of the metasurface. This design not only avoids the absorption loss of metal nanostructures and has a large modulation depth, but also shows compatibility with complementary metal oxide semiconductor (CMOS) technology. Full article

Efficient beam steerable high-gain antennas enable high-speed data rates over long-distance networks, including wireless backhaul, satellite communications (SATCOM), and SATCOM On-the-Move. These characteristics are essential for advancing contemporary wireless communication networks, particularly within 5G and beyond. Various beam steering solutions have been proposed in the literature, with passive beam steering mechanisms employing planar metasurfaces emerging as cost-effective, power-efficient, and compact options. These attributes make them well-suited for use in confined spaces, large-scale production and widespread distribution to meet the demands of the mass market. Utilizing a dual-band antenna terminal setup is often advantageous for full duplex communication in wireless systems. Therefore, this article presents a comprehensive review of the dual-band beam steering techniques for enabling full-duplex communication in modern wireless systems, highlighting their design methodologies, scanning mechanisms, physical characteristics, and constraints. Despite the advantages of planar metasurface-based beam steering solutions, the literature on dual-band beam steering antennas supporting full duplex communication is limited. This review article identifies research gaps and outlines future directions for developing economically feasible passive dual-band beam steering solutions for mass deployment. Full article

The use of optical systems in medical imaging, computer electronics, large-scale industries, and space exploration is common. The performance of these devices is closely related to the compactness and fast responses of lenses that are used in these optical systems. Typical lenses suffer from several key issues, including limited efficiency, significant size, and the presence of diffraction-induced distortions that compromise their overall performance. Herein these limitations are addressed by designing and simulating an ultra-thin compact metalens also known as a flat lens using a dielectric metasurface. A 1D array of 31 nano-cylinders is placed on a glass substrate that is utilized for focusing the incident wave both on and off center in the focal plane using simulations. The nano-cylinders are comprised of amorphous silicon hydrogenated (a-Si:H), which has a varying radius in a 1D configuration. Amorphous silicon hydrogenated (a-Si:H) nano-cylinders are utilized for the manipulation of the phase of the incident beam working at a frequency of 474 THz. Three metalenses are introduced with focal lengths of 7.46 $\mathsf{\mu }$m, 10 $\mathsf{\mu }$m, and 12.99 $\mathsf{\mu }$m, each having a numerical aperture (NA) of 0.7, 0.6, and 0.5, respectively. The designed single-array metalens showed a transmission efficiency of 73%. The nano-cylinders obtained a full 0–360 phase control that is beneficial in focusing the beam at the center and beyond the center. Symmetric focusing is obtained in the case of off-center focusing on both sides of the optical axis. The design and simulations of the metalens are performed using finite difference time domain (FDTD) simulation tools. Full article

A non-resonant metasurface (NRMS) concept is reported in this paper to improve the isolation of dual-polarized and wideband large-scale antenna arrays. By properly designing the NRMS, it can perform stable negative permeability and positive permittivity along the tangential direction of the NRMS within a wide band, which can be fully employed to suppress the mutual couplings of large-scale antenna arrays. At the same time, the proposed NRMS can also result in positive permittivity and permeability along the normal direction of the NRMS, which guarantees the free propagation of electromagnetic waves from antenna arrays along the normal direction. For demonstration, a 4×4 dual-polarized antenna array loading with the proposed NRMS is designed to improve the isolations of the antenna array. The simulations demonstrate that the isolations among all ports are over 24 dB from 4.36 to 4.94 GHz, which are experimentally verified by the measured results. Moreover, the radiation patterns of antenna elements are still maintained after leveraging the proposed NRMS. Due to the simple structure of the proposed NRMS, it is very promising to be widely employed for massive MIMO antenna arrays. Full article

Multifunctional terahertz beam manipulations have attracted much attention because of the potential for wide-scale applications in terahertz imaging, communications, etc. In this work, a grating-like terahertz reflective-type metasurface is designed for terahertz beam manipulations on the basis of a frequency-scanning mechanism. The theoretical calculation based on the grating principle has predicted that the metasurface grating can steer the deflected beam from 59.5° to 47.3° as the frequency of the perpendicularly incident terahertz wave changes between 0.87 and 1.02 THz. The large-deflection-angle frequency-scanning performance is validated by both numerical simulations and experimental tests. The metasurface grating developed in this work possesses the potential for applications in terahertz beam steering and beam-splitting devices. Full article

In recent years, technological advances in nanofabrication have opened up new applications in the field of nanophotonics. To engineer and develop novel functionalities, rigorous and efficient numerical methods are required. In parallel, tremendous advances in algorithmic differentiation, in part pushed by the intensive development of machine learning and artificial intelligence, has made possible large-scale optimization of devices with a few extra modifications of the underlying code. We present here our development of three different software libraries for solving Maxwell’s equations in various contexts: a finite element code with a high-level interface for problems commonly encountered in photonics, an implementation of the Fourier modal method for multilayered bi-periodic metasurfaces and a plane wave expansion method for the calculation of band diagrams in two-dimensional photonic crystals. All of them are endowed with automatic differentiation capabilities and we present typical inverse design examples. Full article

Energy self-sufficiency, as well as optimal management of power in buildings is gaining importance, while obtaining power from traditional fossil energy sources is becoming more and more expensive. In this context, millimeter-scale metasurfaces can be employed to harvest energy from microwave sources. They can also be used as sensors in the microwave regime for efficient power management solutions. In the current study, a simple spray printing method is proposed to develop metasurfaces in construction materials, i.e., plasterboard and wood. Such materials are used in the interior design of buildings; therefore, the implementation of metasurfaces in large areas, such as walls, doors and floors, is realized. The fabricated metasurfaces were characterized regarding their electromagnetic performance. It is hereby shown that the investigated metasurfaces exhibit an efficient electromagnetic response in the frequency range (4–7 GHz), depending on the MS. Thus, spray-printed metasurfaces integrated on construction materials can potentially be used for electromagnetic applications, for buildings’ power self-efficiency and management. Full article