Search Results (533)

Background/Objectives: Recent advancements in innovative drug delivery nanosystems have significantly impacted wound healing, particularly through the incorporation of natural products. This study aimed to develop and characterize a Phlomis crinita extract-loaded nanostructured formulation (PCE-NF) as a topical therapy for skin wounds. Methods: This study involved the incorporation of P. crinita extract in a nanoemulsion by the high-energy emulsification method. This formulation was subjected to physicochemical and biopharmaceutical characterization, and a physical stability study over 30 days. Biocompatibility, tolerability, and irritant effects were assessed, while the wound healing potential was evaluated using in vitro skin models of fibroblasts and keratinocytes. Results: PCE-NF showed a homogeneous appearance with nanometric-sized spherical droplets of 212.27 nm and Newtonian behavior. This formulation showed a sustained release of its majority component (luteonin 7-(6″-acetylglucoside)), which followed a hyperbolic kinetic while showing high permeation, through healthy human skin, with 22.01 µg after 27 h. There were no cytotoxic effects of PCE-NF with improvements in skin barrier function and hydration levels. The wound healing potential of PCE-NF at 3.125 µg/mL was evidenced by enhanced cell migration and accelerated wound closure in 3T3-L1 and HaCaT cells, with values of 94.24 and 92.41%, respectively. Conclusions: These results suggest that this formulation could be used as an effective wound healing treatment. Full article

Metal–air batteries have excellent theoretical energy density and economic advantages through abundant anode materials and open cathode structures. However, the actual energy efficiency of metal–air batteries is much lower than the theoretical value due to the effect of polarization voltage during battery operation, limiting the power output and thus hindering their practical application. This review systematically dissects the origins of polarization: slow oxygen reduction/evolution reaction (ORR/OER) kinetics, interfacial resistance, and mass transfer bottlenecks. We highlight cutting-edge strategies to mitigate polarization, including atomic-level engineering of air cathodes (e.g., single-atom catalysts, low Pt catalysts), biomass-derived 3D porous electrodes, and electrolyte innovations (additives to inhibit corrosion, solid-state electrolytes to improve stability). In addition, breakthroughs in metal–H₂O₂ battery design using concentrated liquid oxygen sources are discussed. Together, these advances alleviate the battery polarization bottleneck and pave the way for practical applications of metal–air batteries in electric vehicles, drones, and deep-sea devices. Full article

The safe exploitation of marine natural gas hydrates, a promising cleaner energy resource, is hindered by reservoir instability during drilling. The inherent temperature–pressure sensitivity and cementation of hydrate-bearing sediments leads to severe operational risks, including borehole collapse, gas invasion, and even blowouts. This review synthesizes the complex instability mechanisms and evaluates the state of the art in inhibitive, wellbore-stabilizing drilling fluids. The analysis first deconstructs the multiphysics-coupled failure process, where drilling-induced disturbances trigger a cascade of thermodynamic decomposition, kinetic-driven gas release, and geomechanical strength degradation. Subsequently, current drilling fluid strategies are critically assessed. This includes evaluating the limitations of conventional thermodynamic inhibitors (salts, alcohols, and amines) and the advancing role of kinetic inhibitors and anti-agglomerants. Innovations in wellbore reinforcement using nanomaterials and functional polymers to counteract mechanical failure are also highlighted. Finally, a forward-looking perspective is proposed, emphasizing the need for multiscale predictive models that bridge molecular interactions with macroscopic behavior. Future research should prioritize the development of “smart”, multifunctional, and green drilling fluid materials, integrated with real-time monitoring and control systems. This integrated approach is essential for unlocking the potential of marine gas hydrates safely and efficiently. Full article

Piezoelectric catalytic technology has attracted much attention in the field of dye wastewater treatment, in which inorganic piezoelectric materials have been widely studied. Its core mechanism involves utilizing the piezoelectric effect to generate positive and negative charges, which react with oxygen ions and hydroxyl radicals, respectively, to generate reactive oxygen species to degrade organic pollutants. Currently, while organic piezoelectric catalysts theoretically offer significant advantages such as low cost and high processability, there has been a notable lack of research in this area, which presents an innovative opportunity for the exploration of new organic piezoelectric catalytic materials. In this study, new research using natural nanocellulose (FC) suspension as an efficient organic piezoelectric catalyst is reported for the first time. The experimental results showed that the catalyst exhibited excellent degradation performance for Rhodamine B (RhB), Acid Orange 7 (AO7), and Methyl Orange (MO) under ultrasonic vibration (40 kHz, 200 W): the degradation rates reached 95.4%, 72.4%, and 31.2%, respectively, for 150 min, and the corresponding first-order reaction kinetic constants were 0.0205, 0.00858, and 0.00249 min⁻¹, respectively. It is noteworthy that the RhB solution can achieve the optimal degradation efficiency without adjustment under neutral initial pH conditions, which significantly enhances the practical application feasibility. The experimental results showed that the catalyst, with a measurable piezoelectric coefficient (d33 = 4.4 pm/V), exhibited excellent degradation performance for Rhodamine B (RhB), Acid Orange 7 (AO7), and Methyl Orange (MO) under ultrasonic vibration (40 kHz, 200 W). This organic piezoelectric catalyst, based on renewable biomass, innovatively converts mechanical vibration energy in the environment into the power to degrade pollutants. It not only expands the application boundaries of organic piezoelectric materials but also provides a new solution for sustainable water treatment technology, demonstrating extremely promising application prospects in the field of green and environmentally friendly water treatment. Full article

Cost-effective procedures usually cannot achieve complete removal of priority contaminants present in water at very low concentrations (as pesticides or pharmaceuticals). Advanced oxidation processes (AOPs) represent promising technologies for removing priority contaminants from water at trace concentrations, yet practical implementation remains limited due to technical and economic constraints. This study presents an innovative flow-through photodegradation device designed to overcome current limitations while achieving efficient contaminant removal at industrial scale. The device integrates a UVC 254 nm lamp-equipped flow chamber with automated dosing pumps for hydrogen peroxide and/or solid catalyst suspensions, coupled with a 30 nm porous membrane filtration system for catalyst recirculation. This configuration optimizes light–catalyst–pollutant contact while enabling combined catalytic processes. Performance evaluation using acesulfame (ACE) and iohexol (IHX) as model contaminants demonstrated rapid and effective removal. IHX degradation with UVC and 75 μM H₂O₂ achieved complete removal with t₉₅% = 7.23 ± 1.21 min (pseudo-order 0.25, t₁/₂ = 3.27 ± 0.39 min), while ACE photolysis (with UVC only) required t₉₅% = 14.88 ± 2.02 min (pseudo-order 1.27, t₁/₂ = 2.35 ± 0.84 min). The introduction of t₉₅% as a performance metric provides practical insights for near-complete contaminant removal requirements. Real-world efficacy was confirmed using tertiary wastewater treatment plant effluents containing 14 μg/L IHX, achieving complete removal within 8 min. However, carbamazepine degradation proved slower (t₉₅% > 74 h), highlighting the need for combined catalytic approaches for recalcitrant compounds. Spiking experiments (1000 μg/L) revealed concentration-dependent kinetics and synergistic effects between co-present contaminants. Analysis identified degradation byproducts consistent with previous studies, including tri-deiodinated iohexol (474.17 Da) intermediates. This scalable system, constructed from commercially available components, demonstrates potential for cost-effective industrial implementation. The modular design allows adaptation to various contaminants through adjustable AOP combinations (UV/H₂O₂, photocatalysts, ozone), representing a practical advancement toward addressing the gap between laboratory-scale photocatalytic research and full-scale water treatment applications. Full article

Opening titles are more than introductory devices supporting the film they have been produced for; they are artistic and cultural artefacts with a powerful visual identity. Among the most emblematic figures in this design field, the graphic and motion designer Saul Bass (1920–1996) pioneered an approach that redefined the identity, the design, and the experience of cinematic title sequences, opening a path of experimentation aimed at bridging visual communication, moving images, stylistic innovation, and aesthetic synaesthesia, through a combination of sound, movement, and image into a single expressive unit. This article investigates Bass’s contribution through a historical-critical and comparative lens, reconstructing the network of artistic and technological influences that shaped his design philosophy. It analyzes a selection of Bass’s title sequences, highlights his connection to European modernism, and identifies the seeds of postmodern culture in several aspects of Bass’s work such as the merging of principles coming from design and animation studies, the ambition for technological experimentation, and the openness towards a mass audience. By framing Bass’s creative legacy as a form of visual heritage, the article examines the ways in which his kinetic typography and moving compositions can be, therefore, recognized as resources for art historians, media scholars, designers, and visual communication theorists to track down the first and impactful aesthetic and narrative experiments conducted in the postmodern and contemporary motion graphic design field. Full article

This field study describes the successful implementation and evaluation of a Polymer-free Delayed Acid System, a next-generation acid retarder system that is chemically superior to traditional emulsified acid systems with an amphoteric-based surfactant. It is a polymer-free system that stimulates ultra-tight carbonate reservoirs in extreme sour and high-temperature conditions. The candidate well, located in an onshore gulf region field, for a major oil and gas company demonstrated chronically unstable production behavior for over two years, with test volumes fluctuating unpredictably between 200 and 400 barrels of oil per day. This indicated severe near-wellbore damage, high skin, and limited matrix permeability (<0.3 mD). The well was chosen for a pilot trial of the Polymer-free Delayed Acid System technology after a thorough formation study, which included mineralogical characterization and capillary diagnostics. The innovative acid retarder formulation, designed for deep matrix penetration and controlled acid–rock reaction, uses intrinsic encapsulation kinetics to significantly increase the acid’s reactivity, allowing it to bypass damaged zones, minimize acid leak-off, and initiate dominant wormhole propagation into the tight formation. The stimulation procedure began with a custom pre-flush designed to change nanoscale wettability and interfacial tension, so increasing acid displacement and assuring effective contact with the formation rock. Real-time injectivity testing and operational data collecting were performed prior to, during, and following the acid job, with pre-stimulation injectivity peaking at 1.2 bpm, indicating poor formation conductivity. Treatment with the Polymer-free Delayed Acid System resulted in a 592% increase in post-stimulation injectivity, indicating significant increases in near-wellbore permeability and successful propagation. However, a substantial operational difficulty arose: the well remained shut down for more than two months following the acid stimulation work due to surface infrastructure delays, notably the scheduling and execution of a flowline cleanup campaign. This lengthy closure slowed immediate flowback analysis and impeded direct assessment of treatment performance because production could not be tracked in real time. Despite this, once the surface system was operational and the well was open to flow, a structured production testing program was carried out over four quarterly intervals. The well regularly produced at an average stable rate of 500 bbl/day, more than doubling pre-treatment performance and demonstrating the long-term effectiveness and mechanical durability of the acid-induced wormhole network. Despite the post-job shut-in, the Polymer-free Delayed Acid System maintained the stimulating impact even under non-ideal settings, demonstrating its robustness. The Polymer-free Delayed Acid System outperforms conventional emulsified acid systems, giving better control over acid placement and reactivity, especially under severe reservoir conditions with bottomhole temperatures reaching 200 °F. This project offers a field-proven methodology that combines advanced chemical engineering, formation-specific design, and live diagnostics, as well as a scalable blueprint for unlocking hydrocarbon potential in similarly complicated, low-permeability reservoirs. Full article

The practical application of powdered photocatalysts is significantly hindered by challenges in recyclability and structural instability. This work proposes a sustainable immobilization strategy by integrating BiVO₄ nanoparticles into a sodium alginate (SA) aerogel scaffold through a facile freeze-drying approach. The abundant hydroxyl/carboxyl groups of SA enable uniform dispersion of BiVO₄ within the porous network, while the aerogel architecture enhances light-harvesting efficiency and mass transfer kinetics. Innovatively, peroxymonosulfate (PMS) was introduced to synergistically couple photocatalysis with sulfate radical-based advanced oxidation processes (SR-AOPs), where the photogenerated electrons from BiVO₄ effectively activate PMS to yield high-activity ·SO₄⁻ radicals. The optimized BiVO₄/SA aerogel achieves nearly complete removal of Rhodamine B within 2 h under visible light, which is competitive to pure BiVO₄ powders. In addition, the mechanically robust aerogel exhibits exceptional reusability, retaining ~90% efficiency after five cycles without structural collapse. This work provides a paradigm for designing recyclable photocatalyst carriers with dual oxidation pathways, demonstrating significant potential for industrial wastewater treatment. Full article

Catalytic combustion gas sensors are critical for safety and environmental monitoring, yet face persistent challenges in sensitivity and detection limits amid expanding market demands. This study innovatively employs attapulgite as a support material functionalized with noble metal catalyst Pd to fabricate a low-cost, high-sensitivity sensor. Characterization (SEM/EDS) confirms a unique Pd/attapulgite core–shell structure with engineered Pd gradient distribution (7.5–75.8 wt% from core to surface). The sensor achieves methane catalytic combustion below 300 °C, delivering 0.7 µV/ppm sensitivity and ~36 ppm detection limit. Reaction kinetics follow the Eley–Rideal mechanism, with voltage difference ($\mathsf{\Delta }\mathrm{U}$) versus methane concentration (C) conforming to the Langmuir equation ($\mathsf{\Delta }\mathrm{U}={\displaystyle \frac{{\mathrm{U}}_{\mathrm{m}\mathrm{a}\mathrm{x}}\cdot \mathrm{K}\cdot \mathrm{C}}{1+\mathrm{K}\cdot \mathrm{C}}}$, R² > 0.99, ${\mathrm{U}}_{\mathrm{m}\mathrm{a}\mathrm{x}}$ = 41.80 mV). Cost-effective fabrication and exceptional performance underscore its potential for practical deployment in industrial, residential, and environmental safety monitoring. Full article

Salvia officinalis is an aromatic plant of Mediterranean origin traditionally used to treat inflammatory, cardiovascular, endocrine, and digestive diseases. In this work, the ability of the Salvia officinalis extract in the treatment of gastric ulcers was evaluated, and an innovative administration system was proposed to increase the therapeutic effect of this plant. Salvia officinalis ethanolic extract was prepared and analyzed by HPLC/UV-DAD and encapsulated in a matrix based on gelatin and pectin using an emulsion–coacervation process. The prepared microcapsules were analyzed by laser particle size, optical microscopy, in vitro dissolution kinetics, and ex vivo bioadhesion. In order to determine the action mechanism of Salvia officinalis extract, in the treatment of gastric ulcer, the in vivo anti-ulcerogenic activity in rats, using the ulcer model induced by ethanol; the in vivo anti-Helicobacter pylori activity; and in vitro inhibitory activity of H⁺/K⁺-ATPase were carried out. These three biological activities were evaluated for ethanolic extract and microcapsules to determine the effect of formulation on biological activities. Ethanolic extract of Salvia officinalis was mainly composed of polyphenols (chlorogenic acid 7.43%, rutin 21.74%, rosmarinic acid 5.88%, and quercitrin 14.39%). Microencapsulation of this extract allowed us to obtain microcapsules of 104.2 ± 7.5 µm in diameter, an encapsulation rate of 96.57 ± 3.05%, and adequate bioadhesion. The kinetics of in vitro dissolution of the extract increase significantly after its microencapsulation. Percentages of ulcer inhibition for 100 mg/kg of extract increase from 71.71 ± 2.43% to 89.67 ± 2.54% after microencapsulation. In vitro H⁺/K⁺-ATPase-inhibiting activity resulted in an IC50 of 86.08 ± 8.69 µM/h/mg protein for free extract and 57.43 ± 5.78 µM/h/mg protein for encapsulated extract. Anti-Helicobacter pylori activity showed a similar Minimum Inhibitory Concentration (MIC) of 50 µg/mL for the extract and microcapsules. Salvia officinalis ethanolic extract has a significant efficacy for the treatment of gastric ulcer; its mechanism of action is based on its gastroprotective effect, anti-Helicobacter pylori, and H⁺/K⁺-ATPase inhibitor. Moreover, the microencapsulation of this extract increases its gastroprotective and H⁺/K⁺-ATPase-inhibiting activities significantly. Full article

Heavy metal pollution, particularly copper contamination, threatens the ecological environment and human survival. In response to this pressing environmental issue, the development of innovative remediation strategies has become imperative. Bioremediation technology is characterized by remarkable advantages, including its ecological friendliness, cost-effectiveness, and operational efficiency. In our previous research, Rossellomorea sp. ZC255 demonstrated substantial potential for environmental bioremediation applications. This study investigated the removal characteristics and underlying mechanism of strain ZC255 and revealed that the maximum removal capacity was 253.4 mg/g biomass under the optimal conditions (pH 7.0, 28 °C, and 2% inoculum). The assessment of the biosorption process followed pseudo-second-order kinetics, while the adsorption isotherm may fit well with both the Langmuir and Freundlich models. Cell surface alterations on the Cu(II)-treated biomass were observed through scanning electron microscopy (SEM). Cu(II) binding functional groups were determined via Fourier transform infrared spectroscopy (FTIR) analysis. Simultaneously, the genomic analysis of strain ZC255 identified multiple genes potentially involved in heavy metal resistance, transport, and metabolic processes. These studies highlight the significance of strain ZC255 in the context of environmental heavy metal bioremediation research and provide a basis for using strain ZC255 as a copper removal biosorbent. Full article

Biofilms, structured communities of microorganisms encased in an extracellular matrix, are a major cause of persistent infections, particularly when formed on medical devices. This study investigated the kinetics of biofilm formation by Escherichia coli and Pseudomonas aeruginosa, two clinically significant pathogens, on two medical-grade polymers: polyether ether ketone (PEEK) and polyamide 12 (PA12). Using a modified crystal violet staining method and spectrophotometric quantification, we evaluated biofilm development over time on polymer granules and catheter segments composed of these materials. Results revealed that PEEK surfaces supported significantly more biofilm formation than PA12, with peak accumulation observed at 24 h for both pathogens. Conversely, PA12 demonstrated reduced bacterial adhesion and lower biofilm biomass, suggesting surface characteristics less conducive to microbial colonization. Additionally, the study validated a reproducible protocol for assessing biofilm formation, providing a foundation for evaluating anti-biofilm strategies. While the assays were performed under static in vitro conditions, the findings highlight the importance of material selection and early prevention strategies in the design of infection-resistant medical devices. This work contributes to the understanding of how surface properties affect microbial adhesion and underscores the critical need for innovative surface modifications or coatings to mitigate biofilm-related healthcare risks. Full article

The objective of this investigation is to obtain numerical solutions for a variety of mathematical models in a wide range of disciplines, such as chemical kinetics, neurosciences, nonlinear optics, metallurgical separation/alloying processes, and asset dynamics in mathematical finance. This research features numerical simulations conducted with a remarkably low error measure, providing a visual representation of the examined models in these areas. The proposed method is the double Laplace–Adomian decomposition method, which facilitates the numerical acquisition and analysis of solutions. This paper presents the first report of numerical simulations employing this innovative methodology to address these problems. The findings are expected to benefit the natural sciences, mathematical modeling, and their practical applications, representing the innovative aspect of this article. Additionally, this method can analyze many classes of partial differential equations, whether linear or nonlinear, without the need for linearization or discretization. Full article

The production of iron and steel plays a significant role in the anthropogenic carbon footprint, accounting for 7% of global GHG emissions. In the context of CO₂ mitigation, the steelmaking industry is looking to potentially replace traditional carbon-based ironmaking processes with hydrogen-based direct reduction of iron ore in shaft furnaces. Before industrialization, detailed modeling and parametric studies were needed to determine the proper operating parameters of this promising technology. The modeling approach selected here was to complement REDUCTOR, a detailed finite-volume model of the shaft furnace, which can simulate the gas and solid flows, heat transfers and reaction kinetics throughout the reactor, with an extension that describes the whole gas circuit of the direct reduction plant, including the top gas recycling set up and the fresh hydrogen production. Innovative strategies (such as the redirection of part of the bustle gas to a cooling inlet, the use of high nitrogen content in the gas, and the introduction of a hot solid burden) were investigated, and their effects on furnace operation (gas utilization degree and total energy consumption) were studied with a constant metallization target of 94%. It has also been demonstrated that complete metallization can be achieved at little expense. These strategies can improve the thermochemical state of the furnace and lead to different energy requirements. Full article

The current work is established with the object of modifying the source of Fenton system and substituting iron source as a catalyst with magnetite/potato peels composite material (POT400-M) to be an innovative solar photocatalyst. The structural and morphological characteristics of the material are assessed through X-ray diffraction (XRD) and scanning electron microscopy (SEM). The technique is applied to treat oil spills that pollute seawater. The effectiveness of the operating parameters is studied, and numerical optimization is applied to optimize the most influential parameters on the system, including POT400-M catalyst (47 mg/L) and hydrogen peroxide reagent (372 mg/L) at pH 5.0, to maximize oil removal, reaching 93%. Also, the aqueous solution and wastewater temperature on the oxidation reaction is evaluated and the reaction exhibited an exothermic nature. Kinetic modeling is evaluated, and the reaction is found to follow the second-order kinetic model. Thermodynamic examination of the data exhibits negative enthalpy (ΔH′) values, confirming that the reaction is exothermic, and the system is verified to be able to perform at the minimal activation energy barrier (−51.34 kJ/mol). Full article