Search Results (273)

The chickpea (Cicer arietinum L.) is a key legume crop in Mediterranean agriculture, valued for its nutritional profile and adaptability. However, its productivity is severely impacted by drought stress. To identify microbial solutions that enhance drought resilience, we isolated seven Mesorhizobium strains from chickpea nodules collected in southern Spain and evaluated their cultivar-specific symbiotic performance. Two commercial cultivars (Pedrosillano and Blanco Lechoso) and twenty chickpea germplasms were tested under growth chamber and greenhouse conditions, both with and without drought stress. Initial screening in a sterile substrate using nodulation assays, shoot/root dry weight measurements, and acetylene reduction assays identified three elite strains (ISC11, ISC15, and ISC25) with superior symbiotic performance and nitrogenase activity. Greenhouse trials under reduced irrigation demonstrated that several strain–cultivar combinations significantly mitigated drought effects on plant biomass, with specific interactions (e.g., ISC25 with RR-98 or BT6-19) preserving over 70% of shoot biomass relative to controls. Whole-genome sequencing of the elite strains revealed diverse taxonomic affiliations—ISC11 as Mesorhizobium ciceri, ISC15 as Mesorhizobium mediterraneum, and ISC25 likely representing a novel species. Genome mining identified plant growth-promoting traits including ACC deaminase genes (in ISC11 and ISC25) and genes coding for auxin biosynthesis-related enzymes. Our findings highlight the potential of targeted rhizobial inoculants tailored to chickpea cultivars to improve crop performance under water-limiting conditions. Full article

In the framework of the MATIM project, an acoustic test campaign was conducted on a platform derived from a commercial-class quadcopter within the CIRA semi-anechoic chamber. A dedicated rotor rig allowed systematic measurements of thrust, torque, and shaft speed together with near- and far-field noise using ten calibrated 1/2-inch precision microphones. Three configurations were examined: an isolated rotor, the same rotor mounted on an aluminium quadcopter plate, and the full four-rotor assembly. The resulting data set, acquired over 3000–8000 rpm, documents the azimuthal directivity and radial decay of tonal and broadband noise while separating motor, propeller, and installation contributions. Analysis shows that a nearby rigid plate scatters part of the sound field towards frontal and oblique observers and produces a shielding effect in the rotor plane. The combined operation of four rotors further redistributes energy and broadens blade-passing frequency harmonics. The database is intended as a benchmark for aeroacoustics codes and for the development of reduced-order models. Full article

In modern wireless communication systems, achieving high isolation and consistent signal gain is essential for optimizing Multiple-Input Multiple-Output (MIMO) antenna performance. This study presents a metamaterial-integrated smart sensor platform featuring a hexagonal two-element MIMO antenna designed to improve isolation and directive gain. Constructed on an FR4 substrate (1.6 mm thick), the proposed antenna configurations include a base hexagonal patch, an orthogonally oriented two-element system (TEH_OC), and further enhanced variants employing metamaterial arrays as the superstrate and reflector (TEH_OC_MTS and TEH_OC_MTR). The metamaterial structures significantly suppress mutual coupling, yielding superior diversity parameters such as Envelope Correlation Coefficient (ECC), Mean Effective Gain (MEG), and Channel Capacity Loss (CCL). All configurations were fabricated and validated through comprehensive anechoic chamber measurements. The results demonstrate robust isolation and radiation performance across the 3 GHz and 5 GHz bands, making these antennas well-suited for deployment in compact, low-latency smart sensor networks operating in 5G and IoT environments. Full article

Mycogone perniciosa is the causative agent of wet bubble disease, which induces significant losses in the production of Agaricus bisporus, indicating the high importance of the development of novel inhibitory agents. The isolation, identification, and molecular characterization of five isolates of M. perniciosa from diseased fruit bodies of A. bisporus was done. Moreover, the study evaluated the in vitro and in situ potential of Origanum vulgare essential oil (EO) to limit M. perniciosa growth and provided chemical characterization of its volatile components. The obtained strains differed phenotypically and according to their molecular characteristics. O. vulgare EO has shown more promising antifungal activity than the commercial fungicide Prochloraz-Mn in the microatmospheric method. In the treatment of experimentally induced wet bubble disease on A. bisporus in the growing chambers with 2% of O. vulgare EO and simultaneous application of spore suspension of mycopathogen, O. vulgare EO totally inhibited the growth of M. perniciosa. Carvacrol, p-cymene, γ-terpinene, and thymol were dominant constituents of O. vulgare EO examined in this study. O. vulgare EO has shown promising potential to limit growth of M. perniciosa and should be further explored as a novel biofungicide. Full article

Alzheimer’s disease (AD) early screening requires non-invasive, high-sensitivity detection of low-abundance biomarkers in complex biofluids like saliva. In this study, we present a miniaturized, silicon-based electrochemical sensor for sequential detection of two AD salivary biomarkers, lactoferrin (Lf) and amyloid β-protein 1-42 (Aβ_1-42), on a single reusable electrode. The sensor features a three-electrode system fabricated by sputter-coating a quartz substrate with gold (Au) sensing electrodes, which are further modified with gold nanoparticles (AuNPs) to form 3D dendritic structures that enhance surface area and electron transfer. To improve specificity, immunomagnetic beads (MBs) are employed to selectively capture and isolate target biomarkers from saliva samples. These MB–biomarker complexes are introduced into a polydimethylsiloxane chamber aligned with Au sensing electrodes, where a detachable magnet localizes the complexes onto the electrode surface to amplify redox signals. The AuNPs/MBs sensor achieves detection limits of 2 μg/mL for Lf and 0.1 pg/mL for Aβ_1-42, outperforming commercial ELISA kits (37.5 pg/mL for Aβ_1-42) and covering physiological salivary concentrations. After the MBs capture the biomarkers, the sensor can output the result within one minute. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements confirm enhanced electron transfer kinetics on AuNP-decorated surfaces, while linear correlations (R² > 0.95) validate quantitative accuracy across biomarker ranges. The compact and integrated design eliminates reliance on bulky instrumentation and enables user-friendly operation, establishing a promising platform for portable, cost-effective AD screening and monitoring. Full article

Supercritical combustion is a promising technique for improving the efficiency and reducing the emissions of next-generation gas turbines. However, accurately modeling combustion under these conditions remains a challenge, particularly due to the complexity of chemical kinetics. This study aims to evaluate the applicability of a reduced global reaction mechanism compared to the detailed Foundational Fuel Chemistry Model 1.0 (FFCM-1) when performing hydrogen combustion with supercritical carbon dioxide and argon as diluents. Computational fluid dynamics simulations were conducted in two geometries: a simplified tube for isolating chemical effects and a combustor with cooling channels for practical evaluation. The analysis focuses on the evaluation of velocity, temperature, and the water vapor mass fraction distributions inside the combustion chamber. The results indicate good agreement between the global and detailed mechanisms, with average relative errors below 2% for supercritical argon and 4% for supercritical carbon dioxide. Both models captured key combustion behaviors, including buoyancy-driven flame asymmetry caused by the high density of supercritical fluids. The findings suggest that global chemistry models can serve as efficient tools for simulating supercritical combustion processes, making them valuable for the design and optimization of future supercritical gas turbine systems. Full article

Pediatric dentistry continually seeks effective and efficient treatments for young patients, especially within pediatric endodontics, where cooperation can often be challenging. This in vivo study aimed to evaluate the effectiveness of a novel photodynamic therapy (PDT) protocol using a 5-aminolevulinic acid gel (Aladent, ALAD) combined with light irradiation during the endodontic treatment of primary teeth. This study included primary teeth requiring root canal therapy due to carious lesions or trauma, with clinical symptoms suggesting irreversible pulpitis or acute apical periodontitis. Following local anesthesia and isolation with a rubber dam, carious lesions were excavated, and access to the pulp chamber was established. Canal preparation included determining the working length and using a sequence of k-files. Afterward, ALAD gel was applied, and the patients were divided into two groups based on their visit duration (Group A with a single visit, Group B returning after one week). Microbiological analysis was conducted on the samples taken before and after treatment. The findings demonstrated significant antibacterial efficacy of the PDT protocol in reducing root canal bacterial load, suggesting ALAD-based PDT may serve as an alternative to traditional endodontic treatment in cases where retaining primary teeth is essential for orthodontic or strategic reasons. Clinically, improvement in symptoms and fistula resolution were observed. Treatment time, patient compliance, and protocol safety in pediatric applications are also discussed, highlighting the protocol’s potential to enhance clinical outcomes in pediatric endodontics. Full article

Background and Objectives: Aortic stenosis (AS) leads to progressive left ventricular (LV) dysfunction, making early detection crucial. Global longitudinal strain (GLS) is an echocardiographic marker of subclinical LV dysfunction; however, echocardiography has limitations, including operator dependency and acoustic variability. Cardiac magnetic resonance (CMR) is a valuable complementary tool, and artificial intelligence (AI) may enhance strain measurement accuracy, though its role in AS remains underexplored. To evaluate the performance of an AI-based CMR feature tracking tool for the assessment of LV global and segmental GLS in AS patients and compare results with the respective measurements from healthy volunteers (control group), as well as with the GLS obtained using the echocardiographic speckle tracking technique. Materials and Methods: This retrospective study analysed 111 CMR exams (70 AS patients, 41 healthy controls) from a single centre. AI-derived GLS values from gradient echo 2-, 3-, and 4-chamber CMR views were manually reviewed for accuracy. Error rates, segmental, and global myocardial strain differences were assessed between AS patients and the control group. Results: AI-based CMR GLS strongly correlated with echocardiographic GLS (r = 0.694, p < 0.001) and showed lower variability. The AI-derived GLS from CMR was significantly lower in aortic stenosis patients compared to controls (−17.86 ± 3.47 vs. −20.70 ± 1.98). However, AI-based strain analysis had an overall error rate of 6%, which was significantly higher in AS patients (18.6%) compared to healthy controls (2.44%) (p = 0.0088). The 3-chamber CMR view was the most error-prone (50% of isolated errors). Segmental strain variability between AS patients and controls was most pronounced in basal segments, with smaller differences in middle and apical segments. CMR demonstrated greater precision than echocardiography, as indicated by a smaller standard deviation in GLS measurements (3.47 vs. 4.98). Conclusions: The AI-based CMR feature tracking technique provides accurate and reproducible GLS measurements, showing strong agreement with echocardiographic speckle tracking-based GLS. However, the higher error rates in AS patients compared to controls underscore the need for more advanced AI algorithms to improve performance in cardiac pathology. Full article

Root-knot nematodes (RKNs, Meloidogyne spp.) have become the major yield-limiting biological factor in common bean production in many warmer-climate regions such as the south of Europe. Broadening the genetic base of resistance in elite common bean cultivars is the most effective and environmentally friendly method for managing this disease. Toward this goal, F₁, F₂, and F₃ populations from crosses between susceptible snap beans (Helda and Perona) and the resistant Ouro Negro cultivar were phenotyped for M. incognita and M. javanica-induced root-galling (GI) and egg mass production (EM) in controlled growth chamber infection assays. F₁ progenies showed a susceptible response to both RKN isolates, with high GI and EM values, indicating a recessive inheritance of nematode resistance. The estimates for broad-sense heritability for GI and EM in the F₂ Helda × Ouro Negro population infected with M. incognita were 0.62 and 0.54, respectively. RKN resistance in Ouro Negro is largely controlled by partial to overdominant genetic effects and that susceptibility factor leads recessive resistance. The minimum number of genes involved in nematode resistance was estimated to be about two or three. In agreement, genetic analysis of F₂ segregating populations supported duplicate recessive epistasis as the inheritance pattern involved in the resistance provided by the Ouro Negro cultivar. Ouro Negro is an important resource for broadening RKN resistance in elite common bean cultivars. Full article

The classical approach for the preparation of an endodontically treated molar with a post and core involves widening the anatomically complex system of canals, which may be narrow or curved with variable angulation. The aforementioned along with the fact that restorative dentistry stands against the wastage of tooth tissue make endocrowns an appealing alternative. Bindl and Mörmann first described an all-ceramic crown anchored to the internal portion of the pulp chamber and on the cavity margins, thus obtaining macromechanical retention provided by the axial opposing pulpal walls and microretention attained with the use of adhesive cementation. The purpose of this report is to describe the protocol for the treatment plan selection, preparation, impression, and adhesive cementation of an endocrown with a follow-up of 5 years. A 56-year-old male patient presented to the Postgraduate Clinic of Prosthodontics seeking rehabilitation for tooth No. #36. A clinical examination revealed multiple immediate composite resin restorations with unacceptable morphology and adaptation to the remaining tooth as well as a lack of a contact point but, rather, a large, concave contact area facilitating food entrapment. Since the tooth was endodontically treated, the proposed treatment plan included the fabrication of an all-ceramic endocrown. The steps of preparation, attribution of the correct shape, impression, and adhesive luting under rubber dam isolation are thoroughly described. The final functional and aesthetic result, patient’s satisfaction, and the 5-year follow-up render restorations such as endocrowns, which draw their retention from adhesive luting, a viable alternative to conventional approaches. Full article

The rejection of chemical preservatives reflects the growing demand for natural and safe products. This concern has spurred scientific interest in yeasts as biocontrol agents, given their antagonistic activity against undesired fungi, which is one of the main problems associated with preservative reduction. Debaryomyces hansenii is a non-conventional yeast that has shown great potential for inhibiting filamentous fungi in the food industry. This study investigated the role of nutrient competition in the biocontrol activity of D. hansenii against unwanted molds. Potentially pathogenic molds from spoiled food were isolated using different media and identified using Sanger sequencing. The inhibitory effects of different autochthonous D. hansenii strains under varying nutrient conditions were assessed against isolated molds using semipermeable membranes. Inhibition activity was measured by assessing mycelial expansion and spore production using image software analysis and classical cell counting using a Neubauer chamber. The results indicated that D. hansenii effectively inhibited mold growth and sporulation, with the autochthonous strains LR2 and SRF1 showing higher inhibitory activity than the control strain CBS767. The effectiveness of inhibition varied with the yeast–mold combination, highlighting the need for a species-specific analysis. Nutrient competition plays a complementary role in D. hansenii biocontrol but does not directly impact overall inhibition. This suggests that other mechanisms, such as direct cell interactions or metabolite production, may be crucial. These findings enhance our understanding of the potential of D. hansenii as a natural preservative and advance biocontrol methods for food safety. Full article

Background/Objectives: To propose a combined surgery of surgically induced macular detachment (MD) and autologous internal limiting membrane (ILM) transplantation to treat refractory full thickness macular holes (FTMHs). Methods: A series of patients affected by refractory FTMHs underwent a combined surgery. The following demographic and clinical data were collected: age, gender, eye, lens status, and best corrected visual acuity (BCVA). The tomographic pre- and post-operative parameters were the following: pre-operative FTMH diameter, refractory FTMH morphology (flat/with cuff), FTMH closure, foveal profile (regular/flat/inverted), flap displacement, and outer retinal layers restoration. Results: The study included a total of 14 pseudophakic eyes (14 patients). In all of the patients, surgical FTMH closure was reached. The mean BCVA improved after surgery from 1.1 ± 0.14 to 0.48 ± 03 logMAR (p < 0.0001). Statistical analysis demonstrated that the larger the FTMH, the poorer the post-operative gain in BCVA (p −0.5). The post-operative regular foveal profile was obtained in 50% of the eyes with a mean post-operative BCVA of 0.3 logMAR. A negative correlation between the time interval from diagnosis to surgery and post-operative BCVA gain was highlighted (p −0.8). Conclusions: The proposed combined surgical technique led to encouraging anatomical and functional results. Surgically induced MD increased the elasticity of the retina, and the free flap isolated the macular hole from the vitreous chamber favoring its closure. Full article

The COVID-19 pandemic has highlighted the significant infection risks posed by aerosol generating procedures (AGPs). We developed a hood that covers the patient’s respiratory area, incorporating a negative pressure system to contain aerosols. This study analyzed the movement and containment of aerosols within a developed negative pressure isolation chamber. Using particle image velocimetry (PIV) technology, in the optimized design, the characteristics of aerosols were analyzed under both negative and non-negative pressure conditions. The results demonstrated that in the absence of negative pressure, droplets dispersed widely, with diffusion angles ranging from 26.9° to 34.2°, significantly increasing the risk of external leakage. When negative pressure was applied, the diffusion angles narrowed to 20.0–35.1° and inward airflow effectively directed droplets away from the chamber boundary, preventing external dispersion. Additionally, sensor data measuring particle concentrations confirmed that droplets smaller than 10 µm were fully contained under negative pressure, strongly supporting the chamber’s effectiveness. The strong agreement between PIV flow patterns and sensor measurements underscores the reliability of the experimental methodology. These findings highlight the chamber’s ability to suppress external leakage while offering superior flexibility and portability compared to conventional isolation systems, making it ideal for emergency responses, mobile healthcare units, and large-scale infectious disease outbreaks. Full article

Although a variety of protocols to isolate high-molecular-weight genomic DNA exist, the isolation and preservation of ultra-high-molecular-weight genomic DNA of sufficient quality and length for error-free third-generation sequencing remains challenging. Inspired by the isolation of high-molecular-weight DNA in agarose plugs suitable to be separated by pulsed-field gel electrophoresis, we report the construction of an incubation chamber for DNA isolation. The chamber is flanked by semi-permeable polycarbonate membranes of variable pore size for the selective diffusion of compounds and components, which allows efficient cell lysis and the subsequent isolation of ultra-high-molecular-weight genomic DNA without shearing. The designed experimental approach is simple, but effective in isolating high-quality ultra-long genomic DNA that is suitable for third-generation sequencing by Oxford Nanopore Technology from challenging bacterial samples. We envisage that genomic DNA isolation using the incubation chamber, or variations thereof, will facilitate the regular sequencing of megabasepair-long DNA fragments, with a multitude of applications in microbiology, immunology, oncology, paleontology and forensic science. Full article

On-chip microfluidics are advanced in vitro models that simulate lung tissue’s native 3D environment more closely than static 2D models to investigate the complex lung architecture and multifactorial processes that lead to pulmonary disease. Current microfluidic systems can be restrictive in the quantities of biological sample that can be retrieved from a single micro-channel, such as RNA, protein, and supernatant. Here, we describe a newly developed large-scale airway-on-chip model that employs a surface area for a cell culture wider than that in currently available systems. This enables the collection of samples comparable in volume to traditional cell culture systems, making the device applicable to any workflow utilizing these static systems (RNA isolation, ELISA, etc.). With our construction method, this larger culture area allows for easier handling, the potential for a wide range of exposures, as well as the collection of low-quantity samples (e.g., volatiles or mitochondrial RNA). The model consists of two large polydimethylsiloxane (PDMS) cell culture chambers under an independent flow of medium or air, separated by a semi-permeable polyethylene (PET) cell culture membrane (23 μm thick, 0.4 μm pore size). Each chamber carries a 5 × 18 mm, 90 mm² (92 mm² with tapered chamber inlets) surface area that can contain up to 1–2 × 10⁴ adherent structural lung cells and can be utilized for close contact co-culture studies of different lung cell types, including airway epithelial cells, fibroblasts, smooth muscle cells, and endothelial cells. The parallel bi-chambered design of the chip allows for epithelial cells to be cultured at the air–liquid interface (ALI) and differentiation into a dense, multi-layered, pseudostratified epithelium under biological flow rates. This millifluidic airway-on-chip advances the field by providing a readily reproducible, easily adjustable, and cost-effective large-scale fluidic 3D airway cell culture platform. Full article