Search Results (1,267)

This contribution aims to honour Guido Barbiellini’s profound interest in the interpretation and impact of quantum mechanics by examining the implications of the so-called before–before Experiment on quantum entanglement. This experiment was inspired by talks and discussions with John Bell at CERN. This was during the years when John and Guido co-worked, promoting the mission of the laboratory: “to advance the boundaries of human knowledge”. As the experiment uses measuring devices in motion, it can be considered a complement to entanglement experiments using stationary measuring devices, which have meanwhile been awarded the 2022 Nobel Prize in Physics. The before–before Experiment supports the idea that the quantum realm exists beyond space and time and that the quantum state is a real mental entity concerning choices. As it also leads us to a better understanding of the ‘quantum collapse’ and the measurement process, we pay homage to Guido’s work on detectors, such as his collaborations on the DELPHI experiment at CERN, on cosmic ray detection at the International Space Station, and gamma-ray astrophysics during a large NASA space mission. Full article

This paper addresses the critical challenge of selecting suitable pile foundations in port engineering by systematically investigating the axial bearing behavior of large-diameter steel pipe piles and prestressed high-strength concrete (PHC) piles. The study integrates both numerical simulations and field tests within the context of the Yancheng Dafeng Port Security Facilities Project. A self-balanced static load numerical model for PHC piles was developed using Plaxis 3D, enabling the simulation of load-displacement responses, axial force transfer, and side resistance distribution. The accuracy of the model was verified through a comparison with field static load test data. With the verified model parameters, the internal force distribution of steel pipe piles was analysed by modifying material properties and adjusting boundary conditions. A comparative analysis of the two pile types was conducted under identical working conditions. The results reveal that the ultimate bearing capacities of the 1# steel pipe pile and the 2# PHC pile are 6734 kN and 6788 kN, respectively. Despite the PHC pile having a 20% larger diameter, its ultimate bearing capacity is comparable to that of the steel pipe pile, suggesting a more efficient utilisation of material strength in the latter. Further numerical simulations indicate that, under the same working conditions, the ultimate bearing capacity of the steel pipe pile exceeds that of the PHC pile by 18.43%. Additionally, the axial force distribution along the steel pipe pile shaft is more uniform, and side resistance is mobilised more effectively. The reduction in side resistance caused by construction disturbances, combined with the slenderness ratio (L/D = 41.7) of the PHC pile, results in 33.87% of the pile’s total bearing capacity being attributed to tip resistance. The findings of this study provide crucial insights into the selection of optimal pile types for terminal foundations, considering factors such as bearing capacity, environmental conditions, and economic viability. Full article

The high cost of hydrogen production is the primary factor limiting the development of the hydrogen energy industry chain. Additionally, due to the inefficiency of hydrogen production by water electrolysis technology, the development of high-performance catalysts is an effective means of producing low-cost hydrogen. In water electrolysis technology, the electrocatalytic activity of the electrode affects the kinetics of the oxygen evolution reaction (OER) and the hydrogen evolution rate. This study utilizes the liquid phase co-precipitation method to synthesize three types of Prussian blue analog (PBA) electrocatalytic materials: Fe/PBA(Fe₄[Fe(CN)₆]₃), Fe-Mn/PBA((Fe, Mn)₃[Fe(CN)₆]₂·nH₂O), and Fe-Mn-Co/PBA((Mn, Co, Fe)₃^II[Fe^III(CN)₆]₂·nH₂O). X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses show that Fe-Mn-Co/PBA has a smaller particle size and higher crystallinity, and its grain boundary defects provide more active sites for electrochemical reactions. The electrochemical test shows that Fe-Mn-Co/PBA exhibits the best electrochemical performance. The overpotential of the oxygen evolution reaction (OER) under 1 M alkaline electrolyte at 10/50 mA·cm⁻² is 270/350 mV, with a Tafel slope of 48 mV·dec⁻¹, and stable electrocatalytic activity is maintained at 5 mA·cm⁻². All of these are attributed to the synergistic effect of Fe, Mn, and Co metal ions, grain refinement, and the generation of grain boundary defects and internal stresses. Full article

Internal fins are commonly utilized as a passive technique to enhance natural convection, but their efficiency depends on complex interplay between fin design, material properties, and convective strength. This study presents an extensive numerical analysis of buoyancy-driven flow in square cavities containing a single horizontal fin on the hot wall. Over 9000 simulations were conducted, methodically varying the Rayleigh number (Ra = 10 to 10⁵), Prandtl number (Pr = 0.1 to 10), and fin characteristics, such as length, vertical position, thickness, and the thermal conductivity ratio (up to 1000), to assess their overall impact on thermal efficiency. Thermal enhancements compared to scenarios without fins are quantified using local and average Nusselt numbers, as well as a Nusselt number ratio (NNR). The results reveal that, contrary to conventional beliefs, long fins positioned centrally can actually decrease heat transfer by up to 11.8% at high Ra and Pr due to the disruption of thermal plumes and diminished circulation. Conversely, shorter fins located near the cavity’s top and bottom wall edges can enhance the Nusselt numbers for the hot wall by up to 8.4%, thereby positively affecting the development of thermal boundary layers. A U-shaped Nusselt number distribution related to fin placement appears at Ra ≥ 10³, where edge-aligned fins consistently outperform those positioned mid-height. The benefits of high-conductivity fins become increasingly nonlinear at larger Ra, with advantages limited to designs that minimally disrupt core convective patterns. These findings challenge established notions regarding passive thermal enhancement and provide a predictive thermogeometric framework for designing enclosures. The results can be directly applied to passive cooling systems in electronics, battery packs, solar thermal collectors, and energy-efficient buildings, where optimizing heat transfer is vital without employing active control methods. Full article

The Kekeya oilfield is located at the southwestern edge of the Tarim Basin, in the southern margin of the Yecheng depression, at the western end of the second structural belt of the northern foothills of the Kunlun Mountains. It is one of the important oil and gas fields in western China, with significant oil and gas resource potential in the X4-X5 section of the Xihepu Formation. This study focuses on the edge of the alluvial fan depositional system, employing various techniques, including core data and well logging data, to precisely characterize the sand body architecture and comprehensively analyze the reservoir architecture in the study area. First, the regional geological background of the area is analyzed, clarifying the sedimentary environment and evolutionary process of the Xihepu Formation. Based on the sedimentary environment and microfacies classification, the sedimentary features of the region are revealed. On this basis, using reservoir architecture element analysis, the interfaces of the reservoir architecture are finely subdivided. The spatial distribution characteristics of the planar architecture are discussed, and the spatial distribution and internal architecture of individual sand body units are analyzed. The study focuses on the spatial combination of microfacies units along the profile and their internal distribution patterns. Additionally, a quantitative analysis of the sizes of various types of sand bodies is conducted, constructing the sedimentary model for the region and revealing the control mechanisms of different sedimentary architectures on reservoir properties and oil and gas accumulation patterns. This study pioneers a quantitative model for alluvial fan fringe in gentle-slope basins, featuring the following: (1) lobe width-thickness ratios (avg. 128), (2) four base-level-sensitive boundary markers, and (3) a retrogradational stacking mechanism. The findings directly inform reservoir development in analogous arid-climate systems. This research not only provides a scientific basis for the exploration and development of the Kekeya oilfield but also serves as an important reference for reservoir architecture studies in similar geological contexts. Full article

In this paper, voxel-based Asymptotic Homogenization (AH) is employed to calculate the thermal expansion and thermal conductivity characteristics of lattice materials that have a Representative Volume Element (RVE) with non-orthogonal periodic bases. The non-orthogonal RVE of the cellular lattice is discretized using voxel elements (iso-parametric hexahedral element, on a cartesian grid). A homogenization framework is developed in python that uses a fast-nearest neighbor algorithm to approximate the (non-orthogonal) periodic boundary conditions of the discretized RVE. Validation studies are performed where results of the homogenized Thermal Expansion Coefficient (TEC) and thermal conduction performed in this paper are compared with results generated by commercially available software. These included comparison with the results for (a) bi-material unidirectional composite with orthogonal RVE cell envelope; (b) bi-material hexagon lattice with orthogonal cell envelope; (c) bi-material hexagon lattice with non-orthogonal cell envelope; and (d) bi-material square lattice. A novel approach of visualizing the contribution of each voxel towards the individual terms within the homogenized thermal conductivity matrix is presented, which is necessary to mitigate any potential errors arising from the numerical model. Additionally, the effect of the thermal expansion and thermal conductivity for bi-material hexagon lattice (orthogonal and non-orthogonal RVE cell envelope) are presented for varying internal cell angles and all permutations of material assignments for a relative density of 0.3. It is found that when comparing the non-orthogonal RVE with the Orthogonal RVE as a reference model, the numerical error due to approximating the periodic boundary condition for the non-orthogonal bi-material hexagon is generally less than 2% as the numerical error is pseudo-cyclically dependent on the discretization along the cartesian axis. Full article

This study investigates the flow dynamics and local scour around a Reef Cube^® artificial reef deployed in Torbay, UK, using computational fluid dynamics. The flow is modelled using Reynolds-Averaged Navier–Stokes (RANS) equations with a k-ω SST turbulence model. A novel hydro-morphodynamic model employing the generalized internal boundary method in HELYX (OpenFOAM-based) is used to simulate scour development. Model performance was validated against experimental data for flow fields, bed shear stress, and local scour. Flow simulations across various scenarios demonstrated that parameters such as the orientation angle and arrangement of Reef Cubes significantly influence flow patterns, bed shear stress, and habitat suitability. The hydro-morphodynamic model was used to simulate scouring around a reef cube in the Torbay marine environment. Results indicate that typical tidal flow velocity flow in the region is barely sufficient to initiate sediment motion, whereas extreme flow events, represented by doubling the mean flow velocity, significantly accelerate scour development, producing holes up to ten times deeper. These findings underscore the importance of considering extreme flow conditions in scour analyses due to their potential impact on the stability and failure risk of AR projects. Full article

We developed a microscale airflow modeling system with detailed building and terrain data to better understand the urban microclimate. Building shapes and heights, and terrain elevation data were integrated to construct a high-resolution urban surface geometry. The system, based on computational fluid dynamics using OpenFOAM, can resolve complex flow structures around built environments. Inflow boundary conditions were generated using logarithmic wind profiles derived from Automatic Weather System (AWS) observations under neutral stability. After validation with wind-tunnel data for a single block, the system was applied to airflow modeling around a university campus in Seoul using AWS data from four nearby stations. The results demonstrated that the system captured key flow characteristics such as channeling, wake, and recirculation induced by complex terrain and building configurations. In particular, easterly inflow cases with high-rise buildings on the leeward side of a mountain exhibited intensified wakes and internal recirculations, with elevated centers influenced by tall structures. This modeling framework, with further development, could support diverse urban applications for microclimate and air quality, facilitating urban resilience. Full article

This paper presents a neural network model, PINN-AeroFlow-U, for reconstructing full-field aerodynamic quantities around three-dimensional compressor blades, including regions near the wall. This model is based on structured CFD training data and physics-informed loss functions and is proposed for direct 3D compressor flow prediction. It maps flow data from the physical domain to a uniform computational domain and employs a U-Net-based neural network capable of capturing the sharp local transitions induced by fluid acceleration near the blade leading edge, as well as learning flow features associated with internal boundaries (e.g., the wall boundary). The inputs to PINN-AeroFlow-U are the flow-field coordinate data from high-fidelity multi-geometry blade solutions, the 3D blade geometry, and the first-order metric coefficients obtained via mesh transformation. Its outputs include the pressure field, temperature field, and velocity vector field within the blade passage. To enhance physical interpretability, the network’s loss function incorporates both the Euler equations and gradient constraints. PINN-AeroFlow-U achieves prediction errors of 1.063% for the pressure field and 2.02% for the velocity field, demonstrating high accuracy. Full article

Water migration occurs in unsaturated loess subgrade due to extreme rainfall, making it prone to subgrade subsidence and other water damage disasters, which seriously impact road safety and sustainable development of the Loess Plateau. The study performed a rainfall test using a compacted loess subgrade model based on a self-developed water migration test device. The effects of extreme rainfall on the water distribution, wetting front, and infiltration rate in the subgrade were systematically explored by setting three rainfall intensities (4.6478 mm/h, 9.2951 mm/h, and 13.9427 mm/h, namely J1 stage, J2stage, and J3 stage), and a lateral water migration model was proposed. The results indicated that the range of water content change areas constantly expands as rainfall intensity and time increase. The soil infiltration rate gradually decreased, and the ratio of surface runoff to infiltration rainfall increased. The hysteresis of lateral water migration refers to the physical phenomenon in which the internal water response of the subgrade is delayed in time and space compared to changes in boundary conditions. The sensor closest to the side of the slope changed first, with the most significant fluctuations. The farther away from the slope, the slower the response and the smaller the fluctuation. The bigger the rainfall intensity, the faster the wetting front moved horizontally. The migration rate at the slope toe is the highest. The migration rate of sensor W3 increased by 66.47% and 333.70%, respectively, in the J3 stage compared to the J2 and J1 stages. The results of the model and the measured data were in good agreement, with the R² exceeding 0.90, which verifies the reliability of the model. The study findings are important for guiding the prevention and control of disasters caused by water damage to roadbeds in loess areas. Full article

The accurate acquisition of agricultural parcels from remote sensing images is crucial for agricultural management and crop production monitoring. Most of the existing agricultural parcel extraction methods comprise semantic segmentation through remote sensing images, pixel-level classification, and then vectorized raster data. However, this approach faces challenges such as internal cavities, unclosed boundaries, and fuzzy edges, which hinder the accurate extraction of complete agricultural parcels. Therefore, this paper proposes a vector contour segmentation network based on the hybrid backbone and multiscale edge feature extraction module (HEVNet). We use the extraction of vector polygons of agricultural parcels by predicting the location of contour points, which avoids the above problems that may occur when raster data is converted to vector data. Simultaneously, this paper proposes a hybrid backbone for feature extraction. A hybrid backbone combines the respective advantages of the Resnet and Transformer backbone networks to balance local features and global features in feature extraction. In addition, we propose a multiscale edge feature extraction module, which can extract and enhance the edge features of different scales to prevent the possible loss of edge details in down sampling. This paper uses the datasets of Denmark, the Netherlands, iFLYTEK, and Hengyang in China to evaluate our model. The obtained IOU indexes were 67.92%, 81.35%, 78.02%, and 66.35%, which are higher than previous IOU indexes based on the optimal model (DBBANet). The results demonstrate that the proposed model significantly enhances the integrity and edge accuracy of agricultural parcel extraction. Full article

Due to increasing environmental concerns and the constant development of the bottling industry, research into the environmental impact of beverage packaging processes is crucial. The aim of this article is to determine the environmental impact, in selected aspects, of automated beverage bottling and packaging processes using life cycle analysis (LCA). The analysis covers key process stages, such as filling, packaging and internal transport, in the context of raw material consumption, but also energy and waste generation. This work focuses primarily on the impact of changing the raw material used for bottle and shrink film production on the environmental impact of the studied technical facility within the adopted system boundaries and on analyzing scenarios for the management of these post-consumer materials. This research has shown that the stage associated with the greatest negative environmental impact is the shrinking of the film around the bottles. Furthermore, it has been demonstrated that recycling plastic film and bottle waste is a more environmentally friendly solution than landfill disposal. The analysis shows that using recycled materials in the tested production line allows for the reduction of harmful emissions and a reduction in the overall environmental footprint of the tested system. Full article

Unveiling temperature patterns within agricultural products remains the most important indicator for their quality assessment during post-harvest treatments. Temperature control and monitoring within vented packages is essential for preserving the quality of perishable goods, such as tomato fruits, by preventing localized temperature maxima that can accelerate spoilage. This study proposes a modeling and simulation approach to systematically investigate how ventilation design choices influence internal airflow distribution and the resulting cooling performance. Our analysis compares three distinct venting configurations (single top vent, single middle vent, and two vents) across two package boundary conditions: an open-top system allowing for dual air exits through the open top boundary and the outlet vent(s), respectively, and a closed-top system with a single exit pathway through the outlet vent(s). All scenarios are simulated to assess airflow patterns, velocity magnitudes, and temperature uniformity within different package designs. Full article

Computational fluid dynamics (CFD) has aided the development, design, and analysis of hypersonic airbreathing propulsion technologies, such as scramjets. The complex flow field in a scramjet isolator has been the subject of intense interest and study for several decades. Many features of this flow field also occur in supersonic wind-tunnel nozzles and diffusers. Computational analysis of these topics has frequently provided immense insight into the actual functionality and performance. Research presented in this work supports scientific investigation and understanding of a less-researched topic, which is shock–shock interference and interaction with the boundary layer in supersonic internal flows, as well as the passive control of its adverse effects to prevent the onset of unstart in a scramjet isolator. This computational investigation is conducted on a backpressured isolator and a modified three-dimensional shock-tube to represent a scramjet isolator with ram effects provided by high-pressure gas and high-speed flow provided by a supersonic inflow. Computational results for the backpressured isolator have been validated against available measured time-averaged wall pressure data. The modified shock-tube provided an opportunity to study the shock–shock interference and shock–boundary-layer interaction effects that would occur in a scramjet isolator or a ram-accelerator when the high-speed flow from the inlet interacted with the shock produced due to the combustor pressure traveling and meeting in the isolator. An assessment of wall cooling effects on these phenomena is presented for both the backpressured isolator and the modified shock-tube. Full article

This study explored the effects of adding a newly developed type of polydextrose on the appearance, sensory score, and textural parameters of steamed bread and the microstructure of dough, as well as the pasting, thermal, and thermal mechanical properties of high-gluten wheat flours. The results revealed that, compared with a control sample, 3–10% of polydextrose addition significantly increased the hardness, adhesiveness, gumminess, and chewiness of steamed bread, but other textural parameters like springiness, cohesiveness, and resilience remained basically the same. Further, in contrast to the control sample, 3–10% polydextrose addition significantly reduced the specific volume and width/height ratio of steamed bread but increased the brightness index, yellowish color, and color difference; improved the internal structure; and maintained the other sensory parameters and total score. Polydextrose addition decreased the peak, trough, final, breakdown, and setback viscosity of the pasting of wheat flour suspension solutions but increased the pasting temperature. Polydextrose additions significantly reduced the enthalpy of gelatinization and the aging rate of flour paste but increased the peak temperature of gelatinization. A Mixolab revealed that, with increases in the amount of added polydextrose, the dough’s development time and heating rate increased, but the proteins weakened, and the peak torque of gelatinization, starch breakdown, and starch setback torque all decreased. Polydextrose additions increased the crystalline regions of starch, the interaction between proteins and starch, and the β-sheet percentage of wheat dough without yeast and of steamed bread. The amorphous regions of starch were increased in dough through adding polydextrose, but they were decreased in steamed bread. Further, 3–10%of polydextrose addition decreased the random coils, α-helixes, and β-turns in dough, but the 3–7% polydextrose addition maintained or increased these conformations in steamed bread, while 10% polydextrose decreased them. In unfermented dough, as a hydrogel, the 5–7% polydextrose addition resulted in the formation of a continuous three-dimensional network structure with certain adhesiveness and elasticity, with increases in the porosity and gas-holding capacity of the product. Moreover, the 10% polydextrose addition further increased the viscosity, freshness, and looseness of the dough, with smaller and more numerous holes and indistinct boundaries between starch granules. These results indicate that the 3–10% polydextrose addition increases the chewiness and freshness of steamed bread by improving the gluten network structure. This study will promote the addition of polydextrose in steamed bread to improve shelf-life and dietary fiber contents. Full article