Search Results (126)

The BeiDou-3 Navigation Satellite System (BDS-3) broadcasts multi-frequency signals, including B1C, B2a, B1I, and B3I, offering a new technical approach for tilt monitoring of building structural safety. However, in building structural safety tilt monitoring based on the BDS-3 single-epoch algorithm, the engineering performance differences between the B1C/B2a new signal combination and the B1I/B3I traditional signal combination—in terms of monitoring accuracy, ambiguity fixing rate, computational efficiency, and tilt rate—have yet to be fully validated through comparative analysis. To address this issue, this paper proposes a building structural safety tilt monitoring method based on the BDS-3 single-epoch algorithm and conducts a field test on a multi-story building in Beijing. First, a BDS-3-based kinematic monitoring model is established, and an integer ambiguity error search band method based on the main and auxiliary frequencies is proposed. On this basis, three schemes are designed using medium Earth orbit (MEO), inclined geosynchronous orbit (IGSO), and geostationary Earth orbit (GEO) satellites, B1C/B2a (MEO/IGSO), B1I/B3I (MEO/IGSO), and B1I/B3I (MEO/IGSO/GEO), to comparatively analyze the accuracy, ambiguity fixing rate, computational efficiency, and measured tilt results of each scheme in building structural safety tilt monitoring. Experimental results show that all three schemes based on the BDS-3 single-epoch algorithm achieve millimeter-level monitoring accuracy and an ambiguity fixing rate exceeding 99%, with average computational times of 0.351 s, 0.338 s, and 4.572 s and corresponding building tilt rates of 0.22‰, 0.20‰, and 0.18‰, respectively, yielding an average tilt rate of 0.20‰. These results satisfy the 4‰ limit specified in the Code for Deformation Measurement of Building and Structure (JGJ 8-2016), thereby confirming the feasibility and effectiveness of the proposed method and offering a novel BDS-3 single-epoch algorithm for building tilt monitoring. Full article

Space-based solar (SBS) has the potential to provide spacecraft-to-spacecraft power transmission, powering space-based computers serving artificial intelligence, and contribute to addressing terrestrial solar resource intermittency. This paper identified and assessed system efficiencies, and the orbital analysis required for SBS power beaming to remote terrestrial areas and to other spacecraft from SBS systems on Low Earth Orbit (LEO), Medium Earth Orbit (MEO), and Geosynchronous Orbit (GEO). Specific scenarios are presented to demonstrate simulation capabilities using Matlab/Simulink which provide orbit visualization, control of classical orbital elements (COEs) to determine power beaming overhead time to remote locations and other satellites, as well as eclipse cycles and solar capture forecasts. Other simulation results to support SBS operations include earth–space propagation and transmission losses for desired radiofrequency (RF) microwave power beaming wavelengths. We identified the SBS orbit requirements for continuous space-to-earth power beaming accounting for overhead time, earth coverage and RF spot size, solar capture, and power delivered at the receiver site. A total of 10,000 km MEO circular orbits with 55-degree inclination are potential candidates for SBS satellites, with overhead time for a single satellite forecasted at 28%, covering 30% of earth, while optimizing solar capture at 97%. Technology improvements can increase predicted power transmission efficiencies by 5–10% through RF beam and phase focusing. While other studies focus on a single orbital regime, this paper presents a novel comparative analysis, using an integrated model to quantitatively assess the tradeoffs in coverage and link performance between LEO, MEO, and inclined GEO architectures for SBS. Full article

The Arctic region holds immense strategic value in terms of scientific expedition, maritime transportation, and resource development, which makes reliable and secure satellite navigation services in this area crucial. This study first calculates and analyzes key performance indicators of BeiDou System (BDS). These indicators include the number of visible satellites, Position Dilution of Precision (PDOP) values, and observation elevation angles at typical monitoring points in the Arctic region. To improve BDS’s coverage capabilities and further enhance its contribution to global satellite navigation in the Arctic region, two methods are proposed in this paper: (1) to introduce regional services such as PPP, SABS and a regional short message service to BDS Inclined Geosynchronous Orbit (IGSO) satellites and (2) to increase the inclination angle of BDS IGSO satellites to 60 degrees. A comparative analysis between the proposed design and the existing system was conducted. The results show that: (1) utilizing IGSO satellites for regional services can significantly improve coverage in the Arctic region, and (2) adjusting the IGSO satellite inclination to 60 degrees could enhance the performance of BDS’s Radio Navigation Satellite Service (RNSS) and other regional services. Full article

This study presents a comprehensive analysis of pre- and co-seismic ionospheric disturbances associated with the 2023 Ms6.2 Jishishan earthquake by leveraging the unique observational strengths of BDS, particularly its high-orbit satellites. A multi-parameter space weather index was employed to effectively isolate seismogenic signals from geomagnetic disturbances, confirming that the main shock occurred during geomagnetically quiet conditions. Statistical analysis of 41 historical earthquakes (Mw ≥ 5.5) reveals that 47.2% were associated with detectable Total Electron Content (TEC) anomalies. An inverse correlation between earthquake magnitude and anomaly detectability within a 31-day window suggests prolonged precursor durations for larger events may produce longer-duration precursory signals, which challenge conventional detection methods. The synergistic capabilities of BDS Geostationary Earth Orbit (GEO) and Inclined Geosynchronous Orbit (IGSO) satellites were demonstrated: GEO satellites provide unprecedented temporal stability for continuous TEC monitoring, while IGSO satellites enable high-resolution spatial mapping of Co-seismic Ionospheric Disturbances (CIDs). The detected CIDs propagated at velocities below 1.6 km/s, consistent with acoustic gravity wave (AGW) mechanisms. A case study during a geomagnetically active period further reveals modulated CID propagation characteristics, indicating potential coupling between seismic forcing and space weather. Our findings validate BDS as a powerful and precise tool for ionospheric seismology and provide critical insights into Lithosphere–Atmosphere–Ionosphere Coupling (LAIC) dynamics. Full article

In geosynchronous orbit satellite synthetic aperture radar (GEO SAR) maritime surveillance, imaging of ship targets with complex motion is a hard task. The difficulty lies in how to process the received signal with an extremely low signal-to-noise ratio (SNR), long synthetic aperture time, high-order phase term and range migration. To address the issue, this paper proposes a GEO SAR refocusing algorithm for ship targets with complex motion via ISAR technique, which is based on complex fast-time slow-time frequency distribution (CFSFD). First, the received signal of ship targets with complex motion is derived and modeled as a multicomponent 2-D joint sine-series-polynomial phase signal (2-D JSPS), where 2-D signal is used to describe the signal with range migration induced by complex motion. To deal with the signal, a joint envelope-phase estimation named CFSFD is proposed. Even under low SNR and long synthetic aperture time, CFSFD can achieve directly instantaneous frequency analysis for 2-D JSPS accurately. Finally, a hybrid SAR/ISAR refocusing algorithm is proposed, in which CFSFD-based ISAR technique replaces the range migration correction followed by time–frequency transform approach, yielding clear refocused results of ship targets with complex motion. Simulation and real data experiments validate the effectiveness of the proposed algorithm. Full article

As the world’s first geosynchronous (GEO) orbit synthetic aperture radar (SAR) satellite, LuTan-4 was successfully launched on 13 August 2023. It was developed by the China Academy of Space Technology, with which the authors are affiliated. This study presents a comprehensive review of the recent advancements in GEO SAR technology. The review first begins by summarizing key considerations in GEO SAR system design, including orbital parameters and synthetic aperture time, transmit power and antenna aperture, two-dimensional beam-steering, imaging parameters and non-ideal factors. In terms of GEO SAR signal processing, the article focuses on two fundamental models, i.e., the high-order slant-range model and the coupled space-variant signal model. It also introduces the current GEO SAR imaging algorithms. Furthermore, the study presents an analysis between GEO SAR and low-Earth orbit SAR systems, highlighting the superior capability of GEO SAR for large-scale surface dynamic processes. Finally, the paper outlines the future development directions and potential applications of GEO SAR technology. Full article

The accurate prediction of the point-ahead angle (PAA) is crucial for applications of inter-satellite laser links (ISLLs), especially laser ranging and continuous communication. Herein, a real-time and high-precision point-ahead-angle algorithm is presented; the principle of the algorithm is mathematically characterized, and its performance is simulated and verified using typical on-orbit scenarios. The maximum PAAs of a typical geosynchronous equatorial orbit (GEO)–GEO link and low Earth orbit (LEO)–GEO link were simulated with this algorithm, and the results are consistent with those of typical calculation methods, proving the algorithm’s accuracy. The performance of the proposed algorithm was verified using a practical engineering application of ISLLs, where it was used to calculate the point-ahead angle during stable on-orbit communication. The Pearson correlations between the curves of azimuth, elevation, and total point-ahead angles, and the actual experimental data are 99.91%, 52.32%, and 98.01%, respectively. The corresponding average deviations are −5.8510 nrad, −1.0945 nrad, and −79.5403 nrad, respectively. The maximum calculation error is 5.2103%, and the calculation accuracy exceeds 94%. The above results show that the algorithm produces results that closely match actual on-orbit experimental data with high calculation accuracy, enabling the accurate prediction of the point-ahead angle and the improvement of ISLL stability. Additionally, with this method, the measurement error of the laser ranging is smaller than 50 μm, further enhancing the accuracy of precision measurements based on ISLLs. Full article

Geosynchronous satellite maneuver detection is critical for enhancing space situational awareness and inferring satellite intent. However, traditional methods often require high-quality orbital sequence data and heavily rely on hand-crafted features, limiting their effectiveness in complex real-world environments. While recent neural network-based approaches have shown promise, they are typically trained in scene or task-specific settings, resulting in limited generalization and adaptability. To address these challenges, we propose MC-MD, a pre-training framework that integrates Masked and Clustered learning strategies to improve the robustness and transferability of geosynchronous satellite Maneuver Detection. Specifically, we introduce a masked prediction module that applies both time- and frequency-domain masking to help the model capture temporal dynamics more effectively. Meanwhile, a cluster-based module guides the model to learn discriminative representations of different maneuver patterns through unsupervised clustering, mitigating the negative impact of distribution shifts across scenarios. By combining these two strategies, MC-MD captures diverse maneuver behaviors and enhances cross-scenario detection performance. Extensive experiments on both simulated and real-world datasets demonstrate that MCMD achieves significant performance gains over the strongest baseline, with improvements of 8.54% in Precision and 7.8% in F1-Score. Furthermore, reconstructed trajectories analysis shows that MC-MD more accurately aligns with the ground-truth maneuver sequence, highlighting its effectiveness in satellite maneuver detection tasks. Full article

The Beidou Global System (BDS-3) innovatively achieves autonomous navigation using inter-satellite links (ISL) across the entire constellation, but it still faces challenges such as the limitations of the prior constraint orbital accuracy and the overall constellation rotation. The gradual availability of satellite laser ranging (SLR) data, with advantages of high precision and no ambiguous parameters, can provide new ideas for solving the current problem. This work firstly deduces the mathematical model for orbit determination by combining inter-satellite links and the introduced satellite laser ranging observations, then designs orbit determination experiments with different prior orbit constraints and different observation data, and finally evaluates the impacts of the prior orbits and the introduction of SLR observations from two dimensions: orbit accuracy and constellation rotation. The experimental results using one month of measured data show the following: (1) There is good consistency among different days, and the accuracy of the prior orbits affects the performance of the orbit determination and the consistency. Compared with broadcast ephemerides, using precise ephemerides as prior constraints significantly improves the consistency, and the orbit accuracy can be increased by about 75%. (2) The type of observation data affects the performance of the orbit determination. Introducing SLR observations can improve the orbit accuracy by approximately 13% to 26%. (3) Regardless of whether broadcast ephemerides or precise ephemerides are used as prior constraints, the constellation translation and rotation still exist after introducing SLR observations. Among the translation parameters, TX is the largest, followed by TY, and TZ is the smallest; all three rotation parameters (RX, RY, and RZ) show relatively large values, which may be related to the limited number of available satellite laser ranging stations during this period. (4) After considering the constellation translation and rotation, the orbit accuracy under different prior constraints remains at the same level. The statistical root mean square error (RMSE) indicates that the orbit accuracy of inclined geosynchronous orbit (IGSO) satellites in three directions is better than 20 cm, while the accuracy of medium earth orbit (MEO) satellites in along-track, cross-track, and radial directions is better than 10 cm, 8 cm, and 5 cm, respectively. Full article

Maintaining a spacecraft’s center of mass at the origin of a body-fixed coordinate system is often key to precision trajectory tracking. Typically, the inertia matrix is estimated and verified with preliminary ground testing. This article presents groundbreaking preliminary results and significant findings from on-orbit space experiments validating recently proposed methods as part of a larger study over multiple years. Time-varying estimates of inertia moments and products are used to reveal time-varying estimates of the location of spacecraft center of mass using geosynchronous orbiting test satellites proposing a novel two-norm optimal projection learning method. Using the parallel axis theorem, the location of the mass center is parameterized using the cross products of inertia, and that information is extracted from spaceflight maneuver data validating modeling and simulation. Mass inertia properties are discerned, and the mass center is experimentally revealed to be over thirty centimeters away from the assumed locations in two of the three axes. Rotation about one axis is found to be very well balanced, with the center of gravity lying on that axis. Two-to-three orders of magnitude corrections to inertia identification are experimentally demonstrated. Combined-axis three-dimensional maneuvers are found to obscure identification compared with single-axis maneuvering as predicted by the sequel analytic study. Mass center location migrates 36–95% and subsequent validating experiments duplicate the results to within 0.1%. Full article

Conducting surveys and the timely acquisition of satellite status, especially for high-value geostationary orbit (GEO) targets, is of great significance for space traffic management. This article proposes an approach for patrolling inclined geosynchronous orbit (IGSO) targets based on crossing points and spiral rings. The method involves six steps: (1) calculate the crossing position and crossing time of the IGSO targets; (2) design a spiral trajectory that satisfies the desired patrol time; (3) divide IGSO targets into regions using a dichotomy approach; (4) calculate the bidirectional longitude drift rate within each region; (5) determine the starting position of patrol for each region; and (6) determine the transfer trajectory for each region. By selecting a class of IGSO satellites as the target set, the proposed approach is analyzed and validated in detail. The results show that the patrol orbit can effectively achieve patrol all of IGSO targets, with a period of no more than 40 days and less than 13.5 kg fuel consumption. The total fuel consumption of a single patrol cycle in all regions does not exceed 91.82 kg. Full article

Radiation impacts on space-based systems operating on various orbits are evaluated in this paper. Specifically, satellite operations in Low Earth Orbit (LEO), Medium Earth Orbit (MEO), and Geosynchronous Orbit (GEO) are analyzed. Special focus is given on quantifying the effect of high-energy particle space radiation on materials used for critical power components, where component fault can lead to total mission failure. Methods, using multiple computational platforms for the quantification of non-ionizing energy loss (NIEL) and displacement damage dose (DDD), are used to assess semiconductor damage at specific orbital altitudes. Detailed simulations were conducted for Gallium Arsenide Indium Phosphide (GaInP/GaAs/Ge) solar cells with various cover glass thicknesses, and the survivability of GaInP/GaAs/Ge cells was compared with that of Si cells. It was assessed that radiation exposure due to high-energy protons at 10,000 km is more prevalent than 20,000 km orbits and that electron bombardment is a major electronic damage culprit. For MEO at 10,000 km, MEO at 20,000 km, and GEO at 36,000 km, we determined the 1-year maximum power (Pmax) losses due to protons to be 23%, 8%, and 1% and losses due to electrons to be 11%, 14%, and 10%. Total integrated spectra Pmax losses for those altitudes are 25%, 16%, and 10%, respectively. Full article

As a special microwave detection system, multistatic radar has obvious advantages in covert operation, anti-jamming, and anti-stealth due to its configuration of spatial diversity. As a high-orbit irradiation source, a geosynchronous orbit satellite (GEO) has the advantages of a low revisit period, large beam coverage area, and stable power of ground beam compared with traditional passive radar irradiation sources. This paper focuses on the key technologies of flight target detection in multistatic radar based on geosynchronous orbit satellite irradiation with one transmitter and multiple receivers. We carry out the following work: Firstly, we aim to address the problems of low signal-to-noise ratio (SNR) and range cell migration of high-speed cruise targets. The Radon–Fourier transform constant false alarm rate detector-range cell migration correction (RFT-CFAR-RCMC) is adopted to realize the coherent integration of echoes with range cell migration correction (RCM) and Doppler phase compensation. It significantly improves the SNR. Furthermore, we utilize the staggered PRF to solve the ambiguity and obtain multi-view data. Secondly, based on the aforementioned target multi-view detection data, the linear least square (LLS) multistatic positioning method combining bistatic range positioning (BR) and time difference of arrival positioning (TDOA) is used, which constructs the BR and TDOA measurement equations and linearizes by mathematical transformation. The measurement equations are solved by the LLS method, and the target positioning and velocity inversion are realized by the fusion of multistatic data. Finally, using target positioning data as observation values of radar, the Kalman filter (KF) is used to achieve flight trajectory tracking. Numerical simulation verifies the effectiveness of the proposed process. Full article

The charging and discharging of satellite surfaces induced by the space plasma environment constitute a primary cause of spacecraft anomalies, particularly in geosynchronous orbits subject to geomagnetic substorms and hot plasma injections from the magnetotail, where satellites are prone to unequal high-potential charging, significantly impacting the safe and reliable operation of spacecraft. Addressing the need for measuring these unequal charge states, a high-precision, wide-range spacecraft potential measurement method based on capacitive voltage division was investigated. This study analyzed the mechanism of potential measurement and the factors contributing to errors during the measurement process, explored optimal design methodologies, and innovatively developed a fundamental charge zeroing method to resolve output drift issues caused by accumulated errors fundamentally. Consequently, a non-contact potential measurement system was developed, featuring a measurement range of up to −15,000 V, a resolution below 15 V, and a nonlinear error of less than 0.1%. This system provides technical support for monitoring the potential state of spacecraft and ensuring their safety and protection. Full article

The geostationary earth orbit (GEO) represents a distinctive geosynchronous orbit situated in the Earth’s equatorial plane, providing an excellent platform for long-term monitoring of ionospheric total electron content (TEC) at a quasi-invariant ionospheric pierce point (IPP). With GEO satellites having limited dual-frequency coverage, the inclined geosynchronous orbit (IGSO) emerges as a valuable resource for ionospheric modeling across a broad range of latitudes. This article evaluates satellite differential code biases (DCB) of BDS high-orbit satellites (GEO and IGSO) and assesses regional ionospheric modeling utilizing data from international GNSS services through a refined polynomial method. Results from a 48-day observation period show a stability of approximately 2.0 ns in BDS satellite DCBs across various frequency signals, correlating with the available GNSS stations and satellites. A comparative analysis between GEO and IGSO satellites in BDS2 and BDS3 reveals no significant systematic bias in satellite DCB estimations. Furthermore, high-orbit BDS satellites exhibit considerable potential for promptly detecting high-resolution fluctuations in vertical TECs compared to conventional geomagnetic activity indicators like Kp or Dst. This research also offers valuable insights into ionospheric responses over mid-latitude regions during the March 2024 geomagnetic storm, utilizing TEC estimates derived from BDS GEO and IGSO satellites. Full article