Search Results (509)

Solid fuels are still widely used in household heating in Europe and North America. Emissions from boilers are released in proximity to people. Therefore, there is a need to minimise the toxicity of emissions affecting human health to the greatest extent possible. This study compares the genotoxic potential of the emissions of four boilers of modern and old design (automatic, gasification, down-draft, over-fire) operating at reduced output to simulate the real-life combustion fed by various fossil and renewable solid fuels (hard coal, brown coal, brown coal briquettes, wood pellets, wet and dry spruce). Organic emissions were tested for genotoxic potential by analysing bulky DNA adducts and 8-oxo-dG adduct induction. There was no consistent genotoxic pattern among the fuels used within the boilers. Genotoxicity was strongly correlated with polycyclic aromatic hydrocarbon (PAH) content, and even stronger correlation was observed with particulate matter (PM). In all measured variables (PM, PAHs, genotoxicity), the technology of the boilers was a more important factor in determining the genotoxic potential than the fuels burned. The highest levels of both bulky and 8-oxo-dG DNA adducts were induced by organics originating from the over-fire boiler, while the automatic boiler exhibited genotoxic potential that was ~1000- and 100-fold lower, respectively. Full article

Waste-to-energy (WtE) are clean technologies that support a circular economy by providing solutions to managing non-recyclable waste while generating alternative energy sources. Despite the promising benefits, technology adoption is challenged by financing constraints, technical maturity, environmental impacts, supporting policies, and public acceptance. A growing number of studies analyzed the acceptability of WtE and identified the factors affecting the adoption of WtE technologies. This study aims to analyze these research hotspots, technologies, and acceptability factors by combining bibliometric and systematic analyses. An initial search from the Web of Science and Scopus databases identified 817 unique documents, and the refinement resulted in 109 for data analysis. The results present a comprehensive overview of the state-of-the-art, providing researchers a basis for future research directions. Among the WtE technologies in the reviewed literature are incineration, anaerobic digestion, gasification, and pyrolysis, with limited studies about refuse-derived fuel and landfilling with gas recovery. The identified common factors include perceived risks, trust, attitudes, perceived benefits, “Not-In-My-BackYard” (NIMBY), awareness, and knowledge. Moreover, the findings present valuable insights for policymakers, practitioners, and WtE project planners to support WtE adoption while achieving sustainable, circular, and low-carbon economies. Full article

Gasification of municipal solid waste and other biogenic residues (e.g., biomass and biowaste) is increasingly recognized as a promising thermochemical pathway for converting non-recyclable fractions into valuable energy carriers, with applications in electricity generation, district heating, hydrogen production, and synthetic fuels. This paper provides a comprehensive analysis of major gasification technologies, including fixed bed, fluidized bed, entrained flow, plasma, supercritical water, microwave-assisted, high-temperature steam, and rotary kiln systems. Key aspects such as feedstock compatibility, operating parameters, technology readiness level, and integration within circular economy frameworks are critically evaluated. A comparative assessment of incineration and pyrolysis highlights the environmental and energetic advantages of gasification. The valorization pathways for main product (syngas) and by-products (syngas, ash, tar, and biochar) are also explored, emphasizing their reuse in environmental, agricultural, and industrial applications. Despite progress, large-scale adoption in Europe is constrained by economic, legislative, and technical barriers. Future research should prioritize scaling emerging systems, optimizing by-product recovery, and improving integration with carbon capture and circular energy infrastructures. Supported by recent European policy frameworks, gasification is positioned to play a key role in sustainable waste-to-energy strategies, biomass valorization, and the transition to a low-emission economy. Full article

Chile is among the leading global exporters of pulp and paper, supported by extensive plantations of Pinus radiata and Eucalyptus spp. This review synthesizes recent progress in the valorization of forestry biomass in Chile, including both established practices and emerging bio-based applications. It highlights advances in lignin utilization, nanocellulose production, hemicellulose processing, and tannin extraction, as well as developments in thermochemical conversion technologies, including torrefaction, pyrolysis, and gasification. Special attention is given to non-timber forest products and essential oils due to their potential bioactivity. Sustainability perspectives, including Life Cycle Assessments, national policy instruments such as the Circular Economy Roadmap and Extended Producer Responsibility (REP) Law, are integrated to provide context. Barriers to technology transfer and industrial implementation are also discussed. This work contributes to understanding how forestry biomass can support Chile’s transition toward a circular bioeconomy. Full article

This study explores innovative strategies for decarbonizing sludge thermal treatments used in electrical power generation, with a focus on integrating sensor technologies and artificial intelligence. Sludge, a carbon-intensive byproduct of wastewater treatment, presents both environmental challenges and opportunities for energy recovery. The paper provides a comprehensive analysis of thermal processes such as pyrolysis, gasification, co-combustion, and emerging methods, including hydrothermal carbonization and supercritical water gasification. It evaluates their carbon mitigation potential, energy efficiency, and economic feasibility, emphasizing the importance of catalyst selection, carbon dioxide capture techniques, and reactor optimization. The role of real-time monitoring via sensors and predictive modeling through artificial intelligence (AI) is highlighted as critical for enhancing process control and sustainability. Case studies and recent advances are discussed to outline future pathways for integrating thermal treatment with circular economy principles. This work contributes to sustainable waste-to-energy practices, supporting global decarbonization efforts and advancing the energy transition. Full article

This review thoroughly evaluates gasification as a transformative alternative to conventional methods for managing municipal solid waste (MSW), highlighting its potential to convert carbonaceous materials into syngas for energy and chemical synthesis. A comparative evaluation of more than 350 papers and documents demonstrated that gasification is superior to incineration and pyrolysis, resulting in lower harmful emissions and improved energy efficiency, which aligns with sustainability goals. Key operational findings indicate that adjusting the temperature to 800–900 °C leads to the consumption of CO₂ and the production of CO via the Boudouard reaction. Air gasification produces syngas yields of up to 76.99 wt% at 703 °C, while oxygen gasification demonstrates a carbon conversion efficiency of 80.2%. Steam and CO₂ gasification prove to be effective for producing H₂ and CO, respectively. Catalysts, especially nickel-based ones, are effective in reducing tar and enhancing syngas quality. Innovative approaches, such as co-gasification, plasma and solar-assisted gasification, chemical looping, and integration with carbon capture, artificial intelligence (AI), and the Internet of Things (IoT), show promise in improving process performance and reducing technical and economic hurdles. The review identifies research gaps in catalyst development, feedstock variability, and system integration, emphasizing the need for integrated research, policy, and investment to fully realize the potential of gasification in the clean energy transition and sustainable MSW management. Full article

Biomass gasification is an effective process for converting organic wastes into syngas. Syngas is a biofuel that possesses several potential applications in the energy sector. However, the major bottleneck for the commercialization of this technology is tar production in biomass gasification, which affects gasifier performance and syngas yield/quality. Tar can be destructed by adopting in situ or ex situ modes of utilizing catalysts in biomass gasification. The added advantage of tar reduction is enhanced syngas energy content. Despite their advantages, catalysts face challenges such as high costs, declining performance over time, and difficulties in regeneration and recycling. Deactivation can also occur due to poisoning, fouling, and carbon buildup. While some natural materials have been tested as alternative materials, the financial sustainability and affordability of catalysts remain crucial for large-scale syngas production. This paper offers an overview of tar reduction strategies and the role of various catalysts in the gasification process and future perspectives on catalyst development for biomass gasification. Full article

Sewage sludge, as a by-product of wastewater treatment, poses severe environmental challenges due to its high moisture, ash, and heavy metal content. Thermochemical conversion technologies, including pyrolysis and gasification, offer promising pathways for transforming sludge into valuable products such as bio-oil, biochar, and syngas. This paper systematically reviews recent advancements in pyrolysis and gasification, focusing on process optimization and catalyst development to enhance product quality and energy recovery. In pyrolysis, factors such as temperature, residence time, and heating rate significantly influence product yields and properties, while catalytic and co-pyrolysis approaches further improve product structure and reduce environmental risks. In gasification, parameters like the equivalence ratio, steam-to-sludge ratio, and catalyst application are key to enhancing syngas yield and quality, with biomass co-gasification offering additional benefits. Despite substantial progress, commercialization remains challenged by high operational costs, catalyst durability, and environmental impacts. Future research should emphasize improving sludge pretreatment, optimizing thermochemical processes, developing efficient and cost-effective catalysts, and addressing critical issues such as bio-oil quality, tar management, and syngas purification to promote the industrial application of these technologies. Full article

Hazardous medical waste (HMW) presents significant environmental and public health challenges, particularly in the context of rising healthcare demands and the global push for sustainable resource management. This study investigates the evolution of HMW management through a bibliometric and thematic analysis of 1703 articles published between 2020 and 2025, retrieved from the Web of Science database. Using VOSviewer, co-occurrence mapping and term clustering reveal six major conceptual domains, including thermal treatment technologies, operational optimization, environmental indicators, and behavioral dimensions. This study adds value by applying a dual bibliometric–thematic lens to provide new insights into the operational, technological, and sustainability dimensions of HMW. The analysis identifies a gradual shift from traditional disposal methods to circular models focused on resource valorization through pyrolysis, gasification, and sterilization. Lean management principles—such as process efficiency, waste minimization, and the promotion of recovery and reuse—emerge as complementary to circular economy goals. Additional visualizations outline international collaboration trends, highlighting established research hubs and emerging contributors. The findings emphasize the role of data-driven decision tools, sustainability assessment methods, and cross-sectoral integration in enhancing medical waste systems. Full article

Clean hydrogen is expected to play a crucial role in the future decarbonized energy mix. This places the gasification of biomass as a critical conversion pathway for hydrogen production, owing to its carbon neutrality. However, there is limited research on the direction of the body of literature on this subject matter. Utilising the Bibliometrix package R, this paper conducts a systematic review and bibliometric analysis of the literature on gasification-derived hydrogen production over the previous three decades. The results show a decade-wise spike in hydrogen research, mostly contributed by China, the United States, and Europe, whereas the scientific contribution of Africa on the topic is limited, with less than 6% of the continent’s research output on the subject matter sponsored by African institutions. The current trend of the research is geared towards alignment with the Paris Agreement through feedstock diversification to include renewable sources such as biomass and municipal solid waste and decarbonising the gasification process through carbon-capture technologies. This review reveals a gap in the experimental evaluation of heterogenous organic municipal solid waste for hydrogen production through gasification within the African context. The study provides an incentive for policy actors and researchers to advance the green hydrogen economy in Africa. Full article

Under China’s “dual carbon” goals (carbon peaking and carbon neutrality), the utilization of high-chlorine coal faces significant challenges due to its abundant reserves in regions such as Xinjiang and its notable environmental impacts. This study systematically investigates the combustion characteristics, environmental risks, and control strategies for high-chlorine coal. Key findings reveal that chlorine release occurs in three distinct stages, namely low-temperature desorption, medium-temperature organic bond cleavage, and high-temperature inorganic decomposition, with release kinetics governed by coal metamorphism and the reaction atmosphere. Chlorine synergistically enhances mercury oxidation through low-activation-energy pathways but exacerbates boiler corrosion via chloride–sulfate interactions. Advanced control technologies—such as water washing, calcium-based sorbents, and integrated pyrolysis–gasification systems—demonstrate substantial emission reductions. However, challenges remain in addressing high-temperature corrosion and optimizing multi-pollutant synergistic control. This study provides critical insights into the clean utilization of high-chlorine coal, supporting sustainable energy transitions. Full article

Palm oil production generates substantial underutilized biomass wastes, including empty fruit bunches, fiber, palm kernel shells, and palm oil mill effluent (POME). Waste-to-energy systems offer a viable pathway to convert these residues into electricity and fertilizer, supporting circular economy goals and sustainability targets. This study takes an example of palm oil waste from the Indragiri Hulu region in Riau Province in Indonesia. It develops a multi-objective optimization framework to evaluate palm oil mill WtE systems from economic, environmental, and energy output. Three scenarios are analyzed: maximal profit (MP), maximal profit with carbon tax (MPCT), and all waste processing (AWP). The MP scenario favors high-return technologies such as gasification and incineration, leading to significant greenhouse gas emissions. The MPCT scenario favors lower-emission technologies like composting and excludes high-emission, low-profit options such as POME digestion. In contrast, the AWP scenario mandates the processing of all wastes, leading to the lowest profits and the highest emissions among all scenarios. The sensitivity analysis reveals that POME processing is not feasible when electricity prices are below the government-set rate, but becomes viable once prices exceed this threshold. These findings offer valuable insights for companies and policymakers seeking to develop and implement effective strategies for optimal waste utilization. Full article

Agricultural waste poses significant environmental, economic, and social challenges globally, with estimates indicating that 10–50% of agricultural products are discarded annually as waste. This review explores strategies for managing agricultural waste to mitigate its adverse impacts and promote sustainable development. Agricultural residues, such as those from sugarcane, rice, and wheat, contribute to pollution when improperly disposed of through burning or burying, contaminating soil, water, and air. However, these residues also represent untapped resources for bioenergy production, composting, mulching, and the creation of value-added products like biochar, bioplastics, single-cell protein and biobased building blocks. The paper highlights various solutions, including integrating agricultural waste into livestock feed formulations to reduce competition for human food crops, producing biofuels like ethanol and biodiesel from lignocellulosic materials, and adopting circular economy practices to upcycle waste into high-value products. Technologies such as anaerobic digestion for biogas production and gasification for synthesis gas offer renewable energy alternatives and ample feedstocks for gas fermentation while addressing waste management issues. Composting and vermicomposting enhance soil fertility, while mulching improves moisture retention and reduces erosion. Moreover, the review emphasizes the importance of policy frameworks, public-private partnerships, and farmer education in promoting effective waste management practices. By implementing these strategies, agricultural waste can be transformed into a resource, contributing to food security, environmental conservation, and economic growth. Full article

Biomass fluidized bed gasification technology has attracted significant attention due to its high efficiency and clean energy conversion capabilities. However, its industrial application has been limited by insufficient technological maturity. This paper systematically reviews the research progress on biomass fluidized bed gasification characteristics; compares the applicability of bubbling fluidized beds (BFBs), circulating fluidized beds (CFBs), and dual fluidized beds (DFBs); and highlights the comprehensive advantages of CFBs in large-scale production and tar control. The gas–solid flow characteristics within CFB reactors are highly complex, with factors such as fluidization velocity, gas–solid mixing homogeneity, gas residence time, and particle size distribution directly affecting syngas composition. However, experimental studies have predominantly focused on small-scale setups, failing to characterize the impact of flow dynamics on gasification reactions. Therefore, numerical simulation has become essential for in-depth exploration. Additionally, this study analyzes the influence of different gasification agents (air, oxygen-enriched, oxygen–steam, etc.) on syngas quality. The results demonstrate that oxygen–steam gasification eliminates nitrogen dilution, optimizes reaction kinetics, and significantly enhances syngas quality and hydrogen yield, providing favorable conditions for downstream processes such as green methanol synthesis. Based on the current research landscape, this paper employs numerical simulation to investigate oxygen–steam CFB gasification at a pilot scale (500 kg/h biomass throughput). The results reveal that under conditions of O₂/H₂O = 0.25 and 800 °C, the syngas H₂ volume fraction reaches 43.7%, with a carbon conversion rate exceeding 90%. These findings provide theoretical support for the industrial application of oxygen–steam CFB gasification technology. Full article

Fast microwave pyrolysis technology can effectively convert brown coal into hydrogen-rich syngas. However, the unique pyrolysis behaviour of brown coal under microwave conditions is not fully understood in comparison with conventional pyrolysis. This study used Victorian brown coal as a raw material to conduct pyrolysis experiments under conventional and microwave heating methods. The results demonstrate that the microwave-assisted pyrolysis of Victorian brown coal can selectively crack polar functional groups, enhancing H₂ and CO production via radical-driven secondary reactions and gasification, while conventional heating favours the formation of tar containing phenols and fewer aromatic compounds. The result is a high-quality syngas (75.03 vol.%) with a hydrogen yield of 10.28 (mmol Gas/g Coal (daf)) at 700 °C under microwave heating, offering a scalable route for valorising low-rank coals. Full article