Search Results (26)

The rapid growth of tennis participation and the widespread use of lithium-ion batteries have led to increasing volumes of rubber waste and spent battery materials, underscoring the need for integrated recycling strategies. In this work, a thermochemical co-pyrolysis process is developed to convert waste tennis ball rubber particles (TBRPs) and spent lithium-ion battery (LIB) cathodes into valuable products. The decomposition of TBRPs generates reactive gaseous and liquid hydrocarbons that function as in situ reductants, enabling the breakdown of high-valence transition metal oxides in the cathode material. Subsequent magnetic separation and mild acid-washing yield nonmagnetic solids enriched in lithium compounds and carbonaceous residues. Structural and chemical analyses (SEM, XRD, TEM, EDS, and XPS) confirm extensive cathode reduction and the formation of Li₂CO₃ at optimized conditions (650 °C, 1 h, cathode-to-TBRPs mass ratio 1:0.65). The carbonized rubber evolves into a highly porous carbon material with a carbon purity of approximately 95.37 At%. This study demonstrates a low-energy, environmentally friendly pathway for the co-valorization of two challenging waste streams while simultaneously recovering lithium salts, reduced metal oxides, and functional porous carbon. Full article

This manuscript will present an advancement of transformative research that has been conducted at Oak Ridge National Laboratory (ORNL) over a 25-year period (2000–2025) on a variety of environmental and biological matrices. These investigations derived a fundamental understanding of how elemental detection and analysis of these matrices led to the knowledge and discovery of natural processes in plants and the environment. Each project led to the initiation of a new research area which unearthed awesome and novel breakthroughs. Highlights are listed below: 1. The preliminary research at ORNL centered on the detection of aerosols utilizing Laser-induced Breakdown Spectroscopy (LIBS) technology. The Clean Air Act Amendment (CAAA) of 1990 highlighted the importance of identifying hazardous air pollutants (HAPs) due to their impact on environmental and human health, thereby underscoring the need to detect various toxic elements. Research in aerosol chemistry aimed to identify these harmful elements released by factories during periods of increased emissions in their manufacturing processes. LIBS emerged as the most effective method for real-time, in situ measurements of metal species in both gaseous and aerosol phases. 2. An understanding of the presence of total carbon in soils gives perspective on how to develop carbon sequestration strategies. The recognition that carbon sinks can evolve back to carbon sources to emit back to the atmosphere was an important consideration. Also, the concentration of carbon in soil indicates the health of land areas for growing crops successfully. 3. The direct detection of most of the elements in a wood sample in a single emission spectrum, without sample preparation, encouraged the research to use the LIBS technique for preservative treated wood coupled with use of multivariate statistical methodology. Additionally, it encouraged the researchers to try to differentiate natural woods from different parts of the country, and it was successfully demonstrated that LIBS coupled with MVA analysis could differentiate wood of different species from each other and of similar species grown in different environments based on their elemental spectra. This was a breakthrough since it revealed a systematic approach to connect elemental scarcity and abundance to either drought or typical rainfall conditions for the hardwood trees grown in specific areas. 4. Furthermore, the research progressed to reveal physiological and developmental processes contributing to biomass production such that the variation in leaf elemental composition increases our understanding of terrestrial nutrient cycles, as well as tracking the transfer of toxic elements from soils to living organisms. 5. Recently another breakthrough viz., ionomics initiated the correlation of elements to specific genes, uncovering the function that the element performed in the plant. More recently, this has been extended from plants to fungi as well as fungi growing in symbiotic relations with plants. Full article

Utah State University has developed a high-performance “green” hybrid propulsion technology based on the unique electrical breakdown properties of 3D-printed acrylonitrile butadiene styrene. Using 3D-printed ABS as fuel, typical startup sequences require approximately 5–15 joules and, once started, the system can be sequentially fired with no additional energy inputs required. The number of possible ignitions is limited only by the amount of fuel. The most technologically mature version uses gaseous oxygen (GOX) as oxidizer and 3D-printed ABS as fuel. While GOX is mass-efficient, it lacks volumetric efficiency unless highly pressurized. Nytrox, a blend of GOX and nitrous oxide, improves propellant density and volumetric efficiency, while maintaining acceptable levels of mass efficiency (specific impulse). Nytrox can safely self-pressurize, eliminating the need for a separate oxidizer pressurization system and reducing overall complexity. However, employing Nytrox as a direct substitute for GOX results in reduced ignition reliability and considerably increases cold-start ignition latency. This paper quantifies the latency, explores its sources, and analyzes expected behaviors. Solutions include raising combustion and storage pressures to boost oxygen content in Nitrox’s liquid phase and increasing combustion chamber pressure to reduce ignition delays. Full article

Sulfur hexafluoride (SF₆), an extraordinary gas insulation medium, must be replaced by environmentally friendly gas in electric equipment because of its high global warming potential (GWP). In this research work, the DC breakdown properties of R404a gas and its mixtures with N₂ and CO₂ are studied under a sphere–sphere electrode configuration and uniform field conditions. The GWP of R404a is 16% of SF₆ and its liquefaction temperature is also in the suitable range for practical applications. Nitrogen and carbon dioxide are mixed with R404a to reduce its boiling point and GWP. Other important parameters such as the self-recoverability, liquefaction temperature, GWP, and synergistic effect of R404a/CO₂ and R404a/N₂ were also studied to complement the insulation performance and the results are comparable to other gas mixtures. As a result, it was found that both the mixtures containing 80% R404a and 20% N₂ or 20% CO₂ possess a breakdown strength of 0.83 times that of SF₆. Mixtures containing an 80% concentration of R404a possess a GWP equal to only 15% of SF₆. These properties make gaseous mixtures containing 80% R404a and 20% N₂ or CO₂ a suitable alternative to SF₆ in medium-voltage gas-insulated equipment. Full article

Mineral carbonation is a prominent method for carbon sequestration. Atmospheric carbon dioxide (CO₂) is trapped as mineral carbonate precipitates, which are geochemically, geologically, and thermodynamically stable. Carbonate rocks can originate from biogenic or abiogenic origin, whereby the former refers to the breakdown of biofragments and the latter precipitation out of water. Carbonates can also be formed through biologically controlled mechanisms (BCMs), biologically mediated mechanisms (BMMs), and biologically induced mechanisms (BIMs). Microbial carbonate precipitation (MCP) is a BMM occurring through the interaction of organics (extracellular polymeric substances (EPS), cell wall, etc.) and soluble cations facilitating indirect precipitation of carbonate minerals. Microbially induced carbonate precipitation (MICP) is a BIM occurring via different metabolic pathways. Enzyme-driven pathways (carbonic anhydrase (CA) and/or urease), specifically, are promising for the high conversion to calcium carbonate (CaCO₃) precipitation, trapping large quantities of gaseous CO₂. These carbonate precipitates can trap CO₂ via mineral trapping, solubility trapping, and formation trapping and aid in CO₂ leakage reduction in geologic carbon sequestration. Additional experimental research is required to assess the feasibility of MICP for carbon sequestration at large scale for long-term stability of precipitates. Laboratory-scale evaluation can provide preliminary data on preferable metabolic pathways for different materials and their capacity for carbonate precipitation via atmospheric CO₂ versus injected CO₂. Full article

Insulating materials can be classified into solid, liquid, and gaseous forms. Solid insulation materials are divided into different types such as organic, inorganic, and polymer types. In electrical circuits, solid insulation materials are generally used as components that provide insulation and mechanical support. In recent years, as a result of developing technologies, the production of participation insulation materials with 3D printing technology has become widespread. Three-dimensional printing technology enables the rapid creation of objects by combining materials based on digital model data. It is important to evaluate the materials produced with 3D printing in terms of insulation coordination. Studies have shown that the electrical breakdown strength of solid dielectrics varies depending on factors such as sample type, thickness, the magnitude of applied voltage, and the temperature of the physical environment. According to IEC-60243 standards, there are various methods to measure the breakdown strength of solid insulators applied to different voltage types. In this study, the behavior of PLA, ABS, ASA, PETG, and PC/ABS materials produced with 3D printing and having the potential to be used as insulation materials when exposed to high voltage within the scope of insulation coordination was investigated. The breakdown strengths of solid insulation materials produced with 3D printing were measured in the high-voltage laboratory within the scope of IEC-60243. Breakdown strength was statistically evaluated with the Weibull distribution. Damage analysis of the breakdowns in the test specimens was examined in detail with ImageJ software. With the comparative analysis, the behaviors of PLA, ABS, ASA, PETG, and PC/ABS solid insulation materials were revealed and their superiority over each other was determined. Full article

In this study, we examined the impact of droplet size and laser energy on droplet fragmentation and the resulting species composition due to laser irradiation of an acoustically levitated heptane droplet. Using shadowgraphy and spatially resolved laser-induced breakdown spectroscopy (LIBS), we observed two different fragmentation regimes for the conditions studied. The experiments demonstrated that low laser energy densities (<~70 mJ/mm³), designated as regime 1, resulted in a single plasma breakdown event accompanied by broadband emission and C₂ Swan bands, suggesting weak plasma formation. Conversely, high energy densities (>~70 mJ/mm³), designated as regime 2, resulted in multiple plasma breakdowns that resulted in the emission of H_α, O, and N, implying a full laser breakdown in the gaseous reactive mixture. Additionally, in regime 2, we calculated the electron density using Stark broadening of the H_α line and temperature using Boltzmann analysis of O lines at 715 nm and 777 nm. We found that the electron densities and temperatures within the air spark and heptane droplets are quite similar. The findings from this research could impact the design of spray ignition systems and may also aid in validating the modeling efforts of aerosols, droplet breakdown, and ignition. Full article

A nanosecond pulsed non-equilibrium plasma reactor is used to crack hydrocarbons into hydrogen and lighter intermediates at atmospheric pressure and warm temperature. The effects of power, capacitance, breakdown voltage, pulsing frequency, energy per pulse, and carrier gas type are investigated for product generation. Multiple gaseous products including hydrogen and hydrocarbons are calculated and compared at different conditions. A statistical analysis is performed on hydrogen yield for different experimental conditions to determine the significance of the studied parameters. Comparable hydrogen yields are produced when using methane (4 to 22 g-H₂/kWh) as a carrier gas as compared to argon (7 to 14 g-H₂/kWh). Although, notably, the methane carrier is more selective to hydrogen and sensitive to other operating parameters, the argon is not. Statistical analysis shows that plasma power, capacitance, and energy per pulse appear to influence hydrogen yield while pulsing frequency and breakdown voltage do not. A higher yield of hydrogen is achieved with low plasma power and a low energy per pulse, with a low capacitance for both cases of pure CH₄ and pure Ar. The results show that low plasma power based on a low energy per pulse of <10 mJ is preferable for hydrogen production in a batch reactor. This CO₂-free hydrogen production method produces hydrogen from fossil fuels at less than USD 2/kg in electricity. Full article

Air pollution in many major cities is endangering public health and is causing deterioration of the environment. Particulate emissions (PM) contribute to air pollution as they carry toxic polyaromatic hydrocarbons (PAHs) on their surface. Abatement of PM requires continuous strict emission regulation and, in parallel, the development of fuels with reduced formation of PM. Key processes in the formation of PM are the decomposition of hydrocarbon fuels and the synthesis of potential precursors that lead to the formation of benzene rings and thereafter growth to PAHs and eventually PM. Methane, ethane and butane are important components of natural gas and liquefied petroleum gas, and are also widely used in transportation, industrial processes and power generation. This paper reports on a quantitative investigation of the intermediate gaseous species present during pyrolysis of methane, ethane and butane in a laminar flow reactor. The investigation aimed to further the understanding of the decomposition process of these fuels and the subsequent formation of aromatic rings. The pyrolysis of methane, ethane and butane were carried out in a tube reactor under laminar flow conditions and within a temperature range of 869–1213 °C. The fuels were premixed in nitrogen carrier gas at a fixed carbon atom concentration of 10,000 ppm, and were pyrolysed under oxygen-free conditions. Intermediate gaseous species were collected from within the tube reactor at different residence times using a specially designed high-temperature ceramic sampling probe with arrangements to quench and freeze the reactions at entry to the probe. Identification and quantification of intermediate species were carried out using a gas chromatography-flame ionization detector (GC-FID). During methane pyrolysis, it was observed that as the concentration of acetylene increased, the concentration of benzene also increased, suggesting that the benzene ring is formed via the cyclo trimerisation of acetylene. With all three fuels, all intermediate species disappeared at higher temperatures and residence times, suggesting that those species converted into species higher than benzene, for example naphthalene. It was observed that increasing carbon chain length lowered the temperature at which fuel breakdown occurred and also affected the relative abundance of intermediate species. Full article

To meet the global climate goals agreed upon regarding the Paris Agreement, governments and institutions around the world are investigating various technologies to reduce carbon emissions and achieve a net-negative energy system. To this end, integrated solutions that incorporate carbon utilization processes, as well as promote the transition of the fossil fuel-based energy system to carbon-free systems, such as the hydrogen economy, are required. One of the possible pathways is to utilize CO₂ as the base chemical for producing a liquid organic hydrogen carrier (LOHC), using CO₂ as a mediating chemical for delivering H₂ to the site of usage since gaseous and liquid H₂ retain transportation and storage problems. Formic acid is a probable candidate considering its high volumetric H₂ capacity and low toxicity. While previous studies have shown that formic acid is less competitive as an LOHC candidate compared to other chemicals, such as methanol or toluene, the results were based on out-of-date process schemes. Recently, advances have been made in the formic acid production and dehydrogenation processes, and an analysis regarding the recent process configurations could deem formic acid as a feasible option for LOHC. In this study, the potential for using formic acid as an LOHC is evaluated, with respect to the state-of-the-art formic acid production schemes, including the use of heterogeneous catalysts during thermocatalytic and electrochemical formic acid production from CO₂. Assuming a hydrogen distribution system using formic acid as the LOHC, each of the production, transportation, dehydrogenation, and CO₂ recycle sections are separately modeled and evaluated by means of techno-economic analysis (TEA) and life cycle assessment (LCA). Realistic scenarios for hydrogen distribution are established considering the different transportation and CO₂ recovery options; then, the separate scenarios are compared to the results of a liquefied hydrogen distribution scenario. TEA results showed that, while the LOHC system incorporating the thermocatalytic CO₂ hydrogenation to formic acid is more expensive than liquefied H₂ distribution, the electrochemical CO₂ reduction to formic acid system reduces the H₂ distribution cost by 12%. Breakdown of the cost compositions revealed that reduction of steam usage for thermocatalytic processes in the future can make the LOHC system based on thermocatalytic CO₂ hydrogenation to formic acid to be competitive with liquefied H₂ distribution if the production cost could be reduced by 23% and 32%, according to the dehydrogenation mode selected. Using formic acid as a LOHC was shown to be less competitive compared to liquefied H₂ delivery in terms of LCA, but producing formic acid via electrochemical CO₂ reduction was shown to retain the lowest global warming potential among the considered options. Full article

This study deals with gaseous insulation contaminated by free moving particles. Two gases were investigated: SF₆ (0.45 MPa) and a CO₂/O₂ gas mixture (0.75 MPa). Video recordings were used to track a free particle moving between a plate and a Rogowski electrode for validation of a 1D particle motion model. The effect of fixed and free particles (4 or 8 mm, Ø 0.9 mm) on the breakdown voltage and the mean time between breakdowns was determined in a concentric set of electrodes. The value of the breakdown voltage for a free particle was between those of a particle fixed to the enclosure and the central electrode. The particle motion in the concentric case could not be observed in the experimental set-up and was therefore simulated using a 1D model. For the 4 mm free particle, the breakdown seemed to be initiated in the inter-electrode gap in CO₂ and at the crossing in SF₆, while for the 8 mm particle, breakdown occurred at lift-off in both gases. A parameter k describing the width of the time to breakdown distribution was introduced. A low value of k was associated with the breakdown from the particles at the electrodes, while k was larger than 10 when the breakdown was decided during particle flight. Full article

Enhanced albumen quality is reflected in increased thick albumen height, albumen weight, and Haugh unit value, while the antimicrobial, antioxidant, foaming, gelling, viscosity, and elasticity attributes are retained. Improved albumen quality is of benefit to consumers and to the food and health industries. Egg quality often declines during storage because eggs are highly perishable products and are most often not consumed immediately after oviposition. This review provides insights into albumen quality in terms of changes in albumen structure during storage, the influence of storage time and temperature, and the mitigation effects of natural dietary antioxidants of plant origin. During storage, albumen undergoes various physiochemical changes: loss of moisture and gaseous products through the shell pores and breakdown of carbonic acid, which induces albumen pH increases. High albumen pH acts as a catalyst for structural changes in albumen, including degradation of the β-ovomucin subunit and O-glycosidic bonds, collapse of the ovomucin-lysozyme complex, and decline in albumen protein–protein interactions. These culminate in declined albumen quality, characterized by the loss of albumen proteins, such as ovomucin, destabilized foaming and gelling capacity, decreased antimicrobial activity, albumen liquefaction, and reduced viscosity and elasticity. These changes and rates of albumen decline are more conspicuous at ambient temperature compared to low temperatures. Thus, albumen of poor quality due to the loss of functional and biological properties cannot be harnessed as a functional food, as an ingredient in food processing industries, and for its active compounds for drug creation in the health industry. The use of refrigerators, coatings, and thermal and non-thermal treatments to preserve albumen quality during storage are limited by huge financial costs, the skilled operations required, environmental pollution, and residue and toxicity effects. Nutritional interventions, including supplementation with natural antioxidants of plant origin in the diets of laying hens, have a promising potential as natural shelf-life extenders. Since they are safe, without residue effects, the bioactive compounds could be transferred to the egg. Natural antioxidants of plant origin have been found to increase albumen radical scavenging activity, increase the total antioxidant capacity of albumen, reduce the protein carbonyl and malondialdehyde (MDA) content of albumen, and prevent oxidative damage to the magnum, thereby eliminating the transfer of toxins to the egg. These products are targeted towards attenuating oxidative species and inhibiting or slowing down the rates of lipid and protein peroxidation, thereby enhancing egg quality and extending the shelf life of albumen. Full article

Homo-acetogens are microbes that have the ability to grow on gaseous substrates such as H₂/CO₂/CO and produce acetic acid as the main product of their metabolism through a metabolic process called reductive acetogenesis. These acetogens are dispersed in nature and are found to grow in various biotopes on land, water and sediments. They are also commonly found in the gastro-intestinal track of herbivores that rely on a symbiotic relationship with microbes in order to breakdown lignocellulosic biomass to provide the animal with nutrients and energy. For this motive, the fermentation scheme that occurs in the rumen has been described equivalent to a consolidated bioprocessing fermentation for the production of bioproducts derived from livestock. This paper reviews current knowledge of homo-acetogenesis and its potential to improve efficiency in the rumen for production of bioproducts by replacing methanogens, the principal H₂-scavengers in the rumen, thus serving as a form of carbon sink by deviating the formation of methane into bioproducts. In this review, we discuss the main strategies employed by the livestock industry to achieve methanogenesis inhibition, and also explore homo-acetogenic microorganisms and evaluate the members for potential traits and characteristics that may favor competitive advantage over methanogenesis, making them prospective candidates for competing with methanogens in ruminant animals. Full article

The currently used bulk analysis and depth profiling methods for hydrogen in inorganic materials and inorganic coatings are reviewed. Bulk analysis of hydrogen is based on fusion of macroscopic samples in an inert gas and the detection of the thereby released gaseous H₂ using inert gas fusion (IGF) and thermal desorption spectroscopy (TDS). They offer excellent accuracy and sensitivity. Depth profiling methods involve glow discharge optical emission spectroscopy and mass spectrometry (GDOES and GDMS), laser-induced breakdown spectroscopy (LIBS), secondary ion mass spectrometry (SIMS), nuclear reaction analysis (NRA), and elastic recoil detection analysis (ERDA). The principles of all these methods are explained in terms of the methodology, calibration procedures, analytical performance, and major application areas. The synergies and the complementarity of various methods of hydrogen analysis are described. The existing literature about these methods is critically evaluated, and major papers concerning each method are listed. Full article

At present, studying the parameters of shock waves at pressures up to 20 GPa entails a number of practical difficulties. In order to describe the propagation of shock waves, their initial parameters on the wall of the explosion cavity need to be known. With the determination of initial parameters, pressures in the near zone of the explosion can be calculated, and the choice of explosives can be substantiated. Therefore, developing a method for estimating shock wave parameters on an explosion cavity wall during the refraction of a detonation wave is an important problem in blast mining. This article proposes a method based on the theory of breakdown of an arbitrary discontinuity (the Riemann problem) to determine the shock wave parameters on the wall of the explosion cavity. Two possible variants of detonation wave refraction on the explosion cavity wall are described. This manuscript compares the parameters on the explosion cavity wall when using emulsion explosives with those obtained using cheap granular ANFO explosives. The detonative decomposition of emulsion explosives is also considered, and an equation of state for gaseous explosion products is proposed, which enables the estimation of detonation parameters while accounting for the incompressible volume of molecules (covolume) at the Chapman–Jouguet point. Full article