Search Results (71)

Pixelated detectors based on inorganic scintillation materials are widely used in radiation detection systems for medical imaging and many other fields of science and technology. A substantial application is X-ray scanning using flat-panel detectors (FPDs) for both fluorography and mammography. In this article, the detection properties of the monolithic planar ceramic scintillation elements are reported for the first time. A high-light yield (Gd,Y)₃Al₂Ga₃O₁₂:Ce,Mg garnet-type scintillation material was used to form square-shaped pixels, while a material of similar composition was used as a substrate. Green bodies were successfully fabricated by a digital light processing (DLP) 3D printing method. Subsequent debinding and pressureless high-temperature sintering resulted in composite elements consisting of two layers with different chemical compositions. The lower bulk layer consisted of transparent, non-luminescent garnet, whereas the upper pixelated layer, with pixel dimensions of 230 × 230 µm, was made of scintillation material. The spatial resolution of the matrices under UV light and alpha-particle excitation was evaluated. It was confirmed that the spatial resolution of the matrices produced by the developed technology is approximately 0.4 times the pixel size. The proven ability of the integrated technology of inorganic scintillation matrix production opens the way for future improvement in spatial resolution through optimizing the printed pixel dimensions. Full article

In this work, we report the fabrication and characterization of single-film and double-film composite epitaxial garnet structures based on single-crystalline films (SCFs) and bulk single-crystal (SC) scintillators for enhanced α–γ discrimination in mixed radiation fields. These composite scintillators consist of TbAG:Ce and YAG:Ce SCFs grown by liquid-phase epitaxy (LPE) on Czochralski-grown Gd₃Ga_2.5Al_2.5O₁₂ (GAGG:Ce) bulk SC substrates. Single- and double-film architectures were designed to optimize the energy absorption and pulse-shape discrimination (PSD) performance for low-penetrating α-particles and high-energy γ-rays. Energy calibration was performed using different γ-ray sources (⁵⁷Co, ⁵¹Cr, and ¹³⁷Cs), enabling the conversion of detector signals to a calibrated electron-equivalent energy scale (keVee). Integration gates were systematically optimized, yielding maximum figures of merit (FOM) of 1.4 for the GAGG:Ce SC substrate, 1.9 for the single-film composite, and 5.0 for the double-film composite, demonstrating a progressive improvement in α–γ discrimination with increasing structural complexity. Two-dimensional PSD density maps reveal well-separated α and γ events, with the highest separation observed for the double-film composite. These results indicate that the engineering of LPE-grown composites provides tunable scintillation decay profiles, enhanced temporal separation, and increased light yields, making them promising candidates for applications such as mixed radiation field detection, dosimetry, and radiation monitoring. Full article

Cs₃Cu₂I₅ single crystals are regarded as promising next-generation scintillators due to their large Stokes shift and low self-absorption characteristics. However, the cost-effective solution growth method faces critical challenges: the instability of colloidal precursors in solutions and the severe oxidation of Cu⁺ during crystal growth. This study innovatively introduces yttrium chloride (YCl₃) as a dual-functional additive to address both issues simultaneously. The hydrolysis of YCl₃ creates a controlled acidic environment, effectively suppressing the oxidation of Cu⁺; meanwhile, it enhances the stability of colloidal precursors by significantly increasing their surface charge and narrowing the particle size distribution. These synergistic effects enable the rapid growth (approximately 100 h) of near-centimeter-sized Cs₃Cu₂I₅ single crystals with high crystallinity, without the need for inert gas protection. The optimized crystals exhibit exceptional performance: a photoluminescence quantum yield (PLQY) of 93.22% ± 0.47%, a scintillation decay time of 210.04 ns, and a light yield of ~738.14 pe/MeV. This YCl₃-mediated growth strategy establishes an efficient approach for the solution-based synthesis of high-quality Cs₃Cu₂I₅ single crystals, holding great significance for advancing high-sensitivity, environment-stable radiation detection applications such as medical diagnostics and nuclear safety monitoring. Full article

Focusing on enhancing the performance of the ¹⁴C method in determining biomass–coal co-combustion ratios, this study developed two novel sample preparation systems: a direct flue gas injection benzene synthesis system based on Liquid Scintillation Counting (LSC) and a direct flue gas sealing graphitization system based on Accelerator Mass Spectrometry (AMS). These systems reduced sample preparation time from 20–24 h to 6–8 h. Experimental validation showed relative errors in biomass blending ratios (1–40%) below ±4% for LSC and ±3% for AMS, except at the 1% blending condition. Compared with conventional methods, both accuracy and efficiency were significantly improved. An enhanced ¹⁴C-based industrial measurement scheme was established and successfully applied for monitoring biomass blending ratios (15–50%) in industrial facilities. Deviations between AMS and LSC were within ±3%, confirming the method’s accuracy, despite discrepancies with the Distributed Control System (DCS) estimates. Additionally, predictive formulas for ¹⁴C activity in biomass and air CO₂ reduced economic investment, with relative errors from ±0.04% to ±3.25%. Overall, the new scheme improved accuracy by 50%, efficiency by 60%, and reduced detection costs by 60–80%, demonstrating feasibility and practical value for industrial applications. Full article

The optical and vibrational responses of Gd₃Ga₅O₁₂ (GGG) single crystals to 147 MeV Kr-ion irradiations were systematically investigated to clarify defect formation pathways and their influence on luminescence mechanisms. Absorption spectra measured at room temperature reveal a stepwise redshift of the fundamental edge and the progressive development of a broad sub-band-gap tail between 4.4 and 5.3 eV, indicating the accumulation of F- and F⁺-type oxygen-vacancy centers and increasing structural disorder. Raman spectroscopy shows that, despite substantial track overlap at fluences up to 10¹⁴ ions/cm², the crystal preserves its phonon frequencies and linewidths, while peak intensities decrease due to a growing disordered volume fraction. Low-temperature (13 K) photoluminescence demonstrates the persistence of a dominant broad band near 2.4 eV and the emergence of an additional irradiation-induced band at ~2.75 eV whose width increases with fluence, reflecting the formation of vacancy-related defect complexes. Excitation spectra transform from band-edge-dominated behavior in the pristine crystal to defect-tail-mediated excitation in heavily irradiated samples. These results provide a consistent spectroscopic picture of ion-track-induced disorder in GGG and identify the defect states governing its luminescence under extreme irradiation conditions. Full article

Currently, the use of scintillation crystals connected via optical fiber to a luminescence spectrometer (so-called fiber-optic dosimeters) offers a promising approach for real-time dosimetric measurements during brachytherapy treatments with γ-ray sources. This study aims to evaluate the applicability of fiber-optic dosimeters for in situ dose measurements during brachytherapy procedures, using Al₂O₃:C and Al₂O₃:C,Mg crystals, which have near-tissue density and effective atomic number (ρ = 3.99 g/cm³, Z_eff = 10.8), as well as heavy GAGG:Ce scintillation crystals (ρ = 6.63 g/cm³, Z_eff = 54.4). Radiation dose delivery was assessed through measurements of the resulting radioluminescence of the aforementioned scintillation crystals, connected via long optical fibers and recorded with highly sensitive, compact luminescence spectrometers. Measurements were performed in a dedicated phantom under clinical conditions at the Oncology Center in Bydgoszcz, Poland. The dosimeters were evaluated for in situ dose monitoring within the 0.5–8 Gy range during brachytherapy procedures using a ¹⁹²Ir (392 keV) source. The results showed a clear linear relationship between the delivered radiation dose and the scintillation output measured by the fiber-optic detector. The Gd₃Al_2.5Ga_2.5O₁₂:Ce crystal detector exhibited excellent linearity, while the Al₂O₃:C and Al₂O₃:C,Mg crystal detectors also showed a nearly linear dose–response relationship. Full article

This study presents a comprehensive Raman spectroscopic and mechanical investigation of Gd₃Ga₅O₁₂ (GGG) single crystals irradiated with 231 MeV ¹³¹Xe ions at fluences ranging from 1 × 10¹¹ to 3.3 × 10¹³ ions/cm². Raman analysis reveals that all fundamental vibrational modes of the garnet structure remain observable up to the highest fluence, with the preservation of garnet crystalline topology/absence of secondary crystalline phases. However, significant line broadening (FWHM increase by 20–100%) and low-frequency shifts indicate progressive lattice disorder and phonon-defect scattering. High-frequency Ga-O stretching modes (A_1g, T_2g ~740 cm⁻¹) remain the most resistant to irradiation, while low-energy translational modes involving Gd³⁺ ions exhibit pronounced degradation and partial disappearance at high fluence. Complementary nanoindentation measurements show radiation-induced softening: hardness decreases by up to ≈60% at 3.3 × 10¹³ ions/cm², consistent with amorphization and overlapping ion tracks (~10–12 μm deep). Raman spectroscopy shows that the garnet lattice remains as the only crystalline phase up to 3.3 × 10¹³ ions/cm², while significant line broadening, mode suppression and a strong hardness decrease indicate progressive structural disorder and partial amorphization of the near-surface region. These results demonstrate that GGG maintains crystalline integrity below the track-overlap threshold (~6 keV/nm) but undergoes strong structural relaxation and mechanical weakening once this limit is exceeded. A new analytical methodology has been developed to quantify radiation-induced structural degradation. Full article

To achieve a substantial enhancement in thermodynamic efficiency, Generation IV nuclear reactors are designed to operate at significantly elevated temperatures compared to conventional reactors. Moreover, they typically employ a fast neutron spectrum, characterized by higher neutron energy and flux. This combination results in a considerably more intense radiation environment within the core relative to traditional thermal neutron reactors. Therefore, the measurement of neutron flux in the core of Generation IV nuclear reactors faces the challenge of a high-temperature and high-radiation environment. Conventional neutron flux monitoring equipment—including fission chambers, gas ionization chambers, scintillator detectors, and silicon or germanium semiconductor detectors—faces considerable challenges in Generation IV reactor conditions. Under high temperatures and intense radiation, these sensors often experience severe performance degradation, significant signal distortion, or complete obliteration of the output signal by noise. This inherent limitation renders them unsuitable for the aforementioned applications. Consequently, significant global research efforts are focused on developing neutron detectors capable of withstanding high-temperature and high-irradiation environments. The objective is to enable accurate neutron flux measurements both inside and outside the reactor core, which are essential for obtaining key operational parameters. In summary, the four different types of neutron detectors have different performance characteristics and are suitable for different operating environments. This review focuses on 4H-SiC, diamond detectors, high-temperature fission chambers, and self-powered neutron detectors. It surveys recent research progress in high-temperature neutron flux monitoring, analyzing key technological aspects such as their high-temperature and radiation resistance, compact size, and high sensitivity. The article also examines their application areas, current development status, and offers perspectives on future research directions. Full article

This work investigates a comprehensive temperature-dependent photoluminescence (PL) study (7–300 K) of β-Ga₂O₃ single crystals under 250 nm excitation. The emission consists of three competing bands at ~3.55 eV (J₁), ~3.37 eV (J₂), and ~3.07 eV (J₃), exhibiting a redshift, band broadening, and a crossover near ~140 K with increasing temperature. The novelty of this study lies in the first quantitative investigation of the temperature-dependent photoluminescence of undoped β-Ga₂O₃ single crystals, revealing activation, trap-release, and phonon-coupling parameters that define the competition between STE (Self-trapped exciton)- and DAP-related emission channels. A two-channel Arrhenius analysis of global thermal quenching at E_max (at maximum PL), J₁, and J₂ reveals a common shallow barrier (E₁ = 7–12 meV) alongside deeper, band-specific barriers (E₂ = 27 meV for J₁ and 125 meV for J₂). The J₃ band shows non-monotonic intensity (dip–peak–quench) reproduced by a trap-assisted generation model with a release energy E_rel = 50 meV. Linewidth analysis yields effective phonon energies (E_ph ≈ 40–46 meV), indicating strong electron–phonon coupling and a transition to multi-phonon broadening at higher temperatures. These results establish a coherent picture of thermally driven redistribution from near-edge STE-like states to deeper defect centers and provide quantitative targets (activation and phonon energies) for defect engineering in β-Ga₂O₃-based optoelectronic and scintillation materials. Full article

In high energy density physics, the demand for precise detection of nanosecond-level fast physical processes is high. Ga:ZnO (GZO), GaN, and other fast scintillators are widely used in pulsed signal detection. However, many of them, especially wide-bandgap materials, still face issues of low luminous intensity and significant self-absorption. Therefore, an enhanced method was proposed to tune the wavelength of materials via coating perovskite quantum dot (QD) films. Three-layer samples based on GZO were primarily investigated and characterized. Radioluminescence (RL) spectra from each face of the samples, as well as their decay times, were obtained. Lower temperatures further enhanced the luminous intensity of the samples. Its overall luminous intensity increased by 2.7 times at 60 K compared to room temperature. The changes in the RL processes caused by perovskite QD and low temperatures were discussed using the light tuning and transporting model. In addition, an experiment under a pico-second electron beam was conducted to verify their pulse response and decay time. Accordingly, the samples were successfully applied in beam state monitoring of nanosecond pulsed proton beams, which indicates that GZO wafer coating with perovskite QD films has broad application prospects in pulsed radiation detection. Full article

New scintillation transparent ceramics Y₃Al_2.5Ga_2.5O₁₂:Ce, Mg has been produced and evaluated for the first time. The material possesses a density of 5.17 g/cm³, a highlight yield of 44,000 ph/MeV, and an effective scintillation kinetics decay constant of 47 ns. This unique combination of the parameters makes it superior to YAG:Ce. Production of the material does not include tooling from precious materials, and the rate of the crystalline mass production is not limited by the pulling rate of the crystal growth process. It can be quite prospective to upgrade the detection units of a variety of X-ray imaging devices. The mechanism of the scintillation light yield enhancement and kinetics shortening in the material are discussed as well. Full article

In this study, Lu_2.5Y_0.5(Al_2.5Ga_2.5)O₁₂ (LuYAGG) single-crystal scintillators doped with terbium ions (Tb³⁺) at concentrations of 0.5, 1, 5, and 10 mol% were successfully synthesized using the floating zone method. The structural, optical, photoluminescence (PL), and scintillation properties of the Tb³⁺-doped crystals were systematically investigated with a focus on their potential for high-performance scintillator applications. X-ray diffraction (XRD) confirmed the formation of a pure garnet phase without any secondary phases, indicating the successful incorporation of Tb³⁺ into the LuYAGG lattice. Optical transmittance spectra revealed high transparency in the visible range. Photoluminescence measurements showed characteristic Tb³⁺ emission peaks, with the strongest green emission observed from the ⁵D₄ → ⁷F₅ transition, particularly for the 5 mol% sample. The PL decay curves further confirmed that this concentration offers a favorable balance between radiative efficiency and minimal non-radiative losses. Under γ-ray excitation, the 5 mol% Tb³⁺-doped crystal exhibited the highest light yield, surpassing the performance of other concentrations and even outperforming Bi₄Ge₃O₁₂ (BGO) in relative comparison, with an estimated yield of approximately 60,000 photons/MeV. Scintillation decay time analysis revealed that the 5 mol% sample also possessed the fastest decay component, indicating its superior capability for radiation detection. Although 10 mol% Tb³⁺ still showed good performance, slight quenching effects were observed, while lower concentrations (0.5 and 1 mol%) suffered from longer decay and lower emission efficiency due to limited activator density. These findings clearly identify with 5 mol% Tb³⁺ as the optimal dopant level in LuYAGG single crystals, offering a synergistic combination of high light yield and excellent optical transparency. This work highlights the strong potential of LuYAGG:Tb³⁺ as a promising candidate for the next-generation scintillator materials used in medical imaging, security scanning, and high-energy physics applications. Full article

With its unique environment and strategic value, the near space (NS) has become the focus of global scientific and technological, military, and commercial fields. Aiming at the problem of communication interruption when the aircraft re-enters the atmosphere, to ensure the needs of communication, navigation, and telemetry, tracking, and command (TT&C), this paper proposes an overall integration of communication, navigation, and TT&C (ICNT) signals scheme based on the K/Ka frequency band. Firstly, the K/Ka frequency band is selected according to the ITU frequency division, high-speed communication requirements, advantages of space-based over-the-horizon relay, overcoming the blackout problem, and the development trend of high frequencies. Secondly, the influence of the physical characteristics of the NS on ICNT is analyzed through simulation. The results show that when the K/Ka signal is transmitted in the NS, the path loss changes significantly with the elevation angle. The bottom layer loss at an elevation angle of 90° is between 143.5 and 150.5 dB, and the top layer loss is between 157.5 and 164.4 dB; the maximum attenuation of the bottom layer and the top layer at an elevation angle of 0° is close to 180 dB and 187 dB, respectively. In terms of rainfall attenuation, when a 30 GHz signal passes through a 100 km rain area under moderate rain conditions, the horizontal and vertical polarization losses reach 225 dB and 185 dB, respectively, and the rainfall attenuation increases with the increase in frequency. For gas absorption, the loss of water vapor is higher than that of oxygen molecules; when a 30 GHz signal is transmitted for 100 km, the loss of water vapor is 17 dB, while that of oxygen is 2 dB. The loss of clouds and fog is relatively small, less than 1 dB. Increasing the frequency and the antenna elevation angle can reduce the atmospheric scintillation. In addition, factors such as the plasma sheath and multipath also affect the signal propagation. In terms of modulation technology, the constant envelope signal shows an advantage in spectral efficiency; the new integrated signal obtained by integrating communication, navigation, and TT&C signals into a single K/Ka frequency point has excellent characteristics in the simulation of power spectral density (PSD) and autocorrelation function (ACF), verifying the feasibility of the scheme. The proposed ICNT scheme is expected to provide an innovative solution example for the communication, navigation, and TT&C requirements of NS vehicles during the re-entry phase. Full article

The performance of ultrafast scintillators under ultrahigh dose rate is highly important for applications utilizing brilliant radiation sources. In this work, the scintillation properties of β-Ga₂O₃, a high-performance ultrafast wide-bandgap semiconductor scintillator, are systematically investigated under dose rates of 10⁷ to 10⁹ Gy/s for the first time by employing ultrashort high-charge electron bunches (bunch charge from 500 fC to 50 pC) generated from a superconducting radio-frequency accelerator. Our results show that in spite of the ultrahigh dose rate, the scintillation intensity was still linearly proportional to the electron bunch charge. Lifetime analysis reveals a fast decay component ranging from 3 to 4 ns, along with an average lifetime of 20 ns. These findings establish a solid foundation for the application of β-Ga₂O₃ as the scintillation material for high-charge electron sources such as laser-wakefield accelerated electrons. Full article

This paper presents the initial results of the synthesis of β-Ga₂O₃ luminescent ceramics via plasma gas-thermal spraying synthesis, where low-temperature plasma of an argon and nitrogen mixture was employed. A direct current electric arc generator of high-enthalpy plasma jet with a self-aligning arc length and an expanding channel of an output electrode served as a plasma source. The feedstock material consisted of a polydisperse powder of monocrystalline β-Ga₂O₃ with particle sizes ranging from 5 to 50 μm. The study presents the results of both theoretical and experimental studies on the heating rate and average temperature of gallium oxide particles in a plasma jet. The results of computational modelling of the synthesis process of β-Ga₂O₃ via plasma gas-thermal spraying are shown. The obtained ceramic samples were characterized using scanning electron microscopy and X-ray diffraction analysis. Our results indicate that the synthesis process yielded ceramics with a layered texture. The stoichiometric composition of ceramics exhibited a shift towards gallium-rich content. X-ray diffraction data demonstrated a reduction in the lattice parameters and unit cell volume of β-Ga₂O₃ ceramic structure. Radioluminescence spectra of β-Ga₂O₃ ceramics revealed an intensive emission band with a maximum at ~360 nm and non-exponential decay. The synthesized β-Ga₂O₃ ceramics possess potential applications in scintillation detectors. Full article